X200 WWAN (f3507g) compatibility issue with Juniper Network Connect VPN

I have just recently received my X200 with the build-in WWAN which is a Ericsson f3507g card and found that it causes my Juniper VPN software unable to load, and I have also noticed other applications like Outlook is rather slow. When I "Disabled" the WWAN card in "Device Manager"->"Network Adapters", all apps work perfectly. I am using 32-bit Vista Business.
Can someone test and see if you have the same problem as mine? I am wondering if this is a driver issue of the f3507g WWAN card.

Hello
I have just spent all day trying to work out why Outlook takes forever to connect on initial start. It was purely by luck/perseverance that I happened to notice an "ipconfig" stuck for a second on LAN2 - which is the ericsson card.
I too then disabled this adapter and found Outlook performance cured. I had popped along to these forums to find a fix but at least I can verify the issue with you.
Bloody annoying since I've only had the X301 1 day - I bought it for use whilst my X300 is having its wireless-freezing issue sorted. Not a good advert for Lenovo I think.

Similar Messages

Extreme slowness with Juniper Network Connect

Hi there,
I recently switched from cable modem to fios and I am very frustuated with fios as the company vpn speed slows down gradually (while I never had any issue with cable modem) to 0.5 mbps from 50 mbps in a few hours. I often try restarting modem and reconnecting which helps sometimes. My company IT reported no problem and my colleagues on cable also report no problems with vpn. My desktop is directly connected to the cable modem via wire (not wireless).
I would appreciate any suggestions.
Thank you,

While this is not a Windows 10 specific issue (it happens in Windows 8.x, too), I wanted to discuss it here to see there was a solution.
When using either of my corporation's two VPN options, Juniper Network Connect and Juno Pulse, I cannot use any Modern apps that have network access. BUT, this does not seem to effect Microsoft's Modern apps, like Mail or the Store.
As an example, Nextgen Reader, cannot synch with Feedly when I am connected to the VPN, but it works fine otherwise.
Yet, I can synch my OneNote notebooks or I can visit the Windows Store, so it doesn't seem to be strictly a problem with the VPN software.
Does anyone know of a work-around for this? Is this something that can be better addressed in Windows 10 so this is no longer an issue?
Do you you the VPN in Windows settings or install a client. My organizations info-structure won't allow to connect using the VPN built into Windows 8/10. In Windows 8 i installed the client and enter my companies connect information and it works. But the
same thing doesn't work in Windows Technical Preview.
Jake

Snow Leopard and Juniper Network Connect/How to temporarily disable Bonjour

Hi All,
I have encountered a problem with Juniper Network Connect running on my MacBook Air. I can connect successfully to my company's VPN but on my MacBook Air Junipers Network Connect started to dis- and reconnect in changing time intervals.
After some googling I am pretty sure that it has something to do with the Bonjour service changing the routing tables. I wanted to confirm this and activated "Back to my mac" on my MacBook Pro which up to now did not had any problems connecting to my company's VPN. Now it has the same issues.
My question is whether there is any way to temporarily disable Bonjour, ideally via Apple script. Up to now the only solutions I found were to either
- disable mDNSResponder which would also prevent accessing any websites or
- disable multicast advertisements (http://support.apple.com/kb/HT3789?viewlocale=en_US)
The latter approach includes editing a properties file and restarting the mac, thus would be less than ideal for just quickly dis- and enabling bonjour. Furthermore I am not quite sure whether this really solves the problem of updating the routing table.
Any advise is greatly appreciated.
Thanks,
equinox

If you are using an Airport or Airport Express base station: go to Utilities>Airport Utility. When it's found the Airport, click on 'Manual Setup'. In the next pane, click on the 'Wireless' tab; when that pane opens click on 'Wireless Network Options...'. Check 'Create a closed network'.
If you are using another manufacturer's wireless router you will need to look at their instructions, but the principle is the same - it may say something like 'Hide SSD'.

Mac OSX 10.7.5 + Java 7.11 Juniper Network Connect fails

I am running Mac OSX 10.7.5 and just upgraded to Java 7.11. As a result, my Juniper Network Connect vpn now fails - I can't even install the software. I see the following error message "An error occurred while extracting one of the Network Connect components." I made sure the keystore password was set to changeit using the following:
sudo keytool -storepasswd -new changeit -keystore /System/Library/Frameworks/JavaVM.framework/Resources/Deploy.bundle/Contents/Home/lib/security/cacerts -storepass changeme
However, I continue to see "An error occurred while extracting one of the Network Connect components."
Any ideas?

retrana wrote:
I made sure the keystore password was set to changeit using the following:
sudo keytool -storepasswd -new changeit -keystore /System/Library/Frameworks/JavaVM.framework/Resources/Deploy.bundle/Contents/Home/lib/security/cacerts -storepass changeme
However, I continue to see "An error occurred while extracting one of the Network Connect components."
Just a guess, but that looks to be the location for Apple Java 6, which is not replaced when you upgraded to Java 7, rather Oracle stores it in a different location.
It's also possible that Juniper has not updated their software for Java 7. I know that's true for at least one other VPN vendor.

After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.

After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.
Anybody experiencing the same problem and any suggestions to fix the issue.

Hi ..
Try this discussion > Can't connect to Juniper VPN

E2100L Cisco Connect and Network Magic compatibility issues with Mac OS X 10.7 Lion

When you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
Regards,
Daniel

Older versions of Cisco Connect for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system.
Here is the link to ensure that Cisco Connect can be installed on your Mac: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a4e763be954243cfa0ab960c0fac7105_KB_23xxx_EN_v1.xm...
There is no such information about the release of Cisco Connect for E2100L for the Mac OS X (10.7 “Lion”) compatibility, so you need to wait for further release of the firmrware for E2100L.

Are there any compatibility issues with Sonos and Airport extreme??

are there any compatibility issues with Sonos and Airport extreme??

Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

HT5306 I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? compatibility issues with wh

Hello:
Thank you for the update for remote access for desktops.
Personally, I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? I do use this lap top in other countries. compatibility issues with what?

Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers and my iTunes wifi sync isn't working. Anyone else having the same problems?

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...

Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.
Everything works perfectly previously on 10.8.4 and 10.8.5. I did not test on 10.9.0 as I went straight to 10.9.1. Anyone else having this problem? Any thoughts on resolution?

OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
Hope this helps if anyone has a similar issue

Adobe Acrobat 8 Standard compatibility issues with Office 2007 and Windows 7

I just updated my platform to Windows 7 and upgraded from Microsoft Office 2003 to Microsoft Office 2007. The PDF printer did not download and realized that there are compatibility issues with Office 2007. How could I get this fixed?

Buy Acrobat 11.

Compatibility issues with mac OS - Lightroom 4 works where CS5 won't

Hope someone can shed some light on this issue...
I tried installing Lightroom 4 on Mac OS 10.6.1 (which is currently running CS5 without issues) but the specs call for OS 10.6.8 or later (10.7). When I updated my OS to 10.6.8, none of my CS5 apps work! They encounter launch errors - InDesign, Illustrator, Dreamweaver... only Photoshop seems to work. So, I reverted back to OS 10.6.1 and all the programs function. Is Adobe working on a solution to fix this issue? I see with the forums that several other users have noted the same issue with CS5 not working in the OS 10.6.8 environment. I don't want to upgrade my OS just to have Lightroom function, but none the CS apps. I was thinking of partitioning my HD to load both OS, but that shouldn't be the workaround. I am very disappointed that I've purchased Lightroom 4 and now am unable to use it due to compatibility issues with the OS with the rest of CS5.0.

Pixelzboy are you receiving any specific errors when launching your applications under 10.6.8? CS5 should work just fine with 10.6.8 as well as 10.7.3. You may also want to post to the product specific forums with your launch errors as the users in those forums will be more familiar with troubleshooting steps specific to those products.

Are there compatibility issues with 1st gen I pad and new wireless printers?

Need to replace HP printer being used with 1st Gen I Pad. Are there any compatibility issues with new wireless printers?

Hello jxroads,
Welcome to the Apple Support Communities!
I understand that you are going to replace your printer and would like more information on what printers are supported for AirPrint. The attached article has a list of AirPrint printers currently supported for iOS devices.
About AirPrint - Apple Support
Cheers,
Joe

Microsoft ERP MA (3.3.1077.2) for SAP and compatibility issues with SAP 6.0

Hi all,
I want to configure the ERP MA (3.3.1077.2) for SAP on ILM 2007 in order to synchronize passwords between AD and SAP. I have several instances of SAP. The SAP versions are as follow:
SAP ECC 6.0 7.00 - 64bit
SAP ECC 6.4 7.01 - 64bit
SAP BI 7.1 7.01 - 64bi
I was wondering whether there are compatibility issues with any of the above mentioned versions.
Your feedback is appreciated.
Regards,

Did you install a Java machine JRE ? If no, when you do the drag and drop you have the popup but it does work
[http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html |http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html]

X200 WWAN (f3507g) compatibility issue with Juniper Network Connect VPN

Similar Messages

Maybe you are looking for