X205-s7483 Not burning

Recently mi DVD-R unit stop recording file cd's, when i try tu burn a flie cd with alot of files the program burn it but the cd does not work, any computer can read it, but when i burn firs an image file, then i burn it in to the cd works grate.
I was trying with, nero, roxio, nti & windows, but no one burn it in file cd mode, directly. i have tu burn an image the the image burn in to the cd.
dvd images burn it well.
What can be ?

Try the SL forums if in fact you're running it now.

Similar Messages

X205-S7483 Flash,Freeze,Fail

Bottom line I just maxed out my memory and installed two new HDD's on my x205-s7483; I then proceeded to install Win7. After awhile I had a problem getting my Mass Storage Controller installed, I hadn't flashed the bios yet so I then searched for an option; I then discovered a 64 bit solution so I proceeded to flash my bios. As it ran for quite some time (1hr +) it was frozen and not thinking; as I force closed (killed all power + battery pull, power button did nothing by the way total freeze) and now i have nothing but a power indicator the HDD's spin and my CD-rom will too, but no display or Bios. I have seen some links to BIOS recover disks, a UK site has one but it’s like 7 or 8 bucks American and I don’t know if it would do anything; it says no matter the operating system it will recover BIOS… really?. Anyone have options or ideas, I figure my bios is gone now but i have no idea of the options available to me if this is the case. Thanks in Advance, Jinsama

Most places charge about $100 or so to fix it and the turn around time depends on where you take it or send it. Some places can get it back to you in about a week while some places are taking much longer. If the system is dead it's impossible to load a bios repair disk to fix it. That is caused by bios coders who don't know what they are doing. PROPER bios code requires that the boot block remain seperate from the rest of the bios to avoid an issue like this. It isn't supposed to be touched during a bios flash. These days people are in too much or a hurry and just write the bios file and updater to flash the entire bios chip and when the flash fails there is no boot block to fall back on preventing one from reflashing the bios without an eprom burner.
Also, if you ahve used a Windows based flash utility successfully in the past you were lucky. I've rarely seen it work correctly, and when it goes bad there is NO way to do anything about it. With a self booting disk based flash utility, especially a FLOPPY disk one there is normally a chance to save a flash going bad if one is prepared for it.
As far as 64bit support, that has as much to do with the chipset venders as it does with Toshiba. 64bit is fairly overrated at the present time. Most users are better of with 32bit at this time, especially on laptops.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Satellite x205-s7483 Screen locks after a few hours

Hello all i'm having a problem with my satellite x205-s7483 I've had it about 2 yrs now and lately the seen locks up and I can't move the pointer with the mouse and all the keys are unresponsive. I have to hold the power button till the laptop shuts off then boot it up again. It then works fine but when I leav it alone for a few hours it locks up again. Any ideas whats wrong? Is the memory failing? Any help would be appreciated. Thanks

Satellite X205-S7483
Let's try to learn more.
Note the computer-clock time when lock-up occurs.
Open Event Viewer (eventvwr.msc) and expand Windows Logs.
Inspect the Application and System logs for a (preferably Error) event at that exact time.
Don't try to copy anything manually. Double-click the entry and click the Copy button to put the details on your clipboard.
Paste that without editing into your reply - except include only the part above the line Event Xml:.
-Jerry

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

I can not burn CD's with my Itunes anymore. It tells me I am missing CD burner and to re download ITunes. I have done that and it stills does not work. Every time I try, Disc Recorder not found keeps coming up! Please someone help me!!!

I can not burn a CD with my itunes anymore. It tells me to re download itunes. I have done that and still have the same problem. When I do try, Missing disc recorder keeps coming up. Please help!!!!

Hello again, Stew.
Also when I open itunes it gives me a warning and says "The registry settings used by the itunes drivers for importingand burning cd's and dvds are missing. Please reinstall itunes."
With that one let's first try a reboot and repair.
Reboot the PC (very important), and the do a *repair install* of iTunes.
Go to your "Add or Remove Programs" control panel, select iTunes, click "Change" and then click "Repair".
Does iTunes launch without the error message now?
If no luck there, try checking for a device filter conflict in your registry:
iTunes for Windows XP: Troubleshooting CD issues caused by device filters

ITunes 8.1 will now not burn/import or play anything at all.

Ok since installing the new 8.1 upgrade of iTunes I am now unable to anything at all. First of all a window popped up tp inform me that the drivers could not be found so I couldn't burn so please re-install iTunes. So I did and now not only will it not burn anything, it will not import ( it won't recognise any cd that i put into my drive at all ),it won't recognise my ipod and it won't play anything that is in my music library at all. So is there going to be a repair to this from apple at any point? I now have now way of getting anything onto my ipod at all. I have tried to re-install itunes several times since and still get nothing. It just does not do anything at all!!! Come on apple, this is serious, can someone please sort it?

try removing the iTunes, then do a fresh install and this time check the box for installing both Bonjour for Windows and Quick Time.

1st Gen iMac G5 "SuperDrive" Not Burning CDs or DVDs

as of late it seems my superdrive is not feeling very super,
after a recent Cleaning (reformatting and installation of OS)
I was unable to restore any of my work from backup DVDs.
The drive will ONLY read CD/DVD Meadia that is Mastered
ie: a Movie Bought or rented from a store...
and the same goes for Audio CDs. I'm in Multimedia
so of Course at this point NONE of my Backup disks are functioning and I can't
write any of my Current works to CD/DVD...
The Error message is as follows
- The Disk was not Burned do to a Medium write error......(gulp).......help?
My Latest&Dearest iMac G5 (Vikki) Mac OS X (10.4.9) Over 20 other various macs icluding some of my CUSTOM Macs
My Latest&Dearest iMac G5 (Vikki) Mac OS X (10.4.9) Over 20 other various macs icluding some of my CUSTOM Macs
My Latest&Dearest iMac G5 (Vikki) Mac OS X (10.4.9) Over 20 other various macs icluding some of my CUSTOM Macs
My Latest&Dearest iMac G5 (Vikki) Mac OS X (10.4.9) Over 20 other various macs icluding some of my CUSTOM Macs
My Latest&Dearest iMac G5 (Vikki) Mac OS X (10.4.9) Over 20 other various macs icluding some of my CUSTOM Macs
My Latest&Dearest iMac G5 (Vikki) Mac OS X (10.4.9) Over 20 other various macs icluding some of my CUSTOM Macs

To Apple Discussions.
Open up your OS Help Menu. In the search field type dvd.
In the next window a list of troubleshooting topics will appear. Click on the one(s) that matches your issue.
Hopefully, you will be able to solve your problem from the list.
If not, please post back.
P.S. You sure own an awful lot of Macs!

Windows 7 does not recognize cd/dvd drive. Will not burn a disc

           In November 2013, I bought a refurbished hp Compaq 7900 convertible minitower, Product No. NJ3226UC#ABA, 32-bit. Windows 7 and WMP 12 were installed by the company that refurbished it.   WMP's  play, rip, burn, sync worked perfectly.
           I made the mistake of installing itunes. I purchased music and made a playlist from my library and itunes. I tried to burn the playlist with Memorex discs.  WMP burn would kick out the cd at 99% complete. I tried a different brand of disc and had the same problem. The message each time was 'Windows Media Player Encountered an error while burning. Verify that the burner is connected properly and that the disc is clean and not damaged.' I tried burning a disc using itunes burner but it didn't do anything.
           First, I removed every Apple application from my computer. Then I ran Microsoft CD/DVD trouble shooter. It didn't correct the problem and gave me the message "cannot locate CD/DVD burner". I ran trouble shooter in the Control Panel selected System Security's, Find and Fix. Then Selected Configure a Device . Results were 'Hardware may not be detected try to do what you wanted to do again' I tried 2-3 times. WMP would not burn.  Tried Apple for help and didn't want to reinstall itunes. I reinstalled Quick Time.   Followed Microsoft's 5-step resolutions:
          1. Used the troubleshooter in Control Panel.
         2. Ran CD/DVD Fixit trouble shooter.
          3. Manually fix corrupted registry.
         4. Update or reinstall driver.
          5.  Create a sub registry key.
I tried to burn after every step and got the same result.it burned to 99% and kicked out. I used system restore back to May 15, 2014 thaat was before installing iTunes. No burn.   Checked driver and response was that 'Driver is working. No problem was found'.    Today, ran Troubleshooter in ControI Panel and this was the messsage, 'Configuration Settings May Be Incorrect'. How do I correct this? Help! What next?

Hi,
You were given some very good advice on your other post. I ran into a very similar issue when I had installed iTunes and the end result was that I had to do a factory recovery back to a day one condition. Then I had to do a slow software installation process, checking every time I had installed a third party application. I got tripped up a couple of times but determined that I had to install iTunes before installing other CD/DVD media programs (Roxio,WMP and Cyberlink).
Do a fresh OS installation without the extra third party software and then install Imgburn. Then use Imgburn to determine the capabilities of your optical drive and match the media specifications those detected by Imgburn to the media type that you are using. Do not use cheap media as the firmware in your optical drive may not support it. I prefer to use Verbatim media. Now see if Imgburn will burn your optical media before attempting to install iTunes and other CD/DVD optical media programs.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

Drop zone of loop in the film stip template, works in simultor, not burning

Droping a loop from the film into the drop some in a chapter menu and it shows up on the simulator. when I go to burn or build etc there is just white where the loop should be. everything else is workinng fine just but no loop- any ideas out there?
thnx

OK bigger problem- the all NTSC DVD that used the same template [film strip] also had no problem in the simulator, but I just build/formated it, and the drop zones in the menu buttons whent all white again- same as yesterday. I also checked and they were all software based in the menu prefs. something is wrong here, there is like a "flash frame" of the first frame of the loop, frozen for a split second. and then when the motion starts it all goes to white in zone. I am really flumixed here, did I change something in the targets or is it still burn realted? but why does it work in the simulator, like a charm and then it does not burn????? FRUSTRATED

Idvd will not burn after upgrade to maverick

Hello-
I just upgraded to maverick and now iDVD will not burn a DVD - says it does not have a compatible superdrive. It was working fine until I upgraded. How can I burn a nice DVD now?

Suggestion only. Before launching, did you also check for updates via apple's software updater?

Superdrive will not burn on mountain lion

After installing mountain lion on iMac, superdrive will not burn or recognize cd/dvd. Have tried several different brands and burning software with same results.

If you have a CD or DVD, insert the disk and see what happens. If the drive kicks back the disk or gives you some kind of error message, then it's most likely a hardware issue, and might require a repair. However, if the drive seems to work fine mechanically, then it's a software issue.
http://support.apple.com/kb/HT2801?viewlocale=en_US&locale=en_US
http://www.macworld.com/article/1166312/cures_for_an_uncooperative_cd_dvd_drive. html
Follow these links, and post with your results; others will gain from the info!

Will not burn photos to disc

iPhoto will not burn photos to a DVD disc(Maxell DVD+R).
iMac response is:
"The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry."
These Maxell DVD's are probably 2+ years old. However, I was able to burn 2 disc early this morning. Could it be a heat problem with the SuperDrive?
Your Thoughts?

If you have burned 5 or 6 disc in a row then maybe heat could be a concern. I don't think so with just 2. Are you able to burn a disc, CD or DVD, from the Finder or is it just from iPhoto?
Run the Apple Hardware test as described here: OS X Mountain Lion: Use Apple Diagnostics or Apple Hardware Test
OT

IDVD will not burn disc after QT update

IDVd used to work just fine. I did software update and updated Quicktime to version 7. I found that my Quicktime Pro key for QT 6 would not work with QT 7. I called Apple support and they told me how to revert back to QT 6. I followed their steps and successfully have QT Pro 6 back, but not my iDVD projects will not burn. It gets to stage 4 multiplex and burn and spins for hours. When I hit cancel, the disc ejects and is unburnt.
I have followed Apples steps to solve a no burn when you upgrade to iDVD 4.0.1 (remove encoded assets) and this does not fix the problem.

Hi Dennis
There is ways to delete all of QT and then make a clean install but the
easiest way is to download a back to QT 6.5.2 file from Apple support
and downloads.
I've done this and keep it till I get an upgrade that takes away the old
files before installing the new ones.
Yours Bengt W

Since 10.4.4 (10.4.5) - i can not burn Data-DVDs anymore...

System: iMac G4, 1GHz, 1GB RAM, Mac OS X 10.4.5, 4x SuperDrive (SONY DVD RW DW-U10A)
Dear Apple Support,
since Mac OS X 10.4.4 (same with 10.4.5) i can not burn a Data DVD-RW anymore. It is so annoying. I want to burn my backup on a DVD-RW with the Burn Folders in Mac OS X. it is not possible.
The Finder burn dialog hangs at the "ending burning process". It is so annoying.
It's not possible to erase this "half burned" DVD-RW too! So I have here a lot of destroyed DVD-RWs around me...
The burning of DVD-RWs is a problem since 10.4.0 here on my machine. With 10.4.3 it was half o.k. ... But since 10.4.4 (10.4.5) nothing works anymore.
Your product "Mac OS X Tiger" is nearly one year in the market. And burning a Data-DVD is not a exotical thing. It is a essential feature of a Operating System today. So what are you doing in your Test-Labs?
I am sitting here since 1 year with an Operating System from Apple an it doesn't works in the essential features.
Whats about your slogan "It just works"?
What happens with the quality of Apple?
Under 10.3.9 Panther i can burn everything. It absolutly no problem there.
So i don't understand what are you doing with Tiger?
It's so annoying!
Regards
Roessner

Hi,
I've got exactely the same problem and I have no solution at the moment.
Is there someone who could help us, please?
Thanks !
you can reply to : [email protected]

X205-s7483 Not burning

Similar Messages

Maybe you are looking for