X200 standby problem both XP and VISTA BUSINESS ! ! !

i have X200 units they're both goes standby even in MAXIMUM PERFORMANCE,(it's should'nt going like that)....... but if you let the video driver uninstalled they are fine and onething i observed that those units are flickering on the screen after several minutes.....plsss help me im tired of this PROBLEM !!!...

It worked. I uninstalled the vap package and installed 1.1.14 because 1.1.19 didn't worked.
He sended the message "getprofstring is failed"
Tnx for suporrting gave you the points

Similar Messages

Problem with Quicktime 7 and Vista Business

I am trying to run Windows vista business with Quicktime 7 Latest and can not run. I get this dialog box
saying
Quicktime player requires windows 200 or later
please make sure compatibility mode is disable in the compativility tab of the properties for QuickTimePlayer.exe
I did try to change compatibility to set as Windows XP SP 2
but that did not make a diference I am still in trouble.
I did unistall the program and installed again but still the same problem. Please I need help! Thanks!

Thanks for the answer. It seems I left some other check boxes from the compativility menu on. So I realize I was running iTunes without problems so I uninstall Itunes and quicktime and did a full install of both and then it worked.
My problem was that I try to upgrade quicktime to quicktime pro and when I click on the quicktime player icon nothing will come up but if I drop a file on the icon it actually opens the file. Anyway the problem is solve. but is not intuitive to me that when you double click on the quicktime player icon nothing will happen.

Run a virtual machine under both 7 and Vista?

I have a windows 7 pro computer that is set up as a dual-boot with the OEM copy of Vista home premium.
How do I use XP mode in Windows 7 professional,
and also share another virtual machine running an image of an old Windows 98 system with the Vista OS without duplicating the 40gb virtual hard drive?
I'd like to be able to use that virtual machine in both operating systems without having to convert it back and forth, or mess with the "virtual machine editions" every time.
Is this possible? I get a message that Virtual PC 2007 is incompatible with Windows 7, but it is all I have to run in Vista. Both host operating systems are 64 bit.

So, you want Windows 7 run XP mode and run this Windows Virtual PC 2007 at your Vista? so you can run old Windows 98 on your Vista
for me, this is complicated process, what I suggest here, you upgrade your Windows 7 version (if need to be upgraded), installed latest version Windows Virtual PC version, and make Windows Vista and other OS as guest
http://www.microsoft.com/en-us/download/details.aspx?id=3702
https://support.microsoft.com/kb/958559?wa=wsignin1.0
but I don't think Windows 98 will run using this software, but some people report can, even though operating systems that are not officially supported
http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/05/27/installing-windows-98-on-windows-virtual-pc.aspx
note:
I also bit confused regarding this, "Virtual applications are not supported on Windows Vista Business or on Windows 7 Professional or on Windows 7 Professional(SP1). All other features of Windows Virtual PC are supported on these two guest systems."
You also have another option like install 3rd party Virtual application software, like Virtual box or VMware
but everything worth to try, good luck

X200 standby problem without ultrabase

I have a refurb X200 and just the basic software so far Win XP Pro 32bit. I updated power manager and drivers and patch from the Lenovo site. When I first put it into standby either by closing the lid, Fn F4 or the start menu it goes into standby in about 3 secs. and recovers in the same time when asked to. On the second and subsequent times I try to use standby (after a reboot) it takes about 16mins to reach standby - in the meantime it shows a screen with "preparing for standby" and the system is inaccessible. When it finally goes into standby it can be recovered in the normal 2-3 secs.The only way to gain control while it is going into standby is a hard shut down. Following this I again have one normal standby operation. I note people having standby problems with the ultrabase but I haven't tried this yet.

I would like to share with you that it might be because of software issue.
To diagnose, I would suggest you to please update the Power Manager software and also update the Bios of your notebook from the below mentioned web link.
http://support.lenovo.com/en_US/product-and-parts/default.page
After this, please restart the notebook and check if the issue resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problems with CS4 and Vista

Hi everyone,
Ok here is my problem im running windows vista "32Bit" on my laptop and im trying to instal photoshop CS4. I downloaded the trial from the adobe.com website and i have un zipped the file but when i click Setup.exe it just dont do anything. I have tryed deleting and re downloading but that didn't help any.
When i run the setup.exe it does show in command prompt but the CPU shows 0%
i have also tryed the things below:
Run as admin
Run with UAC turned off
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
And i have tryed when all other apps are closed
Please help me with this as i want to see what photoshop is like on vista
P.S
My laptop meets the min requirments
PPS
If you need any more info please ask

Do you have any security tools running? Is there any other Adobe software on the system? Do you see the instance of Setup.exe running in task manager's process list and does it spawn instances of msiexec.exe? When you cycle through your active apps with Alt-Tab, do you see any possibly hidden windows?
Mylenium

Multiple external drive problems, both USB and Esata

Everything worked well in Tiger on my first gen MBP. Since i switched to Leopard and now Snow, and a new UNI MBP in december 08 I have so many external drive issues.
USB drives just disappear and power off (from the system not electrical) for no reason, mostly when connected to USB hubs. I've tried various hubs including the powered ones. But as soon as i go over two USB devices in the provided ports my problems start.. It feels like not enough juice is getting through those ports on my MBP. I never have a problem if i just connect 2 devices into the MBP, but it's not enough (i have 5x1tb external drives).
Also the same with the express34 slot.. Everything was fine under Tiger and my old MBP, But now i get the grey wall of death so many times when connecting 2x esata 1TB drives. The system is so unstable with multiple drives both USB and. I'm currently working as a pro Photographer on assignment in Asia and these stability are starting to become a big problem.
God forbid i'm even considering a switch back to windows for reliability, (yes, i did use the words windows and reliability in the same sentence)
Does anybody else experience problems with multiple drives through leopard/snow leopard via Apple notebooks? I would love to hear some users experiences and hopefully find a solution to my problem.. In every other way the system works like a charm.
I will post in 2 forums because i'm not sure if software or hardware related.
Thanks, any help is appreciated.

@ Gregory
All my drives are 3.5" HD's all with external power cables along with a mains powered USB hub. Sorry, i didn't state that clearly in the original post (i thought the hint of all drives being 1TB was a dead giveaway:)).. However, this still doesn't explain the same behaviour of the 2x1TB esata drives which actually work well if no external USB drives are connected. Sorry i'm not technical but does the expresscard slot share any bridge,bus or power connectivity with the USB slots??
I'll try this SMC reset that S.U mentioned...
Thanks for everyones help and ideas so far.

Satellite A300-1IA - FN utlility does not pop-up on both XP and Vista

I've got an A300-1ia, and since a week most of the FN function keys won't work anymore.
The utility does not pop-up anymore in XP and Vista.
I have a multiboot system and the problem did apear a week ago.
I think it has to do with some windows update.

It worked. I uninstalled the vap package and installed 1.1.14 because 1.1.19 didn't worked.
He sended the message "getprofstring is failed"
Tnx for suporrting gave you the points

Thinkpad T61p can't wake up after hibernating /sleep on both Xp and Vista

Whenever my laptop goes into hibernation and sometimes during sleep, it is non reponsive when I try to wake it up. This happens on both Vista Ultimate and XP Professional. What's the solution to this problem? Is it a planar problem?
Thanks.

that's not good...
I haven't experienced the problem with not being able to wake up my laptop in the last several weeks.
What I did - I turned off the screensaver (set to "none"). Every time the problem appeared, I had the feeling that for some reasons the screen saver has started/tried to start after I had put the laptop to sleep. Later, when I was trying to wake it up, it just colud not turn off the screen saver. Most probably, I am wrong but still does not hurt to try my method .
another interesting problem - I cannot hibernate my laptop if there is a network cable pluged in. If I try ti hibernate it, it starts immediately again. This is strange as welll )
Good luck,
Mladen

Bluetooth Sync problems, Treo 755P and Vista

I recently purchased a new computer with Windows Vista. After reading the posts I realized that syncing with USB would not work, so I added bluetooth to my computer (Targus USB bluetooth adapter). When I first set it up, my 755p and my PC synced just fine, then it just stopped working. I have checked the settings and drivers and I can't figure out the problem, and I cannot get it to work again. I have tried a soft reset of my 755p. any suggestions?
Post relates to: Treo 755p (Verizon)

Hello and thank you for using the Palm Help Forums!
Are you using Vista 64 bit or Vista 32 bit?
Post relates to: Treo 800w (Sprint)

MMC Console -- install fails on 64 bit systems (both W7 and VISTA Ultimate)

Hi all
was trying to install trial version (ABAP) on W7 X-64 bit
MMC snap in console fails to install -- message SAP MMC snap in
This installation does not support 64 bit Windows operating systems -- please use the the corresponding 64 bit version of the installer.
I tried also running in "Compatability mode" same error.
Since this has to be installed first I didn't bother installing the rest.
Any news -- these days 64 bit CPU's are the norm even on smaller laptops so I'm a bit surprised this doesn't work on a 64 bit Windows system.
With a decent amount of RAM in the system I don't won't to be restricted to 3GB on a 32 bit system anymore .
So very surprised here that this doesn't work.
Any news on a 64 bit update.
(It works on the 32 bit version of W7 running under a VM but I really want to run it on a 64 bit system on a physical machine).
Cheers
jimbo

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Problems with iTunes and Vista.

I recently got a new laptop that runs Vista 64-bit. I downloaded the latest iTunes (I didn't know I needed the special 64-bit one then). It copied my songs in duplicate, and some in triplicate, and after I'd deleted the extra ones it couldn't find any of the songs that were left. I uninstalled and reinstalled it. The second time around, the installer suggested I get iTunes for 64-bit Vista.
That version of iTunes, though, refuses to open. I only get an error message saying that it can't load my iTunes library because it was created by an earlier version of iTunes. I made sure to delete every folder associated with iTunes before uninstalling it and reinstalling the 64-bit one again. Same result. I uninstalled and reinstalled again. Same result.
I'm getting seriously annoyed. Please help.

You need to use the shift-start of itunes to open those old ITL files.
Press *and hold* the shift key and browse to them when prompted.
http://docs.info.apple.com/article.html?path=iTunesWin/8.0/en/15502.html
But really it might be best to move the older ITL to the normal location before doig that. iTunes will start adding stuff to the Previous iTunes Library folder if you open it from there.

Official release of XP and Vista drivers for Satellite Pro P100-465 PSPAEE

When will the drivers be available for both XP and Vista for the PSPAEE? Currently there are drivers for the PSPA4E some of which work, some not, on either operating system. Yes the laptop is preinstalled with the Vista Ugrade and the drivers work but two of the driver apps are blocked by Defender (NDSTRay / ConfigFree and VolControl). I could get no options to enable these (unclassified as yet from MS so they are locked out) I was told to disable Defender by tech-support!
I have tried a clean install of my own version of Vista Business and had driver problems with that as well.
I would like to run XP until Vista is, shall we say, more efficient but would like to use drivers specifically for it so a time-frame would be very useful.
I'd also like to know why there is a plug where a finger-scanner could go underneath the 0 of the number-pad, and a blocked-off lower PCMCIA (PCI-E?) port when neither of these are available as upgrade options? Did I miss those upgrade options or is this a case recycled from another model where they are available? If the latter then that's pretty cheap for a new machine :)

The Toshiba USA site offers comprehensive information on Vista upgrade and drivers for P100/105 machines which include similar ones to those released in the UK/Europe. If you want to be at the bleading edge of technology/take a chance see
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1671921&moid=1674690&BV_S essionID=@@@@1075792543.1174388169@@@@&BV_EngineID =ccciaddkhddlhhkcgfkceghdgngdgmn.0&ct=DL
Cheers
Martyn

Use Firewire Drive with both OSX and XP

Hi,
I am in the process of migrating to a Mac from Windows XP. I have an external hard drive (WD MyBook Pro 250gb) which I have been using to backup data to from Windows. The device is currently formatted to 120gb using NTFS so that Windows can backup to it. The remaining space is currently unformatted.
I need to keep my Windows data for a period while I become comfortable using the Mac before decomissioning the PC. I had assumed that I could maintain the XP NTFS partition, and simply partition the remaining space as an HFS/HFS+ partition using the Disk Tool in the Utilities folder. However, when I attempt this, I don't get any option to format the remaining space - not even as FAT.
Previous experience with Linux led me to believe that this would be easy to accomplish on Mac OSX, but it appears not to be the case.
I have searched Google and other Apple Support forums. At this point I am unsure if it simply a lack of knowledge on my part, or if this just flat out cannot be done with OSX.
Once I am happy that the migration is successful, then I will trash all partitions on the Firewire drive and simply have one HFS/HFS+ partition, but I'd like to have the extra comfort of keeping my data in the interim.
Many thanks for your effort on providing guidance.
Mark

Why not format the remaining space in Windows as FAT32? That way both your XP and your Mac can read and write to the FAT32 space, XP can read and write the NTFS space, and the Mac can read and copy from the NTFS space. The reason I suggest doing the FAT32 format in Windows is because I have had number of cases where Windows (both XP and Vista) simply would not recognize a Mac formatted FAT32 partition, whereas the Mac has never had a problem recognizing and using Windows formatted FAT32 partitions/drives. Once you are quite done with the Windows XP machine and have transferred all the data off the drive, you can then select the whole drive and do a low level reformat. At that time you'll want to change it from the Master Boot Record partitioning scheme it undoubtedly currently has, to the GUID Partition Table that is preferred for Intel machines and Leopard.
Francine
Francine
Schwieder

Freehand and Vista

Is anyone running Freehand on Vista? If so are there any
problems? I used Flash as a vector graphics program for years, and
was extremely happy with the ease of use. (I mostly import jpeg
files into Final Cut Pro). I am thinking of changing over from
Flash to Freehand.

No problems with Freehand and Vista.

Satellite pro s300m - Upgrade from XP Pro to Vista Business

Hello All
I bought a new Satellite Pro S300m Ez2401 and it came with Vista business and i downgraded it to XP Pro using the XP Pro media that accompanied the Laptop.
If i want to upgrade it to Vista business, How do i do it? I did not create a recovery Media when i switched on the system the first time and Vista Business came up.
Would the preinstalled Vista Business be in the Hard Disk and can i upgrade it from there?If so, would it also have the drivers along with it?
How many Intel WiFi 5100 AGN antennas does my laptop have?
Thank you.
Jay
Solved!
Go to Solution.

Jay,
To find out whether or not your recovery partition is still intact, shut down the system (not in Stand By or Hibernate mode). Then press and hold down the '0' (zero) key while turning the system on. It will boot into a recovery menu if that partition is intact.
You won't be able to upgrade to Vista Business, and by that I mean that you cannot retain your data and programs. But you can return the laptop to the factory condition with a fresh installation of Vista Business.
So you'll end up with exactly what you had when you first took it out of the box and turned it on, including an appropriate set of drivers. Before running the recovery process, you'll want to backup all data you want to keep, and when recovery is complete you'll need to reinstall any software.
If holding down '0' while turning the system on does not result in a recovery menu then you can call Customer Service (800-457-7777) to order a set of recovery media for a nominal fee.
Jim

X200 standby problem both XP and VISTA BUSINESS ! ! !

Similar Messages

Maybe you are looking for