X200s - problems switching from mains power to battery - temporary freeze

Hi All,
Noticing a problem with a brand new x200s downgraded to Windows XP from Windows 7 (although never operated with Windows 7) where there is a temporary freeze when either connecting to mains power, or disconnecting from mains power. While it is not a proper freeze, as I can ALT+TAB between applications, I cannot actually do anything (close AP's, write emails etc). This lasts for up to 3 or 4 minutes, and then everything recovers - recovery happens to the extent that anything done during the freeze suddenly happens, like pressing the ThinkVantage Button, or right-clicking on a taskbar item etc.
I wonder if this is something to do with the Lenovo power management system - anyone got any ideas please?
Many thanks

Hi,
make sure, that you are using the latest version of Power Manger , power mangement driver . These two parts are basically responsible (when they are installed) for the power configuration.
Please let me know, what is the version of Power manager and power management dirver, that you are using.
Also based on you description, when all is working, when pressing ATL+TAB, then try to open Task manager with CTRL+Shift+ESC and check, what is taking the CPU and memory comsumption.
Once this will not show you anything, go to Windows Event log, maybe there you can find some hint.
Just to make sure, that I understand this corectly: You see this kind of behaviour, when you unplug or plug in the sytsem into AC ?
Cheers

Similar Messages

My ipod touch 8g 2nd gen doesnt charge from mains power or macbook

my ipod touch 8g 2nd gen doesnt charge from mains power or macbook when plugged in, it has just suddenly stopped working.

See:
iPod touch: Hardware troubleshooting
iOS: Not responding or does not turn on

Charge a Zen v Plus from mains power and still play mu

Does anyone know if you can charge a Zen V plus from mains power and still play music?

Creative could save its Help Desk/Support people and their consumers <i>endless</i> amounts of aggravation if they simply included a Mains wall charger with every player.
How much does a charger cost at the factory level when you make thousands upon thousands of units?
As it stands now this policy forces people, many of them not very handy with computers [and by the sounds of reading this forum, not everyone in the world is running XP with Service Pack 2 and has all their computer's ducks in a row...] to troubleshoot their USB ports, hack their Registry, delete and re-install firmware and software.
A lot of that is completely over the heads of people who merely want to listen to their favourite music and simply charge their shiny new Zen DAP.
How many people give up when they can't get their Zen recognized and return it to the store, never to buy Creative again?
One it too many when the solution is so simple and inexpensi've.

No Mains Power or Battery Chargeup, Not a Battery or Power Adaptor Fault

I have an iBook G4 12" purchased March 2006. It's been heavily used but the only problem I've had with it was last year it developed a tendency to shut down without warning. This was solved by taking the battery out and hasn't been a problem since I replaced the power lead. So otherwise no problems with the computer.
I mostly use it on the mains but a couple of times a week have it for 30 mins on battery. A few weeks ago it started to struggle charging up afterwards. A change of "routine", eg. plugging it into a different socket or adding the extension to the power adaptor, would trick it into working again. But the problem got more frequent until, a couple of weeks later, it was charging up then suddenly switched into battery mode and has been stuck there ever since.
I have changed the battery and power adaptor and this has made no difference.
A couple of odd things to note: using the old battery (5 mins a day for emergencies) it had got down to 35% then the Software Update launched and the battery suddenly dropped to 0% and went to sleep. This is when I had to buy the new battery. Also, when I pull the plug out of the mains with the barrel connector still in the computer, instead of the LED going out instantly it stays on for 10 seconds then fades out.
I've had a couple of tricks suggested that have failed: powering up through the mains with no battery in, also pressing ShiftControlOption for 5 seconds before powering up.
Please does anyone have any suggestions as to what might be wrong? Thanks.
Message was edited by: ValW

The charge and run issues may be related to a failing DC in-board.
You may be able to get the correct part and replace it yourself, or
have a repair tech do the task for parts-plus-labor charges.
There are some DIY pages online, such as those from iFixit:
http://www.ifixit.com/Browse/iBook_G4
Good luck & happy computing!
+{ PS: Hello, and welcome to Apple Discussions! }+

Problems Switching from iPhone to Samsung Galaxy S4

I switched from an iPhone to a Samsung. Why do people with iPhones continue to have problems texting me. They tried deleting my iMessage streams and re-entered my phone as a mobile. They still get error messages. It's been a week since I got the Samsung.
By the way, I have deactivated my iphone number on the Apple ID website.
ITH

Unfortunately I have turned off iMessage from my iPhone and have called in to deregister. It's been almost 24 hours and it's still not working correctly. The HUGE issue is that I've basically been told "it will eventually start working". Well, I didnt pay you have the money and tell you I'd send the rest when it started working. You are a huge company dealing with another huge company. I PAID THE MONEY AND YOU TOOK IT BUT THE PHONE IS NOT WORKING THE WAY IT IS SUPPOSED TO. If you cant make a device work, you should not be selling them with the assumption that you can use it when you pay right then. There are so many forums and threads about this problem but yet nobody mentioned it at the verizon store. I will not be a customer by this evening is this doesn't resolve. This is **** poor business and terrible communication about switching devices. The largest network is doing a great job of pushing me back to AT&T. Rediculous!!

My ipad will not charge from mains power

my ipad doesnt charge even when connected to mains with the cble and usb charger provided it just shows a not charging symbole next to the battery level and sometimes pops up with a message stateing that i can not charge with this accseriore i need help urgently

Do you have access to another charger and cable? You could have a bad charger, bad cable or problem with the cable to iPad connection. First test would be a different charger and cable to see if that resolves the problem.
If not, you need to visit an Apple genius bar and have the techs check the system to see where the fault is.

Different WiFi speed with main power and battery

Hi,
I have a 4mbit adsl connection, I've noticed that when the notebook is connected to the power the navigation speed is very fast, when powered with the battery the speed drops to 5-6 KB/sec.
There's some setting to resolve this problem?
Thanks

Hello Fabio
Its a strange issue but firstly you can check the power settings in the wireless card properties. Please go to Device Manager then right click on Wlan card ->Properties.
There you should find a Advanced tab. All settings should be set to Use default value and Highest.
Best regards

Problem switching from AP-specific to Group-specific VLAN mapping

Hello.
Some days ago, I updated our 5508 WLC to software version 7.5.102.0.
With that version, it should be possible to have a VLAN mapping specific for a Flexconnect group that is set within Flexconnect Group settings.
I did that for all my Flexconnect groups and it works fine with new access point.
For existing access point, which already have an AP-specific VLAN mapping, it is not possible to switch to Group-specific.
When I mark the WLAN in Flexconnect setting of the AP and select "Remove AP specific", I get the error message "Request failed: Vlan is not enabled on this flexconnect".
I wonder what the problem could be, because for newly installed access points, it works fine. Did I miss some settings?
Regards,
Sven Lindeke

Thanks for the fast reply.
Here are the screen shots:
Settings "Flexconnect group"
Settings "Access Point"
Error message

Problem switching from year to year-1

Hi there =),
I've coded some little thing, that shows the momentary weekofyear and the monday and friday in that week (dd.MM.yyyy). There're also 2 links who let the
weekofyear go -1 or +1 and then change the monday and friday automatically.
My problem is, that I do need to go to the last year sometimes. So I click the "-1"-link and the w.o.y. goes 20, 19, .... 3, 2, 1, 0, -1, -2, -3, ...
First, in reallity there's no week number 0 or -1 or -2...So I need to fix this, too
So I need to set the week to 52 or 53 if it less than 1. But how do I manage this?
Here is some code:
// This code is to change the w.o.y., if the parameter kw_change is 1 or -1:
Calendar calendar = Calendar.getInstance(Locale.GERMANY);
if ((request.getParameter("kw_change"))!= null)
     switch (Integer.valueOf(request.getParameter("kw_change")))
          case -1:
               session.setAttribute("kw", new Integer(((Integer)(session.getAttribute("kw"))).intValue() -1) );
          break;
          case 1:
               session.setAttribute("kw", new Integer(((Integer)(session.getAttribute("kw"))).intValue() +1) );
          break;
Integer weekOfYear = (Integer) session.getAttribute("kw");
if ((session.getAttribute("currCalendar")) != null)
     calendar = (Calendar) session.getAttribute("currCalendar");
calendar.set(Calendar.WEEK_OF_YEAR,weekOfYear);
calendar.set(Calendar.DAY_OF_WEEK,Calendar.MONDAY);
SimpleDateFormat sdf = new SimpleDateFormat();
sdf.applyPattern("dd.MM.yyyy");
session.setAttribute("currCalendar", calendar);Times before this code, this code sets the kw (calendar-week in german) to the current kw:
Integer kw = new Integer(calendar.get(Calendar.WEEK_OF_YEAR));
session.setAttribute( "kw", kw);I really have no good idea to solve this. So if there are any suggestions, I'm very thankful. I don't necessary need a complete solution. I'm just out of ideas >.<.
Best regards
X--spYro--X

case -1:
               session.setAttribute("kw", new Integer(((Integer)(session.getAttribute("kw"))).intValue() -1) );
     break;replace this code with the following
case -1:
       session.setAttribute("kw", new Integer(( ((Integer)(session.getAttribute("kw"))).intValue() == 1)?53:((Integer)(session.getAttribute("kw"))).intValue()-1 );
break;here i am assuming that after week 1, it'll goto week 53.
for case 1 you can implement the similar logic.
i hope this is helpful
Diablo
Edited by: Diablo_Chiru on May 16, 2008 2:48 AM
Edited by: Diablo_Chiru on May 16, 2008 2:49 AM

Mobile performance decrease! - Severe problems switching from PFI to AIR 2.6

Hello all,
I am currently developing a rather popular title for the iPhone . It is my first ever attempt at creating something for the Mobile Market.
I started using Flash CS5 and the packager that comes with it. I optimized my game so that it ran perfectly well on 30FPS in every aspect on the iPhone 4 and iPhone 3GS.
I was really excited when I read about the new features and supports in Flash CS5.5 so I purchased Flash CS5.5 to move all my production to it.
However I noticed a severe decrease in performance as I tested publishing my game in Flash CS5.5 (Air for iOS). I understand that the new "packager" does things differently and so I have also been doing things accordingly but it still acts very instable. For instance, I have a scene with a background cached as bitmap and two short animated MC's that loops (these MC's are not cached or using filters or blending) . So I have three elements but still the FPS drops to around 3-5 FPS even though it is set to 30. On the next scene I have four elements, a background cached as bitmap and three of the same short animated MC's that loops and this works flawlessly. The backgrounds themselves is equal when it comes to what it contains. I practically have nothing on the screen and it will drop FPS!
I have discovered that when MC's containing FBF animation (like blood splatter or water splash) plays on the scene it dramaticly decreases performance. I tried Modify -> shape -> optimize... and optimized those FBF animations with 83 % but no improvement in performance were seen. When I made every frame of the blood splatter animation into an MC and exported them all as bitmaps it worked without problems but this cannot be done through the whole game and especially not in the cutscenes.
I have read and researched my eyes out and pulling my hair til baldness so now I turn to the forums for help.
If anyone out there would be willing to help I would be extremely gratefull!
Thank you,
Daani

Hello Colin!
Thank you for such a great and fast response! I needed some basic knowledge about how rendering in Flash actually works. Thanks!
I will definetly try cacheasbitmapmatrix = new Matrix() immediately even though I actually found a wierd solution for my FPS problem that I have described below.
I discovered that most of the time the drop in FPS would only occur when textfields would be on the stage. I saw that they didn't embed anything (which means that they embedded all) and perhaps this was the problem that caused the whole doc to drop in FPS. Since I have no need to edit the text any longer I simply broke them appart until no text field existed, only vector graphics. As soon as I tested this new version on my iPhone everything is top performance. Why would something that feels so small as a text field cause the whole app to malfunction?
Another problem in my game is that I have some quite intense animation sequences where blood splatter occurs within an MC. This scene is very laggy when beeing played. I tried a lot of different things and I discovered that if I put that sequence (which exist within an MC) hidden on screen (with a loading image above) before the actual sequence is going to be played it's as if Flash stored that sequence and when it's actually going to be played for the viewer it plays without any drop in FPS at all. I'm no optimizing expert as I have never worked with really limited performance devices. How would you "load" these sequences before they appear on the screen?
And wow! That Air 2.7 seems like something groundbreaking! Can't wait for it to hit the market!
Again, thanks for your support Colin. Massive appreciation from this side!:)
Peace,
Dan

Problems switching from personal domain to .mac

I'm wanting to move a site from my personal domain to .mac. However, when I attempt to publish the site it automatically attempts to publish to my personal domain. How can I change the settings to publish to .mac?
I attempted to solve this problem by creating a "new" site, but it still tries to publish to the personal domain rather than .mac.

I've done it. I just copied my data to the Mac and also copied the library files:
http://docs.info.apple.com/article.html?artnum=93732
This preserved all my ratings and playlists, etc.
I think there was a little bit of magic to get iTunes to find where all the music was now stored. It wasn't that difficult though. Plus only do this before you delete all your stuff on the Windows machine.

Problems switching from MobileMe to iCloud

I had a MobileMe account and now I need to switch to iCloud. I want to keep the prefix from my MobileMe email account. When I start the iCloud process and try to enter my prefix it claims it is already taken. And I think it is taken by me
I want to keep the rail prefix, how do I do this?

MobileMe closed a year ago and if you did not migrate to iCloud before the end of August last year you can no longer do so. This means your @me.com address is no longer active.
It's not clear whether you can open an iCloud with the same prefix, but you won't be able to get an @me.com address. Go to System Preferences>iCloud (Lioni 10.7.2 or higher required) and sign in with your @me.com address. As this is an Apple ID (even though it's not functioning) you may be able to do so and get an @icloud.com address, though it's possible you may have to choose one with different prefix. If it won't accept the @me.com address as an ID you will have to get another Apple ID and try with that.
If you do use the @me.com address as an ID you need to make sure you have an alternate contact address since if Apple try to contact you at it, it won't work.

Problems Switching from Prepared to Supervised in Apple Configurator

Hi all,
I am at a school managing a cart of iPads. I was using Configurator just to Prepare them and push out a profile and apps. I didn't use Supervise, because I wanted to be able to plug them in to other computers to transfer video. Some update to Configurator came out and I can no longer use Prepare to install paid apps. Frustrating, but okay.
Next I turned on Supervise so I can install paid apps again. Apparently this requires erasing the iPad. Okay, fine. iPads were erased and set to Supervise, but I have no redeem codes left! I can still see that the redeem codes are in Configurator, and are matched up to the iPad serial numbers, but I can't check the box to install them. This is different from the problem of having lost the Configurator information described here: http://support.apple.com/kb/ht5194
Can someone explain how I can use my existing match of serial numbers and redeem codes to install apps?
OS 10.7.5
Configurator 1.2.1

Hey Neil,
Unfortunately, iPads that are Supervised with Apple Configurator can only transfer files/photos via USB to the computer that it was supervised by. We ran into the same thing in our school district. If you want to get videos or photos in any other way you will need to go wirelessly.
We've been using Dropbox to transfer photos and videos from iPads and its been working great. The Dropbox app has a very cool auto-upload process that will automatically upload photos and videos from the iPad Camera Roll to Dropbox. Once you log in to the Dropbox app on the iPad with your account, click on the Photos icon in the lower left corner of the screen (second one from the left). Then select "Enable Camera Upload" and "Only Wi-Fi." The upload process will begin for all existing photos and videos in the Camera Roll. From now on, all future photos and videos taken by the iPad will automatically upload to the Dropbox folder.
If each student has a Dropbox account, they can "share" their photos folder with the teacher so that when the teacher logs in to his/her account he/she will see all of the students' videos and photos.
Hope this helps!
~Joe

Problem switching from a non Idea Exchange board to an Idea Exchange board when typing a new post

Tested on Chrome/XP and IE8/XP
when I start a post in a non Idea Exchange forum and later on want to convert it into an Idea Exchange one, I can switch to the correct forum using the "Select Board" pull-down list. However, when posting, my post is refused because I haven't chosen a "Label". Well, that's because I can't!
In other words, switching to an Idea Exchange board does not add the "Label" options on the composition webpage, hence it is impossible to post that idea unless you copy it (or rely on the autosave function), start a new post directly into a Idea Exchange forum and paste your old post in it (or alternatively, load the saved draft once you have created the new post).
Disclaimer: this may have already reported, but as I said elsewhere, the Search function doesn't work either...

This is my first post so be gentle with me. I have a Pixi Plus running os 1.4.5. Last week we upgraded to exchange 2010 (or 14 as I've heard it called). I lost the connection on my phone. I tried changing the inheritable permisions above and it has not solved it. I'm pretty sure all the log in info I'm using is correct. It acts like it's communicating with the server because it says
Unable to sign in
Could not sign into account
THe mail server responded: bad login/password
I've changed several things and when I change certain things it says it cannot validate incoming mail server so I feel like I'm close but can't figure it out. Any help would be appreciated. Thank you.

Problem display from solar power charger

anyone can help me to solve the problem in my snippet? i can't display my voltage etc on my manual control mode, but auto mode can be display. currently using labview interface for measurement, arduino for control servo motor.
Attachments:
latest testing.png ‏267 KB
asdasdasd.png ‏448 KB

Duplicate - http://forums.ni.com/t5/LabVIEW/labview-manual-display-problem/m-p/3110137

X200s - problems switching from mains power to battery - temporary freeze

Similar Messages

Maybe you are looking for