X200 in Hibernate Mode, it starts up automatically without pressing on the power up button....

X200
Dear all,
When my X200 is in Hibernate Mode, it starts up automatically without pressing on the power up button....
I installed Win Xp on it. All my drivers are installed.
I swichted of the Power on Lan in the Bios, but still no difference.
When I turn off my computer completely, I doesn't start up from himself. So it's only in hibernate mode.
Does anyone has an idea what it coud be?
Thanks a lot for your support.

Take it right back and Apple will likely exchange it for another rather than have you demand your money back.
This time, check to see if you have a lemon first before leaving.
It's rare, but it does happen, sorry it happened to you.

Similar Messages

My ipad mini 2 is not turning on. I tried to reset with the power/home buttons but it didnt work. I tried to restore it in DFU mode but it didnt work, i get error 4004. Please help me!

My ipad mini 2 is not turning on. I tried to reset with the power/home buttons but it didnt work. I tried to restore it in DFU mode but it didnt work, i get error 4004. Please help me!

I also tried the ol' whacking 3 times trick...Didn't work to my surprise

Ms Excel move automatically without pressing Enter or Tab to the next cell

Hi, I wonder if it is possible to make Ms Excel move automatically without pressing Enter or Tab to the next cell once a certain number of digits is entered, for example, I'm using a barcode scanner to scan a barcode of 13 digits, so I want Excel
to move to the next cell once the barcode is scanned.
example: I'm In cell A1, this code appeared after scanning "AABB1234567CC", I want Excel to move to A2 in order to scan the next barcode.

Hi,
Excel has no direct feature or option to achieve your goal. We'd better try the macro via VBA code to test. Please see the thread:
http://excel.tips.net/T003923_Automatically_Moving_from_Cell_to_Cell_when_Entering_Data.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If you have further question about code, I recommend you follow with thread which you posted in MSDN forum:
http://social.technet.microsoft.com/Forums/en-US/6f5344cf-c1b5-485d-982a-eeec45294f9b/ms-excel-move-automatically-without-pressing-enter-or-tab?forum=exceldev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My macbook doesn't work. After pressing down the power button I hear the sound from starting the apple symbol appears and after a while a sign prohibited appears on the place of the apple symbol

My macbook doesn't work. After pressing down the power button I hear the sound from starting the apple symbol appears and after a while a sign prohibited appears on the place of the apple symbol

Hi Kappy Thanks for your answer. I did a reboot on my Macbook as suggested and this operation is going on non stop for 14 hours and on the screen always appears the same message that you can see in the picture in attachment. Any ideas?

My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do

My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do I do?

You have a HDD problem (hopefully you have a backup). Start with the information on this support article:
https://support.apple.com/kb/TS1440
Ciao.

My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something

My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something and then after the bar is full, it shuts off. Please help

Hpullen wrote:
A1278 and I'm not sure about the OSX
http://support.apple.com/kb/HT4132 How to identify MacBook Pro models
http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers

My Mac Pro starts up when I turn on the power, BEFORE I switch it on with the button, why? Plus, my computer keeps freezing and blacking out.

My Mac Pro starts up when I turn on the power supply (when I plug it to the outlet), BEFORE I switch on the button on the computer, why is this happening? Plus, my computer keeps freezing and blacking out and I'm forced to restart it, that's when the compter starts on its own when I turn on the power.

Hello Engender,
I should have followed up with a progress report because I eventually eliminated all the problems I was having with my Mac Pro, now it's behaving like a new computer… beautifully. I did originally take Grant's advice above, changing the setting that I had in the System Preferences > Energy Saver but that only stopped from rebooting on its own when I shut down my Mac properly. Otherwise it continued to restart on its own after freezing or crushing when I switched on the power. I took my machine to the Apple Store and after many tests they couldn't find anything wrong with it. I was very depressed about the whole business.
It was after going onto many of the other Apple related websites that I discovered that it wasn't a faulty power switch or fan, as as I originally thought, but found out that my problem was related to the Graphic Card and possibly I did not have enough ram (I had the original amount of 2 GB). The original card that came with the computer: 512 MB ATI Radeon X1900 XT was over heating and forcing my machine to shut down, I think it was because I had upgraded to OSX Lion which on its own requires at least 2 GB of ram to operate well. I added 4 GB of Ram to the 2GB I had (4GB kit (2GBx2), Apple 240-pin FBDIMM, DDR2 PC2-5300 upgrades for Apple Mac Pro (4-core) 1st Gen. - 2006-2007 Desktop/PC, CT579443 from Crucial.com about $160 for the set) and replaced the Graphic Card with ATI Radeon HD 5770 1024 MB from Apple (around $260), (ATI Radeon HD 5770 Graphics Upgrade Kit for Mac Pro (Mid 2010) - Apple Store (U.S.)) This card works very well with my original Mac Pro 2008. I installed it about two weeks ago and no problem with it starting on its own, over heating or freezing. OSX Lion works well and I'm thinking of upgrading to Mountain Lion once I learn that my Mac Pro 1.1 will work with the new hardware I installed.
Your problem could just be the power cord but I agree with you that doesn't sound right, when I mentioned faulty switch I meant the part where the power cord meets the power button, the unit which houses the power distribution, I thought at first that it could be faulty but changed my mind because of the computer overheating.
I don't know if this is of any help to you but I hope your trouble will be solved with the new cord.

How to open a Website in app automatically (without pressing button)

I want to load a Website automatically into a page in my app without pressing a button (autoload). How can I do this?

Web Content overlay lets you display a web page within a view area. Users can see the web page content in the view area without having to display a separate in-app browser. You can specify a web URL or a local HTML file.
If you specify a local HTML file, make sure that the .html file and associated files and folders appear in the same folder. When the article content is created, all the files in the same folder as the .html file are uploaded.
For any URL that gets redirected to a mobile URL automatically, specify the mobile URL (such as http://mobile.twitter.com/), not the original URL (such as http://twitter.com).
Laxman

HT4199 My iphone has always connected automatically without problem to the wifi network at work, i.e.BTBusinessHub, and at home, i.e.Bthomehub. Now it tries to connect at work but doesnt manage it although it still works at home. Can anyone advise why?

My iphone has always connected automatically and without problem to the wifi at work i.e. BTBusinesshub and at home BTHomehub but yesterday it would not connect at work. It is ok at home but again today at work it is not connecting. It appears to try but is not connecting, please help.

You can try doing a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up - then check wifi - if that doesn't work then
do a network reset note: you will have to reenter wifi password again when your in range.
settings - general - reset - reset network settings. If that doesn't work then I would talk to your IT dept.

HT1379 My iMac won't start up. I turn on the power button the start up screen appears. The apple symbol shows up, the loading shows up, the loading circle starts. Then the loading bar disappears, and The loading circle and apple logo disappear and power i

The power comes on. Screen turns white. The start up sound plays, the apple symbol come up the loading bar show up but do not show any sign of loading. The loading circle appears and spins. Then the loading bar disappears and the. The screen goes black and power goes off. I've tried unplugging, command alt escape, and command alt p r, no effect. Any other suggestions???

OS X v10.6- Gray progress bar appears under Apple logo during startup
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Reading the mode channel start and no. of bits using the CAN channel API

Currently I am using the CAN channel API to get information from a CANdb file. I'm using it to get max, min, scaling information, etc. However, I can not use it to get the start bit and the number of bits in the channel mode when using mode-dependant channels. Is there an easier method to retrieve this information using one of the CAN API's instead of manually parsing the file myself for the information?

I think that there has been some misunderstanding with regard to the
original question. I believe Dillon is trying to find the start bit and
number of bits in the multiplexer. The terminology of multiplexer and
mode gets a little confusing. For clarification, my understanding is
that a mode is a specific value of a multiplexer. In the case of Dirk's
example code, he was able to retrieve the number
of bits of the CHANNEL, but not the number of bits of the MULTIPLEXER.
I believe that I have run into a similar problem to
Dillon's. I want to read a NI CAN Database (*.ncd) or a Vector CAN
Database (*.dbc) programmitically. I have attached a zip containing a
VI and some *.ncd file to allow others to see my progress thus far.
This is a heavily modified version of Dirk's previously posted program.
As you can see, it is easy to get a list of messages using the "CAN Get
Names" VI. Using that list of messages, it is also easy to get a list
of channels by reusing the "CAN Get Names" VI. The list of channels
does not include any information as to whether or not they belong to a
multiplexer, but fortunately we can use the "CAN Get Property" VI to
find out which channels are mode dependent and the value of the mode
that the channel corresponds to (if it is mode dependent).
Unfortunately, this does not give us any information as to the location
or length of the multiplexer which contains the mode. Thus, I know
whether I should be looking for a multiplexer and I know what value to
watch for in the multiplexer, but I have no idea where or how to look
for that value in the CAN message.
Interestingly, by
playing around with Dirk's database that he had attached, I was able to
determine that the list of channels does not always give out the same
information. Typically, you will simply receive an 1D array strings
containing only the channel names, but the output is different in the
event that you have a database that meets the following criteria:
    1. Two channels (in different modes) have the same name
    2. The database contains at least two multiplexers
In
this case the output will be a 1D array of strings in which the
repeated channels (regardless of whether they are in the same
multiplexer) will be output in the format "<message
name>.<multiplexer NAME>.<mode value>.<channel
name>". The channels that have unique names are simply output as the
channel name. Now this is helpful in that by default the multiplexer
name contains the start bit of the multiplexer, but this cannot be
relied upon. The creator of the database could easily change the name
of the multiplexer and the format is only adhered to when the
previously mentioned criteria are met. Also it still does not tell us
anything about the number of bits expected in the multiplexer (remember
Dirk had found the number of bits expected for the CHANNEL).
I have found another alternative output format when the following criteria are met:
1. Two channels (in different modes) have the same name
    2. Only one multiplexer is contained within the file
In
this case the output will be a 1D array of strings in which the
repeated channels will be output in the format "<message
name>.<mode value>.<channel
name>". Again, this special format is only used for the repeated
channels. Uniquely named channels are simply output as channel names. While this is not particularly useful, but I thought I should mention it.
It
is also probably worth noting that I found the previously mentioned
alternative formats by directly reading reading a *.ncd file. It
appears that by reading the channels directly from MAX we get at least
one additional format (<message name.channel name> ). Considering
that this is actually even less information and since my application
specifically requires that I directly read a CAN database without the
assistance of MAX, I have not significantly explored this avenue.
Let
me finish by reiterating the question that I am asking: How do you
programmitically determine the start bit and number of bits of the
multiplexers in a CAN database (*.ncd or *.dbc). I have attached a zip
file containg my current "testing" VI and some databases to illustrate
the results that I have described above.
Message Edited by William Griffin on 01-06-2009 04:58 PM
William Griffin
NI Certified LabVIEW Architect
NI Certified Professional Instructor
DISTek Integration, Inc. - NI Certified Alliance Partner
http://ww2.distek.com
Attachments:
test_mode_dep_msg_rev_B.zip ‏18 KB

Imovie is stuck - I was importing video, then imovie "shut down unexpectedly", now each time I re-start it automatically tried to process the Event, and "unexpectedly" shuts down again, etc, etc. Any thoughts?

The imovie window that keeps comig up after I restart the program is "Generating Thumbnails". I would like to just stop the action, but am not sure where to go, or do I go thru the imac, or the imovie program. It just keeps shutting itself down, and when i reboot the program it keeps going through the same cycle. I've tried restarting the computer, and force quitting the program. Any advice would be greatly appreciated!

You might be able to trick iMovie by temporarily moving that project folder out of the following location:
Mac HD > Users > (your home folder) > Movies > iMovie Projects > (look for the name of the project that blew-up)
Drag that project folder to the Desktop for the time being. Launch iMovie and see if it still tries to create the Project Thumbnails. If it gets past any error messages or other house keeping, you can create a new project. Otherwise, quit iMovie. Drag that project folder from the desktop BACK into your iMovie Projects folder. Try launching iMovie again and see if it gets stuck generating the Thumbnails.

IDVD - dvd plays automatically without going to the menu screen

Hi,
I'm new to iDVD and burned my first project yesterday, after transfering it from iMovie.
A problem: I created chapter markers in iDVD, which when imported into iDVD appeared there. The home page let's you choose either to play the movie or select a scene. However, after burning the project to DVD and inserting it into a DVD player, it starts the movie automatically!
I would like it to go, by default, to the menu screen when inserting into a DVD player - so I can choose scenes. Any suggestions how I can get it to do that?
Thank you,
Mont

As you have rightfully pointed out above; I wouldn't assume iDvd'08 and iDvd'09 are identical versions. But they are very similar. There are more significant differences within separate iMovie versions, as well as iPhoto, GB, etc.
Have I tested the difference between iDvd'08 vs. iDvd'09? No, not yet. As soon as I do I'll make every attempt to post a few of the differences. At the moment, I'm looking into separate volumes / hard drive bootability differences between Tiger vs. Leopard on both an external FW HD as well as internal ATA and SATA hard drives. And it seems I have my work cut out for me in this regard for at least the next few weeks. As soon as I complete this latter issue I will come back to iDvd.
Under Tiger I didn't have to worry about making a clone (using CCC or SuperDuper) of my existing volume/s that contained iDvd and other i-apps. But apparently (at least at first glance) this is longer the case under Leopard.
Message was edited by: SDMacuser

Firefox 14 - How to have my start page launched when clicking on the 'new tab'-button?

I want to my startpage (Google) launched with clicking on the + Tab at the top. However,I donot want another plug-in added.
Can this be configured one way or the other?
TIA
=

Hi tkpeters,
Please see [https://support.mozilla.org/en-US/kb/removing-babylon-searchqu-or-mystart this]. Mystart & incredibar could also come bundled with another add-on, or another entirely different Windows application and the exact names may not be always obvious in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', or the Windows OS '''Control Panel''' > '''Programs and features'''.
You can also [https://support.mozilla.org/en-US/questions/new/desktop start a new thread] which would help to provide specific details relevant to your configuration/issue.

Satellite A110-293 hangs in the hibernate mode

Toshiba Satellite A110-293 is hanging in the hibernate mode after opening the notebook cover. Nothing happens after tapping the keyboard, mouse clicking or any other activity (i.e. opening DVD-ROM etc.)
The cover was closed as usual with some programs running. After about 10 minutes I`ve tried to open but all system was in hibernate mode and it is still sleeping.
Please help me to restart (fix or smth) the notebook, because I haven`t found any restart button.
Many Thanks in advance.

well, if I were you I would probably try to:
1) (long) press the Power button until its blue light shuts down (just to be sure the system is powered down)
2) press again the Power button to power-up the system;
if (and only if) the system was not starting to boot after (step 2) I would do the following:
3) unplug the power cord from the laptop
a) if all the LEDs are off remove the battery (for a few minutes)
(only) if any LED/(light indicator) is on when trying to perform the step 3a) - proceed as described in step 1) and then try again the above ( step 3a) and then 3b) - below )
b) put the battery back and try again step 1) and step 2)
if even after step 3) the system still refuses to power on I would try:
4) with the power cord (from the adapter) unplugged from the laptop, remove the battery (as stated in 3) and 3a) ); then try to plug in the power cord and power (from the Power button) the laptop - without the battery (battery removed)
a) if the laptop powers up it could be a battery problem; at least the system is functioning! :)
b) if the laptop still doesn't power up then I would take it to warranty
if I were you I would do what I wrote above; I don't advice you to do or not to do what I previously stated; I'm just telling you what I would try in such a case

X200 in Hibernate Mode, it starts up automatically without pressing on the power up button....

Similar Messages

Maybe you are looking for