X200 Fan Issues with Windows 7

Hi all,
I've just done a fresh install of Windows 7 Ultimate 64-bit onto my X200, and everything works great except for 1 thing - the fan constantly runs and doesn't stop at all as long as the laptop is on.
I've seen a few other posts of other X200 owners facing the same issue, but with little resolution. I've unintalled Access Connection and turned off my Wireless LAN but to no avail - the fan just keeps on going.
I've switched back my old HDD with XP Pro, and the X200 is quiet with little fan movement - so it definitely seems to me to be Windows 7 and the X200.
Anyone here faced the same problem and managed to resolve this? It's definitely very irritating if you're mobile and constantly need to work with your laptop on your laps!
Solved!
Go to Solution.

jianghaoism wrote:
...it was the vibration from the WD Scorpio Black 7200 HDD that I'm using that's causing the sound / vibration I'm experiencing.
Now I've gotta figure out if the HDD is typically like that or if I got a dud.
There have been quite a few comments about vibration issues with 500GB WD Scorpio Black drivers in numerous web forums. What size is your WD Scorpio drive?
I have a 320GB Hitachi 7200rpm drive in my X200 and it has no vibration problems.
Cheers,
Bill
I don't work for Lenovo

Similar Messages

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Itunes issues with Windows having to do with Apple's patent

I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Itunes issues with windows 8... laggy?

anyone one else having abit a of laggy issue with playing music on windows 8?
i just upgraded to windows 8 con. preview, and its great and fast.
i use to have windows 7 and itunes never skipped a beat.
i have a sony viao with an upgraded ram and ssd hdd.
and its pretty fast.
so i dont think its my computer and windows 8 seems to be fine.
anyone else having this issue? but it only happens now and then.......
NOTE:
i have my music all copied to my sdd hdd aswell
and thats all thats really on there as i have ext. hdd's.
i have a average size library in itunes with around about 50gb of music.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

I have called HP-Support and the answer was:
«Thank you for contacting HP Active Chat Support.
This is in continuation to our response with regards to your chat ID: 63381567
As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
Start the computer.
Press the F10 key to enter the BIOS setup.
Select Restore Defaults .
Under Load Defaults , select Yes .
Choose Save Changes and Exit .
Under Save Changes and Exit , choose Yes .
If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
Open Control Panel .
Expand View by: and select Large Icons .
Click Administrative Tools .
Double-click Services .
Double-click Telephony .
Under the General tab, expand Startup Type , then select Automatic .
Click Apply , click Start , then click OK .
Restart the system.
If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
The issue was not resolved.
So I'm waiting for the release of the new driver...

Is there a known issue with windows 8 supporting itunes?

each time I update itunes I lose my itunes store connection and therefore can't update apps etc. Is this a known issue with windows 8 users?

Yes. Some are complaining.
Search iTunes.exe. RIght Click, Properties, Compatibility, Click Run this program as Adminitrator. OK.
See if this helps

Where is the forum for Windows Update issues with Windows 10 TP 9926

Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

Might try them over here.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

When will there be an itunes update that resolves the compatibility issues with windows 8

When will there be an itunes update that resolves the compatibility issues with windows 8

I hadn't heard there are issues. Can you tell me what the issues you have run into are? I just downloaded it yesterday on my new laptop and I am having issues syncing today...

SSLVPN connectivity issue with Windows 7 x64 All browsers.

I think that I have tried everything to get this working but whatever I seem to do I cannot connect to my SSLVPN using Windows 7 x64. The 32bit version is fine. I have installed the Microsoft C++ Redistributable 2010 and 2005 for both x86 and x64. I have tried clearing the cache in the Browser. I have installed Chrome and Firefox , I even started my laptop using the 'Disable Driver Signature Enforcement' from Advanced Boot options but nothing is working.
Does anyone have anything else to try. This is a bit of a showstopper for us because not do we have this issue with Windows but we have Mac users as well and that is also an issue.
Cisco really needs to fix this issue fast...
Please help.
Thanks
Mark Sheehan

Try using both the 32-bit and 64-bit versions of Internet Explorer. Sometimes one of the two will work.

Issues with Windows 8.1

Hi!
I am and have always been a big fan of pc over mac because of the flexibility and possibility to modify your pc.
My last five computers have all been compaq or hp and i have been very happy with them all.
I recently bought two new hp computer one hp 15-p077no and one hp 15-r069no both with windows 8.1 one for me and one for my mother, who needed a os upgrade since her old compaq with windows xp was canceled.
My previous HP G62-a35so had windows 7 and worked wonderfully until my niece spiled soda on it.
But the new os windows 8.1 is driving her mad (and i agree)! It is useless without a touchscreen. I tried with microsoft support but they refered me to the manufacturer.
I (my mother) has two major issues:
One:
She cant handle the new interface without a start button (i have a start button on my 15-p077no) but it is not in hers (15-r069no).
She needs the traditional start button. Is there a setting to show the button? Why is it showing on mine and not on hers?
Two:
She keeps on by accident changing windows by pointing at the miniatures in the desktop taskbar. Is there any posibility of hiding or removing the minatures or disabeling the auto point-show function?
Thanks Dave

Hello @DavePro,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking to disable / limit the new tile screen in favor of the start menu. When you are referring to "miniatures", are you talking about the apps on the tile screen? Has your mother's laptop installed the most recent important Windows updates?
In regards to minimizing the "Metro" UI on your Windows 8.1 computer, I recommend taking a look at this document on How to keep the Windows 8.1 Modern UI out of your way. This should help to utilize the desktop more than the tile menu on your mother's computer.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Ipod sync issues with Windows 7

I just purchased a new computer with the Windows 7 operating softeware and now I cannot sync my Ipod Touch (3rd generation) but I do not experience this issue with my old computer with Windows Vista. When I need to update my Ipod I have to connect it to my old computer. Help. I do not want to pay Apple for support when I see countless post about this issue.

Diane Wordsmith wrote:
Are you set to manually manage on both computers? If not, an auto sync on one of them will erase the iPod and place that computer's library on it.
No that wouldn't be it. The manual vs. Auto sync setting is stored on the iPod, not on iTunes. So if you take a manually managed iPod and plug it into an iTunes it has never connected to before, the new iTunes will still recognize the iPod as manually managed and not do anything bad to it (in theory).
Patrick

Driver issue with Windows 8.1 on new iMac 2013

Just got a brand new iMac and am attempting to install Windows 8.1 on it. The Boot Camp Assistant kept timing out on the support software download so I downloaded Boot Camp 5.0.5033 from Apple support and put that on my external FAT drive.
I was able to get Windows installed, but when I attempted to run setup.exe off of my external drive, I got a "Boot Camp x64 is unsupported on this computer model" error. I was able to work around this by running bootcamp.msi from a DOS prompt in administrator mode at which point the install seemed to go through successfully.
Despite that, I'm still getting no love on WiFI, bluetooth, audio, etc. I'm attempting to download again through Boot Camp Assistant on the hope that there's a later version for my machine that's not yet available for direct download but am not optimistic.
Any thoughts/ideas would be great appreciated. Note that I am running the latest everything on the Mac side (recent 10.8.5 Combo).
Thanks in advance.

Actually, that link is exactly what got me in trouble. Use Boot Camp Assistant to get the drivers.
As of this writing, Boot Camp 5.0.5033 will not adequately set up your drivers on a new iMac with Windows 8.1.
The only way I was able to get the WiFi working was to use the drivers automatically downloaded by Boot Camp Assistant. Presmably this is a newer version than 5.0.5033 but I haven't been able to find it anywhere else for download.
I should also note that I was having some DirectX issues running graphics intensive software even after updating through Boot Camp Assistant. These were resolved by downloading the latest driver for my video card (GeForce 780M). There might be other issues that will require a manual driver update but I've yet to run into any more.
Best of luck.

X200 Fan Issues with Windows 7

Similar Messages

Maybe you are looking for