X220 Intel Display Audio problem

I received a new X220, and I initially had the same problem getting audio through a displayport to hdmi cable that other users have experienced. For me it turned out to be the cable. I got a new adapter and the audio worked great. As soon as I hooked up the cable, the audio would automatically switch to my TV. Perfect.
Now, however, I'm having a different problem. The audio will stop working for apparantely no reason. I was just playing a movie on VLC with no problems. Went and did something else, came back and woke the computer from sleep and now the audio no longer works. When I open my audio playback devices I can see the levels moving, but I hear nothing. I reboot, unplug the cable from the laptop and the TV. Nothing works.
I think it may be a problem with the Intel Display Audio drivers because I've had this problem on another laptop before (with a standard hdmi out). On the old laptop I would uninstall drivers, reinstall, rollback, etc. Nothing would work. It would just all of a sudden decide to start working again.
I've been told elsewhere to uncheck any enhancements in the audio properties and to make sure that the selection under the advanced tab, "Allow applications to take exclusive control of this device" is unchecked as well. I still have the problem however.
This is incredibly frustrating. Does anybody know how to fix this issue? Thank you.

A Code 10 error is generated in Device Manager in one of the following situations:
- Device Manager can't start the device.
- One of the drivers that the device needs does not start.
- Device Manager has insufficient information to recognize the error that is bubbled up by the device driver.
To resolve the issue follow troubleshooting steps given in below link
https://support.microsoft.com/en-us/kb/943104

Similar Messages

Apple LED 24" Cinema Display audio problem under 10.6.8 (with post fix)

Hi all,
I'm using an Apple LED 24" Cinema Display with a 2010 MBP 15" and had been using 10.6.8 without problem. After installing the post-fix I now get static noice on (clipping?) when music contains lots of base. If I switch the output to my MBP's built-in speakers then the audio is fine.
Is there any way to un-install the 10.6.8 post-fix?
Thanks,
Yanik

Solved the issue. This issue coming up after installing the 10.6.8 supplemental update was just a considence. I ended up tracing the issue back to my Atlona AT-MDP21 Mini-DisplayPort KVM switch and after fiddling with cables the issue went away.

Intel display audio says this device cannot start Code 10

What is this code and how can it be corrected. When I look at the device manager it says:
This device cannot start. (Code 10)
STATUS_DEVICE_POWER_FAILURE
Help

A Code 10 error is generated in Device Manager in one of the following situations:
- Device Manager can't start the device.
- One of the drivers that the device needs does not start.
- Device Manager has insufficient information to recognize the error that is bubbled up by the device driver.
To resolve the issue follow troubleshooting steps given in below link
https://support.microsoft.com/en-us/kb/943104

Where can I download Intel (R) Display Audio driver for HP Compaq L2206tm?

Hi,
I am using an Elitebook 820G1 with an external monitor HP Compaq L2206tm.
The monitor is also not showing up in Sounds>Playback as of now.
But when it does show up in Sounds, it can play sound from the laptop.
Problem is sometimes after reboot or wake up from sleep, the monitor drops off from the Sounds panel.
I tried uninstalling Intel (R) display audio driver from Device Manager, and then do a scan for hardware changes to reintall the driver, I get a message "Device driver software was successfully installed."
May I know where can I download Intel (R) display audio driver for HP Compaq L2206tm / Elitebook 820G1?
And what can I do to keep the monitor stay on the Sounds panel?
Please help, I have googled endless with no results.

Thank you Paul.
I'm downloading the driver as I write.
Hopefully HP will update their page and correct the link soon

This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
Now I have no sound and this is the error message I get:
This device cannot start. (Code 10) Status Device Power Failure (for Intel (R) Audio Display)
under Sound, Vieo and Game Controllers in the Device Manager.
Anyone else having this issue after upgrading?
Getting a new lappy is stressful enough but to alreay have issues is ridiculous
If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
Thanks
Pam

Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

My imac intel display is frozen. Both the mouse and my network is working. Has anyone had problems like this and were you successful at fixing it?

My imac (Intel) display is frozen. Both the mouse and the network are working. I've shut down various times, pulled the cord from the receptacle on the power strip, and restarted several times. No luck. Has anyone had problems like this and were you successful at fixing it? Thanks. Would appreciate any help. Paula

Same problem, but a c.2009 iMac running OS X 10.9.1. Just happened overnight. Presently, I'm able to access my HD via wireless via laptop and copying all non-backed up files to an external drive. So far, Paula is the only other person I've found with this same problem and hers was three years ago! Going to keep searching for an answer.

Bootcamp Windows 7 HDMI audio problem

Hello,
I have problem sound over HDMI with my MBP late 2013 13'' model A1502 on Windows 7 with Bootcamp.
I've installed Windows following Bootcamp wizard from mac and creating bootable WIN7 usb with all support drivers on it. After this I've noticed that there is no sound on my tv when i connect it to my MBP. I've searched a bit more about this problem and I found that the latest graphics drivers might solve this problem so I've updated Intel® Iris™ Graphics 5100 directly from Intel's official web page and after the restart voila I have sound to my TV.
After some time I was configuring my resolutions and I unplugged the HDMI cable and then I put it back again and the sound stopped. At first I was thinking that it is something with the default audio device settings and when I went into the control panel audio settings I've noticed that the HDMI audio device is missing.
I've thinkered a bit and found out that when I unplug the hdmi cable in device manager's "Sound, video and game controllers" the Intel(R) Display Audio is removed from the list but when i put back the HDMI cable it dosent appear in that list. Instead of that in section System devices the High Definition Audio Controller have warning sign and have the following error message: This device cannot start. (Code 10).
You can check it on this image below:
However, when I reboot the MBP with the HDMI from my TV pluged into it it is all OK. So my guess is that it may be some driver service problem or some compatibillity problem with Cirrus Logic CS4208 (AB 93) audio controller. Currently it is working like this but It's very annoying to reboot each time when I wan't to connect it to my TV...
Any suggestions how to fix this problem are welcomed.
Thanks

reformat and zero your partition or chkdsk
make sure Windows has 15GB or more free space to work with
I have Macs and PCs all runnng 7 and even 8.
Maybe your iMac hard drive or even if SSD is where the fault lies.
boot from Widows DVD and check your system

IMac force select "Display Audio" when headphone jack is in use

I have a new 2012 iMac and Thunderbolt Display. I use the Display Audio from time to time, but also use a set of high quality speakers plugged in to the headphone jack.
Some applications, like Chrome (Google Hangout, Gmail phone calls) will default to using the Display Audio as the speaker. If I have the headphone jack in use (using the desk speakers), then the Audio System Preferences will NOT let me select the "Display Audio" device. It will immediately highlight "Headphone" again. The problem is if I want to change the "Display Audio" volume, I have to remove the cable from the headphone port, then change the audio, then plug it back in the headphone port.
It's quite annoying.
Is there any way to change this?
As a second request, is there an app that allows you to select which audio device applications will use? Like, if I wanted to change Chrome from using the Display Audio (not sure why thats the default anyway), or another application to only use the headphone port...

Hi,
The problem with the selection of the headphone port is something I reported to Apple back in October 2012. After some time, the reply came back that this was intended behaviour, and my bug report was subsequently marked as, "behaves correctly"! I agree with you that this is a pain in the backside and certainly appears to be bug-like behaviour. If you can take the time, I'd ask you to file your own bug report on this matter here. Perhaps it'll help cause a re-think. You should be able to log in with your Apple ID.
As for your second question: many people are asking this now. Rogue Amoeba made such a thing years ago, but it doesn't work on modern, Intel-based Macs. Maybe they'd consider updating it if enough people asked?
For Chrome, you can use ChromeLauncherWithExtraAudio - I've tried it and it works fine, though once you've changed the audio output on launch you have to quit and re-launch to change it again. If you want to choose where to send audio from movies, radio and so forth you could start using VLC, which completely ignores the system audio settings, and lets you choose from any connected audio outputs.
HTH
<Links Edited By Host>

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

[HELP] G470 HDMI audio problem

Hello guys! I'm currently using Lenovo G470 since 4 years and i discover that my HDMI audio is not working (but display is fine) my ATI is broke since 2 years ago and i'm using the UMA graphics on BIOS. i tried all the steps available on this forum (re-install the OEM chipset and integrated video/audio driver) and it didn't help at all. while investigating on ibmxHDMI folder of OEM driver C:\Drivers\Intel Onboard Graphics Driver\ibxHDMI>ls -a
. .. IntcDAuC.dll IntcDAud.cat IntcDAud.inf IntcDAud.sysAnd based from Installation_Readme.txt***************************************************************************
For Intel(R) Display Audio Driver:
1. Click "Start" then right click on "Computer" button and then click on
properties.
2. Click on "Advanced system setting" option and then click on "Continue"
in "user account control" window to goto "system properties" page
3. Click on "Hardware" Tab, and select "Device Manager"
button.
4. Double click on "Intel(R) Display Audio".
2. Select the "Driver" tab and then click on the "Driver Details" button.
3. The function driver (intchdmi.sys) version should be listed on this
screen.I should expect intchdmi.sys on exist on ibxHDMI folder. also OEM Driver: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g470-notebook/downloads/DS011506 [PS: Already checked the playback device and obviously i can't see HDMI output from there]

Some HDMI adapters won't work with the new MacBook Pros if they aren't compliant with the 1.1a version or later of the DisplayPort spec. There are some adapters out there that aren't fully compatible.
I believe you need to have i5 or i7 Macbook Pro for audio feature through mini displayport.
2011 models should have sound with proper adapter but I'm not sure about 2010 models.
Good luck

Sustained use of Cinema display audio results in noise, choppy audio, then cutting out

When I play a sustained audio stream through my 27" LED Cinema display – for example, listening to my music collection on iTunes – for a couple hours (since I powered on my computer), the audio suddenly gets very noisy and after a few seconds really choppy (+ noisy), and waiting another few seconds it's barely audible (just repeated hints of noise). After this happens, I can press Pause in iTunes, wait a few seconds, then press Play, and the audio is perfectly fine again.
Then, after only a half hour or less, the same thing happens, and I have to do the same thing to fix it. I am always able to fix the audio perfectly fine, but it inevitably craps out again after 5-30 minutes.
If I power off my computer or let it sleep overnight, then come back and play iTunes again, the audio will be fine for a few hours before this inevitably happens again.
I've followed the advice of an Apple support technician of resetting both my NVRAM and SMC, and that had no effect. The Cinema display audio continues to behave the same.
I have the USB for the Cinema display plugged directly into my MBP's USB port (no other USB hub in the way).
I have the latest version of OS X and thus the 27" Cinema Firmware 1.0 update has already been applied (I tried applying it by downloading the firmware update manually, but it refused, saying I do not need this update).
This should go without saying, but this never happens when I play music through my MBP's built-in speakers, or when I play music through external speakers plugged into the line-out port. It's behaviour that happens exclusively through the 27" Cinema display's audio interface.
Thoughts, anyone?
I'm especially curious whether anyone else has had precisely this kind of audio problem with their 27" Cinema display. I've seen many people post audio issues relating to their 27" Cinema display, but most of those problems were remedied by the 1.0 firmware update, and besides none of the problems were described quite like mine (specifically, audio that becomes noisy, then mostly cuts out - it never completely cuts out - and that can be reliably [temporarily] fixed by pausing and playing the audio again).

Can an MBP Sound preferences output to the display as opposed to through usb? I use a mac pro and have those two choices for my mini-displayport 27" apple display.
I am not suggesting this as a fix but only testing various other paths to try to diagnose the problem.
What first came to mind in your description was that you are having some kind of temperature problem. And I think the temp problem lies with the MBP and not the display. To that end you might consider adding one of the temp monitor utilities like iStat Pro, iStat Menus, Temperature Monitor, Temperature Monitor widget, Hardware Monitor, etc. See if there some correlation with the temps shown in some of the readings and your sound problem.

Satellite L40-14F - Display settings problem

Hi,
I have Toshiba Satellite L40-14F with Intel GMA X3100 video card.
I have display settings problem, I can't change screen resolution and color quality when video card drivers are installed, screen resolution is 800 by 600 pixels and color quality is lowest 4 bits, when i uninstall video card drivers can change it. I try to install other drivers, there are the same problem :( Please help me :)
Regards

I updated BIOS then install video card drivers and it works :)

Complaint regarding the Audio problem in handset

Dear Sir / Madam
I am having BlackBerry 8520 Curve and purchased it on May'10. After buying this BB handset I am facing the problem in audio and not able to listen the voice clearly. I had submitted my handset for 4th time at Redington India Limited Ahmedabad for the same issue, but the problem is yet not rectified.
I have submitted my handset again at Redington on 26th July 2012 and they have given me the estimate of Rs. 4200 to change the housing of the handset. Before that I have given my handset at Redington for the same audio problem on 14th Mar 2012, 16th Jan 2011 & also give while the handset was in warranty period, but the problem is still same.
Now my question is that, I have give mobile 4 times for same issue and still I am facing same problem than why should I pay for housing, as it is manufacturing fault of handset. Still my mobile is at Redington and I want the permanent resolution for the audio problem, and if you are not able to solve the problem than please keep the handset with you, as I don't want the defective handset.
I have purchased the Blackberry as it is the brand name and for the service but I am really disappointed by such kind of worst service.
Name: Nilesh
Contact No: ***
Work Order No: ***
Case ID: ***
Model: Blackberry Curve 8520
IMEI No: ***
Pin No: ***
Given at Redington on: 26th Jul 2012.
Please find the above details of handset and contact no, and I expect the positive response from your side. If the problem will not get rectified I will have to go for the legal action against the Blackberry and will also mention this issue on Facebook so another people also come to know about the services of Blackberry.
With Regards
Nilesh
Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
As a user-to-user community, no one here can answer your question with any level of authority whatsoever; this site is not a channel for any formal communications with RIM. Further, RIM provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user.
So, your escalation path is not here, in these forums. Rather, it is through the places you already are working with...even if they may have a poor reputation. You have no free path by which to bypass them.
There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
http://us.blackberry.com/support/programs/technical/incident.html
There also might be some good reading here:
http://us.blackberry.com/legal/handheld-limited-warranty.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Vista SP1 clash with Intel display driver (lgdkmd32.sys)

The ThinkPad X61s and various versions of the T series come with a version of the Intel display driver (lgdkmd32.sys) that is incompatible with Vista SP1. If we have that driver, Windows Update won't give us SP1. And no newer driver for the X61s seems available. Any news on when we can expect a fix for this problem?
Message Edited by O_Govinda on 03-26-2008 03:13 AM

Yes, same problem with my T61 because the version of display driver (lgdkmd32.sys) is 7.14.10.1329, which falls in the following range of Intel Display drivers that Microsoft would not offer Vista SP1 to systems with such device drivers.
Display drivers
Intel Display
• For x86-based computers: Igdkmd32.sys – versions between and including driver 7.14.10.1322 and 7.14.10.1403
• For x64-based computers: Igdkmd64.sys – versions between and including driver 7.14.10.1322 and 7.14.10.1403
Please refer to http://support.microsoft.com/?kbid=948343 cause 5 and method for cause 5 for more details.
Hope this problem will be solved soon.

X220 Intel Display Audio problem

Similar Messages

Maybe you are looking for