X2 Plug In USB Cable To Computer and select mass s...

Hello, anyone can help about this Issue? When I plug in My X2 Firmware Version 4.90  using cable to my computer and that have three selection for select 1)Nokia Ovi Suite 2)Media Transfer 3)Mass Storage, I selected the first of two option that see function properly but when i select thrid option (3) "MASS STORAGE" that sure this "Access memory card from connected device. Press done when finished. When i Press Done that show back the three option as mention above, It is this normal or got firmware phone bugs issue. Because some pepole say is handphone problem it is true or not? Pld give any solution or suggesstion. Thank You 
Attachments:
DSC_0003.jpg ‏1961 KB
DSC_0004.jpg ‏2188 KB

Kenny, only press done when you are finished with the mass storage function.

Similar Messages

  • I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

    I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

    You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • HT201263 All of a sudden my Iphone 4 shut off amd will not restart. Ive tried everything from holding the buttons to plugging in the usb to a computer and opening my Itunes. I cant get it to turn on...Please anythoughts???

    All of a sudden my Iphone 4 shut off amd will not TURN ON AT ALL. Ive tried everything from holding the buttons to plugging in the usb to a computer and opening my Itunes. I cant get it to turn on...Please anythoughts???
    <E-mail Edited by Host>

    It was a very bad idea to post your email address where millions of people will see it. Expect your spam to increase exponentially, as well as the phishing attempts. It would probably be a good idea to change your password to a really strong one, and, as you have gmail, look into Google's two factor authentication.
    For your problem, see: What to do if your iPhone will not turn on

  • I purchased an used iPod nano 4th with many many songs on it,but when i hooked the usb cable to try and change the name,something went wrong.i had to reset it,thinking my music would still be there,but i lost everything! Is there any way to get these back

    I purchased an used iPod Nano 4th.with many,many,many songs and albums on it,but when i plugged the usb cable into my laptop(i am a new comer to computer) i thought i was changing the name and thought i was syncing but something went wrong and everything was gone! is there any way possible to get these back? Please I need Help!!! Thank you!

    Was the music purchased via your iTunes account and/or did you buy it from other sources or copy it from your own CDs, or did the music belong to the previous owner ? If the music was yours then you can sync it back to the iPod via your computer's iTunes. If the music is not still on your computer then have you got a backup of it ? If not then for iTunes purchases you might be able to re-download it depending on which country you are in. If the music was put on the iPod by the previous owner then you will need to buy your own copies of it.

  • HT1296 I plugged my phone into mac computer and now everything is gone from phone. How do I get it back?

    I plugged my iphone5 into my computer and now all of my info is gone from phone. How do I get it back?

    When you connected it to thecomputer did it give you any errors?
    Did you have your phone backed up to icloud or to another computer?
    connect your iPhone to your computer with a usb cable
    open iTunes
    go to Storage
    find the "Restore" button
    click on it.
    your data will be restored.

  • Zen Micro Freezes when I plug in USB cable+USB not recognized at ti

    Ok, I know you, the reader, has heard this complaint posted over and over on the Creative forums, and you would probably tell me to SEARCH THE FORUMS. Well, I did, and I found no answer or solution to my problems. So..here goes nothing.
    I recently purchased a Black 5gb Creative Zen Micro, I was really content and happy with it...that is until I plugged it into my USB 2.0 Card. The moment I do that (I've tried plugging it in into every USB 2.0 slot, and NO, this isn't a hub, but a PCI card), The Zen Micro freezes! I have to resolve this by removing the cover and taking out the battery, then reinserting the battery. At the same time my Zen Micro freezes, a little bubble pops up on my computer screen saying "USB Device Not Recognized". I'm going absolutely out of my mind here, and am on the verge of returning the Zen Micro, and might get a replacement, and if that doesn't work, just returning the Zen altogether for a refund and getting a Rio Carbon. I really like the Zen, so PLEASE PLEASE help me out here!
    Things I've Tried That Did Not Work:
    -Uninstall/Reinstalling Zen Explorer, Mediasource (basically everything on CD)
    -Updating the drivers for Zen Micro found on Nomadness.net
    -Updating Firmware for Zen Micro
    -Going into rescue mode and cleaning up, Formatting, reloading firmware, and rebooting.
    -Trying the USB 2.0 Card in different PCI Slots
    -Rotating the order in which I connect the USB cable to Zen Micro and PC
    -Uninstalling/Reinstalling the drivers, even when the Zen Micro pops up as "Unknown Device"
    -Reading tips/hints on Nomadness.net
    I have scoured the forums, and have not found anything useful or new. I know its not the USB 2.0 Card's problem, since I plugged in my USB mouse into all the ports on the USB Card, and it worked fine.
    Note: When I plug the USB cable that came with the Zen Micro into the integrated USB slots on the motherboard (USB .), it at times, does work, but even then, not a high chance of it happening. Even if I do successfully connect the Zen to a USB . slot without it freezing up, the Zen ends up not being detected by any program, like Window Media Player, Mediasource, or Creative Zen Micro Explorer.
    I am going out this weekend and am gonna try to buy a new USB Cable, and if that doesn't work, returning the cable, and returning the Zen Micro to be replaced. AND IF THAT DOES NOT WORK...GOODBYE CREATIVE! HELLO RIO! But please, any help you guys could give would be greatly appreciated. I will also try to contact Creative Customer Support, but I doubt they'll tell me anything new, if I could even connect to them without being put on hold.
    System Specs:
    Windows XP Professional SP2
    Creative Zen Micro Firmware .02.05
    USB 2.0

    Yep, that's exactly my issues to.....no matter what I've done, including replacing the USB 2.0 card which WAS and Adaptec DuoConnect 2.0 card which works fine with every other USB device ever connected to it, the Zen Micro 6g is NOT recognized by Creative Media Source or WMP. It is only recognized by the PC in Device Manager, and it has a yellow marker on it, which tells me the drivers are not installed. I know I don't need the drivers installed, but even after installing them, it tells me the drivers are not installed.
    However, the answer is: it's definitely not the Micro, since it works flawlessly on my other PC and on my Toshiba notebook. So, it's some compatibility issue on that one PC. Since I refuse to let things be, I am reformatting that PC, reinstalling from scratch with WinXP and sp2. This PC has WinXP Pro but it has other issues so a reformat is in order anyway. Hopefully, this will resolve the issues. If not, then I say it's incompatibility with the Intel 865Perl m.b. But I'm at a loss as to why it won't work when plugged into the Adaptec card too.

  • I plugged in USB cable but not showing connected status in my ipod 4th generation

    I plugged in USB cable but not showing connected status in my ipod 4th generation

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • System hangs up on plugging the USB cable from SCXI1600 into my PC

    Hello there,
    My PC hung up twice during installation on plugging the USB cable from SCXI1600 into my PC.  I have installed Labview 7.1
    followed by NI-DAQmx 7.4 drivers.  I then plug in the cable into one of the USB ports and then switch the power on on the chassis,
    SCXI-1000.  My PC immediately goes into safe mode switches off and turns back on.  I do not know why this has happened.  It has worked
    fine prior to this.

    Morning!
    I figured out why my system was switching to safe mode and shutting the moment I plugged in the USB cable from my SCXI-1600.  That was the instruction coming in from Norton Anti-Virus which saw the power and data coming through the USB as a serious intrusion into the system and automatically shuts down even without asking me.  I now need to know how to change the setting on the Anti-Virus to recognise SCXI as a client on my computer.
    Thank you to anyone thinking about this prob.
    Cheers.

  • My ipod touch 4 generation wont charger or connect to my computer but it will charge using a wall charger. The battery was dead so I plugged it in to the Computer and it charged it enough to come on and now that it is on, it wont charger or register.

    My ipod touch 4 generation wont charger or connect to my computer but it will charge using a wall charger. The battery was dead so I plugged it in to the Computer and it charged it enough to come on and now that it is on, it wont charger or register. My sister has the same ipod as me and has no problems charging hers on our computer. Please Help me!!

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1551 I have a USB cable showing up and the iTunes logo, what do I do?

    I have a USB cable showing up and the iTunes logo, what do I do? 

    it's trying to tell you that you need to use an usb cable to connect
    the appletv with a computer running itunes so you can restore the firmware of the appletv

  • I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

    I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
    >CURVEBALL!!!<
    The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
    I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
    Any other suggestions? Please help!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • If I plug my iPhone into a computer, and just want to play non-manually managed music, why does that computer have to be authorized?

    My home base computer has been authorized to play music my friend has downloaded from iTunes.  I can upload that music to my iPhone and play it on the phone without any issue.  When I am at work, I plug my iPhone into my computer and play music through my work computer.  But the music is not manually managed, nothing is being stored on that computer, it simply streams through to the headphone jack, allowing me to use iTunes as a control panel for the phone's music library.
    I can play my own music just fine (because my work computer is authorized for my account).  But I can't play my friend's music, because my work computer isn't authorized for HIS account.  Nor should I expect him to waste one of his 5 authorizations on my work computer.
    But why does it need to be so?  If I'm already authorized to play his songs on my iPhone, then what difference does it make if it's streaming through my work computer or not?  Why does Apple care, and why are my music playing rights being unnecessarily infringed?  I am currently a very unhappy iTunes customer because of this.
    We don't have to buy music from iTunes you know.  If I buy the CD, I can upload it without any of these play rights issues.  I can give my friend my CDs while he gives me his and all of this goes away.  The harder and more user unfriendly playing music from the iTunes Store becomes, the less likely we'll be to buy it.  This is a very simple fix.  If my home base computer is authorized and I can put music on my iPhone, I should be able to play that music off the phone anywhere at any time, so long as I'm not making a copy.  And I am not making copies.  Fix this or we shop elsewhere.

    I spent an hour on the phone w/ apple support this morning. I went through all the trouble shooting and it appears everything is working fine...until you plug the phone in and try to use itunes. Then they put me on hold for 20 min. While they did this i had a guy at work who had an older version of itunes on his cpu plug my phone in. Voila! It popped right up in iTunes. Their product specialist told me to uninstall and reinstall iTunes 8.2. Didn't work. Then they told me to uninstall and reinstall an older version of iTunes. That way I could get music on my phone, but I would not be able to update to the newest version of the iPhone OS. That's great and all, but it really hasn't solved any problems. I'm giving apple the benefit of the doubt due to the fact they just released the newest version of itunes, a new iphone, and a new iphone OS; so there's bound to be bugs and fixes. But that goodwill probably won't last to long. So if they won't fess up to the fact there's a problem w/ the new iTunes soon and fix it I guess they're going to have to give me a new phone.

  • HT203175 I plugged my iPod into the computer and it says that my iPod is synced with another iTunes library, but it's not. So all my music and apps are gone. What can I do to remind the computer its the right iTunes library and get all my stuff back?

    I plugged my iPod into the computer and it says that my iPod is synced with another iTunes library, but it's not. So all my music and apps are gone. What can I do to remind the computer its the right iTunes library and get all my stuff back?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • I have locked myself out of my ipod by entering the wrong password to many times now it tells me to plug it in to the computer and go to itunes when i do that itunes says it cant connect because the ipod is locked im lost at what to do about this anybody

    i have locked my self out of my ipod by entering the wrong password to many times now it tells me to plug it in to the computer and log into itunes when i do itunes tells me it cant open my ipod because its locked does anyone know how to fix this?

    IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Please Get the iPod Touch User Manual for iOS 5

Maybe you are looking for

  • Credit memo to be created with reference to return delivery

    Dear Gurus, We have a requirement for mapping return process Credit memo to be created with reference to return delivery (instead of with reference to return order) Following issue faced in mapping the same: Billing document No. 1234 dated 25.03.2010

  • T400 LCD problem

    hi guys, my t400 lcd does not included led backlight, and i feel it is terribly dim compare to other notebook such as compaq v3000 and hp dv2000, what is going on? i heard someone said t400  lcd without led backlight are good too, but my lcd seems di

  • How to configure BODS in network environment with NAT ?

    Hi Team, Now we are working on POC of BO Data Services 4.0 with SI partner and they reported us that  a communication error (error code:BODI-1241023) occurred when they started a job from Designer.  They can do it without any problems in the followin

  • Photo Shop trial download, HELP!!!!

    Hi, I am having problems downloading the photo shop CS6 trial, it says I need a serial number but yet I have never downloaded photoshop before, what can I do to continue downloading the photo shop trial?

  • Help please with a Static Initializer for ImageIcons inside Jar Files

    At the moment I'm playing around displaying XML using A JTree I am subclassing DefaultMutableTreeNode, and want it to have some default Icons set up.... Sort of like this: public class XNode extends DefaultMutableTreeNode     public static final Imag