X200t screen flickers when mouse moves off the right screen edge in secondary landscape orientation

I just got my 1st  lenovo tablet pc (x200t multi-touch w7 32bit). However, my first experience is not so smooth.
I am having a screen flicker issue in secondary landscape mode (not the default landscape mode) whenever I move my mouse beyond the right edge of the screen. From the symptom,  it seems like Windows 7 didn't stop the mouse from moving out of the screen, and hence  Windows 7 tries to redraw everything from the top up to the cursor repeatitively (i.e. flickering)
In other orientation, the mouse is actually stopped before moving out of the screen because I can still see the edge of the cursor when I move to far right. 
Does anyone know of a solution?  If not, I would like to know if anyone else experience this issue. You can reproduce this by
1. rotation the screen orientation until buttons on the screen is at the top of the screen (i.e. the secondary landscape orientation)
2. move your move beyond the right edge of the screen.
3. screen starts to flicker
I have updated all the drivers and software via Windows Update and Lenovo ThinkVantage.
ThinkPad BIOS Update 3.11-1.04
ThinkPad Power Manager 2.05
Lenovo Fingerprint Software for Windows 7 32 bit 3.3.0.58
Lenovo thinkVantage Toolbox (32-bit) 6.0.5449.31
Here is my configuration 
Intel Core 2 Duo SL9400 (1.86GHz, 6MB L2, 1066MHz)1
Genuine Windows 7 Professional 3212
12.1" Enhanced Multitouch WXGA LED Panel with Wide viewing Angle
Intel Graphics Media Accelerator 4500MHD
2 GB PC3-8500 DDR3 SDRAM 1067MHz SODIMM Memory (1 DIMM)8
TrackPoint
160GB Hard Disk Drive, 5400rpm4
Integrated Bluetooth PAN
Intel WiFi Link 5100 (AGN) with My WiFi Technology10
Integrated Mobile Broadband - Upgradable65
ThinkPad X200 Tablet 4 Cell Li-Ion Battery60
7448: 1 Year Depot Warranty - TopSeller7
Thanks

Could you be a little more specific?  I took that section out of my CSS file but the problem persists.
Thank you.
Sincerely,
Michael Yannetta
Mio Web Designs
530-414-3313
[email protected]

Similar Messages

  • Cartridge holder makes a sound like a machine gun when it moves to the right just before printing

    Product is HP Deskjet 4440 all in one.  OS is Windows XP.  
    When the cartridge holder goes clear to the right just before printing it makes a loud noise like a machine gun just before it starts printing.  It prints fine.  But sounds like the cartridge holder is sticking and makes this machine gun like sound.

    Hi @gramdeb, 
    I see by your post that the carriage makes a loud noise when it moves to the right, but you can still print. I can help you with this.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Remove and reinsert the cartridges, to make sure that they are correctly installed in the unit.
    I have provided this document for different areas of the printer to check for any obstructions or broken parts in the carriage path. 'Paper Jam' Message Displays on the Computer. Disregard the title.
    Did you just change out any of the cartridges?
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word and Pages.  Any idea of how to resolve this annoying problem is appreciated.  System: 10.10.1

    When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word 2011 and Pages.  Any idea of how to solve this annoying problem will be much appreciated.  System 10.10.1 on a MacPro (Late 2013)

    The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
    Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
         https://www.youtube.com/watch?v=ZNQ0D84DdF4
    What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

    I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
    In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
    In the page class I triggered the event for WM_MOUSEMOVE as follow:
        MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
    LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
    if(TRUE == m_bIsNextBtnClicked)
    ::SetCursor(LoadCursor(NULL, IDC_WAIT));
    else
    ::SetCursor(LoadCursor(NULL, IDC_ARROW));
    return TRUE;
    This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area,  but
    this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
    LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
    ::SetCursor(LoadCursor(NULL, IDC_ARROW));
    return TRUE;
    Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e., 
     `::SetCursor(LoadCursor(NULL, IDC_WAIT));` . 
    Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e., 
        ::SetCursor(LoadCursor(NULL, IDC_ARROW)); 
    When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
    MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
    LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
    ::SetCursor(LoadCursor(NULL, IDC_ARROW));
    return 0;
    This event is not getting triggered until unless the function in the Next button event is executed.
    I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
    LRESULT OnWizardNext()
    ::SetCursor(LoadCursor(NULL, IDC_WAIT));
    m_bIsNextBtnIsClicked = TRUE;
    BOOL bRet = MyFun();
    m_bIsNextBtnIsClicked = FALSE;
    //Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
    //event is not getting triggered.But this event should get triggered and I
    //should be able to see the change of cursor within and out of client area.
    Can anyone kindly help me to solve this issue.
    SivaV

    Hello
    sivavuyyuru,
    For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Download error when renting a movie off the iTunes store app

    Hi, I tried to rent a movie off the iTunes store app today(I have rented before with no problems), but when it was in the processing stage it started saying Download error. Tap to retry. Now its taken up 1.3 gigs of space but it never finish processing so its not there. Very frustrating and i cant fix it.

    Apple Tech support doesn't respond here. This is a user-to-user forum.
    You can always restore your Touch to get the memory back. And as, of course, you have everything properly backed up (you do, right?), you can just reload when you're done. I don't know as there is a faster solution.
    Best of luck.

  • When I turn off the phone, the screen flashes with sony logo. any solution?

    Hi,
    when I turn off the phone, the screen flashes with sony logo. any solution?

    repair your phone with
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • When I boot Firefox on my laptop it quickly walks off the right side of the monitor and I cannot interact with the screen, even to pull it back onto the screen

    When I boot Firefox the initial screen comes up but it queickly 'walks' off the right side of the desktop screen, and I cannot locate it to bring it back into view. I recently added a graphics projector and had to change my display values so that the computer would output to the projector. Do I need to change something back. This only happens with Firefox.
    == This happened ==
    Every time Firefox opened
    == I change my display seetings to enable a graphics projector. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

    looks like it is not the problem with firefox, ask your husband. through my experience of using firefox there is no poof-off stuff.

  • When-Mouse-Move PJC/Bean

    Does Oracle/OTN have any intention of providing a PJC/Bean sample that replaces the when-mouse-move trigger functionality? It would be nice to start using drag and drop again. I have not yet learnt Java so I can't write one myself.

    Hi,
    I've built a PJC that sends when_mouse_enter,exit,move events but that's not a aproach for the drag and drop functionality,because it takes a lot of time to send the event to the web server,and receive the coresponding actions to perform..
    I've embedded the old PL/SQL code for drag and drop into JAVA directly,and the drag and drop works fine...
    However ,problems raises when you have a big load into the parent canvas(many items)...the draging item is flickering up and down when dragging it over others UI conponents...I'm using JInitiator 1.3.1.9
    Any ideas why?

  • Adobe pro 9 changes printers when mouse moves over printer window

    When trying to print an adobe document, the default printer is ignored and the selected printer changes as the mouse moves across the printer window to reach the print button, making it difficult to stabilize the printer selection. Please advise

    I have now checked other people in my departments Adobe versions.
    I have Adobe Pro V9.0.0, and does not print correctly.
    1 person has Adobe XI Pro and prints correctly.
    1 person has Adobe Pro 9.5.5 and prints correctly.
    1 person has Adobe Pro V9.0.0 and does not print correctly
    I have now installed the available upgrades which only took me to 9.2.0 and still prints incorrectly.
    I wil try and find the other updates and see if that helps.
    thx.

  • How to display item when mouse moves over Column value??

    Hi there
    It would be helpful if you could resolve the following :
    i) I need to display the column 'A' values of my report in a Text field when mouse moves over column B of my report.
    ii) I can able to display the same column value when mouse moves over or onclick happens. but my requirement is something like i have to display the other column value when mouse moves over.
    iii) Also i noticed that, i can able to display the item only on "Display only Item" and not on Text field.
    Any pointers to display my column value in Text field when onclick happens on my report column?
    iv) One more thing that i noticed, i can able to perform onclick or mouse over only on Editable column and not on
    non editable columns.
    Any pointers on how to achieve the same when mouse moves over Non editable column of report?
    Reference: I have created a dummy application (refer the following link), where i can able to display column value Salary on display only item using mouse move Event.
    My requirement: when i click column Ename , the text field should show salary.
    http://apex.oracle.com/pls/otn/f?p=56045:1
    User:guest
    Pswd: apex_demo
    Any pointers on this would be appreciated.
    Thanks
    Vijay

    Vijay,
    If you use Jquery then this should do the trick.
    $(document).ready(function() {
       $(".t20Report t20Standard tr").hover(function() {
         $("#P2_SALARY").attr("innerHTML",$(this).find("td:last input").attr("value"));
    {code}
    after looking at the source of your page it seems that your class for your report region is *class="t20Report t20Standard"* I am not 100% sure but you might have to correct that in the template. I am not sure how the selector will handle the space in the class name.
    Hope this helps,
    Tyson                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How control can be customized so that it changes its picture when mouse moves over it

    How control can be customized so that it changes its picture when mouse moves over it. As it happens in other develpment enviroments that one can customized the look 'n feel of any thing during the mouse movement over that very thing. Moreover can any body plz tell me that how one can modify the funtionality of a control by him self (not selecting the available functionalities of controls and indicators)

    The attached LV 7.1 code uses an event configured to trigger on two controls when a "Mouse Enter" or a Mouse Leave" event occurs. Depending on the type key focus is either assigned or removed.
    Please elaborate on the Q re: customizing a control.
    Ben
    PS Do NOT change the boolean to an indicator, save, run, change to control, save run again. That is bad.
    Forgot to attachMessage Edited by Ben on 05-05-2005 09:30 PM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction
    Attachments:
    MouseOver.vi ‏28 KB

  • Mouse Move on the column Chart

    Hi all visitors
    I have created one crystal report and in my report i have created one column chart.
    but i don't show the value on the column chart,however, when i move mouse on that column chart,
    it will show the value.but in crystal report server,when i move the mouse on the column, it doesn't show the value like crystal report.
    Anyone know about this how to show the value on the column when mouse move in crystal report server?
    Please help me for this.
    Best Regards,

    Unfortunate Tool tip doesn't work with CR Charts.
    Probably there may be some  trick that will configure to achieve. But I didn't came across till now.

  • I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

    I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

    Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

Maybe you are looking for