X220 Mobile Broadband - how to get it working

I have an X220 with Fedora 15 (2.6.40 kernel) and I am unable to get integrated Mobile Broadband working. Does anyone have this working and/or know the special magic required to get it working?

Is this the first time you are trying to use fedora with mobile broadband? If so check out the supported devices list on fedora project page.
http://live.gnome.org/NetworkManager/MobileBroadband
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

I have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

i have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

OK. T-Mobile is NOT owned by AT&T... yet... The deal hasn't gone through yet. T-Mobie's US network is not compatible with the iPhone. Lots of things don't work right. There is not, and never has been an unlocked 3G sold in the US. Don't know where the phone originated, but more than likely it was in the US. If that's the case, the phone has been hacked/jailbroken to get it to work.
Have you tried doing a restore or restoring the phone as new? I have to warn you, if you do so and the phone is hacked/jailbroken, it will re-lock to AT&T and will become unusalbe. I think your best bet right now might be to save yourself a lot of grief and just upgrade to new phone from a legitimate source.
I would never even consider buying an iPhone on ebay. 99% or more are hacked, jailbroken and/or stolen.

TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?

This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

Ive just upgraded to Mountain lion, I was using Safari and tried to use iCloud tabs. When I open it up there are no tabs there, anyone have any ideas on how to get it working?

Ive just upgraded to Mountain lion, I was using Safari and tried to use iCloud tabs. When I open it up there are no tabs there, anyone have any ideas on how to get it working?

Can you check system update? I think I did a system Update 1st, a day before installing OSX Lion and there is a Safari update. If not try logging in iCloud.

I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages. How to get it working?

I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages.
How to get it working?

My guess is that you won't be able to do much if you threw away the serial number before using it. The serial number will not have been externally visible on the box though... doing that would make it available for use by anyone who sees the box in any store.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
If you remain unable to locate the serial number you might need to head back to wherever you purchased the product to confirm whether or not you might have thrown out the serial number or if it could even possibly have never been provided.
Beyond that you need to resolve serial number issues with ASdobe Support directly. Here is a link for chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

I guess but that was what I was on earlier but it wasn't of much help.
I need to chat with an apple person but don't know how if I don't have a phone accessible.
Is there a way to connect thru a laptop or something?

How to get a work roster into ical

Hi there
Does anyone know how to get a work roster into ical so I can then sync it with my iphone and view my roster on my phone?
Any help would be greatly appreciated.
All the best
Enigma

Depends on the format of the "work roster" - if it's a calendar file, you can import it with File menu > Import. If it's some other file type, you may not be able to import it and need to enter the events manually instead.
You might try the iCal forum.

How to get QTP11 work with FF17. Unable to get Quicktest Proffessional11 plugin

How to get QTP11 work with FF17. I have already installed Patch_090 and 0122.
Unable to get Quicktest Proffessional11 plugin even after creating temp directory, into FF “extensions” directory.
Please help

If I may ask is there a recommended version of Firefox for the extension? [http://www.qatutorial.com/files/QTP_Install_Guide.pdf] is all I could find on how to install the software, is this the right add on?

Satellite L450D 11X - How to get WLAN working again?

Hello,
I've recently had problems with my 4 year old L450D 11X machine with everything slowing up.
I seem to have sorted this problem by reinstalling Windows 7.
Now I can only get access to broadband via an Ethernet cable. I've downloaded the Realtek RTL802E/8103 Drivers and run them to see if that will solve the problem, but it didn't work.
I'd be grateful for any suggestions to how I can get the wireless connection back.
Thanks

Thank you for your reply.
I managed to get it working again after downloading a further Realtek Driver which was highlighted as missing in one of the systems files.
I had tried the F8 key before but with no luck.
I had had a problem with the machine for a couple of months and had restored factory settings a couple of times, but it kept slowing up.
So I then got hold of another copy of the Windows 7 and that so far has worked except for the problem with the broadband access.

W510 Mobile Broadband How-To?

Greetings,
I just got a W510 and noticed the SIM card slot on the back, under the battery.
I put the SIM card from my cell in, and booted back up - but I didn't see any options for the mobile broadband.
So how the heck does this whole setup work?
I didn't see a user manual with the laptop.

ao125, welcome to the forum,
not all W510 system have integrated WWAN, maybe yours doesn't? It may however be upgradeable. If you enter your Type and Model Number on this site (right column in the box for select your system), you will then be presented with a description of your main components and be able to see if it has WWAN, is upgradeable or doesn't have it.
If you are unsure, post your type and model number here and other members will surely be able to help. Please do NOT post your s/n. If the model number ends in CTO there should be another number underneath the CTO, please post that.
Regards
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How to get passwords working in Pages documents?

I've set a pages document to require a password to open. When I open the file, it opens without requiring this password. Any thoughts on how to get the password working? The doc is on icloud, could that be a factor?

Finally, I've added a new field movement in transaction GCF2 with sender tables ACCHD, ACCIT_GLX AND ACCCR. The joint venture name comes only from FI documents and not JVA documents, so, only JVA information of P&L accounts is available.
Best regards,
Alfredo Del Portillo

Is fast boot not working for you? This is how you get it working correctly...

Ok so after two days of trying to register on this site, the 50th activation email finally worked...
Anyway I was trying to figure out why fast boot wasn't making much of a difference it seemed like once it booted quick but may have just been random. My setup is Z77a GD65 with two Samsung 830 128GB in RAID 0.
It was taking about 30 seconds from pushing the power button to getting into windows and that was with fast boot enabled. That did not seem right. After messing around for a while and researching I came across many mixed reviews about doing this or doing that. Windows 8 Feature... The windows 8 feature is from my understanding and research for secure boot...
If your just wanting the faster boot times using fast boot. Just enable MSI Fast Boot, and install the Fast Boot utility so you can get back into the bios. When you enable fast boot, this disables usb devices etc so you can't get into the bios when booting. This little utility is really useful as it will boot you from windows right into your bios etc. KEEP READING STILL NEED TO DO MORE!!!!!
Now for fast boot to work correctly you need to make sure you installed windows 8 in uefi mode. I read a couple people ask this question but I don't think they got the right answer or people just said yea I have a uefi motherboard and windows 8. That is not what people have been asking you.
To get this working correctly format a flash drive using rufus while choosing your win 8 iso.
You can get that here and it explains it and the settings to choose. I had to break up the link as the forum would not let me post the link. Maybe a mod can fix the links.
eightforums .com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html
After that is done you should then see in the bios a boot option for a UEFI usb flash drive. Make sure your boot mode is using UEFI. Otherwise it will be using legacy mode and not show uefi devices. I selected UEFI only just to make sure. Then choose this uefi flash drive as your first boot device and save and reboot to install windows from this uefi flash drive.
It should look like this
Once your at the install screen delete your partititons from the drive you are going to install windows on. So that it is unallocated. Then select new and apply. This will create 4 partitions. Here is a nice quide for doing that and explains it all. eightforums .com/tutorials/2328-uefi-unified-extensible-firmware-interface-install-windows-8-a.html
Basically your partitions should look like this.
Once you have installed windows you will then know if you installed in uefi as your splash screen will be different. Instead of just the MSI splash screen you will then see the windows loading square/circle as well on this same splash screen. You will now have a boot option called UEFI Windows Boot Manager. Select that one as your first boot device and then enable MSI Fast Boot.
Sorry if this post is cluttered I will add some more pics and clean it up in a bit. It's really early.

Quote from: RemusM on 22-February-14, 01:41:27
If one SSD fails, you lose the data on both SSDs.
In your case, you lose 128 GB.
Period.
You continue to argue on silly things and you miss the main point:
RAID 0 on SSDs does not make any sense.
RAID 0 (striped volume) has been designed for spinners.
It's a workaround to reduce the access time (a few miliseconds) caused by the mechanical parts of the HDD.
For a SSD (with a few microseconds access time) does not bring any boost.
http://www.tomshardware.com/reviews/ssd-raid-benchmark,3485-10.html
On contrary: shorter lifetime for both SSDs
So (for the last time) the best solution in your case is:
Put the OS on the first SSD (drive C) and the other programs/games on the second one (drive D).
There is no need to kill both SSDs at the same time (for nothing).
And finally, talking about this silly "fast boot" of yours:
5,10,20, or 30 seconds is something irrelevant.
Simply because you get the max speed on an "empty" OS only.
With every installed app (most of them come with bloatware anyway), your boot time is getting longer and longer.
On the other hand, who cares if it takes 10 or 20 seconds?
Only someone with mental problems needs to boot up the computer all day long.
99.99% of the users boot up the computer once or twice per day.
From my point of view, this topic is closed.
You're free to think and do anything you like.
I take it you are extremely hard headed and only view this from your opinion. Even with your logic of "If a drive fails you lose 128GB of data is wrong." If a drive fails I would lose 256GB of data if the RAID was full...
The way you originally worded it made it sound like you thought RAID 0 only uses the capacity of one drive... I was trying to clear that up by saying it uses the capacity of both drives and ends up being 256GB capacity but I guess you couldn't wrap your head around what I was trying to say.
Think what you want... but everyone I know on all of the tech forums I have been on for years, "EVGA, HARD, etc" 99% of users prefer running OS in RAID 0 on SSD's. Anyone with half a brain does not store important files on a RAID 0 array. I even created a new thread on EVGA asking how members prefer installing Windows with two identical SSD's. Most of them said they always run a RAID 0 for OS on SSD's. A couple others said they prefer running Windows/Programs on one SSD, and Games on the other. Usually that is because when they reformat they can simply re initialize the steam directory on the second SSD and then you don't have to reinstall all of your games.
I respect your opinion but saying RAID 0 on SSDs does not make any sense is crazy talk. And that fast boot is only for people with mental problems lol... you sir have issues. Why do you think they made this feature? Why do people OC? A lot of people do it because it is fun, they are enthusiast, and they like to push a system. Why do people buy SSDs if its only a few seconds faster when you only turn on your computer once twice a day? When you only open an app or launch a game a couple times a day.

How to get xbar working?

I have kdemod 4.2 and I can't get Xbar working with Bespin. All I get is an X icon saying Cannot find requested component : xbar

pressh wrote:Have you compiled bespin against kde 4.2 or was it compiled against an earlier version?
Ok.. I guess an earlier version.. How do I get the latest bespin?

HT3529 I've never been able to use iMessage or FaceTime and its really making me mad...any idea how to get it working?

I've had my iPod for over six months and I haven't been able to access FaceTime or iMessage...not to mention my camera stopped working for no reason!

For the camera problem try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order
For FT and Messages:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
How to get started with iMessage | How To – CNET
iOS 5: iMessage not working – how to fix - Apple Toolbox
Also:
- Go to Settings>General>Time&Date and make sure it is set to Automatic
- Go to Settings>wifi>the connected network and change the DNS to Google's 8.8.8.8
- Settings>General>Reset>Reset Network Settings. You will have to reenter all network passwords.

BI Beans 9.0.4 - How to get it Working

Hello ... Hoping this is not an old boring issue, i hereby give some advice on how to get the Oracle 9iR2 database with OLAP option and BI Beans to work.
I had dificulties with this subject for two weeks now, I asked for help on all forums and I thank everyone for their patience.
Here goes:
1. Install Oracle 9iR2 (9.2.0.1) Enterprise edition.
2. Download and apply the 9.2.0.6 patch, available on metalink.
3. Follow carefully the pre and post install instructions for the patch, in the readme file.
3. Install Oracle 10g(9.0.4) JDeveloper just by unpacking the contents of the zip (available on OTN) in a folder (D:\OraDS let's say).
4. Install the Oracle 9.0.4 BI Beans, using the Universal installer and specifying a new Oracle Home exactely in the folder where Jdeveloper was installed (d:\OraDS).
5. Install the BIBDEMO schema by running
bibdemo.bat %ORACLE_HOME%\oradata\Database_name
6. Run the test to check if everything's allright
d:\OraDS\bibeans\bi_checkconfig\bi_checkconfig.bat -h hostname -po port -sid sid -u user -p password -qusing BIBDEMO/BIBDEMO as user/pass. If metadata retrieval is successful, then you have a running BIBDEMO schema.
OK ... now, assuming you have some business intelligence problem of your own, you might want to create your own schema. This is where I ran into another load of problems.
My advice is to sudy the contents of the sql files in the bibdemo schema and do exactely the same stuff for your own.
You will find it easy to create dimensions and cubes using the wizard.
BUT, if you do anything wrong, not only your metadata won't work, but it will also ruin BIBDEMO.
After creating your own objects, you have to run
exec cwm2_olap_metadata_refresh.mr_refresh;
commit;
If you run bi_checkconfig you will see the metadata unable to be retrieved. In JDev it will result in strange errors like <<Although it successfully connected to the database, the metadata couldn't be retrieved>> ... or something, or simply in not being able to see your measure folders when you try to make a presentation or graph.
Also, cube viewer will again show the "infamous bell error", although it works for the BIBDEMO ANALYTIC CUBE after completing the 6 steps I described.
The fact is that all the errors are not product related, but simply the result of creating incorrect OLAP objects and refreshing the metadata using an user that has OLAP_DBA role, thus spoiling all metadata, including BIBDEMO's.
I spent some time studying their schema, and I found something very interesting, which I thing is a mistake. All my tables (and also the fact table) had primary/foreign keys of the NUMBER type. I transformed all the primary keys in my tables in VARCHAR2, ran the metadata refresh procedure again, and everything worked. Don't forget to create a measure folder and add your own measure there, and after that ... way you go. You will see them in JDev, and you will be able to do all kinds of graphs or crosstabs with amazing ease. Pretty slow though, I reccomend at least 512MB of RAM, an strong processors.
Please advice me if I was wrong with turning the keys from NUMBER to VARCHAR, perhaps there was another way around, but I don't know. Also, if there are any instructions, post them here.
Thanks.

I remember this being an issue with 92041 but was supposed to be fixed in 9205 and I think we tested it worked okay. So, it could be that 9206 has reintroduced the problem? I would recommend logging a bug with Oracle Support because you should be able to create dimension keys based on numberic keys.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

X220 Mobile Broadband - how to get it working

Similar Messages

Maybe you are looking for