X2 how to copy files from memory card to phone?

I would like to copy a picture and a song from memory card to phone memory of my Nokia x2, but I don't know how to. If I take out memory card from the phone now the picture I chose as my screen background disapears I want to have it all the time on the screen no mater if the card is in or out of the phone.
I will be greatefull for advise

I do not have the cable to conect phone with my laptop I just bought this Nokia x2
and I dont know why but my bluetoth laptop conection isn't cooperating with the phone.
Is there a different way to copy these filesfrom memory card to memory of the phone?
On my old SamsungSGH 250E it was very easy to do?
How come a newer phone is so compicated?

Similar Messages

Moving files from Memory Card to Phone Memory on N...

Hi everyone
i have put 8 small trimmed down MP3 files onto my Nokia N95, they are to be used for certain people on my CONTACT list
i sent them from my PC via Bluetooth to the N95 with no problems, they were then saved onto the 2GB Memory card
how do i then move each MP3 from the memory card to the actual phone memory, i take its best to do this as it takes longer to access the MP3`s when they are on the memory card to be used as ringtones?
or should i just leave the MP3`s on the memory card?
also, how do i select an MP3 and then assign it to ALL the individual contacts that i need to in 1 go instead of opening each contact and individually adding an MP3 to each one?
i have forgotten how to do it!
i reset my phone last night with the holding down of the Green, * and 3 buttons
i did this because my phone kept restarting about 3 - 4 times per day by itself, i dont have any applications on my phone or anything, not sure if its safe to put too many things onto the N95 internal memory, i dont wany anymore restarts!!Message Edited by waynester on 05-May-200702:44 PM

First of all if size of your mp3 was a concer then you should have used the Music Manager in PC Suite to convert them to aac as they would be super small in size.
Next use File Manager to move from the card to the phone. Better to sva eringtones on the phone or you would lose the 'link' everytime you take your card out.
Two ways to set the ringtone for everyone. First would be to set it in your profile. And the other would be to set it to Groups... and the last one, each contact at a time.
Ericssson EH 237, Ericsson EH 337, Ericsson GH 388, Siemens S25, Nokia 6210, Nokia 7250, Nokia 6230, Nokia 6280 & O2 Atom , Nokia N95, Nokia 5800 XpressMusic

How 2 move the message from memory card 2 phone me...

did anyone know in nokia N73 how 2
move the message from memory card move
to phone memory???? did anyone know
how 2 move it??? teach me plz.....

Here is an easy way to move your messages from Phone Memory to Memory Card or from Memory Card to Phone memory In Nokia models.
1- Install latest version of Nokia PC Suite and connect your set.
2- Open Nokia Communication Centre. (Select Phone Memory or Memory Card from which you want to move messages to other memory)
3- Select all messages in a single folder (Inbox/Sent Items or from My Folders) and click on file> export. This will create *.csv file.
4- Download NBU Explorer 1.8 from http://www.soft82.com/download/windows/nokia-nbuexplorer/ (You must have installed Windows Installer 3.1 and Microsoft .Net Framework 3.5 to run NBU Explorer. You can easily download these from Microsoft Site,)
5- Open *.csv file in NBU Explorer and click File > Export All. (Your all messages will be exported as *.vmg files.)
6- Disconnect and connect your phone again in Nokia PC Suite.
7- Now set your target memory in your phone for messages.
8- Open Communication Centre and Select your desired folder then click on file > Import messages by selecting multiple messages *.vmg files. (You don’t have to import messages one by one but you can import all messages in a single folder at once)
9- And you have done it.
10- You can import *.csv list in Nokia PC Suite rather *.vmg files, but in this case, all the spaces (blank spaces) in your messages will be lost. All the text of your messages will be merged to a single line. So exporting via NBU Explorer is recommended.
11- Any query? Contact me at ********@yahoo.com.
MODERATOR'S NOTE:
E-mail address has been removed from this post as it is unwise to post such personal information in a public web forum. This is for your personal safety and privacy.
Edited by: Aikin19

How to copy file from application server

Hello experts,
How to copy file from one folder of application server and paste it to other folder of application server(application server is same)?
Is there any function module exists???
thanks in advance
Saurabh

Hi you can use this function module to move a file from application server to another folder on application server.
call function 'WS_FILE_COPY'
           exporting
                destination = m_destination
                source      = m_source
           importing
                return      = return.
Plus u can use this function module to delete the file from that folder from which u want to replace it.
      call function 'WS_FILE_DELETE'
           exporting
                file   = m_source
           importing
                return = return.
The above FM can help u copy a file from one folder to another and delete the file from that folder.

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

How to copy files from a color classic w/broken floppy drive to an i-book ?

How to copy files from a color classic w/broken floppy drive to an i-book ?
I have a Coplor Classic with a system 7.
There is no ethernet on color classic. The floppy drive is dead.
I need some important files I have on the color classic...
How do I connetct them to transfer files?...

The easiest way, as AppleIIFreak has suggested, is probably to find another older Macintosh computer (with the round MiniDIN printer port) to be used as an intermediary. You could then connect the two machines by means of LocalTalk cabling, or just a plain Mac serial printer cable between the printer ports, and then set up file sharing. From that other Mac, you should be able to forward the files via Ethernet, diskettes (if you have an external USB floppy drive for the iBook) or email (Internet).
If a second old Mac is not available, you may want to try something else. It would not be unusual for a Color Classic to have ClarisWorks already (obviously, one cannot expect anything new to become installed). If so, that program suite would contain a communications part. This means that you could connect an external serial modem, and send the files over the phone lines (or locally, modem-to-modem, in principle as in KB article # 22229; sometimes a very simple home-built line simulator may have to be added) to any other computer using a terminal emulation application with file transfer capabilities. It would also be possible to connect the modem port directly to the serial port of a PC, through a combination of a Mac modem cable (MiniDIN-8M to DB-25M) and a standard PC null-modem cable (DB-25F to DB-9F).
Jan

HT1379 Summary: how to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards.

How to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards?
Insert the SD card.
System opens iPhoto with SD contents.
Want to transfer files from SD card to system drive. iPhoto closes
SD card directory removed from the Finder window and is not available again.
I don't want to have to reboot the system every time I want to perform this option.
What's wrong here.
The support columns show this isn't an isolated incident with all sorts of solutions possible.
This is a simple task - there should be a simple method for the system to recognize SD cards.
What's the answer?
I've reviewed a recommendation to reset the SMC.
https://discussions.apple.com/message/18500187#18500187
and
http://support.apple.com/kb/HT3964
and another thread that says, basically, you must buy extra hardware to perform this simple task,
https://discussions.apple.com/message/16911326#16911326
another one that has the same problem with OS Mountian Lion,
https://discussions.apple.com/message/21919740#21919740
another one with the problem that says SD cards can't be read by Apple unless the card is formatted specifically for Apple, ie. that Apple is not compatible with other cards, but the problem maybe something else that requires Apple service - (bad SD card reader?).
https://discussions.apple.com/message/18711818#18711818
there are probably more discussions, but I dont' want to spend my entire sunny in Seattle day working this.
thanks for the help!

Bucky Fullmeister wrote:
When I plug in an SD card, the finder window shows it under the DEVICES section. At this point, I can drag the contents to the hard drive. However, when I screw up and click the character on the right side of the name - it apparently closes the SD card and I can't find any command to reload or re-recognize the card. I have to remove and reinsert the card and then sometimes it recognizes the card. Other times I reboot and it will recognize it.
What does that character on the right side of the SD card name do? Is it an eject function - with no way to subsequently reread the drive?
It ejects or unmounts the card. When the SD card mounts click on it once to highlight it and then drag the files shown within it to the new folder.
Pete

N85 move messages from memory card to phone

my previous n85 was having problems and they have to reformat the phone to make sure it wan'st a software issue. I backed up my messages to the memory card by selecting Memory Card in Memory used settings in Messages. All my messsages are saved in the memory card
now that i have my new (replaced) n85, how can i move those messages back to the phone memory? when i change the memory used, it woundnt ask me whether to move the messages from memory card to phone memory.
help
75% of the people will believe any made-up statistics they see in a signature just like this one.

oh well. i guess i'll just have to start from scratch then. thanks
75% of the people will believe any made-up statistics they see in a signature just like this one.

How to upload photos from memory card to computer on new Officejet 8500A Plus?

I recently replaced an older HP psc 2410 photosmart printer with a new Officejet Pro 8500A Plus printer. The installation went fine without error messages, and it prints, scans and copies just fine. When I insert a memory card into the slot, the printer itself recognizes the files and displays them on the LCD screen and offers to print them. BUT ... what I want to do is upload the files to my PC (running Windows XP), and I can't figure out how to do it! There is no HP program that pops up and offers to transfer the photos like with my old printer. I was also expecting to see the card slots shown as a removeable drive like I did with my old printer, but I don't see them. Also, my Photoshop Elements program doesn't recognize the card slots either.
Then it dawned on me that my computer doesn't "see" the card slots because it's not connected directly to the printer! I set this up as a wireless printer and I am totally new to this, so pardon if this is a dumb question... but is there no way to transfer files from the card slot to the PC in a wireless setup?? I'm totally confused...
This question was solved.
View Solution.

Hi,
If your printer is connected thru network or wireless network, you have to access it thru the IP address.
Find out the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.
Open Windows explorer and type \\xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is the ip address of the printer.
You'll see the memory card slot there.
You can do a "map network drive" to it if you want your printer card slot to be listed there permanently.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Error-36 and Error-42 when copying files from SD card

Hello!
I recently switched from a PC user to a mac user! Everything is great, but ever since I got the computer (refurbished 15in macbook pro) ive had problems with copying files from my SD card to my computer!! It so frustrating! Ive tried everything! I even called apple support, and after 30 minutes of calling came to no solution! I keep getting error-36 error-43 and sometimes error-8058 !!! I tried formatting with no success, because my computer cant read the disk! It is a PNY professtional 32gb sd card. Im not sure if this problem is happening due to the fact that I previousley used this same SD on my PC, but im going to return this computer if it doesnt fix! Ive also tried doing to terminal commands but it doesn't work! Please help!!
- from a distressed youtuber

I'm having similar problems and I'm using a 1Tb HDD ( USB connection) which has 3 partitions. I have discovered that after some time (not clear what triggers it) I start being unable to use one partition for backups. When I checked further I discovered that I cannot write any file no matter what size to it. The problem has normally disappeared for a while when I restart my computer. I've done disk verifies and things are fine. The other two partitions are Ok ... I use one for TimeMachine and the other for SuperDuper. This partition is primarily used for ChronoSync backups so I suspect that the problem is related to how ChronoSync backs up but I have yet to convince their tech support of that.

Copying/Moving messages from Memory card to phone ...

Hello,
I had a nokia 5800, when i was changing my phone, i copied all my (important) text messages to the memory card and later i bought a nokia e71x. I inserted the same memory card and then went to my messages>settings>Other> and changed the path from phone memory to the memory card. All my messages appeared in my inbox.
Now, i want to move all those messages into my phone memory and for some reason i can't do it. I don't wanna access my messages from the memory card cuz its slow. I tried to move all those messages inside the phone and also through PC SUITE but no luck...
SO BASICALLY I WANT TO MOVE ALL MY TEXT MESSAGES FROM THE MEMORY CARD TO PHONE MEMORY.
Can anyone please help?
Thanks in advance.

First of all if size of your mp3 was a concer then you should have used the Music Manager in PC Suite to convert them to aac as they would be super small in size.
Next use File Manager to move from the card to the phone. Better to sva eringtones on the phone or you would lose the 'link' everytime you take your card out.
Two ways to set the ringtone for everyone. First would be to set it in your profile. And the other would be to set it to Groups... and the last one, each contact at a time.
Ericssson EH 237, Ericsson EH 337, Ericsson GH 388, Siemens S25, Nokia 6210, Nokia 7250, Nokia 6230, Nokia 6280 & O2 Atom , Nokia N95, Nokia 5800 XpressMusic

Copy contacts from memory card to BB

Hi!
I just got my blackberry curve 9300 and i'd like to know if it is possible to copy my contacts from Memory Card to BB or would I need a PC/laptop for this function? I've been trying to find the copy finctions for this but could'nt get any on the device. Appreciate the help please, thank you!
Jay

Hi
Need a bit more information to help really.
Do you mean memory card or Sim card?
If memeory card, what format? Is it a backup of contacts on the same 9300?
Rich

Error message when trying to copy files from memory stick to MacBookPro

Trying to copy files from my memory stick to my MacBookPro and have started to get a crazy error message - "Attempting to copy to the disk Macintosh HD failed. You do not have enough access privileges for this operation."
I've never had a problem before today. Any help will be welcomed!

Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
Bryan

How to copy file from server to another machine in network through JSP

Hello!
any body can solve my problem.
i m working in JSP. i want to copy a file from server on which JSP engine is running to another computer in the same network.
i used Java File Object to copy file from one machine to another in network. and its working fine on network. but the problem is when i used the same code in web page there is exception which is Access is Denied. what i should do now.
i m writing the code i m using in my JSP page
String fileToCopy = "C:/oracle/Apache/Apache/htdocs/FAO/FAO_MiddleFrame.jsp";
String destinationDir = "\\\\af09\\c";
File source = new File(fileToCopy);
String fileName1 = source.getName();
if ((!destinationDir.endsWith("\\")) && (!destinationDir.endsWith("/"))) {
destinationDir = destinationDir + "\\";
File destination = new File(destinationDir + fileName1);
if (!destination.exists()) {
if (!destination.createNewFile()) {
//throw new IOException("Unable to create file. May be you don't have permissions.");
byte[] buffer = new byte[1024];
FileInputStream in = new FileInputStream(source);
FileOutputStream outStream = new FileOutputStream(destination);
int bytesRead = 0;
while ((bytesRead = in.read(buffer)) != -1) {
outStream.write(buffer, 0, bytesRead);
out.println("File copied successfully ....");
plz reply me as soon as possible.
i will be very thankful
Saad

Thats the way it works. Cause servlet contaner doesnot allow other machines in the network to access other than machine which it came from as in case of applets. What you can do is if the other machine is also based on webserver or app server .. you can upload the file as it gets to that page do the process.
I would like to hear more on my comments..
Suggestions ??
Ban

Switching music from memory card to phone memory (...

Hi,
i have hardly any space left on my Nokia 5800 memory card, and would like to know how to put some songs onto the phone memory as i have some free space there.
does anybody know how?
(very greatfull)

You can use the file manager on the phone to move items between the memory card and phone. If you have any difficulties with it check out the help section within the application.
You should make sure you leave a bit of space in the phones memory so that you have plenty of space for messages and programs.
It may be a better option to purchase a 16gb memory card instead.

X2 how to copy files from memory card to phone?

Similar Messages

Maybe you are looking for