X2-01 newer version firmware problem

Can we replace new firmware to older??
If there is solution plzzz tell me..!

My Nokia X2-01 was updated to v8.70 currently and am facing problems too. Can't download anything on my phone. And I go to Nokia Ovi store app,it tells me to update the version before it proceeds and when I select download it loads for a while and tells me service not available! But my phone was working fine when it was version 28-10-10. I thought the upgrade was to improve the performance of the phone but it's now giving me lots of problems. Does anybody have a solution to this problem. Or do anyone know how to downgrade to the older version it was before? Please I need fast help and a solution that works and dont tell me to go to Nokia center cos I don't have one in my area.

Similar Messages

New Version error - problem with audio config

iTunes has been working great on Vista so when I was prompted to download the new version I thought why not. It unloaded the old version and then loaded the new without a hitch. Went to run the new version and I get the error:
iTunes cannot run because it has detected a problem with your audio configuration.
But nothing has changed! Can anyone shed any light on this?

I can't help you but I have the same problem but with windows xp.
*** really..

Version/Firmware problems WRE54G

I have just bought a WRE54G from Ebay and it doesn't have the version number on the back and I can't get the right firmware and it's a bit annoying!!
I guess it's an old one, it doesn't have ethernet connection. I've read lots of the posts , and found them useful and think my problem may be old firmware, but I've downloaded firmware for 1 and 2 (3 seems the same as 2) but when I try to upgrade it says "wrong firmware". Grrr!
I get the message can't connect to AP in repeater mode, which I see is a bit of a favourite!
Any help you can give will be greatly appreciated.

Done the same, Got 1 off e-bay, All it has is the model number on the back, No Version number. Now when i talk to it with the software its gives a v.104 May 06, 2004. Can this unit with no version number on the back be firmware upgraded??

Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?

Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?

Problem now resolved as I upgraded to Snow Leopard 10.6. Seems App Store doesn't like anything previous to 10.6.

Unable To Install New Version of iTunes (iTunes.msi problem?)

fyi, i also have an iPhone
error message:
the feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.msi in the box below
C:\Documents and Settings\Owner\Local Settings\Application Data\Apple\Apple Software Update\
This is as far as I can go in the installation of iTunes, so I am also unable to get the new iPhone firmware update.

When you get this network resource message, you usually need to do an installer file clean up.
Here is a method for removal of iTunes with installer clean up:
== uninstall with cleanup ==
Download a fresh copy of iTunes and the stand alone version of Quicktime
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
If you hit a problem with one of the uninstalls don't worry, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete and file or folder called Quicktime.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.
===

The new version of iTunes Problems

When the latest version of iTunes was loaded all my playlists and a significant amount of my own music, loaded from CD, as well as lots of duplicate tracks occurred. Does anyone know how to correct these problems? Also is there a way to go back to the previous version of iTunes, this version is HIDEOUS.

CAUTION!!!.
The new version of iTunes 7.0.1. NOT solve iPod video 60Gb freezen problems (firmware 1.2).
When APPLE will solve this problem?.
For when a new iPod video 60Gb update?,
Thanks.
iPod video 60 Gb Windows XP

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.
I tried to loading in "safe mode" but I still could not open Firefox.
I never received a crash i.d.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

Problems with Itunes New Version?

Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0

There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Problems Installing the new version 7 of itunes

I upgraded itunes to the new version 7.0 and when I try to load itunes I get a message "Quick time version 7.1 is installed Itunes requires version 7.1.3 or later version be installed. In the Itunes version 7 you automatic load the new quick time version 7.1.3 with the package. During loading Itunes version 7 I get a message add new missing files or repair damaged files. I select yes, the second choice is to uninstall Itunes. No luck still got the same message above. I tried uninstalling Itunes to see if there was a problem with the oirginal install, still recevied the repair files or add missing files message while downloading. Have also tried installing quick time version 7.1.3 sperately. Nothing seems to work. Any suggestions???
Seems to be this upgrade... I can start quick time and I get the error message when I try and load Itunes?? Can anyone help out??

I was able to fix my problem by going into add and delete programs. Select itunes and there will be an area "click here for support infomation" Check and run repair. Do this for both Itunes and Quick Time, but do Quick time first. After I did that itunes came right up and started to run. Good Luck!!

Problems with the NEW V50 Firmware

Hi all... my nokia 5800 faces some problems here after upgrading to the new V50 firmware, not sure whether have u all encountered it before...
1. Sometimes when typing SMS, the cursor will keep moving backwards and hang there (sounding tut tut tut... continuously and unstoppable)
2. Sometimes the vibration on touching the screen will suddenly become stronger than normal, like suddenly Zeeek, zek, zek rather than normal zek, zek, zek~
I am not sure whther it is common in V50 firmware or it happens only to my specific phone.
Please help !!! Thanks~

A hard reset is needed to clean everything out on your phone. In fact, it is best to do a hard reset BEFORE any firmware update. This is because of possible inconsistencies with system files our own usage may have made. Installation of apps also has an effect, as they create their own system files which are set to be compatible to that of older firmware. New files and new system files coming with the newer firmware adding new features everywhere (this one, v50, in fact from my understanding affects display and icon system files due to the kinetic scrolling in icon menu) may have caused incompatibilities with certain apps. Also one must take into consideration orphaned files caused by installation and uninstallation of apps.
All of these possible incompatibilities may exist on both phone or memory card which both contains system files. First thing, try to run a disk check on the memory card, if nothing happens, you format. If nothing still happens, you reinstall the fw into the phone. If nothing still happens, you put a formatted card and format the phone and reinstall.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Problem with Mappings in the new Version of NWDS

Hello all,
i have a process which created in the NWDS (Version: SAP Enhancement Package 1 for SAP NetWeaver 7.1 SP00 PAT0000) checked in the CVS.
Now i have the process checked out of the CVS in the new Version of NWDS (Version: SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.1 SP01 PAT0003).
The process contains a automated activity and on the output mapping from the webservice is now n error. The Error: "Expected 'com.sap.dictionary.string,ns=.... Found list of 'char10,ns=..." I´ve changed nothing and the input mapping and the other mappings are all right. I checked out again the same process in the "old" Version of NWDS and it works fine.
Knows somebody how i can "import" n process from an older Version of NWDS into the new Version?
Kind regards,
Bastian

Hi Bastian,
The problem you are facing is a trivial problem. You need not worry about the importing the whole development component again. Rather your mapping error can be removed by changing the context in webdynpro perspective easily.
Your error is telling that the automated activity requires a string paramenter and what it has found is a list of parameters.
What this means is in the Webdynpro context, the mapping which you have done has problems.
The webservice input requires a singleton parameter. If you look into the mapping view, you will notice a single icon for the node which you are mapping.
And what you are sending is a list (not a singletion node)
If you see from the left side from where the parameters is coming in you will notice multiple icons (stack on top of each other) representing non singleton nodes ie cardinatlity is 0...n or 1..n)
So to remove the problem just go to component controller of the view and change the context setting
Colletion cardinality of 0..1 or 1..1 and selection cardinality to 0..1 or 1..1 of the node.
Thnks

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

X2-01 newer version firmware problem

Similar Messages

Maybe you are looking for