X201 - Error Code 0000: Read Verification Failed

Hi All
for the last 2 weeks i have seen a rise in X201 laptops with "Error Code 0000: Read Verification Failed" we have about 500 of these laptops in the comapany, we started roling them out about a year ago and now we are getting about 10 a week come back with this error message.
is anyone else getting this error? is this a design fault with the hard drive? any info would be good
Thanks
Paul

I have replaced HD's on two of these for clients. On one I was able to run DFT to check it and clone the recovery partition with Acronis. The other one I could do nothing with.
Grand Rapids computer repair and virus removal

Similar Messages

Help!!! T61 Blue Screen--unmountable boot volume-- error code 0000: Read verification failed

My computer is T61 (8891CT), but Blue Screen came out and reported--unmountable boot volume. I ran the diagnostic program and got the error code 0000: Read verification failed. I can’t run anything now including the restore and rescue. Has the hard drive died?
If the hard drive has died, I have to change the hard drive, but how to transfer the system (I don’t have any CD) and think vantage software? Thank you very much for you help.

Hi equalefk,
Yes, definitely sounds like it's time to replace the HDD.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

X 100e ERROR CODE 0000: READ VERIFICATION FALEID

recently bought a notebook X100e nothing appears when I turn, I entered the setup and asked for an analysis on the hard drive and appeared the following: ERROR CODE 0000: READ VERIFICATION FAILED.
I wonder how do I solve this problem.
Solved!
Go to Solution.

Welcome to the forum!
Your hard drive is failing. Contact Lenovo for a replacement, presuming the machine is still under warranty.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Error occured while reading identity data: failed to decrypt safe contents

Hello,
We are trying to access Tibco JMS server through SSL using JNDI lookup. Getting the following error, while executing a sample java file.
Java Version -
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Please let me know if any of you faced similar issues.
thanks in advace.
Following are the error messages.
javax.jms.JMSSecurityException: Error occured while reading identity data: failed to de
crypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid
pad byte. at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2699)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
##### Linked Exception:
com.tibco.security.AXSecurityException: failed to decrypt safe contents entryCOM.rsa.js
afe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:70)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source) at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source)
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more

For the benifit of others.
The issue is resolved.
When we set the certificate password inside our application we were encrypting it inside our system.
When we sent it to tibco we did not decrypt it.
So the encrypted password was sent as it is that was the issue :(
Thanks,
Reflex.

What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?

ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne

Error code 9050 "disk_not_accessible" 20017,RestartFilesystem failed with '

I am getting the error shown below in my livecache on a Linux server:
KERNEL    7.7.07   BUILD 020-123-236-782
DBMServer 7.7.07   Build 020-123-236-782
These is the error from DBMgui:
-11-28 16:19:27     RTEIO          8: attach volume DATA_VOLUME_0009 on /sapdb/LMS/data9/DISKD0009,VOLUME_NO=9
                                                                      DESCRIPTION:
                                                                      The volume of the type DATA_VOLUME_0009 with the logical number 9 and the path of /sapdb/LMS/data9/DISKD0009 is being attached.
Thread 0x18F Task    160 2011-11-28 16:19:27     RTEIO         10: volume DATA_VOLUME_0010 has identification 11,VOLUME_NO=10
                                                                      DESCRIPTION:
                                                                      The volume DATA_VOLUME_0010 with the logical volume number 10 is identified by 11.
                           2011-11-28 16:19:27     RTEIO          8: attach volume DATA_VOLUME_0010 on /sapdb/LMS/data10/DISKD0010,VOLUME_NO=10
                                                                      DESCRIPTION:
                                                                      The volume of the type DATA_VOLUME_0010 with the logical number 10 and the path of /sapdb/LMS/data10/DISKD0010 is being attached.
Thread 0x18F Task    160 2011-11-28 16:19:27 ERR RTEIO         12: attach of volume DATA_VOLUME_0011 failed during open,VOLUME_NO=11,_FILE=RTEIO_VolumeInfo-k+noPIC.cpp,_LINE=1744
                                                                      DESCRIPTION:
                                                                      An error accurred when trying to add the volume DATA_VOLUME_0011 with the logical number 11 to the configuration and physically attach it.
                                                                      ACTION:
                                                                      Contact your system administrator. Show him the error message which points to an operating system configuration error and then contact the database support if your system administrator can not fix the error.
                           2011-11-28 16:19:27 ERR RTEIO          1: The opening of path '/sapdb/LMS/data11/DISKD0011' failed,DESCRIPTION=open(READWRITE,OPEN_EXISTING),ERRORTEXT=No such file or directory,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k+noPIC.cpp,_LINE=2385
                                                                      DESCRIPTION:
                                                                      An attempt to open the path '/sapdb/LMS/data11/DISKD0011' failed. The operating system returned the error code 2 and the error text 'No such file or directory'.
[root@ushpwbmsclz005 ~]# cd /sapdb/LMS
[root@ushpwbmsclz005 LMS]# ll
total 70
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data1
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data10
drwxr-xr-x   2 root root 1024 Jun 10 2009 data11
drwxr-xr-x   2 root root 1024 Jun 10 2009 data12
drwxr-xr-x   2 root root 1024 Jun 10 2009 data13
drwxr-xr-x   2 root root 1024 Jun 10 2009 data14
drwxr-xr-x   2 root root 1024 Jun 10 2009 data15
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data16
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data17
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data18
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data19
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data2
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data20
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data3
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data4
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data5
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data6
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data7
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data8
drwxr-xr-x   3 sdb sdba 4096 Jun 16 2009 data9
dr-xr-xr-x 12 sdb sdba 1024 Jun 16 2009 db
drwxrwxr-x   3 sdb sdba 4096 Nov 28 14:54 log
I really need some help.
thanks,
Jose

ok.
I have a backup before.
I used DBM GUI to recovery with initilalization , now DB is OK.

Error Code 2300 on Restore after failed Os4 upgrade.

Pretty simple. Attempted to upgrade to the new Os4 with a 2nd gen iPod touch. For whatever reason, iTunes recognizes it, but the update failed which sent it into recovery mode. After 6 attempts at a restore, error code 2300 doesn't fail to pop up while preparing the iPod for restore. I've also tried 3 different USB ports- aiming for different computers later in the day. I don't want to have to invest money into a newer iPod - even though this one is 1 1/2-2 years old just about. Thankfully music is on the computer happily waiting to be loaded back in - so the only issue is getting the iPod itself to restore or SOMETHING. Paper weight - no thanks.
Any help is appreciated.
-Mare.

I have the same issue. from what i've gathered the issue is with the data transfer via usb
try a different computer

Error Code 88709 Reading NI USB-6225 OEM

We have an issue that exists on one of two nearly identical systems that use NI USB-6225 OEM cards. We are reading 75 channels at 1 kHz once per second. On one of two systems the Error Code -88079 occurs intermittantly and when this happens the DAQ measurements stop though the code does not freeze. We do not write to the 6225 card, the only thing we are doing is reading the AI channels.
Our LabVIEW version is 2013 SP1 f2 and NI-DAQmx is version 14.1. NI MAX is v14.0.0f0.
The first system runs on a Windows 7 desktop workstation and has serial mass flow controller software with timers to change flow and concentrations based on a control file as well as a MODBUS TCP NDIR interface. This system is complex but works perfectly.
The second system runs on a Windows 8 laptop. The mass flow software, timers, and NDIR interface were removed from the code of the first system to simplify the software for the second system.
It is only the second system that produces the Error Code -88079. This can happen once a month or several times a day.
I've removed all the 'bloatware' from the Windows 8 laptop and ensured that nothing is set to hybernate or sleep and also turned off the Windows and other automatic updates because these systems must run 24/7 for a year.
So, what is the best resolution for the Error Code -88079 problem with the second system?
The DAQ card was calibrated and tested ISO-17025 through NI by an independant agency so it is not likely to be faulty but we could replace it with another (not ISO-17025) card we have on hand for diagnosis
The USB cable is a possibility. We could obtain a high quality USB cable and make sure the ends fit tightly. Disconnecting the USB cable when the code is running produces Error Code -88079...
Any other suggestions?
Warm Regards,
Lloyd

Hi Saturn233207,
Could you give more detail about the error that you are getting? What are the steps to reproduce the error? Is there any descriptive text at all in the error dialog box - maybe post a screenshot of the error?
Also, as you mentioned I believe it would be a good idea to ensure that you are using a quality USB cable.

(null) Error: 1648 - Adobe Reader Updater - Update failed

Help! Adobe Reader "refuses" to be uninstalled!
10.22.13 Tu
Popped-up error message when attempting to install/upgrade Adobe Reader to version XI.
10.24.13 Th
When I first started the PC in the morning, I clicked on the icon that prompted me to update Adobe Reader:
When I clicked on “Details”, the following webpage opened:
http://helpx.adobe.com/acrobat/kb/update-errors-acrobat-reader-windows.html

I think your Reader installation is corrupted.
Suggest to remove it using Cleaner tool - search this forum for the link, it is posted all the time.
After cleanup install latest Reader from Adobe.com

HT2674 error code 0000

My machine started freezing and loading very slowly. I replaced the hard drive. Then it started this brief freeze and coding as if rebooting would begin, but then it would freeze. If I turned the laptop off then back on it would reboot and run for about an hour, then repeat the process. Thought the new drive was a dud and replaced it with a different brand. Instantly the process started again (didn't even get Snow Leopard updated enough for Lion this time). Thinking my baby is having a mother board issue instead of hard drive. Is this the correct thought or do I have a simplier, less deadly problem?

gryphon410, welcome to the forum,
what you are experiencing doesn't sound good
Is your hard drive visible in BIOS? Press F1 at start and navigate to Startup > Boot to see if the hard drive is listed. BIOS simulator can be found here.
You should certainly try reseating the drive, it may have vibrated loose during transport, might help. Otherwise putting the drive in an external caddy attached to another system may help you get your files. Depending on the condition of the drive it is sometimes easier to get the files using a Linux cd, (e.g. Knoppix), rather than using windows. Instructions on how to remove / replace your hard drive can be found here.
You may also, after getting your files off, like to try Hitachi Drive Fitness Test to check the integrity of the drive. Even if you don't have an Hitachi drive it will tell youwhether or not it is good or bad.
Hope this helps, and I wish you luck
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Since changing to Firefox as my internet browser I cannot use Dell Datasafe Online to back up my PC. I get an error code BuEng_2816 Internet DNS lookup failed for'{1}'

It suggests I check my Internet connection and/or my Internet Security settings. I cannot see how to do this on Firefox.

{Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
http://kb.mozillazine.org/Problems_printing_web_pages

Dropped T410 HDD error msg 0000

Hi All.. grrr.. i dropped my beloved T410 (never had any issues with since i bought it) model number 2522w55, while it was turning on. Ran HDD diag. prg n got msg Error code 0000 Read Verification failed. Questions:
1. Does error msg confirm that indeed the hard drive is corrupted or coudl it be something esle? FYI i tried reseating the drive n diag still same error msg.
2. I need the files on hard dirve any easy way to get them back? Idiot that i am, of course, when it rains it pours didnt back up all files.
3. If i need to buy new hard dirve which one does Lenovo ppl recommend? Out of work now so cant buy new lappy gotta slavage what i can.
So distraught...THANKS FOR YOUR HELP PPL

Another thing you might try is booting a live Ubuntu Linux CD or flash drive and see if it can access your files.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

OBIA 7.9.5 "Financial Analytics" GL/AR Fact load fails "error code 36331"

Hi all ,
For Financial analytics7.9.5 below fact load getting failed "error code 36331".
'SIL_GLOtherFact_Full' has failed.
'SIL_GLCOGSFact_Full' has failed.
'SIL_GLRevenueFact_Full' has failed.
'SIL_ARTransactionFact_Full' has failed.
Let us know how to fix this up.
Should i need to follow the comments posted in this link
Re: Help !!! Re: Fianacial Analytics failed with Error Code = 36331
thanks
saran

ORA-12520: TNS:listener could not find available handler for requested type of serverI've not seen this error myself, but looking on Google it appears to be an unsolved problem on OBIA.
Since it's intermittent then it rules out obvious things like the Oracle database being down or the connectivity being incorrectly configured.
Looking on My Oracle Support (metalink) I found discussion of the error with reference to a completely different product but around the issue of parallelism.
If I had to guess I'd say that the keyword in the error is available - the oracle DB is being swamped with more requests that its configured to handle.
My suggestion would be speak to your DBAs and ask them to monitor the number of sessions on Oracle DB whilst your ETL is running and watch for any limit being breached. If possible up that limit, or reduce the amount of ETL tasks running in parallel.
I'd also suggest raising an SR with Oracle since it's evidently a not-uncommon problem.

Read BootROM Error Codes over JTAG

I am laying out a custom board with the zynq, 7z045ffg900.
I am trying to boot from SD, but this appears to be failing. From reading chapter 6 of ug585, I noticed that there are BootROM Error Codes to help debug. From using an osciliscope the reset signals are being de-asserted at the correct time. For a first go around I am not loading a bitstream.
The JTAG cable does recongnize the 7z045ffg900, and I am able to read the temperature and voltages from the XADC through the Vivado HW Manager. But how do I read the BootROM Error Codes?
Regards,
Chad

I am having the same issue; am unable to boot from SD card; the zynq TRM says:
> JTAG access to error code register read:
° When JTAG is enabled, the DAP controller can be used to read the error code in the
slcr.REBOOT_STATUS [BOOTROM_ERROR_CODE] register field.
how exactly does one read this register? is it through a tcl command in vivado?
can someone post detailed instructions?

X201 - Error Code 0000: Read Verificati​on Failed

Similar Messages

Maybe you are looking for

X201 - Error Code 0000: Read Verification Failed