X200 - Bluetooth not working & update driver (Windows 7 32-bit)

I have problem in Bluettoth recently in my X200 with Windows 7.
1. it cannot show the devices or dsicovery device at all (empty in Device & Printer)
2. Not able to install latest driver and uninstalled from Control Pannel (missing entry)
Beside, I have other problem such as Active System, & HSPA Driver update as well

Any one can help me to complete uninstall the ThinkPad Bluetooth with Enhanced Data Rate Software in my PC.. I can't find the apps in Control Pannel - Program features in Windows 7. Does Lenovo provide clean apps similar other vendor for such facility..
BTW, does anyone know any upgrade to Bluetooth 3.0

Similar Messages

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

I have a HP Laserjet P2055dn booklet printing is not working anymore. Windows 7 64 bit

I used to do booklet printing on my HP P2055dn; a feature that I loved! Suddently thisfeature stopped and therefore I updated the driver but now it is gone for good.
Under printer properties I used to have "General Printing", "dublex", "Envelops", " Booklet" and "Defaults".but now there is only "General" and "Duplex" the rest is gone.!!!!!.
I am using Windows 7, 64 bit, Word 2010. Neither printer driver P2055dnUPS PC6 nor HP univerals PCL 6 works.
Please note that I still have all the printer properties (above) on my laptop, Win7, 64 bit Word 2007 (old printer driver).
I assume this has something to do with the compatability of Office 2010 AND the Printer driver. I could easily test this by updating the printer driver on my laptop but I am afraid to lose this feature there too. Any useful advice!!!!
Update: I installed the old printer driver and have all printer properties!! There is a problem with HP updated relased in July 2011 !!
Update: although the software shows the booklet prining and envelop option. Booklet prining is not working. So my quess is that the HP frimware update screwed everything up!!! So what do do now?

Hi,
Please update the printer driver with correct version and compatible with Windows version.
Then Open "Devices and Printers" and right click on "Printing Prefences"
Create new Printing Shotcuts as below.
Then go to the other tab Finishing and do exactly like the image.
Apply and Save.
Your Booklet printing and shotcuts is ready. now you can print.
Please let me know if this is being useful for you.

ITunes 10 Not Working Properly on Windows 7 64-bit

Hello all.
I had installed iTunes 10 for Windows 7 64-bit on my Windows 7 64-bit system. After that, my computer would not recognize my iPhone at all, so I uninstalled everything Apple on my computer and reinstalled iTunes 10. Now after reinstallation, my computer recognizes my phone again, but when I open up iTunes, I get this message:
This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
The version of iTunes I have installed IS the 64-bit version (installer name iTunes64Setup.exe from the Apple site). How come iTunes 10 thinks it is not 64-bit and how can I resolve it?
Thanks in advance for any help.
Edit: Just did another install/reinstall, now my phone is back to being completely unrecognized by my computer. I've tried all the suggestions I could find on the Apple site, disabling AV, running as administrator, manually starting Apple Mobile Service, and when I try to update drivers though driver manager, I get an access denied message.
Message was edited by: rwaite

I spent some time on the phone this morning with Apple. Here's a link they sent me: http://support.apple.com/kb/HT1923
It's more than just uninstalling Itunes; there are 5 other apps that have to be uninstalled and in specific order. This particular Knowledge Base article applies to Windows Vista or Windows 7. For other Windows versions you'd have to look up the article for Windows XP.
Hope this helps.

SmartView 11.1.1.3.01 does not work right with Windows 7 64 bit

We have a user running Windows 7 64 bit and Smartview 11.1.1.3.01 that is having a host of issues
1. After initial install SV works as expected
2. If He either shuts his computer down or closes excel and reopens smartview he is not able to save data, nor when doing adhoc query analysis is he able to manually enter dimensions into the cells and click refresh. For example, He will open the connection and ad-hoc query analysis. Drag over the year dimension, enter FY12 in the cell, click refresh and FY12 disappears, he can manually choose it out of the tree and it will stay.
All Windows XP users do not experience this issue
any help would be greatly appreciated
thanx
mike

Which version of MS Office are they using?
Did you confirm the plugin was installed using the run as administrator windows command - as there have been issues when not using this caused problems too.
Can you try using the later version plugin: 11.1.1.3.500. Be careful though that you don't hit the following:
Issue: After upgrading from Smart View v11.1.1.3 to Smart View v11.1.1.3.500, the connection screen box is blank in Excel 2007 on Windows 64-bit systems.
Cause: The registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView was not updated during the upgrade and contained incorrect information.
Solution
In the registry editor, delete the registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView and run the Smart View v11.1.1.3.500 install.
Note: By deleting this key, you will lose stored information for: Connections, Login, Options, Preferences. These will need to be recreated.
Cheers, Iain

PLEASE HELP ME. 12.1.1 itunes does NOT work for my windows 7 64 bit

I have read all the tutorials on here and elsewhere online and nothing works. My cousin goes to school for MIS help and she couldnt even figure out whats going on.
I HAVE DONE THIS NUMEROUS TIMES!
- Made sure my windows had all the necessary updates and everything was installed.
- I uninstalled ALL itunes products in the proper order according to apple discussions.
- Went through all the folders in program files.
- Reinstalled it and I get an error message. ( Apple mobile device service (apple mobile device service) failed to start. Verify that you have sufficient privileges to start system services )
- I have gone through the Services window and tried stopping and restarting the program but I get an error message. (Windows could not start the Apple Mobile Device Service service on Local Computer - Error 1053: the service did not respond to the start or control request in a timely fashion) I have gone through all the start and stop tutorials and none of them have worked.
- I have tried clicking ignore and sometimes it finishes installing but then gives me an new error message. ( iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 193) - I tried reinstalling and nothing.
- I tried finding the ituneshelper download but couldnt find it, I've also tried repairing and nothing works.
- I had downloaded and older version of itunes a few days ago that WAS working the 12.1 version (NOT 12.1.1) but then my cousin came to see if she could fix it and now I can't even download that version.
I am OUT OF options and I dont want to have to spend the money on support. Can some one PLEASE HELP ME!!! I have been trying to fix this for days.

Hi Thank you, the apple mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
I tried this one but it did not work.
iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28)

Microphone not working H420 running Windows 7 64-bit

Have tried two different microphones on H420 - intended use is for the sofware program Dragon. Went through the procedure to set up microphne in Windows 7 and get message that Windows 7 could not hear anything. Uninstalled the Realtek HD Audio Driver, downloaded latest version and installed, still the microphone does not work. Used both the front panel jack and rear jack for microphone, and checked all settings, still microphone doesn't work.

Hello oscartoot
For issues with iTunes crashing on you, check out the article below to go over some options like starting up in Safe Mode.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Regards,
-Norm G

Bluetooth not working, missing driver

I got a Windows XP installation in Boot Camp, for some reason the Bluetooth driver wasn't installed correctly, because whenever I try to add devices it comes up with an error.
I've already tried using the OS X CDs to repair, it goes thru but it doesn't fix the installation.

I tried something different.
If I install Boot Camp & Windows XP and, without updating any, I try using the Magic Mouse and the Wireless Keyboard, it goes thru and works. It seems that there's a Windows update that disables the bluetooth or something?

Is there any fix for the flashplayer installer not working on a windows 7, 64-bit, using firefox?

I Hit the download link, get the permission windows, and the flashplayer installer window comes up, but doesn't do anything. i left it up all day when i went to work, come home 12 hours later and it was still just sitting there not installing. Is there a fix for this? i have looked everywhere and nothing that i have found has worked. even the suggestions on the adobe help page doesn't work..

And you used the offline installers from the link that Andy posted:
Flash Player for Internet Exporer - ActiveX
Flash Player for Firefox - NPAPI
If yes, please post the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash

Itunes not working on my windows 7 64 bit pc

Every time i load itunes it will run for a few seconds and then a box appears Itunes has stopped working.

Hello oscartoot
For issues with iTunes crashing on you, check out the article below to go over some options like starting up in Safe Mode.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Regards,
-Norm G

WINDOWS 8.1 BLUETOOTH NOT WORKING AFTER UPDATE ON ACER V3-571......Solved!!!!!!

Hello everyone, if anyone has had the horrible task of trying to get his or her bluetooth working after upgrading to windows 8.1, then look no further. It took me hours and hours of faffing and fist raging, but in the end, there can be only one. Anyway...Here is your solution.....Ps! I already upgraded to Windows 10, but went back to 8.1 as it trashed my PC and cost me 3.5 half days of painstaking re-install to get my laptop to work again. (WINDOWS 10...DONT BOTHER IN MY OPINION) I have : ACER V3-571 64 BIT WIN 8.1 AGAIN. . IF YOU UPGRADE THIS LAPTOP TO WINDOWS 10...YOUR DOLBY V4 WILL STOP WORKING...was the start of a new nightmare for me. MICROSOFT UPGRADE YOUR ACER WITH THEIR OWN DRIVERS WHEN YOU UPGRADE TO A NEW OPERATING SYSTEM, OFTEN THIS LEADS TO STUPID FIDDLY THINGS LIKE APPS AND APPLICATIONS NO LONGER WORKING.... SO here we go!!! SOLUTION TO BLUETOOTH NOT WORKING V3-571 ACER WIN 8.1 64-----------------------------------------------------------------------------------1) Switch off your bluetooth .........search top right screen > Settings > Bluetooth > Toggle off!2) Right Click your windows logo on the left hand side of your screen > device manager > Bluetooth >Uninstall totally the bluetooth driver and or delete.3) Exit device manager.4) www.google. > find acer drivers > acer website. On website to find drivers, use auto detect serial number > go to your downloads folder >open downloaded auto detector > copy serial number> back to asking box for your serial number >right click > Paste serial number.5)Select operating system from drop down menu (typically windows 8.1)6Drivers > Select Bluetooth Qualcom Atheros Driver 647) Go to downloads on your pc8) Right click the downloaded bluethooth qualcom atheros zip folder > > extract here9) Go into unzipped bluetooth folder > Double Click the installer Icon > Run installer10) Restart PC11) Boom!!! Happy Days.....Nightmare over. YOUR BLUETOOTH WILL NOW CRUISE Hope this will help other people, I had a nightmare for a good few hours trying to get my bluetooth to work again after upgrading to Win 8.1 FROM Win 8.

I am not bothering with windows 10 my friend, it is too much of an newbe baby at the moment and there are just too many bug fixes need doing in my opinion. I did manage to get my dolby home theatre to work again in windows 10, but it was an awful dulled down version with only half the features of the original that came with the version that was on my pc. My plan is to stick to windows 8.1 until it's death. When they withdrawl all the security patches for windows 8.1 and it becomes obsolete, then I will be forced to trash my pc again and go to windows 10, was not much fun mind spending 3.5 days putting everything back to its former state. Hope they do make windows 10 more stable and fix a lot of the bugs. I tried opening videos and pictures in windows 10.... result = missing element errors.... and error, error, error,,, So I think I will wait until 28 July 16 to when the last day of my free upgrade and reservation to windows 10 becomes mandatory. (This is I day before my year to upgrade expires). Thanks for your post. Will

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

My G580 i5 Laptop Bluetooth Not Working Please Help me. Operating system - Window 7

Hi
My lapotp Bluetooth not working after update Lenovo readyCommn 5
Please help me and shotout my Problem
Laptop Detail
Ram -4 GB
Processor - i5
Operating System - Window 7 64 Bit
Wireless working fine only bluetooth problem
Please reslove my issue

I would suggest reinstalling the Bluetooth drivers for your G580
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

Installed iOS7 update and now wifi and Bluetooth not working

My daughters 4s has never skipped a beat - perfectly reliable. Just updated iOS7 with update and now both wifi and Bluetooth not working. Wifi is greyed out and when you go into bluetooth the busy twirly symbol is constantly going round. Can someone please help me as I'm pulling my hair out! My other Daughters iphone 4s is fins BUT she has not downloaded latest update - and she won't until this is resolved. If needs be I will take to store and DEMAND for it to be sorted out - either by repair or replacement as it is wholly a seemingly software issue and nothing wrong with the phone.
Gutted really as I am a huge Apple fan and customer with ipods, phones, iMac & iPads all around. If this is not resolved I fear an Apple drought may begin!

..... ty for the link, however this is the first result googling the issue..... of course it did not work....
it is really unbelivable that plenty 4s devices suffered the wifi troubleshooting just after upgrading to ios7, and finally.... i should burn wifi and bluthoot, and another hardware problems should cause % battery value is disappeared....
all this in one shot....
firmaware is not well working or is somebody bombing our devices to force us to switch to newest?

X200 - Bluetooth not working & update driver (Windows 7 32-bit)

Similar Messages

Maybe you are looking for