X201S Wlan Issue

Hi,
I received my X201s today and it works quite fine. Nevertheless I have a problem:
I have a Linksys WRT610 Wlan router, which provides two wireless two SSID, one is providing 802.11g and one provides 802.11n. I can connect to the g-net without any problems, but I cannot connect to the N net. Both nets are secured with WPA2/TKIP. I also used the N-net with another notebook and therefore I know that it works.
The error code which is displayed in the diagnostics is 229377. This cannot be - I am sitting very near to the access point.
Thank you for your help

Hi,
      have you checked to make sure you have the WLAN antenna?  You probably only have the WIFI. Check to confirm you have both antenna to recieve both. Hope this helps.
regards, Karim.

Similar Messages

  • IOS6 fixed my WLAN issues!

    Hi all!
    I just had to share this with you all. Since the release of iPhone 3 I have had WLAN issues (at work, at home, anywhere) resulting in WLAN getting disconnected from time to time. Recently with iOS5 on my iPhone 4 I had to manually connect to the WLAN each time I used my phone. Irritating to say the least!
    But since the iOS6 upgrade the WLAN connects itself in about 5 seconds from that I wake the iPhone from "sleep".
    I might just stick with the iPhone 4 and not get a 5:er since I´m finally really happy with my phone!

    I dont think it works correctly GSPEARSON as changing my BTID password had no effect on my email password.  The BTID password was changed on numerous occasions during trouble shooting with no effect.  The only way to actually change my email password I found was using the password change feature under manage emails after switching my default email address to another.  This password change feature is not available to the default email account only other owned addresses.
    BT's system isn't clear or coherent in my view.  It is also misleading that you can have say a password X for your BT ID and a password Y for your default email address and can access it through either (login through btID then click emails using X or login to btmail.bt.com with Y.  I dont like that at all.

  • N97 mini WLAN-Issues after 12.0.110-Update

    Never had issues with WLAN-connection on old fw. Did switch off-on already both, the WLAN-Router and the N97mini. Do not want to make a reset because then i have to re-install everything again......
    I can usually connect once, for a short time, for one action. (Like synch Favourites with OVI-Maps). After that no chance any more for several minutes.
    When i go to connectivity-wlan it says "no wlan available", even after rescan.
    I simply have to wait for half an hour, then i can connect again, for one action.
    Anybody having the same issue?
    Solved!
    Go to Solution.

    Same problem here.  Just upgraded to the N97 Mini from the E61.
    I first noticed it in the pre-installed Podcasting (which I listen to 2+ hours a day).  Downloads seem to hang after about 10-15 meg of the download is complete.  I then noticed it in Ovi when trying to download a video and it would hang during the download as well.
    In Podcasting, I have to keep the connection manager open so I can disconnect the connection, then reconnect again in Podcasting.  It is very frustrating as an hour long podcast takes three cycles to complete!  Please help us Nokia!
    In Ovi - you just can not download large files.
    BTW - I have a D-Link Router in case there seems to be some type of compatibility issue?  No way to test on another WLAN connection at this point.
    This is the only major issue that I have identified so far since owning the phone (unless one counts that the phone is absent an automatic polisher/fingerprint remover).
    Patient for now - waited to buy this phone instead of getting an eye-moan.  Please fix the WLAN issue.

  • Zbook wlan issues

    I have a brand new Zbook 14 with Windows 7 64 bit OS, where I have two issues.
    1) The Wlan is not working in my home. Windows is complaining over no Internet connection.
    All my other devices are working at home, so there is definately no issue with my connection.
    I can't even surf locally to my router with IP , so its some other issue with WLAN towards my router/access points.
    The WLAN in my Zbook is working ok on other accesspoints, like the iPhone internet sharing service etc...
    I read about some issues with 5GHz band with Zbook, but haven't found any solutions.
    2) Also there is an issue if I enable BIOS setting LAN/WLAN switch to automatically change between LAN and WLAN. If I enable it, Windows will not boot corretly. It gets extremely slow and makes noise from the speaker. 
    Any suggestions?
    Thanks!
    /Peter

    Hi Peter_thule,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • E71 wlan issue after firware upgrade

    I just upgraded by E71 to the latest software version. The upgrade went without any issues. After the upgrade I realised that t had removed all my contacts - so I had to restore my backup(I restored the SETTINGS as well). I was using a app for my 'WiFi' (for prioritizing my access points) and after the firmware upgrade - I could not see this app at all. The following are my issues now:
    1. I cannot connect to my home wifi(WEP) - it was fine before the upgrade. The first time it says - 'Connection not available' and every subsequent time it irritates by showing 'WLAN already active. Please close the connection and retry'.
    2. I have tried to restore the factory settings and it still does not work.
    3. I have renamed my Access point to the ones that the app was using - still no luck.
    So, what are my options now? Can somebody please help? I never thought a small software upgrade could spoil my whole evening!

    Hello,
    I have just had EXACTLY the same problem.
    I have a Nokia E71 and it was working OK before the upgrade. I just used the latest Nokia Updater and latest nokia pc suite to upgrade to 500.21.009.
    The upgrade performed perfectly, and after the upgrade I restored my backed up data.
    I have the exact symtpoms as psankar. I have factory reset the phone and tried again. Same problem.
    Connection not available, and then connection already active. Small Wireless icon appears at top right of screen, and stays there, but there is no active connection in connection manager.
    The only way to remove the wifi icon and to get the phone to attempt to reconnect is to power off the phone, but then on reconnectig then you get connection not available and then the whole cycle begins again.
    Help appreciated
    TIA
    Alex

  • Portege M400 - WLan issues connecting Orange Livebox

    Hi
    My landlord recently upgraded our WLan by introducing an Orange Livebox. I have tried everything possible to connect wirelessly to the router but to no avail.
    All the other machines have connected with no/little issue/s. I have installed Configfree again, tried connecting through the Windows system as per instruction by Orange website, re-typed the WEP code several times. Tweaked the network connections, Installed the new Intel drivers and installed the Orange Livebox software. I'm running out of options very fast.
    The wireless connection is found, it tries to connect but will not give me a network address, even with the lights flashing (as per Orange instructions), yet when connected through an Ethernet cable there is no problems what so ever.
    I have had a look through the forum and found nothing that exactly matches my problem and tried to implement those suggestions that sound familiar but nothing has worked. Failing any advise, I will just have to phone either Toshiba, or Orange up for advice, however, I would like to be spared long conversations with people in Technical support.
    I have a Portege M400 with an Intel(R) PRO/Wireless 3945ABG built in adapter.
    Any suggestions anyone?
    Many thanks
    David

    Hi
    In such cases its not easy to say why it happens.
    One of my notebooks is not able to connect the WLan router because the router supports Wlan 802.11 BG mode and my Wlan card support A and B mode.
    But you should firstly check if the Windows firewall was disabled. Then disable the encryption on the router and try to connect the notebook without the encryption.
    Sometimes the MAC address filtering was set on the WLan routers. In such cases only the registered WLan cards can connect to the WLan router.
    I would recommend disabling all filters, encryptions and then trying to connect to the wireless LAN. If you will be able to connect the router then you could enable the encryption again.

  • Helix2 - WLAN issues after connected standbay

    Hello,since I have bought my Helix 2 in February, I constantly have problems with the WLAN connection after the Helix resumes from connted standby. I already installed all driver updates, however non of them was able to completly fix the problem. Either the Helix shows limited connectivity or no networks can be found. Depending on the installed update the former or latter issue occurs. In order to fix these problems I need to deactivate and reactivate the intel wirless device. Thank you for your help!

    We did make some mileage on this issue in the past week.  After replacing motherboards (which didn't help) and even depoting a unit, the fix below appears to be working. Do the following: 1)  Install the latest drivers from Lenovo directly (not using the automatic update utility)   
    https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/n1gw202w_64.exe 2)  During that install, choose repair.  You will notice that several files that were missing will be detected and installed, including a few .dlls 3)  After that install you will notice that the lenovo update utility will detect that you need to update the software. Go ahead and let it do the update. 

  • WLAN issues

    got my C3-00 last week.  First day, it saw Wlans, connected to one, saved it. It worked fine for a couple days.   Setup a new WLAN at home.  Then I added my bluetooth to the phone.  Now it cannot see ANY WLAN's.  When I search, it just runs and runs and returns nothing.  I know there are a dozen here, can see them on my Laptop. 
    Also, now it will connect to the original WLAN I saved.  Also, will not pull down my email.
    I though perhaps Bluetooth caused a problem, so I turned off bluetooth.   Still nothing.

    Hi @waleedahmed,
    Thank you for your inquiry.
    I understand that you are unable to connect to your personal network but can to hot spots.
    You did a recovery back to Windows 8.  When I checked the specifications for your notebook I noticed it came with Windows 7.  If you did a HP recovery back to factory setting you would have reinstalled Windows 7. 
    Did you mean you did a Windows refresh which installs Windows 8?
    Have you done all your Windows updates?
    If you check in Device Manager is there any error messages on the network adapters?
    Here is a link to HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) that should guide you through some steps to resolve this difficulty.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • WLAN issues with N8

    Hi All,
    I have developed an issued with my N8 where I'm unable to browse with a WLAN Connection. I'm able to see WLAN connections and connect the device to the WLAN. But when I start a browsing session (trying to access Google), it gives an error. Also, tried connection to other websites but the same error pops up. I have also checked the WLAN is connected all the time. I have tried chaning the priority settings in the Access Point, chaning the access points in the bookmarks but to no avail.
    I was able to connect to WLAN previously until after I updated to ANNA. I'm unsure where and what settings I had changed after that (as it was automatically connecting to packet data causing my phone bills to shoot) which is now causing the issue.
    If anyone has a solution to this (except a hard reset), please reply to this post. I would not prefer to go for a hard resetting as there is a lot of data in the phone and I have already used up the 1 yr free subscription of OVI.
    Thanks in advance,
    Manish K.

    babis3g wrote:
    the latest update is 14.02 but i think even that firmware has not fix for wlan problem bug
    i dont know why the nokia updater does not show you the update
    you need to go here
    http://www.nokia.co.uk/support/download-software/device-software-update/can-i-update
    and type at the end of page your mobile serial product code and see if you can update
    My N8 is now on PR1.2 - I think I got an OTA notification of it being available.
    Haven't made any changes to config - have WLAN scanning off. But does seem to connect to my home WLAN / WiFi in a sort of random way. Not sure whether to think it's any more robust, or not, really, I just think it's something of a shame that other devices (Blackberry phone, 1st gen iPod touch, and other WiFi devices) have no trouble, whereas a fairly new phone has.
    I guess I just wish WLAN / WiFi worked reliably, really (WPA2, fairly long PSK - that I shouldn't have to change just because of one new-ish device).
    The other question I had is what's the purpose of the small, white LED on the side of the case - just above the USB port. I've not read any description or explanation of it, so wondered whether anybody knew?

  • WLAN Issues - AP Associations

    Hello,
    I am having issues with our WLAN, I have two APs setup but it seems only one is ever associated with my Wireless controller at any one point.  I believe both should associated with the Wireless controller at all points?  This is backed up by continual performance and signal issues with any clients who attach to the WLAN.
    I have included a screenshot to show the issue.
    Can anyone shed any light on what is going on?
    Thank you
    David.

    That output shows both AP's joined to the controller.  It shows that the client is only associated to one or the other.

  • E-70 WLAN Issues

    I have following problems with my new E70 WLAN connectivity:
    I defined an access point (AP) for home (w/ WEP Key) and another one for University campus (Open). It connects at home but always ask me to enter WEP Key. If I change browser settings to user defined AP and select message is: Access Point Not found or sometimes Gateway Disconnected. The connection gets establish if I change browser AP settings to "Always Ask", but I have to enter WEP key for every new page/session. Even so the connectivity drops out in about every 2 minutes. (I have a DLINK DI-524 at home)
    The story at university campus AP is totally different - there at some AP it keeps showing connecting bar forever, but never connects. At some other APs it will make the screen blanc and then the Nokia logo aprears, after about a minute of freezing out, I get a promp that "New Voicemail". No new voicemail is there - attempt to connect to the WLAN is malfunctioning.
    Firmware: 1.0610.05.07 30-05-06 RM-10 Nokia E70
    What do I need to do? Is there any firmware patch for this problem from Nokia? I do not want to pay subscription to birdstep.com. The WLAN feature should work on all popular AP and Router models.
    Any help/pointers/software/firware is appreciated. Thanks a lot.
    Nokia E-70 Firmware ver 1.0610.05.07 30-05-06 RM-10

    Hi,
    Just to confirm that there _IS_ something wrong with the E70 and Linksys AP's
    I've got myself E70 UK edition yesterday, the firmware claims: 1.0610.05.07 30-05-06 RM-10.
    To describe the problem:
    At work I have a Linksys WAG54G (Firmware ver 1.02.1 apparently newest), connectivity works, but it takes a good 10-15minutes to get logged in. Since when the E70 starts to try and access the (WEP 128 encrypted AP) I see the MAC in the Linksys's ARP table, while the phone does not respond on any Wifi Applications. To see when it works typically for me I would use the browser and make it try it will get stuck on "Connecting" and after about 10-15minutes the page would show up, from then on the VOIP, etc. would work without a problem.
    At home I have a DD-WRT (newest SP1) flashed Linksys WRT54GS v.4 with no encryption, I have _exactly_ the same behaviour logging in to it as above. I also have a WAP54G (v3.1) Firmware v3.05 (dec 28 2005) which has _exactly_ the same symptoms.
    I also have a Belkin Wireless G (model: F5D7230-4) and at Firmware ver F5D7230v4_UK_6.00.21 at home which lets my E70 log in about 3 seconds (including displaying of a webpage).
    All 3 AP's at my home are Open (no WEP), on the same LAN and uses the same DHCP server, etc, all of them work fine (tested individually) with multiple machines connecting to them without a hitch, I'm blaming the E70 not being "happy" with the Linksys gear.
    I read today on http://www.voip-info.org/wiki/view/Nokia that the modified WRT54G can be "fixed" by making the router ignore packets in a invalid state, I can only think that the E70 sends malformed packets which the Linksys routers usually drop, it is strange though that after 10-15minutes it _does_ log in and it seems pretty much usable from then onwards.
    So, IMHO I hope Nokia will look into this and come out with some firmware after they fixed their wifi ip stack issues.

  • WCS used to configure SSID broadcast for WLAN issue

    Hi,
    When I try to disable the broadcast parameter for an SSID on a WLC using WCS (4.0.96.0), I am running in to some issues.
    I uncheck the 'Broadcast SSID' check box for a particular SSID and then submit the change. But, after I submit, the check box is still checked. If I verify the setting on the native WLC web interface, the Broadcast SSID parameter is still enabled.
    I can change other parameters OK, so I don't have an SNMP issue.
    If you perform this operation from the WLC web interface or the command line, you have to disable the WLAN first, before the SSID broadcast can be switched off.
    I suspect that WCS doesn't have the intelligence to disable and re-enable the WLAN to perform this operation. But, it very frustrating that it doesn't even generate a warning or failure message to say that the operation has failed.
    Anyone seen this or can perhaps tell me if I am mis-operating WCS in some way ?
    Thanks.

    The WLANs tab allows you to create, configure, and delete WLANs on your controller.
    You can access the following pages from the WLANs menu bar selection:
    WLANs
    WLANs > New
    WLANs > Edit
    WLANs > Mobility Anchors
    AP Groups VLAN

  • T410 Wlan issue

    Hello everyone,
    I am facing a strange issue with the Wlan of my Lenovo T410 laptop. It works fine in for 1 or 2 hours in my wifi-hot spot.
    And suddenly stops working, although it shows that it is connected with the access point with good signal strength.
    I have checked at different locations, it makes problem only in my hot spot.
    Any suggestion please to help me out.
    Thanks
    Solved!
    Go to Solution.

    Hi, Shaka
    Have you ran into this issue with any other devices connected to your Hotspot, such as a mobile phone, a tablet, or another laptop? If you haven't tested this, I would try another device and see if you experience the same issue, if possible. 
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • WLAN issue using Nokia 5530

    After that i did a hard factory reset.
    Everything works on my phone except WLAN.
    Everythime i try to connect with a router (no matter which) the phone says "Connection not available".
    I have nearly the same problem with the data connection...
    Could anyone help me please?
    I Hope that i must not do the hard reset again... 

    Hey thomasvdp1994,
    Welcome to the Nokia Discussions forum! Check out the WLAN section in user guide from the page 127 onwards. If you can't succeed by following the steps there, try to create the WLAN access point manually like instructed on the page 130.
    Try to recreate the data connection as per on the page 132.
    If the connection is still unsuccessful, back up your data with Nokia Suite and do the hard reset again. You can also try to reinstall the phone software with Nokia Suite > SW updates > Reinstall
    Hope you get it working again!
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • N81 SD Version WLAN Issue

    Hi , not sure if anybody faced this issue, I've this problem with my phone when I powerup the phone and comes to the main screen , the WLAN app will activate to show me a list of WLAN networks even though I have not activated the WLAN search mode. This goes on for 2~3 times each time I power up my phone even though I upgraded my phone from 10.XX to the latest 11.0.045.
    Can Nokia pls advice on what is causing this problem?

    Hi
    Thanks for the info that you could solve this issue using an different SD card reader driver.
    Greets!

Maybe you are looking for

  • Adobe Lightroom 7.2 64 bit installed but will not open error 0xc000007b

    After 3 days of tryng to download and run the above I was finally able to get it on my machine today.  During the past 2 days I would get Lightroom downloaded but it would not install as per the above error.  Today I copied the download URL into Safa

  • IMac to component HDTV?

    Situation: I hate Comcast. I have a new LCD HDTV that has a built in HD tuner and now I can pick up all my local HD channels with only basic cable! Score! $14.99/mo! Sweet. NOW HERE IS THE ISSUE: If I do this, I will not be able to pick up HD on my o

  • HashMap cast

    HashMap<Object, Object> parameters = (HashMap<Object, Object>) request.getParameterMap(); this.setRequestContextMap(new HashMap(parameters)); This is giving me warning: [unchecked] cast. warning: [unchecked] unchecked call to HashMap(java.util.Map<?

  • XL Reporter error on report composor - wont launch

    When trying to compose a report get the following error. Unable to create component - Report COmposor.ixreportcomposer class not registered looking ofr object with  CLSID:{35F4532F-F492-47C1-9203-361B0ESA8E22} Anyone got any ideas.

  • How to use recursive in Information Design Tools?

    Hi all, I want to use recursive for count number of employee in each organization. I write code something like this. with EmpCTE as       select RootID = D.ORG_CD , D. ORG_CD, D .ParentOID       from  (SELECT     CURRENT_LEAF as ORG_CD ,