X200s Win7 64Bit 4GB only 3GB usable

Hi,
how do i activate the memory remap functionality in the BIOS of the X200s. I guess there is a bios extension for that, because I can´t find it.
I am on Win7 64Bit 4GB RAM installed and only 3GB are usable. (which is awful)
Cheers,
André

you can't control memory remapping through the bios, it is all controlled by the software AFAIK.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Satellite A200-21T: Windows 64bit recognize only 3GB instead of 4GB of RAM

Hello!
I have a A200 21 T with windows 7 (ultimate *64) install.
My problem is that the windows only takes 3Gb!!! How "can i use" all of the ram?

Hi,
Please, read here:
http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm
As addition:
Go Start-Control Panel-System security -Administrative tools- System configuration-Boot - advanced options
make sure that maximum Memory option is not checked. If it's checked, uncheck, press Apply, Ok and restart.

Win7 on mac: only 2.18GB ram of 4Gb is usable

dear fellow mac users,
A macbook pro with the following spec:
- CPU: 2.4Ghz core i5
- RAM: 4GB
- HDD: 320GB
- screen: 15.4 inch
- intel HD graphic
- NVIDIA GeForce GT 330M graphics processor
i have installed a windows 7 ultimate edition along with mac oS 10.6.3. when i boot into mac, i can see the system can utilize the 4GB of ram.
the problem is when i boot into windows 7, checking the system property, it shows "RAM 4Gb (2.18 usable)". when i check the resource monitor tool, i find out that over 1Gb of RAM is reserved for hardware. why so much memory is reserved for hardwhare, how can i use make the whole 4GB available for use?
please note that both mac OS X and windows 7 are newly installed, no third party app has been installed yet.
I've attached both the system screenshot and the resource monitor screenshot for reference.
http://filedb.experts-exchange.com/incoming/2010/07_w30/329093/screenshot.jpg

Hi and welcome to Discussions,
unless you use the 64-bit version of Windows 7 (or XP or Vista as well) you will never be able to get the full 4GB RAM for your 'own useage'.
It's a limitation of 32-bit WIndows.
Have a look at these articles:
http://support.microsoft.com/default.aspx/kb/929605/
http://www.anandtech.com/gadgets/showdoc.aspx?i=3034
http://www.bing.com/search?q=32-bitoperatingsystem
http://blogs.msdn.com/b/hiltonl/archive/2007/04/13/the-3gb-not-4gb-ram-problem.a spx
Regards
Stefan

Satellite Pro A200 - Shows only 3GB instead 4GB RAM

Hi,
2 years ago I got a Satellite Pro A200 as a business notebook and it runs with XP SP2, later with SP3. With 2 GB it shows 2 GB of memory in Windows - and I know it has a Radeon 7500 with 256MB of individual graphic memory, and it has no shared memory.
I upgraded it to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and the ATI system monitor shows 4 GB. I know that 4 GB is not possible in XP 32 bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems I have seen values between 3.3 and 3.7 GB.
So where is the memory? It looks like a bug - the memory chips have both 2 GB I have verified this. Because it is a company notebook I can't just upgrade to XP 64 bit :-(
In the BIOS are no options - first I thought it's the graphic card, but mine has independant graphics with own memory so the computer comes up with 2048 MB or 4096 after the upgrade.
Shared memory would show about 1900 MB of RAM to the OS like my private EEEpc.

> I upgraded it to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and the ATI system monitor shows 4 GB. I know that 4 GB is not possible in XP 32 bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems I have seen values between 3.3 and 3.7 GB.
First of all 32bit OS (no matter if its XP, Win 2003 R2, Vista or Win 7) will not recognize 4GB RAM but only 3.2GB (and not 3.7GB)
I have no idea where you looked for available RAM but you should run DXDIAG in RUN.
Then you should get some details and also the available RAM.
Secondly the graphic card supports Local cache (256MB) and HyperMemory.
HyperMemory of the graphic card depends on the available main RAM memory.
For example the unit supports 1024MB RAM (1GB) then the hyper memory would be 256MB this part of RAM would be shared with graphic card!
This is the reason why the only 3GB are shown...
PS: regarding such comments and a tip:
> hey man please think before you answer.
This is a community and all people here try to help each other so be always thankful for all kind of answers

Win7 64bit

I currently have 4GB RAM on my Lenovo Thinkpad T500. I've been using Win7 32bit but decided to dual boot with Win7 64bit, mainly to see if I see a diference having on OS that uses all 4GB. I'm also prepared to max the memory to 8GB if I decide to go soley with 64bit.
I'm basicily looking for insight for other users experience with 32bit vs 64bit. Most my apps will go either way. I'm not a big user of CAD or other memory hungry apps. I've read that 64bit is more secure. Is this true?
I appreciate any advice you may have.

I preffer 64bit I don't know if its more secure or not ,PC are only secure as we the user make them. if you go with 64 & 8GB ram & get SSD you should have a fast T500
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

How to enable multi-finger touchpad gestures on 2740p win7 64bit tablet.

I recently purchased an HP 2740p that works pretty well. The issue I'm having is related to the multi-finger touchpad gestures. I'm a huge fan of two-finger scrolling, and the manual for this tablet states that this pc has multi-finger scrolling. The manual also describes/explains how to use this feature. However, when I first got this tablet, the "multi-finger gesture" options were grayed out in the synaptic touchpad setttings window. I then elected to install the latest synaptic touchpad driver in the hopes of enabling this feature, but this only allowed me to check the "MultiFinger Gestures" checkbox, and not actually use mutlFinger gestures. Is this a known problem with this pc/synaptic driver combo. If so, is there a fix? Any help would be appreciated.
E
Build: HP 2740p, i5, 4GB DDR3, Win7 64bit, synaptic touhpad driver version 15.2.7.0 (12/22/2010). Product #: 2CE0330DSH

If you find that it is greyed out, try right clicking the synaptics tray icon in the taskbar and if the option "disable gestures: is ticked, untick it and the options in the touchpad settings should be accessable.
Hope this helps

Changing Win7 64bit to 32 bit on Satellite Pro C660-16N

Hello.
>...Satellite Pro C660-16N - Windows 7 64bit Home Premium preinstalled...
Does anyone know what the best route is to change Win7 64bit to Win7 32bit. Does this model have a 32bit install option on HDD recovery?
Or will it have to be a clean install from a Win7 32bit DVD.
Many thanks.

I presume this notebook is offered with 64bit version only (specification) and there is only one way to install 32 bit OS version you must install it using original Microsoft Win7 32 bit installation disc.
Please note: for OS activation you cannot use product key from the sticker. You must buy new licence for your own installation.
By the way: check also if this notebook model is supported for 32 bit version. You can do this on Toshiba support and download page under http://eu.computers.toshiba-europe.com
If you have more questions you are welcome.

CS4, Win7 64bit Media Encoder Errors

On a fresh install of Win7 64bit, ASUS P6T Deluxe V2 motherboard 12GB RAM, NVIDIA GTX 260 graphic card and all updates (software/hardware), I'm having a bear of a time exporting even a bars/tone test project from CS4. Here is the sequence of events:
1)Create/edit project, export media, I get warning message that an update of Media Encoder is available (but I've already double checked that I'm running CS4 4.2.1 with multiple computer restarts). AME version I have is 4.2.0.006
2) choose export format, location, etc. (I've tried various export formats with no difference in resulting error messages)
3) dynamic link exports the file to AME...BUT....AME doesn't open
4)When I've manually opened AME beforehand, CS4 will export to the queue
5)On attempt to encode I get the message:
- Source File: C:\Users\Oren\AppData\Local\Temp\Zi8 Test_7.prproj
- Output File: E:\Choco Rehab2.f4v
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:18:29
2/6/2010 9:42:25 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
6) I've looked in the folder and indeed, the source file doesn't exist...but it keeps creating this same message, regardless of what project I try to work on.
I've done a re-install (with cleaner script) TWICE already and it is really a time-killer (especially when I defrag the drive in between installs). I beseech Harm and all the other gurus to offer some sage wisdom. Thank you.

I'm the only user on the computer, and I do have full rights to the C: volume. By default, I should be the administrator, is that correct? Thanks again for your offer to help and your invaluable assistance to all Adobe users. With your help (and the upcoming Mercury engine), I hope to have a Matrox-free system eventually. I still have to use my XP-32 matrox and CS3 system until I can work out the kinks that keep me from exporting completed projects on my newly build Win7 CS4 system.
Let me know if anything stands out to you that I'm missing. I'm a bit frazzled currently.
-Oren

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Does OVS2.2.1 support win7-64bit OS

Hi,
I use OVS2.2.1
And I installed win7 64bit OS VM.
But when create the VM by OVM manager, the drop down list for OS do not have win7 selection.
Then I select windows vista instead.
After win7 OS installed, I installed OVM windows PV Drivers on it.
When I go to storage, the Hard Disk Driver is "Auto", and cannot set it as xvdx.
My question is:
1) Does OVS2.2.1 support win7-64bit OS
2) If not, which patch should I install to support win7.
3) Does xvdx model support win7?
Thanks!

Hi,
yes this are the release notes of OVS 2.2.2. However I can remember that they looked the same for OVS 2.2.1.
PS: If you look in the server user guide under "What's new", you won't find a new entry for Windows 7 with 2.2.2 - which implies it has been supported before.
If you want to be 100% sure, upgrade to OVS 2.2.2.
No - it only means you are not using xvd* devices but hd* / sd* devices. Which is also valid.
However using xvd* devices (together with the PV drivers) is better for performance (I/O-Performance).
Regards
Sebastian

Is Wamp for Win7 64bit good quality?

I just finished migration to a new laptop which involved converting from WIN7 32bit to WIN7 64bit. I went to download the 64bit version of Wamp but the user feedback wasn't very flattering. There was only 1 user comment.
Have others used Wamp 64bit and are there any issues I should be aware of?
Thanks
Tom

Hi Nancy. Glad to see your still active and involved in the forums.
My question was very specific to 64 bit WAMP. I've been very happy with my 32 bit WAMP version. What I want to know is whether to use 64 bit on my new WIN 64 bit laptop?
In my original post I acknowleged that there was only one user comment on WAMP 64 and it wasn't very favorable. One comment is questionable.
Does anyone have experience with WAMP 64 who can help determine whether I should upgrade to 64 it or download 32 bit on my new laptop?
Tom

HP722c install to win7 64bit

Can't get HP722C to install on new Win7 Pro 64bit OS. I saw a long post on HP about a "bridge" but it assumed that the driver was installed and just wouldn't work. I can't even get a driver to install. The CD won't work, driver is not on Win7, and HP won't download it from their site. They tell me it's on Win7, but I have done that dance twice and it ain't there! Anybody smarter than me know how to make this 722C work on Win7 64bit? Now tell me simply and slowly, I'm over 65!
This question was solved.
View Solution.

[Please DO NOT post multiple posts on the same subject. As I composed this message I note you posted three more requests for the same information....]
There are actually three separate issues that will need to be addressed:
Most Windows 7 computers do not have parallel ports and the Deskjet 722 only supports a parallel port. There are USB-parallel converters that can be used, but many of these do not support Windows 7. Make sure the converter (if you need one) supports Windows 7. The posts tagged here have models that users have reported success with in Windows 7. The port you select will depend on the model you have, the port will typically be USB001: or USB002:.
The driver is delivered through Windows Update. Lately this has been having an issue with the update failing. To check this do the following: click Start, Devices and Printers, Add a Printer, Local Port, LPt1: (for now), Next, click on Windows Update and wait for the list to repopulate. If you get an error "Windows was unable to get a list..." then see the post here for a workaround. Once Windows Update has completed and the list is repopulated select HP Deskjet 720, Next, Next, Finish. (Do not print a test page at this point.) You can now connect the printer cable, then right click on the Deskjet 720, Printer Properties, Ports and select the proper port. [I have no way to know what the port will be for your system. Look for a USBnnn: port or check with the documentation for your converter cable.] Once this has completed and the printer shows up in the Devices and Printers folder you can continue to the next step.
Next apply the patch available here that resolves this issue of the spooler crashing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

C1 on Win7-64Bit and snapins

Hi there,
i have just switched to Win7-64Bit.
Now, how i get C1 running with ALL snapins (i need the Zen7 management
snapin) !!
MayBe someone can help me plaese !!
Regards
Thorsten

Definitely not supported, since that tool just calls to the unsupported
Novell Snapins.
Definitely a Virtual PC or Terminal Connection to a Supported OS.
On 10/29/2010 7:39 AM, Thorsten Grund wrote:
> do you think this http://www.hdopp.de/software/S-ZENworksBrowser.html is
> working ?
>
>
>
>
>>>> smflood<[email protected]> 29.10.2010 12:06>>>
>
> Thorsten Grund;2039244 Wrote:
>> i have just switched to Win7‑64Bit.
>> Now, how i get C1 running with ALL snapins (i need the Zen7 management
>> snapin) !!
>>
>> MayBe someone can help me plaese !!
>
> The only version of ConsoleOne supported on Windows 7 is the version
> included with GroupWise 8 Support Pack 1 or later.
>
> As such it is only supported for managing GroupWise objects and I don't
> know whether the ZEN 7 plugins would work.
>
> I suspect you would be better offer creating a virtual machine (using
> VirtualBox or VMware Player) to run Windows XP as a guest OS for using
> ConsoleOne to manage your ZEN 7 objects.
>
> HTH.
>
>
> ‑‑
> Simon
> Novell Knowledge Partner (NKP)
>
> ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑�
> ��‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑‑�
> �‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑
> Do you work with Novell technologies at a university, college or
> school?
> If so, your campus could benefit from joining the Novell Technology
> Transfer Partners (TTP) group. See www.novell.com/ttp for more
> details.
> ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑�
> ��‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑‑�
> �‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑
> ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑�
> ��‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑‑�
> �‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑
> smflood's Profile: http://forums.novell.com/member.php?userid=617
> View this thread: http://forums.novell.com/showthread.php?t=424666
>
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Why i can't setup itune on win7(64bit) ?

I can't setup the itune on the win7(64bit),
it always show that i need to uninstall and use the i tunes for 64bits when i connet the i phone with my PC
i have check that the version is itune64bits version for sure,
plz help me to solve the problem,thx!

Uninstall iTunes and all of its components by following this guide: http://support.apple.com/kb/HT1923. You must follow this guide exactly or it will not be successful. (Uninstalling iTunes only removes the application; it won't trouch your iTunes library or data.) Then reinstall the latest version of 64-bit iTunes.

I need driver for Pavilion 15 n204tx win7 64bit

Hi,
I need driver for HP Pavilion 15 n204tx Notebook PC with NVIDIA GEFORCE graphic card win7 64bit.
3D Video Controller
PC\VEN_10DE&DEV_1292&SUBSYS_2166103C&REV_A1
PC\VEN_10DE&DEV_1292&SUBSYS_2166103C
PC\VEN_10DE&DEV_1292&CC_030200
PC\VEN_10DE&DEV_1292&CC_0302
Ethernet Controller
PC\VEN_10EC&DEV_8136&SUBSYS_2166103C&REV_08
PC\VEN_10EC&DEV_8136&SUBSYS_2166103C
PC\VEN_10EC&DEV_8136&CC_020000
PC\VEN_10EC&DEV_8136&CC_0200
PCI Device
PC\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01
PC\VEN_10EC&DEV_5227&SUBSYS_2166103C
PC\VEN_10EC&DEV_5227&CC_FF0000
PC\VEN_10EC&DEV_5227&CC_FF00
PCI Simple communications Controller
PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C&REV_04
PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C
PC\VEN_8086&DEV_9C3A&CC_078000
PC\VEN_8086&DEV_9C3A&CC_0780
SM Bus Controller
PC\VEN_8086&DEV_9C22&SUBSYS_2166103C&REV_04
PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C
PC\VEN_8086&DEV_9C3A&CC_0C0500
PC\VEN_8086&DEV_9C3A&CC_0C05
Universal Serial Bus (USB) Controller
PC\VEN_8086&DEV_9C31&SUBSYS_2166103C&REV_04
PC\VEN_8086&DEV_9C22&SUBSYS_2166103C
PC\VEN_8086&DEV_9C22&CC_0C0330
PC\VEN_8086&DEV_9C22&CC_0C03
Unknown device
ACP\HPQ6007
*HPQ6007
NVIDIA GEFORCE graphic card
Regards,
Sachin

Hi,
Your machine only supports Windows 8. BUT please try for W7:
HP 3D DriveGuard Software (ACP\HPQ6007):
http://ftp.hp.com/pub/softpaq/sp61001-61500/sp61291.exe
Ethernet Controller (PC\VEN_10EC&DEV_8136&SUBSYS_2166103C&REV_08)
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44990.exe
PCI Device card reader (PC\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01):
http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52186.exe
PCI Simple communications Controller (PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C&REV_04):
http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46507.exe
SM Bus Controller (PC\VEN_8086&DEV_9C22&SUBSYS_2166103C&REV_04)
http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52791.exe
Universal Serial Bus (USB) Controller (PC\VEN_8086&DEV_9C31&SUBSYS_2166103C&REV_04)
Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
3D: You need to install Nvidia driner to fix this. You can get autodetect:
http://www.nvidia.com/Download/Scan.aspx?lang=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

X200s Win7 64Bit 4GB only 3GB usable

Similar Messages

Maybe you are looking for