X201s not properly going to sleep / hibernate / shutdown mode and instead gets piping hot
My 3.5 year old X201s that has been working like a charm has developed a nasty problem:
None of the "normal" methods to get the system to "turn off" seems to be working any longer. The OS (Win7Pro-32bit) does its normal thing during sleep / hibernate / shutdown, the screen eventually goes blank but the system never goes into the appropriate powered down state. The area under the CPU becomes hot and the system is totally unresponsive to Fn button, mouse button, lid opening, power button press.
More specifically:
"Start->Shutdown" or single Power button press results in battery LED solidly lit, no "beep". Systemis unresponsive to subsequent normal power on.
"Fn+F4 Sleep" or Close Lid results in Battery and Moon LED solidly lit, single "beep". System is unresponsive to any subsequent normal wakeup attempts.
"Fn+F4 Hibernate" results in Battery and Power and LED solidly lit, moon blinking, no "beep". System is unresponsive to any subsequent normal wakeup attempts.
In all cases, I have to press and hold the power button for 5 sec (at which point all LEDs turn off as they should) to then be able to normally boot the system again. Upon booting, Windows does not complain of any improper shutdown and boots normally from scratch (sleep/shutdown scenario) and in the hibernate scenario, resumes properly.
I have the latest BIOS and Thinkvantage updates installed, have turned off Blutooth, disabled "always-on USB" , have also uninstalled Thinkvantage Power Manager but have not seen any change.
Reading some of the other threads on here about aging thermal paste and hot running CPUs, could this have fried some of my Power management circuitry?
Could an overheated
Any insight would be much appreciated!
Some follow-up:
- I applied the Intel ME firmware update 6.1.32.1076, see
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-77175
but this did not fix anything.
- Reinstalled latest Lenovo Power Manager and driver, - no luck.
- Recovered original factory image, - still the same ill-behavior.
Has anyone had experience with sending out of warranty laptops to Lenovo for repair (likely motherboard replacement)?
Similar Messages
-
iMac goes to sleep/hibernate multiple times per day after installing Maverick OS. Moving the mouse or hitting the spcaebar will not wake the pc.
I have to shutdown and power back on. My iMac was purchased in January 2011 and no longer in warrenty. The energy saver 'sleep' and 'display' settings are set at 10 minutes. When I changed to 'never' the machine got very hot and I changed the settings back. I have checks by: Put hard disk to sleep when possible and wake for network access. Any help would be greatly appreciated.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Since upgrading to Yosemite my computer (iMac late 2012 model) closes down instead of going to sleep. When I restart I get a message saying "your computer shut down because of a problem". Does anyone have similar problem? What is the solution?
Sorry, I was acting like it was an email. See below:
Sat Nov 8 14:00:39 2014
Panic Report ***
panic(cpu 0 caller 0xffffff802a21e80a): Kernel trap at 0xffffff7fabaa5e28, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002d4e8000, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0xffffff803cbbf000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff81352f3b50, RBP: 0xffffff81352f3bf0, RSI: 0x0000000000000240, RDI: 0xffffff803cbbf000
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x000000e492137674, R11: 0x000000e4917aebcc
R12: 0x0000000000000000, R13: 0x000000000000023e, R14: 0xffffff803cc90000, R15: 0x0000000000000000
RFL: 0x0000000000010293, RIP: 0xffffff7fabaa5e28, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81352f3800 : 0xffffff802a13a811
0xffffff81352f3880 : 0xffffff802a21e80a
0xffffff81352f3a40 : 0xffffff802a23a443
0xffffff81352f3a60 : 0xffffff7fabaa5e28
0xffffff81352f3bf0 : 0xffffff7fabbbd0a2
0xffffff81352f3cb0 : 0xffffff7fab9a64a3
0xffffff81352f3d00 : 0xffffff7fab9a91be
0xffffff81352f3db0 : 0xffffff7fab9a80f2
0xffffff81352f3dc0 : 0xffffff802a6d8008
0xffffff81352f3e20 : 0xffffff7fab9a8d0b
0xffffff81352f3e50 : 0xffffff802a6c5a03
0xffffff81352f3ee0 : 0xffffff802a6be797
0xffffff81352f3f00 : 0xffffff802a16be13
0xffffff81352f3fb0 : 0xffffff802a2192c7
Kernel Extensions in backtrace:
com.apple.driver.AirPort.Brcm4360(900.19.8)[E6DF5F6D-3476-3BA6-B49B-BAADEC7DF58 0]@0xffffff7fab994000->0xffffff7fabf6afff
dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[25CEDABE-0952-309D-AC20-A39DF84 9DFB7]@0xffffff7fab679000
dependency: com.apple.iokit.IO80211Family(700.52)[13EA5B53-E76C-3F27-A9CA-6D3B59AE6F44]@0xf fffff7fab8e1000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7faa924000
dependency: com.apple.iokit.IONetworkingFamily(3.2)[247581D8-DFC5-3AAE-B079-3D13F5514C2B]@0 xffffff7fab235000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000029e00000
Kernel text base: 0xffffff802a000000
__HIB text base: 0xffffff8029f00000
System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
System uptime in nanoseconds: 981693498948
last loaded kext at 264463654768: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7facd6e000, size 69632)
last unloaded kext at 325959214682: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7facd6e000, size 61440)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.GeForce 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.AppleUSBODD 3.5.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOSurface 97
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD ST1000LM024, 1 TB
USB Device: HD-LBU3
USB Device: Hub
USB Device: Apple USB SuperDrive
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 23.4 -
My external hard drive goes in to constant access mode and really slows down my computer
I'm using an external hard drive for time machine. After working for an hour or so the drive goes into a constant access mode and realy slows down my IMac. I look at activity monitor and everything looks good, no high CPU usage or memory issues. The only fix is to use the power button to shut down my IMac. After restart it works fine for a while.
If I turn off time machine the problem seems to not happen. I tried disk utility on the external hard drive and it says the dirve is fine. I change out external drives and the problem still occures. Any thoughts?I didn't realize my profile stated otherwise.
Please check near the bottom of your original post above to see OS X (10.7.2). You might want to update that to avoid confusion and save some time in the future.
OK, please take a deep breath.
Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme....likely because it is not reliable. You might want to review this Apple Support document to confirm:
http://support.apple.com/kb/HT2038
So, we are not going to be able to provide you with much assistance on that issue.
Some users seem to be able to make this work....some have some problems....and some (like me) who have tried this have nothing but problems.
Sorry, I can't help on this one, but maybe another user who has had better luck will post to provide his secrets.
The iTunes and iPhoto libraries and files are my only copies now. I moved everything from my Macbook to the external then deleted the originals.
Not sure if you have thought about this.
If you deleted the "originals", then your only copy of your data is on one hard drive. You have no backups if the drive has a problem.
A minimum backup plan would be to have a copy of important data on two different drives. When....not if...one drive fails, you have the data on the "other" drive.
You have no "other" drive according to the information that you have provided.
Further.....Time Machine backs up the changes on your Mac. At some point....you cannot know when.....Time Machine will pick up the change on your Mac and delete the iTunes and iPhoto data from your Time Machine backups.
The files might stay there a few months, or even longer. But, I have seen instances where the files were deleted within a week or two.
So my advice would be to only delete data from your Mac that you can afford to lose. -
I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim
actually I found the solution :
http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
it's in french, but the images and google translate will be enough
hope that helps for the others having the same kinda problem -
Not Reliably Going To Sleep With Lid Open?
I've had my new MacBook Pro for a few days. I think it is absolutely brilliant. However, last night I left it running on battery with the lid open and returned to find the battery dead. It will go to sleep if you shut the lid or select sleep from the Apple menu.
I called Apple and they talked me through numerous procedures including resetting the SMC, PRAM, deleting various plists and finally a permissions repair on the disk. The latter seemed to make it work.
However, I've found this evening that it still does not reliably go to sleep with the lid open and I really can't work out why. It doesn't seem to be linked to a particular application. Sometimes even if I only have the finder running it will not go to sleep.
When it does work, the computer takes 2-3 minutes to go to sleep after the display sleeps.
I'm running Snow Leopard with all the available updates.
Please can anyone suggest what I might do next?Hi,
I've been struggling with same issue too, idle timer sleep just didn't work most of the time. I am a recent convert from Windows world and there were never issues with PC to go to sleep after idle timeout. With SL it was not so easy.
However, I found a reason (Or two actually) why it was not sleeping, after going through my applications and web pages one by one.
One of them is flash plugin in browsers, if I had any page open with flash, the computer would not sleep. Apparently flash somehow makes SL think it is not idle. Solution to this was to set up flash blockers to browsers. Which is not bad thing overall, flash is mostly adverts anyway on the pages I visit.
Other one was facebook, even with flash disabled. Something in their real-time updating of statuses again prevents sleeping. I tried disabling java and java script too, it might help but then facebook does not work at all. Solution is to always close facebook after using it. Not a really good one, it's easy to forget running.
Hope this helps! -
2008 iMac, display not coming back after sleep, requiring SMC reset and more.
I have a 24" 2008 iMac that's recently started giving me migranes starting a couple weeks ago. It's the kids' shared computer in the bonus room, and one of them comes in and tells me it's not working. I go in, and it seems like it's off, but I can hear the fans going. Won't respond to mouse, keyboard, even hitting the power button that usually pops something up warning that I'm about to shut it down with people still logged in. So I hold the power button down to force it off, wait a minute, and turn it back on. I hear the superdrive sounding like it's trying to load a disc, but there's nothing in there . . . keeps making that noise again and again. No startup chime, no display, nothing, just the superdrive sound. Can't get it to boot. I come to the support site and go through resetting the SMC - unplugging it for 15 seconds. That at least takes care of the superdrive sound, and I get the startup chime, but no video.
I go a step further, unplugging it and plugging it back in while holding the power button down for 10 sec. When I hit the power button after that, it comes on, display nice and bright, but the fans are now running full speed. Another article tells me to reset the SMC for that, which I do, and now the fans are working properly and the system is working again.
Problem is, I wind up having to go through this whole thing every other day. If I follow the steps of unplugging it, holding the power button down while I plug it back in, turning it on and booting up, shutting down and resetting the SMC to make the fans slow down, it will work. But it's random as to when it happens, and I'd really like to know why it could be happening and what I can do to fix it for good and not have to go through the whole thing to get it back up and running. Is it simply on its last legs? Do I need to restore the OS (Snow Leopard upgrade)? Do I need to take it to the Genius Bar and pay them to look at it and diagnose it, and God knows how much to fix?
Or, do I recycle it and just bite the bullet and get a new one? Any thoughts would be greatly appreciated, thanks!
Andythe first thing to try is resetting the pram/nvram
http://support.apple.com/kb/ht1379
if this doesnt work it could be a loose display cable. -
Mail mail was working fine for months but now I keep getting an error message every time my computer shuts down or even goes to sleep. I get the exclamation point error and when I try to reconnect it always falis. My internet connection is fine and nothing else is losing connections. The only way to fix it is to shut down mail completely and restart which fixes the connection every time, but it's getting really frustrating have to constantly shut down mail and restart it just to use my email.
Bump ???
-
Not waking up from sleep whilst back of display unit getting very very hot.
I have had my first mac now for just 6 months, over the last 6 weeks or so it has intermittently failed to wake up when it goes to sleep for prolonged periods of time i.e striking keyboard, moving the mouse or pressing the power button. As well as this the back of the display unit is getting extremely hot to the touch. The only way to resolve this problem is to pull the power cord and let the display unit cool down before it will switch back on again which can take a couple of hours.
Has anyone else experienced or is experiencing this problem.
Jameshave you tried to just let it wake up? I had an issue (similar) were the MBP would be asleep, I would mouse the mouse or hit a key to wake it and it would sound like its waking up but the screen was blank. I would either close the lid or just power down. One time I just let it sit and with in a few minutes it came on and the frequency got further apart.
but I haven't have any real issues since 10.5.2 and a few other updates.
+When in doubt . . . seek a genius out . . .+ -
I have to upload a scanned receipt to a website and I get the error message "connection was reset". I have uploaded these receipt for two years and last week I have had to use another browser to complete this operation. I connect to the website and do the report I must do, but I can no longer upload to this site.
Are you using any additional software for the uploading?
Try using Firefox in [[safe mode]] when you upload. There is no need to make changes when you see the option. Disable all plugins whilst in safe mode. Then try the uploads.
You mention [/questions/921993 elsethread] that it is a work site. Have you contacted your IT department. One possibility is that the site is not recognising Firefox 10.
(One temporary workaround and troubleshhooting test would be to install Firefox3.6.27 [http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released portable] as an additional browser and try that.) -
Hi All,
I am getting increasingly frustrated at the battery grossly overheating ( as in cannot hold it on legs as gets too hot) also that I have to keep it on constant charge a other wise it discharges from 100% to zero in well under and hour. Is this a battery or design fault of this particular model. Its not even a year old but I also know whilst they brought it out in March 2012 they discontinued in October 2012...
Can anyone assist as Apple lcearly want nothing to do with a now defunct model and I am thinking that perhaps with the backing of the Trading Standards Authority and the Office of Fair Trading, Apple might just want to sit up and listen as up until now they have not. They simply suggest that I should trade up!!!Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Is your iPad jailbroken?
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
http://support.apple.com/kb/HT3743
Cheers, Tom -
I have chosen not to use iCloud for the time being since the syncing was inconsistently working with the calender and contacts; and cannot get the Reminders on my Mac to sync/replicate onto my ios device, neither iphone nor ipad. Help is appreciated in respect to Reminders. Thank you.
ok, thanks. couple other questions...
1. will it sync to my reminders on my MAC too if i enter via icloud? if not, what's the reason for having the reminder list available on my Mac if it can't sync?
2. I have 2 different email accounts, one with a .mac address and another with .msn. both can be accessed via icloud. i ran a test using my msn acct as the signin and it logged the reminder onto both the iphone and ipad fine.
however, when i try with my mac address, it only shows up on my iphone, which list reminders under icloud(which worked on both devices and then under mac which worked only on the iphone, not ipad. any idea why that might be happening?
thanks for your help. -
My iPad is not charging and it gets very hot
My iPad isn't charging and it's get really hot.. What is wrong with it?
Hello there simisammy,
If the iPad is not recognized in iTunes then I recommend this article iOS: Device not recognized in iTunes for Windows found here http://support.apple.com/kb/TS1538.
This is a basic over view of the troubleshooting involved with it.
To begin troubleshooting this issue on your iOS device, first follow the steps in the appropriate troubleshooting assistant below:
iPhone Troubleshooting Assistant
iPod touch Troubleshooting Assistant
iPad Troubleshooting Assistant
If the issue persists after following the troubleshooting assistant, continue with the steps below, testing to see if the issue is resolved after each section.
Collapse All Sections | Expand All Sections
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
When that is finished I would recommend this article
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Regards,
Sterling -
i just bought an iphone 4s a month back
the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
Hence the caller feels that i am not answering his call nor even calling after i see his missed call
this is a very grave problem i am facing
please help me out.
chetan sanghvii just bought an iphone 4s a month back
the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
Hence the caller feels that i am not answering his call nor even calling after i see his missed call
this is a very grave problem i am facing
please help me out.
chetan sanghvi -
My apple tv just froze or hung , it was working then nothing, only way to power it up is to unplug then plug it in , but staays on the main screen frozen, if i try to use the remote it just flashes 2 x fast and does nothing, i assume its connected or i would not see my itunes etc
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.
Maybe you are looking for
-
Releasing transport request has an error during the 'export' step.
Hello Everyone, My environment is ERP 6.0 EHP6, AIX 6.3, Oracle 11g. We have a transport request that was created in our development system by deleting some obsolete roles. When we try to release the transport request to our q/a system it terminates
-
I have installed and reinstalled Reader 11.0.10 on my Mac It is Mac OS 10.10.1 running Safari 8.0.2 I cannot open PDF files properly, I only get partial information. Reader does not show up when I try to open with other files. When checking plug-in
-
New MacMini - Portrait Mode Issues
Hello All, Just set up a brand new mac mini, and I am trying to get the screens set up. My Primary Monitor is a 27" Asus (recent model, can't see the model number) in Landscape Mode via Thunderbolt. My Secondary Monitor is a 24"Asus VW264H via hdml->
-
Hi, I want to restrict persons records based on their assignment - organizations. Approach 1: For this i have created a new custom security profile in Organizatin Security tab Security Type : Secure organizations by organization hierarchy and / or or
-
Burning iTunes playlists onto a DVD
I want to burn playlists from iTunes onto a DVD, primarily for backup purposes. But also, to give get them into another...PC...computer. I have iDVD 5, running Panther (10.3.9) I was told I could do this and it would work basically the same was as bu