X201 - how to use the port replicator??

Hi,
I've just received my x201 with the dockingstation. Monitor and speakers are connected to dockingstation and everything works fine.
But, I cannot use the builtin dvd player or any of the USB ports on the dock, what do I need to do to get these working?
Thanks in advance,
Mattias

Yes, the ultrabase. I'm using windows 7.
When I open my computer I don't see the DVD. Nothing happens when I plug something into the USB ports. The light above the DVD is green.
What am I doing wrong?

Similar Messages

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to hide the PORT NUMBER from the URL

Hi,
We have Application on Node 1 and Database on Node 2
Apps Version: 11.5.10.2
DB: 9.2.0.6
We recently added a new node to act as web server for iSupport.
Now we are able to access the url using public Ip-address which looks like
http://<Internet Ip-Address>:<PORT NUMBER>
Eg: http://******.com:8000
But we dont want the *'PORT NUMBER(8000)'* to be displayed.
How to hide the port number ?..
Thanks in Advance,
Mahesh

Hi Hsawwan,
Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
Regards,
Mahesh

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

How to use the Firewall

Can someone please explain how to use the Leopard firewall? The previous one was obvious, in that there was a list of options you could select to choose, such as iChat etc. That has all gone and I'm concerned my computer is not protected. I'm not even sure whether the firewall is on or off.
Thanks
Phil

I read that too... Here's a way to figure this out : Don't set the firewall up. Go to Hackerwatch. You can choose *Simple Probe* at first
Then, set up your firewall as described in this thread and relaunch Hackerwatch : *Simple Probe* and *Port Scan* if you have some time to loose I found that the security isn't that bad at all... And it's better than nothing before Apple's recomandation and/or update.
MAX

How to use the Bloggie camera with Apple iMovie software.

Solved!
Go to Solution.

Follow these steps to use the Bloggie® camera with the Apple® iMovie® program.
Power on the camera and connect directly to a USB port on the computer.
Once the camera is detected by your computer, the iMovie software should open automatically. If the iMovie software does not open automatically, go to the Applicationsfolder and open it from there.
In the iMovie window, choose Import from Camera...
Choose which clips you want to import and choose the Done button or choose the Import All...button to import all the clips.
NOTE: You can use the standard iMovie interface to edit and create movies from your video taken with the camera. For more information about how to use the iMovie program, refer to the Help menu in iMovie or visit http://www.apple.com/support/imovie.

How to detect the Port Number of apex : localhost:????

Dear firends,
I install APEX 3.0 on oracle 10g release 2.
How to detect the Port Number of apex to acces it ? (localhost:????)
regards
siyavuş

Have you installed the Oracle HTTP(OHS) server yet ? If you have then the HTTP config file should specify what port the HTTP server listens at. This port is the port number you use to access APEX

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!

Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done

X201 - how to use the port replicator??

Similar Messages

Maybe you are looking for