X200: Everything's skipping, audio, video, mouse motion...Why?

Hello fellow Lenovites!
I'm running Windows XP on a Thinkpad X200. My problem has been going on for about two months but in the last week has shifted from intermittent to constant. The problem is that all audio or visual display stutters or skips at regular intervals. Audio will go silent, video will jump, the cursor will skip if I move it slowly enough across the screen, and when I hold a single keyboard key, the line of letters will pause. Everything pauses or skips at the same rhythm.
Any help detecting or resolving the issue will be appreciated. All I have at the moment is a prominent but mystifying symptom!
Thanks,
Paul
(Edit: 26 March I changed the subject in case that was throwing people off)

Hello Paul,
It is difficult to work on the laptop with this issue,
You need the drivers ( sound and video) and the most important BIOS
Audio driver can be download from the mentioned below web link.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6ea160ww.exe
BIOS update for 32bit can be download from the mentioned below web link.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6duj46us.exe
BIOS update for 64bit can be download from the mentioned below web link.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6duj46u6.exe
After updating all the drivers check if the issue gets resolved.
If the issue persist then you need to contact the support center if the laptop is in warranty
Country or Region
Language
Telephone number
Hours of operation
United Kingdom
English
01475-897-163
9 AM - 6 PM 
Monday - Friday
08705-500-900
(Standard warranty support)
9 AM - 6 PM 
Monday - Friday
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Everything plays perfect (audio & video). Mute clips after exporting (sounds fine when not exported)

    Alright... this is the 1st time I use Adobe Premiere CS5.5, and I´m using the trial version.
    I hope the image I uploaded is clear, but if I click PLAY while I ´m using the program, everything plays absolutely perfect.
    Problem is when I export. If you can see there, there are like 7 audio bars there, I don´t know if that could be a problem, but I can´t seem to put all of them into a single track.
    The main audio files DO play in the exported movie, but many others do not...
    Any help??? I really need to fix this.

    Microsoft AVI
    preset: custom
    Audio coded: uncompressed
    Channels : stereo
    sample type: 16bit
    Video codec: DV PAL
    ASPECT: D1/DV PAL(1.0940)
    (CHECKED): use max. render quality
    use frame blending
    use previews
    (not checked) render at max. depth
    I hope this is helpful

  • Skipping audio/video with a .mp4 ripped using Handbrake

    Hello!
    I am a relative newbie when it comes to this stuff, so bear with me
    I just used Handbrake to turn my DVD slideshow into an .mp4 file that I want to share online. I got it ripped fine, but it skips through the song and the pictures flip too fast. Am I doing something wrong? I ripped it directly from the .img file that I got as a result of saving the DVD as a disc image.
    Thanks!

    Hello,
    Let's back up a bit. You have created a slideshow. This is your media. iDVD creates a DVD to distribute your media in a specific format (DVD). Instead of using the files from iDVD (which have been compressed for DVD delivery) go back to the original media and re-compress for web content. You don't want to keep compressing-decompressing-compressing and so on. Stick with the original media and compress for delivery.
    Mike

  • Converting MXF files to Apple ProRes 422 HQ generates no audio, video only. Why?

    Hi,
    Does anyone here have experience with Aunsoft TransMXF for Mac or Aunsoft Video Converter for Mac?
    I was using Aunsoft TransMXF for Mac to convert my Cannon C300 MXF files to the Apple ProRes 422 HQ(*.mov) format so that I can import and edit my video footages without rendering in Final Cut Pro X.
    However, the converted MOV file from Aunsoft TransMXF for Mac included no sound, only video (which was in excellent quality though).
    I have played the generated Apple ProRes MOV file in both QuickTime and FCPX, no audio at all.
    But the original MXF files just previewed fine with audio in the camera itself.
    I am not sure if there's anything wrong with my MXF files or with the Aunsoft TransMXF for Mac program.
    Any suggestion here is appreciated!

    Just got the solution.
    I contacted the customer service at Aunsoft and they offered me the workaround. Here shares the information so that people with similar issue could have a reference.
    From Aunsoft:
    Why Canon C300/XF100/XF300 MXF files converted with no sound?
    If your MXF files from Canon C300/XF100/XF300, etc are converted with no sound, or your MXF files previewed in Aunsoft program with only video, please do not worry. It is because Canon MXF contains two audio tracks, one with sound but the other with no sound. Aunsoft TransMXF or Video Converter happens to pick the track without sound by default. This is the reason why the converted output will has no sound but only video.  
    No worries, here’s the solution for this issue:
    On the main interface of your Aunsoft program, click the "Show selected task properties" button on top of the Format box and then select in the Audio Stream ID box a different audio track.
    Then, you can play Canon C300/XF100/XF300 MXF files in the preview window with both audio and video.Meanwhile, the files converted will also be with sound.

  • Weird audio/video offset/ "ghost copies" - please advise

    Hello everyone,
    I'm helping a friend - who has no computer - with a video project, which I have assembled and post-produced for him from DV tapes in iMovie 09.
    Things seemed to work out fine first, but we now run into increasingly bizarre audio/video offset issues, and I'm out of ideas.
    The source material for this film (50 minutes) is circa 400 current video clips, 20 stills and 10 older (1999) material - to which we added circa 50 crossfades, 30 voice-overs and 20 music tracks here and there (which, I guess, makes this a mid-size project). We also slowed down a few clips to adapt timing.
    Here is what happens:
    Around 40 min. into the project, I have muted the sound from quite a few clips and added a music track and voiceover.
    Now when editing and previewing this project within iMovie, everything looks and sounds just fine: The sound from the original clips is muted, and the (music + voiceover) audio tracks play back as they should.
    But once I export this movie (be it as a tiny 3GP clip or an iDVD project), these scenes will have a third, unwanted audio track added: the original sound from the clips following circa +one minute later+ in the movie - at full level, which is embarrassing, to put it mildly.
    E.g., at 40:00, the original sound from the clip at 41:10 is audible with its full level - although both the clip at 40:00 and the one at 41:10 are muted within the project.
    Now I tried everything I could think of.
    I muted all the clips manually.
    I separated the audio from the dubious clips and muted it again, just to make sure.
    I threw out several of the older clips (coming from a VHS tape) used in this project.
    The only effect this has is that these weird offsets/ "ghost" copies move around; they won't disappear.
    I am out of ideas. So here I have an iMovie project which runs fine in iMovie itself - but once exported to iTunes or a DVD, it spits out additional audio material where it shouldn't. Very frustrating, and I cannot pinpoint the source.
    http://support.apple.com/kb/TA26567 describes a similar problem, but this is a 2005 article referring to versions of iMovie and OS X long gone - and the fix it suggests (exporting 12 bit audio to an external FireWire camcorder in 16 bit and re-importing it) is not possible anymore with today's iMovie.
    I would really appreciate if someone could gave me a hint what is happening here, and how to fix this problem.
    Thank you.

    AppleMan1958 wrote:
    Are you using any speed effects? Like Fast motion or slow motion?
    If you stick to the pre-sets (25%, 50%, 200%, 400%, etc.) sound is handled well.
    If you create a custom speed (say 39% or 159%), then sound will be messed up.
    I do in fact use such non-standard values for speed.
    I will try to reset them and see what it does for the resulting movie.
    (And isn't this the kind of bug we wouldn't expect in an Apple product?)
    Anyway, thanks for now. I will report if this helps.

  • Intermittent stalling during audio/video playback

    This issue is driving me up the wall.  I hope someone can help.
    Often, while listening to (for example) iTunes, playback stalls and there is silence for several seconds.  If I listen to music for an hour, I guess I might experience the issue anywhere from 3-6 (?) times — though sometimes I can go for more than an hour without it happening.  But: it doesn't just happen with iTunes — the same thing happens from time to time when using VLC for video playback (usually accompanied by some video artifacts), or HTML5 video playback within Safari.  (I don't have Flash Player installed, though I occasionally use Google Chrome for Flash content; if I recall correctly I think the same thing sometimes happens with Flash videos/audio within Chrome too.)
    Along the same lines, now and then I notice that when attempting an action within Mail.app, a task will appear in the Activity Window that's something like, 'waiting for the hard drive,' with a barber pole and stop sign.  This will delay my action for several seconds.  I suspect this is a different manifestation of the same underlying problem that causes the playback stalling.
    I DON'T typically get the swirling beach ball of doom when any of these things happen.  Mouse pointer does NOT freeze, and the system seems responsive in all other ways during these episodes.
    I'm pretty Mac savvy, and I make sure to do regular hard drive maintenance (verifying volume with Disk Utility, rebuilding directory with DiskWarrior, etc.).  My startup partition is only about 2/3 full.  This week I used iDefrag to defrag the hard drive, thinking it might fix the problem, but nope it still happens.  SMART diagnostics have never shown a problem.
    When researching this issue on the web, some folks have suggested keeping an eye on the log files (Console.app), and Activity Monitor.  I definitely haven't found anything in the log files that coincides with incidents of stalling.  And nothing in particular seems to 'spike' in CPU activity in the Activity Monitor at the same time as the stalling; at least not that I've noticed.
    I'm pretty good about keeping apps up to date, and I don't have too many apps running in the background.  But the problem persists even when I've quit everything else except the app that's doing the audio/video playback.
    This has been going on for a long time, and nothing I've tried has helped.  Any advice or suggestions, anyone??
    - Gord

    Checking Console.app messages once again, the following lines seem to coincide with at least some of the stalling incidents:
    ===
    2013/03/05 1:32:33.231 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986b3c1340 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
    2013/03/05 1:32:34.499 am Dock[590]: no information back from LS about running process
    2013/03/05 1:34:58.597 am Safari[8023]: PlotISImageRef 0x20990018 InContext 0x7ffb9b9d6ea0 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
    2013/03/05 1:35:00.853 am Dock[590]: no information back from LS about running process
    2013/03/05 1:35:39.917 am TextEdit[8026]: PlotISImageRef 0x25910017 InContext 0x7f8873a45940 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
    2013/03/05 1:35:41.186 am Dock[590]: no information back from LS about running process
    2013/03/05 1:42:14.318 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986c064400 in {33.000000,514.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
    2013/03/05 1:42:15.986 am Dock[590]: no information back from LS about running process
    ===
    Any significance to this?  Thanks for any help.
    - Gord

  • Speed up / Slow down video in Motion?

    Hi I have motion 2.1 and am wondering if there is a way to speed up or slow down a video in motion. I have a video where I want the people to move to the beat of the music playing in my project.
    Thx in advance.

    Thanks It was actually really easy to find the speed I wanted. (People are already dancing in the clip just slow). I just opened the file and went to the modify menu and went down to speed and found the speed I wanted.
    But, having never used FCP much I am stuck trying to save the clip so I can use it in motion.
    When I go to the file menu it has everything greyed out except "export" which only allows "quicktime conversion" option.
    I tried using that and it only exported the audio. The video was blue screen.
    I guess i'm asking...
    How do you save or export a movie after speeding it up in FCP?
    Thx for any assistance.

  • Audigy 2 NX - audio/video skipp

    Here is my system spec:
    Mobo: ASUS A8NE-FM
    Processor: AMD Athlon 64 X2 Dual Core 4200+
    Graphics: ATI Radeon X800
    Memory: 024mb
    HDD: 300Gb
    Sound: Audigy 2 NX (note: onboard sound has been disabled in the BIOS)
    OS: Windows XP Home SP2
    I ran the Audigy 2 NX on my laptop for about a year without problems. The card is now on my new PC (specs above). For a while I was running the card using only generic drivers, but because of this had no real control over my speaker levels, could only use 2 speakers, etc.
    I have installed the Creative drivers now and find that whenever I play a song, watch a video, etc, basically anything that uses sound, things are sped up or skip (the videos will skip to keep in time with the sound).
    I find that if I go to the Device Control whilst audio/video is playing, and change either the sampling rate or the bit depth and apply the change, everything works as it should.
    However, once the application using sound ends, the problems start again, as soon as another program tries to use sound.
    Again, changing the device control settings will fix it each time. It doesn't make a difference what combination of the settings I use.
    This has also had adverse effects in games, such as GTA:SA where the whole game tries to keep up with the increase in sound, meaning vehicles, characters, basically anything that is animated moves exceptionally fast.
    I have tried all the different levels of hardware acceleration and found no improvement, I am running the latest drivers and firmware and frankly i'm out of ideas.
    I had thought it would be a USB issue that would be fixed by applying the latest update, i.e. with the USB 2.0 fix for SP2, but no such luck.
    Hope someone can suggest something cause I don't have the cash to buy an internal device, however much i'd like to (sucks being a student).
    Thanks
    FozZ
    p.s. I have already tried formatting, please don't suggest thatMessage Edited by Monophobe on -02-2005 04:3 PM

    Monophobe wrote:
    Seems that Quake 4 no longer works since putting the drivers on, I get a "Quake 4 has encountered an error and has to close". The compatability issues with these drivers are shocking, please sort them out Creative.
    FozZ
    Have you tried updating your OpenAL drivers? Worked for me...
    http://openal.org/downloads.html

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • How to create audio, video, and photo in a list view format

    I'm creating a webstire entirely out of Flash using CS5 for a paranormal investigation group. In the past, using a Website Tonight template from GoDaddy had placed either an audio, video, or photograph with text above each item discusssing the content. Now, they would like this type of feature in the Flash website. I'm new to Flash, but seasoned in many other Adobe products ... not that this helps ... much!
    Anyways, the website is looking great aside from this one set back, so I'm hoping someone out there can give me a helping hand. I'm willing to purchase a third-party template, but to incorporate that into our Flash file, seems daunting.
    AUDIO
    We need to load an audio that can play, pause, rewind, loop, and stop at the very least.
    Then have text describing the situation around the audio.
    repeat ... and so forth ...
    New audio will be added to this section every week or so, and all the components need to scroll as the screen fills up. When adding new audio, we would add the new audio and text to the top of the list, pushing the remaining audio files down.
    VIDEO
    We need to load video footage with all the button features needed to play, stop, etc. I have found adding video quite easy, but to get the player to move with the text as the frame it is contained in scrolls down is another story. How do you do that?
    Text describing the video contents will be above or next to the video player.
    repeat ... and so forth ...
    New video will be added to this section every week or so, and all the  components need to scroll as the screen fills up. When adding new video,  we would add the new video and text to the top of the list, pushing the  remaining video files down.
    PHOTOS
    ditto as others
    Thanks!!

    As mentioned, building a custom application can be tricky, especially if you are not very familiar with Flash.
    So you want a Web page with an audio player and selection list at the top (or where ever) and then a video player section, along with its playlist, and then at the bottom of the page you want a photo display area... Is that correct? and the scrolling you mentioned is because the page needs to be long enough to hold all 3 components? is that right?
    Have you instead considered just using 3 different frames, one frame for each component and simple buttons to jump from audio to video to photos?
    Or, skip the scrolling in Flash and let the html/css take care of the scrolling, just like any normal Web page. Just make the .swf as long as needed to display all your content.
    Since you are new at this type of a project, I'd suggest you start small, take the project in steps... just build the audio player... then the video player... then your photo slide show..
    Only after you have 3 working moduals would you but them together into one .fla
    And yes, learn to use xml for ALL the data, audio, video, and photos.... very easy to update without having to re-publish any of the Flash.
    Here is a good source for tutorials:
    http://www.gotoandlearn.com/index.php?currentpage=11
    Flash and xml
    http://www.gotoandlearn.com/index.php?currentpage=13
    learn to use NetStream to play your videos, much more versatile and powerful than using the FLVPlayback component
    But learning how to incorporate xml into your Flash project is very important in a project like this. And then broken down into 3 components, it's really not that tough to build a project like this.
    Best wishes,
    Adninjastrator

  • Audio/Video sync drift in Premiere CS5.5, but not in CS6

    I have a QuickTime file with the following specs:
    Video: H.264, 854x480, 29.99fps
    Audio: AAC, 44100 Hz
    When I open the file in QT player, or in Adobe Premiere CS6, there is no issue with Audio/Video sync.
    However, when I import the file in Premiere CS 5.5, there is a drift in the Audio/Video sync.
    Is there something I can do in Premiere CS 5.5 to avoid or fix the drift?
    Thanks.

    I had a similar problem and these are the steps I took to fix it.
    First I deleted the files in "Adobe Premiere Pro Preview Files" for the project in question. I reopened Premiere and it appeared that deleting those files didn't seem to do anything as everything in the project looked the same.
    I then disconnected the drive with the footage on it and opened Premiere. When it asked where the footage was, I told it to Offline All. I then went into Preferences > Media and hit Clean for the Media Cache Database. This had to be done because it only cleans the cache for files that are no longer connected with the project (as noted above). I closed and reopened the project, selected everything in the Project window, right clicked and chose Relink Media. I located one file and it relinked the rest automatically.
    Now, finally, Premiere is re-conforming all the audio. Hooray!

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • Audio/Video Switch Question

    Heres the scenerio:
    I have A JVC Wide Screen Projector that has (On the Back) component plugs and regular video plugs (Red, White, and yellow). I want to plug in the Apple tv to the TV, but that means I would be plugging the audio cables into another input. When I everything to the tv, I can see the apple tv, but I cannot hear anything because the audio plugs are plugged into another input.
    On the tv side, If I plug in the component cables from one input and plug in audio-video from another input into the output on the switch.
    Then plug the Apple tv into one of the inputs on the switch, will it work?
    If the output on the switch is being plugged into two different inputs on the tv, will the apple tv be able to play sound and be seen when its plugged into the switch?

    The back of my TV has a component input (green red blue). It also has another input for Video (red, white, yellow).
    I can get video on the Apple TV from the component, but when I connect the audio to the red, white, I get no sound.
    I was thinking that I am connecting to two different inputs, so thats why I would need a audio/video switch.
    http://img95.imageshack.us/my.php?image=13pf.jpg

  • Firewire speeds and audio/video with Apple TV

    Hello,
    I hope someone can give me some advice regarding 400 vs 800 Firewire connections.
    After picking up an Apple TV about 8 months back, I have decided to consolidate all the audio/video content on my wife's and my Macbooks.
    Looking at grabbing a Mac mini and connecting a large hard disk via Firewire to that to store everything. I don't plan on connecting the Mac mini to the TV...will continue to use the Apple TV unit for that. However, while some some of the content will sync between the Apple TV unit and external hard disk connected to the Mac mini, I figure there will still be a good portion that would be shared/streamed off the external disk as it is viewed or listened to.
    I currently have an Airport Extreme network, and I am able to share/stream video and audio from my Macbook to the Apple TV and it works great. My question is, when I add the Mac mini and start streaming/sharing off the external hard disk attached to it, will there be a difference in performance if the drive is connected via 400 Firewire vs an 800 Firewire?
    I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.
    If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash. The machine doesn't need to do anything more than stay powered on with the iTunes app running and sending files back and forth to the Apple TV.
    Thanks in advance!

    +I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
    +If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
    No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
    A used Mini will usually lack the Apple warranty.
    Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
    If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software.

  • How to send files like audio,video,images and text via RMI..

    Hi everyone,
    As I am working under a project, my own, of creating a chat machine, I've thought to make it capable of doing everything that MSN or yahoo MSN can do. Till now I've just been able to send messages and some small icons as expressions. So, my next step will be making my progam able to send even other files like audio, video, images and text to the person on the other machine to whom I'm chatting. But as I don't have any idea on how to start doing it, I want anyone who think he/she can help me to give me the basic logic that is used to do so. I would very much appreciate it. I've used vectors to store the text messages which is visible to all the users using the chat program enabling them to see various messages in it.
    thank you...
    Jay

    Hi,
    Now, I got stuck because the code doesn't seem to work well. For large files with around 40 mb or more size couldn't be sent. I have constructed the code, just rough sketch, as follows:
    ** In the Server Implementation class I've used FileInputStream to read the contents of a file that is sent as an argument to the method.
    ** Similarly, in the client side I've used RandomAccessFile to save the received array of bytes.
    public void sendFile(File f)
       ChatServer cs=(ChatServer)Naming.lookup("rmi://localhost/ChatServer");
       cs.readsAndStoreTheFileInTheServer(f); // In the Server Implementation the contents of the file is read and saved in an array of byte. later method is invoked by the client to get the array of the saved byte.
       cs.message("-Accept-"); // When a client receives this word then a JComponent with accept and cancel button will be constructed from where other clients can save/cancel the sent file.
    }For small size files this code works well but for files more than 40 mb of size it is useless. I wonder if there's any other alternative.
    regards,
    Jay

Maybe you are looking for