X2-01. Screen goin white for a sec..!! help..!

Hi thr,hope smeone of u can help me out..!
                   My cell's display suddenly goes white for a second. Had bought it in August & already such a problem. Even if m not using it,it goes white. Showed it to N Care also..no use..it still happens.
The guys over there also cudn't point out d exact prblm..!!
And yeah,havent even put any songs or anything lest it happens again..any anti-virus available??
Have come here with a hope of getting sme solution...
Solved!
Go to Solution.

You dont need anti virus return the device to a Nokia care point for inspection and insist on results,thats no good not been able to unsolve the issue
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

    WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sing out and sing back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Help I just installed the latest update on my IPhone4 and now I can't open any of my stored podcasts. When I hit the podcast icon, the screen goes white for a second and the goes back to the opening page with all the icons. What happened?

    Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?

    Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.

  • How can I get rid of a white screen that appears for 3 secs on startup

    Since my last Thunderbird upgrade to 31.3 I get a white screen for 3 seconds during start-up and before I see my folders.
    I use Thunderbird to access one Yahoo.co.uk account and 2 Outlook.com accounts.
    All plugins are disabled.
    I have one extension, CompactHeader 2.0.9 which I removed but the problem remained. I have now reinstalled it.
    I uninstalled and reinstalled Thunderbird - problem just the same.
    If I start in safe mode there is no white screen, it loads normally straight to folders.
    I'm not sure what to try next so any suggestions are welcome.
    Cheers

    What addons or themes do you have installed?
    What happens if you disable them?
    If you have none, please install beta from http://www.mozilla.org/en-US/thunderbird/channel/ and visit tools | options | advanced | uncheck use hardware acceleration and restart
    is thunderbird better?

  • My mac won't long on the screen is white for ages before main screen then able to log on

    CAn't log on

    Open Startup Disk preferences. Be sure your startup disk is selected. If not select it then click on Restart. At the chime press and hold down the SHIFT key which will force a Safe Mode startup. This takes quite a bit longer than the normal startup. After it has completed restart the computer normally. See if this helps. If not, then do the following:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • G3 screen flashing white and coulors. Help!

    Hi,please help
    the screen in my Ibook G3 starts to flashing white and somethings with a little bit of colour strips.
    I've format the hdd and put fresh copy of OS X 10.4.11 but it didn't help.
    do I need to get a new screen?
    Please help as this is my first mac got it just for few months and i love it
    Thanx

    Hi, Gary. Welcome to Apple Discussions.
    It sounds like you may be having logic board problems. Enough Dual USB G3 iBooks suffered from the logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Do the symptoms look familiar? After leaving it sit overnight, does squeezing the case to the left of the trackpad allow you to start up and work for a bit as long as you keep the pressure on it there? If so, you may want to consider trying the shim fix suggested by John Sawyer in the Apple Discussions iBook G3 (Dual USB) Displays Forum:
    [Y]ou can often fix this yourself by removing the iBook's bottom housing, and placing a shim of any sort, about 1mm to 1.5mm thick, onto the raised square on the bottom shield. I use a Scotch mounting square--you can get them in hardware stores and many grocery stores. When you reinstall the bottom case, it will press against this shim, which will press against the graphics chip, and may allow the chip to come into better contact with the logic board.
    John Sawyer
    CJS Macintosh Repair
    Instructions for removing the lower case:
    iFixit.com
    If the shim fix doesn't work (or you're leery of trying it), DT&T Services in Fremont, California offers the cheapest repair I've found. They have a six-month warranty on the repair.
    Once you get it fixed, try never to pick it up by the left front corner alone. The theory is that picking it up by the left front corner alone can contribute to logic board failure when the case flexes, causing the graphics chip to come loose from the logic board. If you're picking it up in your left hand (as I often do mine), pick it up in the center under the trackpad.
    Good luck.
    Please note: As a G3 iBook is quite old at this point, if you are faced with paying a repair bill on it, it may be wiser to put that money toward a new (or used) MacBook. They are quite a spectacular upgrade from the iBook G3. Again, good luck with whatever you decide to do.

  • Trying to get 4 clips on the screen at once for school project - HELP!!!:)

    Hi there,
    I am trying to finish a school project about a fieldtrip which we have been on over the past few days and want four clips from the movie I have made to be on in the background while the title comes on the screen for each day.
    Can anyone help please? I have seen some plugins but cannot afford to buy them just for this video but am desperate to make it look how I want it!
    Thank you all in advance,
    Matt Williams

    You might try to use the button windows for your seperate movie clips. These can be moved about and enlarged. Try this site, it does a good job with an overview http://www.kenstone.net/fcphomepage/idvd_5stone.html
    The other way if you want only short portions of the four clips you can make them into short quicktime clips and drop them into the dropzones of a theme that has 4 drop zones. You do this by editing your clip (split at playhead) and sharing to QT then put in the drop zone.
    Not entirely sure what you are trying to do but hope that helps.

  • Ipad screen faded white after liquid damage, help?

    So last night my Ipad was on my bedside table, as well as a drink, in the middle of the night i've knocked my drink over and some of it has gone onto my ipad. This morning my screen was normal, but then its started flickering and has gone faded. I left it in some rice for about an hour and it was normal again, and now its gone faded. The touch screen still works as normal. I put it back into some rice for now.
    Any solutions?:(

    Just keep waiting. Unless that water was near one of the ports, it shouldn't have gotten inside the device. But if you are experiencing fading then maybe some did.
    Usually iPads are pretty stable since they use flash memory and no moving parts. If water gets inside it doesn't damage the device as much as it causes damage by causing short circuits. ANd those short circuits are caused by use, so since you've been using it if there is any damage it's probably done. The rice does work, but you need to leave your device in that rice for days, not just an hour.
    Leave it there for a day or so and see if there's still fading. It'll either resolve or be permanent.

  • INSTALLING LION for the first time how long does it take. The screen is white, nothing is happening?

    Installing Lion on a new imac. How long does it take. The screen it white for awhile?

    After downloading it, which can be like watching grass grow, it should take about 20-30 minutes. However, if it's a new computer, why would you installing it?

  • While updating my ipod i noticed that my ipod had froze at the end of it, i then decided to restart it. It began to restart and then the screen went white then restarted itself again and has been on this loop everytime i go to use it. How can i stop this?

    Hi, when i was updating my ipod last night i had noticed it had been doing it for a while. I then realised that it had froze so i just thought to restart it. When I did this it restarted normally by having the apple icon appearing, then the screen went white for a few seconds and the ipod then turned off. Before i even touched another button the ipod restarted again and the white screen appeared again and this has been on a continuse loop everytime I touch a button on my ipod since last night. Please tell me that someone knows what to do!!

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

    My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
    I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
    I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
    When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
    I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
    The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
    My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
    Any help is appreciated.

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

    Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
    The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
    But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
    This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

    Let me know if I should start a new discussion instead of opening a new topic here.
    My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem.  Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source.  Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all.  In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
    Is there any help for this affliction?

  • My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery"  on its screen.

    Hi! My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery"  on its screen. I tried with different chargers, still dead! What's weirder is that my sister who has iPhone 4 experienced the same today! No we don't live in the same house!! Does anyone have the same problem?
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

  • My screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.

    my screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.

    Restore the phone --> http://support.apple.com/kb/HT1808
    If this does not resolve the problem you have a hardware problem.

Maybe you are looking for

  • Equium 200D Vista Home Premium Beta?

    I've just purchased an Equium P200D and after a couple of days I received the follwing message under Computer Management- Problem Reports and Solutions- "_+Upgrade to the latest retail version of Windows Vista"+<<br /> +_The problem was caused by Win

  • Nokia Stereo Headset WH-205 buttons not working in...

    I couldn't get Nokia Stereo Headset WH-205 buttons working in Music player. Anyone know how to enable the buttons on the headset. I want to use the play/stop/FW/BW buttons on the headset Many thanks again

  • Improvements to mac OS updates interface

    Does anyone else find the interface for Mac OS updates annoying?  Here are the problems I have. 1. When an update is available I get a notification that I must do something about - even when I do not want to pay attention to updates. 2. The notificat

  • Executing queries in another schema in an APEX application

    Hello all, I'm using Application Express 2.1.0.00.39 with Oracle Database Express. Following this post (Re: Including a SQL GUI in APEX applications I made a page that executes users' queries. The user inputs his SQL statement in a textarea and submi

  • Please Help! Cases that fit on the 2G still fit on the new touch??

    Sorry this isn't a using iPod touch question but i couldn't find another forum so please help! Do the cases that fit on the iPod touch 2nd generation fit on the new 3rd generation? Because I am considering buying a case for my iPod touch 3G that i ju