X200 resolution problem (software won't adjust resolution to 1280x800

I'm using Windows 7, had it installed on the notebook for about 6 months, and now every time I turn it on, the monitor will only display 1024x768. The software won't give me an option to crank it up to 1280x800 and it is even at 1024x768 in the BIOS and the windows boot screen.
has anyone had this problem?

Check these out. Don't know if they'll help, since I only use my built-in iMac display:
New cscreen posted:
http://www.pyehouse.com/cscreen/
Change screen resolution in Terminal:
http://www.macosxhints.com/article.php?story=20090413120929454

Similar Messages

  • Docked resolution problem x220

    Hi All
    Sometimes after redocking resolution on external screen doesn't change to one set in  Intel graphics and media panel. My system Lenovo x220 docking station 3 OS Windows XP SP3. I have more the same systems and they don't have this problem. I updated system via lenovo vantage update software but resolution problem still randomly occurring. I replaced docking station as well. What could be wrong?
    Thanks

    As I understand the graphics disturb after removing docking station, if the issue occurs for few seconds then it can be ignored.
    If the resolution does not come to normal then you should update the BIOS and check.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj15us.exe
    Also confirm the Intel graphic driver version is 6.14.10.5384
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • NI 1772 camera exposure time adjustment resolution

    What is the exposure time adjustment resolution capability for the NI 1772 camera?  I'm getting only 10ms.  Can I get 5 or even 1ms resolution?

    Hi Rob,
    I am unclear what the problem you are seeing is. Vision Builder AI does not appear to impose any restrictions on the granularity of the exposure time. You can put any value with precision down to sub-microsecond levels (no need to go by units of 10 microseconds).
    As for the changes in intensity vs exposure time, keep in mind that image sensors and the hardware that reads them don't necessarilly behave linearly and so you may not see such a linear relationship in the data. While you said that you saw no change in intensity from 70us to 80us, were you looking at a single pixel or an average of the entire sensor? If you average it over the whole sensor I think you'll see the difference (although it might be small and less than a single count).
    Eric

  • My mac mini late 2012 is having resolution problems?

    My mac mini late 2012 is having resolution problems?
    Tried resetting PRAM and SMC but still nothing works.
    Sometimes is goes back to normal. But then suddenly when I startup or wake up from sleep it changes to resolution 800x600 and stays there..
    I'm using my Thunderbolt port with my minidisplay port to vga, because i don't have a HD monitor.
    Does anyone have a solution?

    Hmmm, not sure on the startup, but on the sleep angle...
    Well first...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Then maybe...
    See if it's related to this...
    The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"

  • Is it poss to adjust resolution on my MacbookPro in-built Cam ?

    Hi again,
    Is it poss to adjust/improve the resolution on my MacbookPro in-built Cam ?
    Thanks.
    Chris

    christopher-h wrote:
    Hi again,
    Hello again, Chris!
    Is it poss to adjust....
    Camera resolution is a function of hardware and cannot be changed.
    Camera resolution notwithstanding, the software that you use to operate your iSight controls the resolution for that application, so you may see different image resolutions depending on which apps you use with your iSight. For instance, regardless of whether you use iSight or some other webcam, iChat automatically limits video resolution to a maximum of 640x480. iChat camera resolutions will also automatically be set smaller in low light or with slower internet connections, and, of course, if the hardware resolution of the camera other readers might use is less than 640x480. Some other chat apps set maximum resolution even lower than 640x480.
    QuickTime Pro is one Apple app that lets you select camera resolution in its Preferences, but most apps automatically set the image resolution without any control on your part.
    ... improve the resolution on my MacbookPro in-built Cam ? ...
    While not changing camera resolution, adding light can increase image resolution in some apps.
    This thread might help improve your iSight's image:
      http://discussions.apple.com/message.jspa?messageID=10709632
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Resolution problem

    How can I improve the resolution of files?  When clients upload files, they get a resolution warning for prints larger than 5x7.  Never had this problem with Photoshop Elements.  I have increased the file size to largest/100 on export.

    You cannot improve the resolution but you can increase the pixel dimension.
    Resolution comes into play when we print an image to a certain size. Since we need at least 240 ppi (and better 300 pi) for a quality print, you can calculate the needed pixel dimension by multiplying print size in inches (long side or short side - but only one of them) with the necessary print resolution (300).
    For example: For a print of 15" x 10" you would need a pixel dimension of 4500 x 3000 pixels (Print resolution 300);
    At 240 ppi print resolution the same print size would result in a pixel dimension of 3600 x 2400 pixels.
    You can set the pixel dimension in the Export Dialog / Image Sizing. Select one of the edges (Short Edge or Long Edge) and specify the size in inches and the resolution (best 300 ppi). You need to specify only one side; the other side will automatically fall according to the side ratio. So if - in the above example - you specify 15" and a resolution of 300 ppi for the the Long Edge, the Short Edge will automatically be 2400 pixels if the ratio of the sides is 1.5 : 1.
    I said initially that you cannot improve / increase the resolution. This is so because as long as an image is a digital image only, i.e. on the computer, or on the web, etc. it has only pixel dimension. Resolution comes into play only when we have also a size in inches (or cm), i.e. a physical dimension. Digital images don't have a physical dimension, only printed images have one.
    Thus you need to increase the pixel dimension of your images so much that your clients can print it with the required resolution for a specific print size.
    The question you have to ask yourself (and maybe your clients) is: What is the maximal print size that my clients should be able to make. This maximal print size (multiplied by the print resolution) will determine the pixel dimension you need to choose when exporting the image.

  • XSD Resolution problem - Unable to load Translation schemas

    Hi,
    I've run into a very strange kind of problem (not to say some are less strange then others). Let me explain the context of the situation.
    I've got a BPEL process calling two plsql packages on ORA database, one Java web service running on the same weblogic server and couple of other services (eg. notification services, jdbc select/insert, etc.). There is no problem with the last listed, but definitely something wrong with the web service and the plsql callouts.
    When I deploy the BPEL process and execute it, the first two instances always fail. The same happens when I restart the server, the errors are repeated after a certain period as well (for example over night). The process always fails EXACTLY TWICE, before running normally. Every other instance executed after the two initial failures runs WITHOUT the following error.
    I mentioned there are two plsql callouts in the process, earlier the first instance failed on the second one and the second instance failed on the first. Now, it mostly fails on the second callout. I've made no significant changes in the code. Perhaps the strangest thing about this is that it fails when invoking the plsql package but the error concerns xsd definitions of the web service that plays no role at this stage.
    All my services are correctly deployed, I deleted all interface definitions from MDS repository and redeployed SOA bundle again before installing each service.
    I think it has something to do with generated xsd definitions by the java web service (it's the http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 and http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 from following stack trace), but I can't figure out what exactly is wrong with them.
    Anybody come accross a similar error? Thanks for tips, I've run out of ideas.      
    Error Message: {http://schemas.oracle.com/bpel/extension}bindingFault
    Fault ID     default/S50001KontrolaSouboruBS!1.0*soa_be986963-f9d9-412d-b692-43804a35b3ee/KontrolaSouboru/830023-BpInv18-BpSeq8.12-2
    Fault Time     14-Feb-2012 11:11:16
    Non Recoverable System Fault :
    <bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'LogFile' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.db.DBStoredProcedureInteractionSpec due to: XSD Resolution problem. XSD Resolution problem. Unable to load Translation schemas from for http://xmlns.oracle.com/pcbpel/adapter/db/TST_IP/LOG_FILE/LOG_FILE/ due to: Different schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentGlobal element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 82] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:82] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 36] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:36] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 21] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:21] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 51] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:51] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 66] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:66] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 112] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:112] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 127] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:127] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 97] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:97] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 115] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 52] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:117] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:54] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 175] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 98] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:177] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:100] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 153] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 128] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:155] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:130] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 64] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 83] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:66] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:85] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 93] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 22] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:95] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:24] Please make sure all used XML schemas are imported/included correctly. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Different schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentGlobal element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 82] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:82] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 36] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:36] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 21] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:21] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 51] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:51] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 66] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:66] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 112] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:112] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 127] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:127] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 97] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:97] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 115] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 52] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:117] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:54] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 175] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 98] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:177] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:100] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 153] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 128] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:155] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:130] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 64] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 83] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:66] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:85] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 93] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 22] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:95] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:24] </detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault>

    I had similar issue, when i deployed composite using Jdeveloper. The problem was with my adf-config.xml pointing to dev server and all my references in my composite.xml referring to test server.
    I changed property of 'oracle.mds.persistence.stores.db.DBMetadataStore' in adf-config.xml to test server. After adf-config.xml change in Jdev my compilation went smooth.
    Note: If above changes doesn't work, try restarting JDeveloper, sometimes the changes in adf-config.xml is not getting effect immediately.
    Regards,
    Ziaur Rahuman S
    Edited by: Ziaur Rahuman on Feb 13, 2013 10:58 PM

  • EHP1 Upgarde Monitor screen resolution problem in a support message

    Hi Experts,
    We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
    Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
    How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
    can any one suggest how to make the overview tab visible completely with small resolution monitors.
    Thanks
    Nanda

    >
    Nanda Kishore wrote:
    > Hi
    >
    > There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
    >
    > Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
    SAP Note 1351673      Size of containers not changed for support messages       
    Best regards,
    Ruediger

  • Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

  • Clamshell Mode source resolution problem

    I own a Macbook Pro with Mountain Lion, and I have used my laptop in clamshell mode once. After i changed the resolution to see which would work better with my Philips tv, I have never been able to use CS Mode again. I am unsure if it is a computer issue or the tv.
    I'm able to mirror displays and everything works great, but once I close the laptop to use CS Mode the tv says "Change source resolution". I have tried every resolution available in the scaled tab, and none seem to work.
    HELP please!

    I was having the same problem. I figured out that when I closed the lid my macbook was changing the resolution for the external to something that the monitor couldn't handle. I used VNC to remote into my computer and change the display manually - after that all was well. The monitor displays fine in clamshell mode now.

  • Xorg nvidia resolution problems with KDE

    I just installed Arch 2008.04-RC last night.  I configured xorg.conf using nvidia with the screen resolution set to "1440x900" which worked in both the X Windows and KDE 3.5.9. 
    I was trying to get xine working with Amarok.  At one point, I deleted ~/.xine and xinirtc to force itself to reset. I then rebooted at which point I noticed the resolution set only at "640x400" in KDE.  I checked the Display Settings and that was the maximum resolution I could choose.  I then switched to the vesa drivers which allowed a maximum resolution of "1024x768". 
    I removed xorg and nvidia and reinstalled.  I can no longer get a resolution of "1440x900" resolution for my Viewsonic VA1926v flat screen monitor.  I read on the xorg log that
    I am using the Nvidia GeForce 7300 GT video graphics card.  uname -r:  2.6.25-ARCH
    From /var/log/Xorg.0.log I get the following information when I am using vesa:
    (II) VESA(0): Total Memory: 4096 64KB banks (262144kB)
    (II) VESA(0): Generic Monitor: Using hsync range of 30.00-82.00 kHz
    (II) VESA(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
    (II) VESA(0): Not using mode "1440x900" (no mode of this name)
    (II) VESA(0): Not using mode "1280x1024" (no mode of this name)
    (--) VESA(0): Virtual size is 1024x768 (pitch 1024)
    (**) VESA(0): *Built-in mode "1024x768"
    (**) VESA(0): *Built-in mode "800x600"
    (**) VESA(0): Built-in mode "640x480"
    (**) VESA(0): Built-in mode "640x400"
    (**) VESA(0): Built-in mode "320x400"
    (**) VESA(0): Built-in mode "320x240"
    (**) VESA(0): Built-in mode "320x200"
    (==) VESA(0): DPI set to (96, 96)
    With nvidia, it just states that no mode is available for '1440x900' and selects virtual size of '640x400'.
    My xorg.conf below:
    Section "ServerLayout"
    Identifier "Default Layout"
    screen "Default Screen" 0 0
    Inputdevice "Generic Keyboard"
    Inputdevice "Configured Mouse"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Configured Mouse"
    Driver "mouse"
    Option "CorePointer"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "ImPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "true"
    EndSection
    Section "Monitor"
    Identifier "Generic Monitor"
    Horizsync 30.0 - 82.0
    Vertrefresh 50.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "nVidia Corporation G70 [GeForce 7300 GT]"
    Driver "vesa"
    Option "AddARGBVisuals" "True"
    Option "AddARGBGLXVisuals" "True"
    Option "NoLogo" "True"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "nVidia Corporation G70 [GeForce 7300 GT]"
    Monitor "Generic Monitor"
    Defaultdepth 24
    Option "AddARGBVisuals" "True"
    Option "NoLogo" "True"
    Option "AddARGBGLXVisuals" "True"
    Option "UseEdidDpi" "false"
    Option "DPI" "96 x 96"
    Option "ConnectedMonitor" "DFP"
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1440x900" "1280x1024" "1024x768" "800x600"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    I am at a loss at trying to fix this one.  Something similar happened when I was running Gentoo on this same desktop back in April.  I also have the same low resolution problem when using Sabayon.
    Any help here would be much appreciated :-)

    I thought these frequencies were a bit low too.  My manual said there were the frequencies.  I checked online and it said the same.  I need to do more research on it.
    I did manage to get my 1440x900 resolution back using the open source nv drivers.  I had to do the same with Gentoo and Linux Mint in the past.  Everytime I used the nvidia drivers, my monitor returns to the 640x400 resolution and I noticed the only way to avoid it was to use nv.  I do not play games online or use Compiz so it does not bother me.
    Thanks.

  • Screen Resolution Problems With Palm Desktop

    I'm running Palm Desktop 6.2.2 and have this problem of it changing my resolution to 640x480 on my laptop running Win 7 whenever I call it up.  How can I keep it at the recommended 1280x800 when I call up Palm desktop?
    Post relates to: Palm TX

    You right-click the Palm Desktop, select "Properties," click the "Compatibility" tab, and check the settings. (there is a lower-resolution setting there)
    Compatibility mode is a way to restore functionality to older applications written for older versions of Windows, such as this game I once played. It wouldn't work on my Vista PC until i enabled compatibility mode, which restored semi-functionality. (it still crashed a lot)
    webosnation.com is another option for help.

  • Resolution problems with os x yosemite

    i downloaded os x yosemite i can't get a good picture i can only use 1080p to small pluse it only loads a page in center and its to small,its hooked up to my tv lg 46 inch

    Hi greggg1,
    I'm not sure how your Mac is connected to your TV but it sounds like a settings issue.
    There are couple places to look.
    OS X Yosemite: If the picture doesn’t fill the TV screen
    If you connected your Mac to a TV and the images don’t fill the TV screen, try turning on Overscan.
    Choose Apple menu > System Preferences, click Displays, then click Display.
    Click Options, then select Overscan.
    OS X Yosemite: Adjust your display’s resolution
    Depending on how you adjust the resolution, some apps may not fit entirely on the screen. Using a scaled resolution may affect performance.
    Set the resolution for your primary display
    Choose Apple menu > System Preferences, click Displays, then click Display.
    Select Scaled, then select one of the scaled resolution options.
    There may also be settings on the TV you may need to set, like zoom.
    Thank you for visiting Apple Support Communities.
    Nubz

  • Custom book export resolution problem in PDF - only 150DPI!?

    I've been using the custom book option and when it came to exporting my PDF I have run into a problem involving the undocumented output resolution of a PDF at a given size. The custom book dialog allows you to create a book with a certain size in inches, but this really has no real meaning since the resolution of that output cannot also be specified in either the layout option or the print dialog. For example is it 150dpi or 300dpi? From some investigation it appears to be locked at 150DPI.
    Now I would have thought that Aperture was intelligent enough to just treat the album layout (this is my assumption) as some kind of smart object, where the layout is resolution independent and the final output resolution can be determined when printing to a printer or PDF. In that case the dialog for the setup of the custom size is correct. However, there is no option that I can see in the print dialog to actually specify the output resolution; Aperture is left to its own devices to specify an output resolution, which is undocumented.
    I use a printer that accepts JPG or TIF files and I need 300dpi for an album size of 10x13 inches. This equates to 3900x3000 pixels per page. I am able to export to PDF in the print dialog and then used an automator action to export each page of the PDF as JPG and reimported back into Aperture 2 in the same action. In the PDF>JPG conversion option there is the ability to set the DPI to 300. That works fine and the resulting JPG images show as 300dpi (3900x3000px). When looking at the images though they look a little soft, which leads me to believe that my action was simply interpolating a 150dpi image in the PDF into 300dpi.
    So to test this, I noticed that if I exported just one page of the album as a PDF and opened the PDF in Preview it does indeed tell you that it is 13x10 inches (no mention of the pixel resolution though). So, you can actually reimport a single page PDF into Aperture and if you do this it appears that the actual resolution is 1950x1500 and that equates to 150dpi for a 13x10 inch layout.
    So there are two things that could possibly be going on here:
    1. The actual layout of the album is locked at 150DPI and the save to PDF simply takes that and exports a PDF at that resolution.
    2. The layout of the album is resolution independent, the size of the album (in the custom dialog) simply controls the aspect of the page layout, and the print dialog (save to PDF) is exporting as 150DPI as default. When I run my automator action (these are the Leopard PDF actions), the save each page to JPG action is up-res'ing the image to 300dpi.
    This is where I need help. Is 1 or 2 (or something else?) happening. Also, does the PDF save as JPG12? That too is undocumented.
    If number 1 is happening I may have to set my album size to 26x20inches to get a 10x13 inch page at 300dpi.
    If number 2 is happening I need to find a PDF/TIFF/JPEG print driver to enable me to export at 300dpi as the print dialog in not standard (and we don't get the nice 'save as' drop down where we could do other things. So far my search has led me to CUPS-PDF, but that still doesn't allow for resolution to be set: http://www.codepoetry.net/projects/cups-pdf-for-mosx
    Why can't Apple just figure this thing out correctly and allow the resolution to be specified by the user - what an oversight given all of the feedback requests for the custom album tool. We need 300dpi as a minimum as we can always down-res if we want.
    Any ideas? I've got albums to send to clients! Help!
    Thanks

    When you import any PDF into Aperture, I think it rasterizes any PDF you import to a 150dpi flat image on import, even if it was a high res PDF to begin with. But theres the thing, PDFs don't have dpi (as such). Any shapes or text is a vector so don't have a DPI as they'll scale when printed. The images use their DPI when they were imported from the program that created the PDF.
    So I did a quick test and put a page I made from Aperture in to Acrobat and ran a preflight check on all images to check the resolution. It came back at 349.956 ppi, so this example was over 350dpi.
    I've attached the screenshot
    Jason

  • DB Adapter JCA-12563, XSD Resolution problem

    Hi,
    I am using Oracle SOA Suit, 11.1.1.4 and I am getting error in my db adapter.
    Below is the SOA adapter logs.
    This is intermittent issue, and occurs If i test the process for some time. After reeploying the service, same does not happen for some time but reoccurs after some good amount of testing.
    Can anybody help me with this issue?
    [2011-07-23T14:48:31.398+01:00] [managed1_metbsoa2] [ERROR] [] [oracle.soa.adapter] [tid: orabpel.engine.pool-5.thread-26] [userId: <anonymous>] [ecid: 16acbfc99351d211:2a7cdad1:13156bb951c:-8000-0000000000118eab,0:1:100392924] [APP: soa-infra] JCABinding=> NotificationService:DBA_GetConfigurationDetail [ DBA_GetConfigurationDetail_ptt::DBA_GetConfigurationDetailSelect(DBA_GetConfigurationDetailSelect_inputParameters,TConfigurationCollection) ] Could not invoke operation 'DBA_GetConfigurationDetailSelect' against the 'Database Adapter' due to: [[
    BINDING.JCA-12563
    Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.db.DBReadInteractionSpec due to: XSD Resolution problem.
    XSD Resolution problem.
    Unable to load Translation schemas from for http://xmlns.oracle.com/pcbpel/adapter/db/top/DBA_GetConfigurationDetail due to:
    Please make sure all used XML schemas are imported/included correctly.
    The invoked JCA adapter raised a resource exception.
    Please examine the above error message carefully to determine a resolution.

    I am also observing the similar issue , when db adapter is called getting the error
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'ObjectVersionNumber' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.db.DBPureSQLInteractionSpec due to: XSD Resolution problem. XSD Resolution problem. Unable to load Translation schemas from for http://xmlns.oracle.com/pcbpel/adapter/db/ObjectVersionNumber due to: Global element declaration/definition of name '{http://xmlns.oracle.com/apps/cac/soaprovider/plsql/jtf_tasks_pub/create_task/}InputParameters' are duplicated at the following locations: oramds:/apps/crm/services/IntegratedSoaGateway/APPS_ISG_CREATE_TASK_JTF_TASKS_PUB-24CREATE_TASK.xsd [line#: 3] http://civiceb.mfltest.co.uk/webservices/SOAProvider/plsql/jtf_tasks_pub/APPS_ISG_CREATE_TASK_JTF_TASKS_PUB-24CREATE_TASK.xsd [line#: 1] There are at least two of them looking different: oramds:/apps/crm/services/IntegratedSoaGateway/APPS_ISG_CREATE_TASK_JTF_TASKS_PUB-24CREATE_TASK.xsd [difference starting at line#:79] http://civiceb.mfltest.co.uk/webservices/SOAProvider/plsql/jtf_tasks_pub/APPS_ISG_CREATE_TASK_JTF_TASKS_PUB-24CREATE_TASK.xsd [difference starting at line#:1] Please make sure all used XML schemas are imported/included correctly. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    There is a retry logic in a composite and after 2 or 3 retries this error does not comes, Its an intermittent issue.
    Is anyone able to find the resolution for this issue?.

Maybe you are looking for