X201 ThinkLight not working hardware/build issue

Hi,
the ThinkLight has stopped working on my x201.
This is a hardware issue as if I pinch the top of the screen the light turns on.
The laptop is still under warranty so should I send it back or is this something I could fix myself?
thanks
Matt

A hardware issue. Given the age of your machine it should be within warranty and therefore you should let lenovo warranty deal with it.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Touch screen on tablet not working - Vista driver issue (self-inflicted)

I recently tried to update some drivers on my HP tx1220us tablet computer using some 3rd party software. Long story short, I messed up the driver to the tablet touch screen. When I try to Calibrate , it says tablet hardware not found. I know it's not a hardware issue because the pc dual-boots and the other O/S side (Win7) works fine. Which driver is the Vista driver for the digitizer hardware? Thanks for any help.
Mike L

Did you try installing the Touch Driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&product=3752245&lang=en
Driver
Date
Version
Previous
Size
» NextWindow Multi-Touch Device Driver Update
11-2009
1.3.0.2
2.83M

Program does not work after build

Hi,
I have built a program today that builds fine (no errors or warnings) but it fails when running the exe. I am using drivers for a spectrum analyzer (Rohde & Schwarz FSG) and when one of these drivers is called, it returns an error. Other drivers are run before this particular vi. Anyone have any idea how to troubleshoot this? I'm going to try and build the vi on its own and see if it works. In the mean time, if anyone has any suggestions, please let me know.
UPDATE: I built the file on its own and it still does not work. Again, when I run it in developer mode, it works fine.
VISA Write in rsspecan_core_write.vi->rsspecan_core_attribute_write_int.vi:3->subrsspecan_core_attribute_express.vi:2->rsspecan Configure Averaging Type.vi:Instance:Instance 1 41Saved rsspecan Configure Averaging Type .vi:1->rsspecan Configure Averaging Type.vi
Thanks.

I've decided to post the vi since it is free to download. If anyone has an FSG and wants to build this file and see if they can run it, please do so.
Attachments:
rsspecan Configure Averaging Type.vi ‏31 KB

MS office report function does not work after building the appication

I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
I use office 2000 and Windows XP

jmq wrote:
I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
What error message if any did you get? It could be a couple things:
1. Did you include the Report Toolkit's dynamic vis in the app's build process?
Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Video is not working with build in camera - HP 856...

Hello,
the video is not working since Skype 6.3
I have HP 8560p with Windows 7 32bit
Also Skype 6.6 is not able to see build in camera.
All the drivers are updated.
Do you have any solution for that?
J.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Info on all installed devices should be available in this file.
Be aware that you will have to zip this file before attaching it here.

.jar not working when building project with netbeans plugin and log4j

hey..
subject tells everything..if i build my project referencing log4j, i get a .jar file with 280 kb which is executable
if i add log4j and do some logging, code still works in netbeans, but buildung produces a .jar with 80 kb and an
attached lib-folder with the log4j.jar in it..if i uncheck copy requested libraries, i just get the 80 kb .jar file which
is not working
any hints?

Are you building the jar file using the fxdeploy ant task to build the Jar? That is required to have an executable jar file.
Also there was a change to the netbeans project structure, which may be a contributing factor.
Things to try: Upgrade to the latest netbeans 7.1 beta build, set up a new Java platform in nb that includes JavaFX, create a new JavaFX project and build it. This should produce an executable jar.

DragAcceptFiles Working in Windows 10 TP build 9926 But Not Working In build 10049 and build 10061

This is a cross post from
https://social.technet.microsoft.com/Forums/en-US/a63519d4-ba7a-46c1-bb34-ad034b836964/dragacceptfiles-working-in-9926-but-not-working-in-10049-and-10061?forum=WinPreview2014General. The moderator suggested I post this here:
My company has a software product that accepts dragged items. In all versions of Windows from XP through Windows 10 build 9926 that functionality has worked fine. However, with build 10049 (possibly 10041 which I did not test thoroughly before going
to 10049) and now 10061 that functionality stopped working. The application calls DragAcceptFiles to enable drag drop messages. In addition, either ChangeWindowMessageFilter is called on Vista or ChangeWindowMessageFilterEx is called on Windows
7 and higher for the messages WM_DROPFILES, WM_COPYDATA, and WM_COPYGLOBALDATA. This was working fine on Windows 10 build 9926. Now when I attempt to drag an item to our software product, I get the "Don't" symbol (circle with line through
it) and no WM_DROPFILES messages are received. The application is unchanged with only an upgrade to the Windows 10 build performed. As a sanity check, I created a brand new VM running build 9926 and the functionality worked fine. I then upgraded
the VM to 10049 and it stopped working. The following day I upgraded to 10061 and it is still broken. Is there are new filter or restriction in place since build 9926 on DragAcceptFiles that would be stopping the traditional drag drop procedure
from working? This is very frustrating because there is a dearth of information on Windows 10 API changes and since this appears to be some kind of recent change, I am out of ideas of where to look for answers. I can duplicate this problem on the older
platforms by simply calling DragAcceptFiles with the second parameter set to false. In that case, on Windows 7 for example, I will get the "Don't" symbol just I am getting now in the Windows 10 TP with the argument set to true.

DragAcceptFiles is now working again in 10074 so whatever the problem was, it has been fixed.

After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.

Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

Safari is not working something reopen issue pls help

safari is not working pls help

Adware?
1. Use free AdwareMedic to remove adware
    http://www.adwaremedic.com/index.php
   Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
   Once done, quit AdwareMedic.
             or
   Remove the adware manually by following the “HowTo” from Apple.
   http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
    Turn those off and relaunch Safari.
    Turn those on one by one and test.

Safari not working on ipad issue

Safari is not working on ipad but is on my other mobile devices, what could be the problem?

Do this first, and then read Diavonex's post above - and perform those steps as well.
Go to Settings>Safari>Clear History, Cookies and Data.
After you perform all three steps, try Safari again.

Install Updates task not working during Build and Capture in SCCM 2012

Working with a new SCCM 2012 installation.
We are trying to get a Build and Capture TS to install all updates for Win7SP1.
All packages are deployed to DP, build and cap machine is in a collection with all updates deployed to it. Agent installation parameters include "SMSMP" "SMSSLP" parameters. Machine is not being attached to the domain during OS install.
Updates can be pushed to existing domain machines, so obviously the updates themselves are working.
The task sequence works correctly to install the image, but "Install Updates" task just sits there and eventually times out. (No indication of updates being installed.) If this task is working, shouldn't I see a Downloading Updates progress bar, or was that
eliminated from 2012?

Same issue for me except I'm running 2012 R2 my B&C runs forever on Install Software Updates, eventually just rebooting and coming back to the login screen of Windows 7 without ever finishing the Install Updates.
Been working on it litteraly for weeks.
1- Tried adding .Net 4.52 as an application installation thinking maybe it would resolve the issue
2- Tried installing via Run Command Line + DISM all hotfixes that require 2 reboots as per (https://support.microsoft.com/en-us/kb/2894518)
3- Tried to simply REMOVE the same hotfixes from my Software Update Groups alltogether.
4- Injected all applicable software updates through Offline Servicing in the SCCM Console (Schedule Updates) on the Windows 7 DVD wim file. That way my logic was that once it would hit the Software Updates, there would be a lot less to install.
I'm at the point where I had to open a case with Microsoft Premier Support as of yesterday. So, nothing new to report yet. But yes, this is a true pain in the ***.
For the sake of comparison, I am running 4 Update Groups: one containing patches up to 2012. Another one for 2013, 2014 and 2015. I have patches for Windows 7 + Office of all categories except Service Packs.
If someone has any ideas, feel free to chime in.

Twist charm swipes not working and other issues

Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!

Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG

Droid 4 ear speaker will not work / possible software issue

My droid 4's ear speaker has not been working. If I go to make a call, I cannot hear anything unless I put it on speaker phone.
I do not believe this is a hardware issue however because everytime I restart my phone, the ear speaker will work for a couple of calls I make (and sound just fine) and then randomly stop working.
I was wondering if I had any other options before attempting a hard reset. Has anyone else had issues with this and found out what was causing the problem? whether its from a crazy app or from something being disabled?
The only 'trouble shooting' I can find on this websites says to put it into safe mode (which the ear speaker will work in safe mode) and then to start deleting apps to see which one is causing the problem. This seems rather 'clunky' and I'd rather just reset the whole thing if no one has any other suggestions....as it would take me all day to figure out what app is causing the problem...assuming that it even is an app and not something that has somehow been disabled.
Any help/suggestions would be greatly appreciated!
Apps I've DLed:
Flashlight
100filters
Advanced task killer
Aviary
cymera
dictionary
easy battery saver
Facebook
gmail
image shrink lite
instagram
instasize
Lex & Terry
Loops
Maps
Moviefone
redbox
shazam
weather bug

You have to approve their follow request and they in turn have to approve your follow request. Once you both are 'following' each other, you can send a direct message, i.e.,
How To: Direct Message

Built in iSight for Mac Book not working (Hardware related)

I've looked at the "How to troubleshoot iSight" page for the built in cameras, but haven't had any success.
The problem is not Application specific (tried it out with Photo Booth, iMovie, iChat and Address Book.
I haven't tried to see if it's user specific as I'm the only user on my computer, but I have backed up my Hard Disk on an external drive, booted from that, and it still doesn't work (the backup was from several months ago when it did work.) I had been using it yesterday and it worked.
I checked the system profiler, and it does not recognize the iSight.
I followed the instructions for resetting the SMC or PMU for Mac Book/Mac Book Pro (http://docs.info.apple.com/article.html?artnum=303319) and then checked the system profiler again. It still doesn't work.
I think I have a hardware issue that isn't easily solveable, but thought I would post here in case anybody has any more ideas. One thing I did notice however that seemed positive is that the built in microphone still seems to be working. I was under the impression the microphone and iSight were part of the same device, although it seems that may not be the case.

Hi PlentyofPaper654,
You have covered everything. Time for an engineer.
10:54 AM Saturday; January 27, 2007

X201 ThinkLight not working hardware/build issue

Similar Messages

Maybe you are looking for