X220 screen size from a programmer's perspective

Hi all,
I was just wondering, how good/ bad is the X220's 12.5" screen size from a programming perspective? Is the small size + IPS worth it?
My problem is that I want to try it out before buying it. Does anybody know a store in the GTA (Greater Toronto Area) where I can go and see a X220 in real-life? Thanks!

I'm a software engineer and do a lot of programming on my X220. The screen is acceptable for programming but not ideal. The 12.5" size isn't a problem -- the issue is the low 1366 x 768 resolution. You can't display many lines of code in a height of only 768 pixels, and with an IDE such as Visual Studio it's awkward dealing with multiple windows and panels in a low resolution screen. However, the X220 works well for programming if you attach an external monitor.
If you can't find an X220, just try any laptop with 1366 x 768 resolution (there are many). It is the screen resolution, not the physical screen size that is the real issue you'll have to deal with.

Similar Messages

How to shrink Virtual PC screen size from full screen

How to shrink Virtual PC screen size from full screen?

Nobody out there has a solution to this?

Determining My screen size from preferences

Hi I am trying to determine what kind of screen size I have on my macbook pro from within the "about this computer" option in preferences.
I know it sounds dumb and could just measure with a ruler ( which I did ) but it came up as 14 inches and there is no macbook pro that's 14 inches it's either 15 or 13 inches
How can I determine my screensize from a preference option ?
thank you
Here's the macbook I have
Macbook pro laptop 2.4 HGz Intel Core 2 Duo running Mac Os 10.5.8
Thanks

The ruler works, but you have do measure the diagonal, not the edge. If you do the diagonal from the inside corners of the bezel (frame), you get pretty close to the correct size.
My 15.4" MacBook Pro measures 14" to the outside edges of the display so, if that's how you're measuring, you also have the 15" version.

Increase screen size from 800x600 to 1024x768

Our Director program uses 800x600 resolution screen on all our files. The program was designed for 800x600. All Dir files are that size. These days a lot of laptops are using much larger screens. Is it possible to create a projector or some function that allows the entire programs to be enlarged (maximized) or magnified to for example, 1024x768 ?
When the user chooses the enlarge the screen size or magnify the size that function should be clicked and all DIR files in the program should appear in 1024x768 size. If the user wishes to go back to the original size (800x600) they click the button to use the program in the original size?
Can this be done? Does it need to be done using a projector ? or can we embed this function in one of the opening Dxr files (the DXR file that the EXE throws you after they open the projector (exe)
Thanks
Adam

Adam did you know that the adobe forums has a search function!
see the box [Search Communities]
This question has been asked, and answered many times before.
search for..... _movie.stage.drawRect = _system.deskTopRectList[1] & _movie.stage.rect = _system.deskTopRectList[1]

Is it possible to MANUALLY change Display Resolution (screen size) HELP!!

Forgive me if this has been covered already, but I have tried to look here and
there for an answer
My screen for my iMac-G4 blew out long ago, I had a another screen (a Dell CRT-
flatscreen) hooked up and IT blew out a few days ago, I just bought an LCD
flat screen, but it needs a 1680 x 1050 resolution (WIDE screen(?)and my
iMac-G4 only goes to 1024 x 768 in the "Display" controls. So all my desktop
images are "scrunched" or "stretched".
So is there a "MANUAL" way of configuring the screen size to a "standard"
size within this Mac? or do I need to find a standard size screen?
. . . HELP!!!
You can also write me (preferably at) at:
[email protected]
I VERY MUCH appreciate any help- please realize too, that I am an IDIOT when it
comes to computers, I just paint on this thing (as part of my job as a freelancer
on the side), and WAS in the middle of a job for a client
Thanks again,
-MAVIII

Hello and Welcome to Apple Discussions.
Apple limited the graphics cards in iMac G4s to the native resolution of the built-in LCD i.e:
15" iMac G4 - 1024 x 768
17" iMac G4 - 1440 x 900
20" iMac G4 - 1680 x 1050.
Even when connecting a second display this could only mirror the internal at the same resolution. For the following iMac G4's it's possible to install a firmware hack to open up the full capabilities of the graphics cards:
17" 800MHz
17" 1GHz
15" 1GHz
17" 1.25GHz
20" 1.25GHz
using an application called Screen Spanning Doctor. This is risky but I guess you haven't got much to lose at this point. I've only ever heard of one Mac user actually failing to do the process right though.
You can always use Firewire Target Disk Mode to recover you client's files to another Mac.
I'd be interested if SwitchResX works too. I only have external displays much smaller than my iMacs so can't test it from that perspective.
cheers
mrtotes

Satellite A300 PSAG0A - Games Will Not Display in Full Screen Size

I have a large number of games installed on my computer. At least 90% of them will not display in full screen size but display in a small window with a large amount of black screen surrounding the window. I am running Windows Vista Home Premium 32 bit. However, I do not think it has anything to do with Windows as my husband runs the same games on his Toshiba Satellite L300, running exactly the same version of windows, and they all display in full screen size.
Altering the screen resolution makes no difference. And, of course, I do select the full screen option in the games.
Also, sometimes when I have been playing a game and then closed it I find that my desktop picture has shrunk to the smaller size - the same size as the window in which the game was displayed when I was playing it.
The games work fine in every other way, it is only this small screen size which is driving me nuts.
I hope that someone can help me with this!!

Yes, as far as I can tell I have the latest driver. But, even this is confusing to me because....
My graphics media accelerator is Mobile Intel(R) 965 Express Chipset Family. The installed driver version is 7.14.10.1329. The release date for this is 2007-09-13, as far as I can tell from web searches.
However, on the Toshiba website for driver downloads, the available driver version is 8.2.0.1012 PV. The date is 2006-12-28. I have downloaded this driver and attempted to install it. I get the message that it has been installed but, after rebooting and checking the installed driver version is still 7.14.10.1329.
Perhaps, the 8.2.0.1012 PV version does not actually install because it is older than the currently installed version. I would have thought that the driver version with the higher number would be the newer one, but perhaps this is not the case as the dates do not seem to support this theory.
So now I ask myself, firstly, if the driver available for download on the Toshiba website is not the newest one, then why is it there?
Secondly, if it is the newest one then why will it not install on my computer?

IBook 14" to MacBook 13" screen size

I am moving from a 14" iBook to the 13" widescreen MacBook. How do the two compare? Does the widescreen make up for the smaller overall screen size. I don't want to downgrade on size, as the 14" iBook is barely large enough.
The computer is used for basic Word, Excel, Internet, email, but lots of screens open at the same time.
Will it be OK???
FB

I made th exact same upgrade and initially shared your concerns, however I can say confidently that they were wholely un-founded. The higher resolution screen of the macbook provides more screen space in a smaller area than did the ibook. The biggest difference for me was the brightness though, soo much brighter than the ibook; I hardly ever turn it up past half way!
The other posters are correct about expose though, I find i an invaluable tool. I also make use of virtuedesktops:
http://virtuedesktops.info/
It works perfectly to give you more useable screen area.

The green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
MacBook

How do I set the screen size of my site?

Hey guys making a site for a friend and I'm not sure on how I go about setting a screen size that can be viewed on varying screen sizes like 1280x800 and up. At the moment on my 1920x1080 display it looks fine but when I open it on her MacBook Pro (1280x800) it is cut of by half and my website has some fixed anchors which I do not allow scrolling so you are kind of stuck.
Thanks to anyone that can help, can't find a tutorial anywhere

In the normal state the screen on an iPad will rotate depending on which side is up. Any of the four sides can be up or on top and the display will look correct. But if you want to lock the display in one orientation you can. Swipe up from the bottom of the screen to reveal the Control Center. Then tap on the Orientation Lock icon. That's the icon of the small padlock surrounded by a circular arrow. That icon will appear at the top right of the display and the screen will no longer rotate. Repeat the same procedure to unlock orientation.

How do i make this page adapt to all screen sizes???

if i copy and paste my index code can someone please tell me if theres anything i can add so it will adapt to all screen sizes??
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Nicola Campbell Photography</title>
<style type="text/css">
#apDiv1 {
          position:absolute;
          width:1001px;
          height:170px;
          z-index:1;
          left: 438px;
          top: 221px;
#navbar {
          height: 40px;
          width: 900px;
          margin-right: auto;
          margin-left: auto;
          border-top-style: none;
          border-right-style: none;
          border-bottom-style: none;
          border-left-style: none;
</style>
<script src="js/modernizr-2.5.2-respond-1.1.0.min.js" type="text/javascript"></script>
<script src="js/jquery-1.7.2.min.js" type="text/javascript"></script>
<script src="js/jquery.flexslider-min.js" type="text/javascript"></script>
<script src="js/jquery.mousewheel.js" type="text/javascript"></script>
<script src="js/jquery.easing.1.3.js" type="text/javascript"></script>
<link href="css/style.css" rel="stylesheet" type="text/css" />
<link href="css/flexslider.css" rel="stylesheet" type="text/css" />
<script type="text/xml">

</script>
<style type="text/css">
#apDiv2 {
          position:absolute;
          width:901px;
          height:49px;
          z-index:2;
          left: 487px;
          top: 51px;
          text-align: center;
          color: #FF99FF;
          font-size: 80px;
          font-family: HaloHandletter;
#apDiv3 {
          position:absolute;
          width:409px;
          height:56px;
          z-index:3;
          left: 768px;
          top: 96px;
          color: #999999;
          font-family: "Adobe Garamond Pro";
          font-size: 24px;
#apDiv2 div {
          font-size: 100px;
          font-family: HaloHandletter;
          color: #999999;
#apDiv4 {
          position:absolute;
          width:901px;
          height:449px;
          z-index:4;
          left: 451px;
          top: 202px;
#apDiv5 {
          position:absolute;
          width:848px;
          height:152px;
          z-index:11;
          left: 433px;
          top: 201px;
#apDiv6 {
          position:absolute;
          width:200px;
          height:115px;
          z-index:5;
          left: 1250px;
          top: 138px;
#apDiv7 {
          position: absolute;
          width: 891px;
          height: 42px;
          z-index: 5;
          left: 552px;
          top: 174px;
#apDiv8 {
          position:absolute;
          width:48px;
          height:50px;
          z-index:6;
          left: 102px;
          top: 51px;
#apDiv9 {
          position:absolute;
          width:49px;
          height:51px;
          z-index:7;
          left: 152px;
          top: 51px;
#apDiv10 {
          position:absolute;
          width:49px;
          height:49px;
          z-index:8;
          left: 202px;
          top: 51px;
#apDiv11 {
          position:absolute;
          width:52px;
          height:52px;
          z-index:9;
          left: 252px;
          top: 51px;
</style>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<meta name="Description" content="Welcome to Nicola Campbell Photography. I am based in Lancashire and specialise in Wedding Photography." />
<meta name="viewport" content="width=device-width" />
<link href="untitled.css" rel="stylesheet" type="text/css" />

<link href="iphone.css" rel="stylesheet" type="text/css" media="only screen and (max-width:320px)" />

<link href="ipad.css" rel="stylesheet" type="text/css" media="only screen and (min-width:321px) and (max-width:768px)" />

<link href="desktop.css" rel="stylesheet" type="text/css" media="only screen and (min-width:769px)" />
<style type="text/css">
#apDiv12 {
          position:absolute;
          width:1013px;
          height:648px;
          z-index:1;
          left: 321px;
          top: 299px;
</style>
</head>
<body onload="MM_preloadImages('navbaroriginalroll_r1_c1.jpg','navbaroriginalroll_r1_c2.jpg','n avbaroriginalroll_r1_c5.jpg','navbaroriginalroll_r1_c6.jpg','navbaroriginalroll_r1_c7.jpg' ,'navbaroriginalroll_r1_c8.jpg','navbar_r1_c4.jpg')">
<div id="apDiv2">
<div align="center">nicola campbell</div>
</div>
<div id="apDiv3">P H O T O G R A P H Y</div>
<div id="apDiv7"><a href="index.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('navbar','','navbaroriginalroll_r1_c1.jpg',1)"><img src="navbaroriginal_r1_c1.jpg" alt="c1" name="navbar" width="111" height="40" border="0" id="navbar2" /></a><a href="Aboutme.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image13','','navbaroriginalroll_r1_c2.jpg',1)"><img src="navbaroriginal_r1_c2.jpg" name="Image13" width="111" height="40" border="0" id="Image13" /></a><a href="Gallery.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image21','','navbaroriginalroll_r1_c5.jpg',1)"><img src="navbaroriginal_r1_c5.jpg" alt="c5" name="Image21" width="111" height="40" border="0" id="Image21" /></a><a href="Blog.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image22','','navbaroriginalroll_r1_c6.jpg',1)"><img src="navbaroriginal_r1_c6.jpg" alt="c6" name="Image22" width="111" height="40" border="0" id="Image22" /></a><a href="ContactMe.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image23','','navbaroriginalroll_r1_c7.jpg',1)"><img src="navbaroriginal_r1_c7.jpg" alt="c7" name="Image23" width="111" height="40" border="0" id="Image23" /></a><a href="Clients.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image24','','navbaroriginalroll_r1_c8.jpg',1)"><img src="navbaroriginal_r1_c8.jpg" alt="c8" name="Image24" width="111" height="40" border="0" id="Image24" /></a><a href="Weddings.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image25','','navbar_r1_c4.jpg',1)"><img src="navbar_r1_c41.jpg" alt="" name="Image25" width="111" height="40" border="0" id="Image25" /></a></div>
<div id="apDiv5">
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
      $('#slider').flexslider({
              namespace: "flex-",             //{NEW} String: Prefix string attached to the class of every element generated by the plugin
    selector: ".slides > li",       //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
      animation: "slide",
             easing: "swing",               //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
      direction: "horizontal",   //String: Select the sliding direction, 'horizontal' or 'vertical'
    reverse: false,                 //{NEW} Boolean: Reverse the animation direction
    animationLoop: false,             //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
    smoothHeight: true,            //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
      slideshow: true,                //Boolean: Animate slider automatically
      slideshowSpeed: 5000,           //Integer: Set the speed of the slideshow cycling, in milliseconds
      animationSpeed: 600,         //Integer: Set the speed of animations, in milliseconds
      initDelay: 0,                   //{NEW} Integer: Set an initialization delay, in milliseconds
      randomize: false,               //Boolean: Randomize slide order
             useCSS: true,                   //{NEW} Boolean: Slider will use CSS3 transitions if available
      touch: true,                    //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
       video: false,                   //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
      directionNav: true,             //Boolean: Create navigation for previous/next navigation? (true/false)
      controlNav: true,               //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
      keyboard: true,              //Boolean: Allow slider navigating via keyboard left/right keys
      mousewheel: false,              //Boolean: Allow slider navigating via mousewheel
      prevText: "Previous",           //String: Set the text for the "previous" directionNav item
      nextText: "Next",               //String: Set the text for the "next" directionNav item
      pausePlay: false,               //Boolean: Create pause/play dynamic element
      pauseText: "Pause",             //String: Set the text for the "pause" pausePlay item
      playText: "Play",               //String: Set the text for the "play" pausePlay item
      startAt: 0,                //Integer: The slide that the slider should start on. Array notation (0 = first slide)
      pauseOnAction: true,            //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
      pauseOnHover: true,            //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
      start: function(){},            //Callback: function(slider) - Fires when the slider loads the first slide
            controlsContainer: "",          //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is                                                             not found, the default action will be taken.
       manualControls: "",             //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
       // Carousel Options
    itemWidth: 0,                   //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
    itemMargin: 10,                  //{NEW} Integer: Margin between carousel items.
    minItems: 0,                    //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
    maxItems: 0,                    //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
    move: 0,                        //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
            before: function(){},           //Callback: function(slider) - Fires asynchronously with each slider animation
      after: function(){},            //Callback: function(slider) - Fires after each slider animation completes
      end: function(){}               //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
      $('#slider').flexslider({
              namespace: "flex-",             //{NEW} String: Prefix string attached to the class of every element generated by the plugin
    selector: ".slides > li",       //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
      animation: "slide",
             easing: "swing",               //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
      direction: "horizontal",   //String: Select the sliding direction, 'horizontal' or 'vertical'
    reverse: false,                 //{NEW} Boolean: Reverse the animation direction
    animationLoop: false,             //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
    smoothHeight: true,            //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
      slideshow: true,                //Boolean: Animate slider automatically
      slideshowSpeed: 5000,           //Integer: Set the speed of the slideshow cycling, in milliseconds
      animationSpeed: 600,         //Integer: Set the speed of animations, in milliseconds
      initDelay: 0,                   //{NEW} Integer: Set an initialization delay, in milliseconds
      randomize: false,               //Boolean: Randomize slide order
             useCSS: true,                   //{NEW} Boolean: Slider will use CSS3 transitions if available
      touch: true,                    //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
       video: false,                   //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
      directionNav: true,             //Boolean: Create navigation for previous/next navigation? (true/false)
      controlNav: true,               //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
      keyboard: true,              //Boolean: Allow slider navigating via keyboard left/right keys
      mousewheel: false,              //Boolean: Allow slider navigating via mousewheel
      prevText: "Previous",           //String: Set the text for the "previous" directionNav item
      nextText: "Next",               //String: Set the text for the "next" directionNav item
      pausePlay: false,               //Boolean: Create pause/play dynamic element
      pauseText: "Pause",             //String: Set the text for the "pause" pausePlay item
      playText: "Play",               //String: Set the text for the "play" pausePlay item
      startAt: 0,                //Integer: The slide that the slider should start on. Array notation (0 = first slide)
      pauseOnAction: true,            //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
      pauseOnHover: true,            //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
      start: function(){},            //Callback: function(slider) - Fires when the slider loads the first slide
            controlsContainer: "",          //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is                                                             not found, the default action will be taken.
       manualControls: "",             //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
       // Carousel Options
    itemWidth: 0,                   //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
    itemMargin: 0,                  //{NEW} Integer: Margin between carousel items.
    minItems: 0,                    //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
    maxItems: 0,                    //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
    move: 0,                        //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
            before: function(){},           //Callback: function(slider) - Fires asynchronously with each slider animation
      after: function(){},            //Callback: function(slider) - Fires after each slider animation completes
      end: function(){}               //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
<div id="main-container">
    <p> </p>
    <div id="main" class="wrapper clearfix">
      
      <div id="container">
        <div id="slider" class="flexslider">
          <ul class="slides">
            <li> <img src="hollie.jpg" width="500" height="600" /> </li>
            <li> <img src="slider2.jpg" width="500" height="600" /> </li>
            <li> <img src="slider3.jpg" width="500" height="600" /> </li>
            <li> <img src="slider8.jpg" width="500" height="600" /> </li>
            <li> <img src="slider4.jpg" width="500" height="600" /> </li>
            <li> <img src="slider5.jpg" width="500" height="600" /> </li>
            <li> <img src="slider6.jpg" width="500" height="600" /> </li>
            <li> <img src="slider1.jpg" width="500" height="600" /> </li>
          </ul>
        </div>
        <div id="carousel" class="flexslider" style="display:none;">
          <ul class="slides">
            <li> <img src="hollie.jpg" width="500" height="600" /> </li>
            <li> <img src="slider2.jpg" width="500" height="600" /> </li>
            <li> <img src="slider3.jpg" width="500" height="600" /> </li>
            <li> <img src="slider8.jpg" width="500" height="600" /> </li>
            <li> <img src="slider4.jpg" width="500" height="600" /> </li>
            <li> <img src="slider5.jpg" width="500" height="600" /> </li>
            <li> <img src="slider6.jpg" width="500" height="600" /> </li>
            <li> <img src="slider1.jpg" width="500" height="600" /> </li>
          </ul>
        </div>
      </div>
    </div>
    
</div>

</div>

<div id="apDiv8"><a href="https://www.facebook.com/nicola.shulmancampbell?fref=ts"><img src="Retro-Facebok-Rounded-128.png" width="48" height="48" /></a></div>
<div id="apDiv9"><img src="Retro-Flickr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv10"><img src="Retro-Tumblr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv11"><a href="https://twitter.com/nicola_shulman"><img src="Retro-Twitter-Rounded-128.png" width="48" height="48" /></a></div>
<script type="text/javascript">
$(window).load(function() {
      $('#slider').flexslider({
              namespace: "flex-",             //{NEW} String: Prefix string attached to the class of every element generated by the plugin
    selector: ".slides > li",       //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
      animation: "slide",
             easing: "swing",               //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
      direction: "horizontal",   //String: Select the sliding direction, 'horizontal' or 'vertical'
    reverse: false,                 //{NEW} Boolean: Reverse the animation direction
    animationLoop: false,             //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
    smoothHeight: true,            //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
      slideshow: true,                //Boolean: Animate slider automatically
      slideshowSpeed: 5000,           //Integer: Set the speed of the slideshow cycling, in milliseconds
      animationSpeed: 600,         //Integer: Set the speed of animations, in milliseconds
      initDelay: 0,                   //{NEW} Integer: Set an initialization delay, in milliseconds
      randomize: false,               //Boolean: Randomize slide order
             useCSS: true,                   //{NEW} Boolean: Slider will use CSS3 transitions if available
      touch: true,                    //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
       video: false,                   //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
      directionNav: true,             //Boolean: Create navigation for previous/next navigation? (true/false)
      controlNav: true,               //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
      keyboard: true,              //Boolean: Allow slider navigating via keyboard left/right keys
      mousewheel: false,              //Boolean: Allow slider navigating via mousewheel
      prevText: "Previous",           //String: Set the text for the "previous" directionNav item
      nextText: "Next",               //String: Set the text for the "next" directionNav item
      pausePlay: false,               //Boolean: Create pause/play dynamic element
      pauseText: "Pause",             //String: Set the text for the "pause" pausePlay item
      playText: "Play",               //String: Set the text for the "play" pausePlay item
      startAt: 0,                //Integer: The slide that the slider should start on. Array notation (0 = first slide)
      pauseOnAction: true,            //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
      pauseOnHover: true,            //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
      start: function(){},            //Callback: function(slider) - Fires when the slider loads the first slide
            controlsContainer: "",          //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is                                                             not found, the default action will be taken.
       manualControls: "",             //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
       // Carousel Options
    itemWidth: 0,                   //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
    itemMargin: 10,                  //{NEW} Integer: Margin between carousel items.
    minItems: 0,                    //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
    maxItems: 0,                    //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
    move: 0,                        //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
            before: function(){},           //Callback: function(slider) - Fires asynchronously with each slider animation
      after: function(){},            //Callback: function(slider) - Fires after each slider animation completes
      end: function(){}               //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
</body>
</html>

APDivs cannot be resized.
APDivs in primary layouts won't work in Responsive Web Design.
APDivs are a very poor layout method.
For this reason, Adobe removed APDivs from Dreamweaver CC.
Example of Fluid Grid Layout with floats & margins, no APDivs required.
http://alt-web.com/FluidGrid/Fluid2.html
Nancy O.

How can I find out the screen size of the users moniter using the Acrobat SDK?

How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
Gregory

Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory

Unable to switch screen mode from standard: PS CS5

Full screen with or without menus is grayed out in the view menu and the view dropdown selector from the menu bar. I have quit and re-entered PS and have reset all workspaces to default. I have checked that I'm working in 64 bit. I still cannot switch screen mode from standard. Last update was to 12.04. Last extension installed was photokit sharpener.
Thanks for any help. (PS, how do I reset preferences file on a mac?)
Cathy
Pertinent info:
Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x64
Operating System: Mac OS 10.6.7
System architecture: Intel CPU Family:6, Model:37, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 3200 MHz
Built-in memory: 4096 MB
Free memory: 2353 MB
Memory available to Photoshop: 3698 MB
Memory used by Photoshop: 69 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-1.6.26
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 5670 OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Renderer ID: 16915203
Video Card Memory: 501 MB

Ahh, I knew it was probably something simple. No I didn't have a doc open since I was just working with prefs and trying to set desktop color. Banging my head now on my desk. Bam! So dumb ...
Thanks so much for solving my problem.

I am not able to install screen-git from the aur

So yeah, i cant install screen-git from the aur. Im using yaourt.
┌─[yamifrankc]──(~)
└─| % > aur -S screen-git
==> Resuming previous build
==> Downloading screen-git PKGBUILD from AUR...
tar: Record size = 13 blocks
==> Last 5 comments ordered by date (asc):
Comment by: dolby on Tue, 16 Jun 2009 15:02:25 +0000
GNU screen shouldnt depend on libelf. Package in extra now doesnt.
See http://bugs.archlinux.org/task/14700
Comment by: dolby on Tue, 16 Jun 2009 15:03:08 +0000
Oh yeah, gpm isnt a dependency either.
Comment by: nihathrael on Tue, 16 Jun 2009 16:23:56 +0000
Thanks for the pointers. Package updated.
Comment by: firecat53 on Tue, 16 Jun 2009 23:19:28 +0000
At least for x86_64, libelf seems to be a dependency. Throws an error about libelf.so.0 when starting screen if it's not installed.
Comment by: Ranguvar on Sun, 11 Oct 2009 04:00:10 +0000
The three lines at the end of the install scriplet are unnecessary now and can cause problems apparently, please remove :)
Also, I cannot confirm libelf dependency, both by using ldd and trying removing libelf, so it should be kept out.
First Submitted: Sun, 09 Nov 2008 15:43:42 +0000
screen-git 20090616-1 : GNU Screen from GIT repository. Provides vertical splitting.
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>y
Please add EDITOR to your environment variables
for example:
==> Edit PKGBUILD with:(replace gvim with your favorite editor)
==> Edit screen.install with:vim
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of screen-git ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for screen-git:
==> Building and installing package
mkdir: cannot create directory `/var/abs': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/screen-git directory. Using /tmp directory
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> Determining latest git revision...
-> Version found: 20091204
==> Making package: screen-git 20091204-1 i686 (Fri Dec 4 07:43:16 CST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found screen.pam in build dir
==> Validating source files with md5sums...
screen.pam ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
==> Connecting to GIT server....
Already up-to-date.
==> The local files are updated.
==> GIT checkout done or server timeout
==> Starting make...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
configure: WARNING: unrecognized options: --with-sys-screenrc
this is screen version 4.1.0
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking for library containing strerror... none required
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for gawk... gawk
checking for a BSD-compatible install... /bin/install -c
configure: checking for buggy tools...
- sh is 'GNU bash, version 4.0.35(2)-release (i686-pc-linux-gnu)'.
- sed is 'GNU sed version 4.2.1'.
checking if a system-wide socket dir should be used... yes
checking for the socket dir... (eff_uid ? "/tmp/uscreens" : "/tmp/screens")
configure: checking for MIPS...
configure: checking for Ultrix...
configure: checking for butterfly...
configure: checking for POSIX.1...
- you have a POSIX system
configure: checking for System V...
configure: checking for sequent/ptx...
configure: checking SVR4...
checking stropts.h usability... yes
checking stropts.h presence... yes
checking for stropts.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
configure: checking for Solaris 2.x...
configure: checking BSD job jontrol...
- you have jobcontrol
configure: checking setresuid...
configure: checking setreuid...
configure: checking seteuid...
configure: checking select...
configure: checking fifos...
- your fifos are usable
configure: checking for broken fifo implementation...
- your implementation is ok
configure: checking sockets...
- your sockets are usable
configure: checking socket implementation...
- you are normal
- both sockets and fifos usable. let's take sockets.
configure: checking select return value...
- select is ok
configure: checking for tgetent...
configure: checking libcurses...
- you use the terminfo database
configure: checking ospeed...
configure: checking for /dev/ptc...
configure: checking for SVR4 ptys...
checking for getpt... yes
configure: checking for ptyranges...
configure: checking default tty permissions/group...
checking for write... /usr/bin/write
checking for xterm... /usr/bin/xterm
- pty mode: 0620, group: 0
configure: checking getutent...
configure: checking ut_host...
checking utempter.h usability... no
checking utempter.h presence... no
checking for utempter.h... no
configure: checking for libutil(s)...
configure: checking getloadavg...
assuming posix signal definition
configure: checking for crypt and sec libraries...
configure: checking crypt...
configure: checking IRIX sun library...
configure: checking syslog...
configure: checking wait union...
configure: checking for termio or termios...
configure: checking getspnam...
configure: checking getttyent...
configure: checking fdwalk...
configure: checking whether memcpy/memmove/bcopy handles overlapping arguments...
checking for long file names... yes
checking for vsprintf... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for setenv... checking for nl_langinfo(CODESET)... yes
checking for library containing gethostname... none required
checking for rename... yes
checking for fchmod... yes
checking for fchown... yes
checking for strerror... yes
checking for lstat... yes
checking for _exit... yes
checking for utimes... yes
checking for vsnprintf... yes
checking for getcwd... yes
checking for setlocale... yes
checking for strftime... yes
checking for PAM support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default commands
configure: WARNING: unrecognized options: --with-sys-screenrc
Now please check the pathnames in the Makefile and in the user
configuration section in config.h.
Then type 'make' to make screen. Good luck.
CPP="gcc -E -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"'" srcdir=. sh ./osdef.sh
AWK=gawk CC="gcc -march=i686 -mtune=generic -O2 -pipe" srcdir=. sh ./comm.sh
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe screen.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe ansi.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe fileio.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe mark.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe misc.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe resize.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe socket.c
In file included from socket.c:51:
extern.h:159: error: conflicting types for 'execvpe'
/usr/include/unistd.h:585: note: previous declaration of 'execvpe' was here
make: *** [socket.o] Error 1
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build screen-git package
Vertical split is ftw! What can i do to build it?

yeah, i also got that message.
for vertical split you can go for screen-vs package. this is screen with the vs patch.
http://aur.archlinux.org/packages.php?ID=6006

Screen Size

I am trying to watch a tv episode from the network website
and the screen size is too small. Is there a way to make it
bigger?

Are you askng about the iPad in your signature? If you are asking about a Mac computer, please tell us the model and what version of the Mac OS you are running.

Cannot adjust page width to fit to screen size on some PCs with IE

Hello friends, I am using APEX 4.0 and IE9 on different Windows 7 PCs . The page will go way off the screen to the right on one PC, and fits nicely inside the screen on another PC. This problem does not occur in Firefox on any PC. I have used Firebug to try to isolate the template or css settings. Using Theme_4, I have a breadcrumb region and 4 reports regions. One of the reports regions is in column 1 and 3 regions are in column 2. Display point is Page Template Body (3. Items above region content) for all the reports regions. The CSS is #themes/theme_4/css/theme_4_0.css. The template is One Level Tabs (Right Sidebar/Table Based). I tried various width="" using px and % under Edit Page Template-Definition-Body (see below). I tried style="width:800px" within the <div> tags. I have tried various other changes to theme_4_0.css and apex_4_0.css with no visible change to the page width on the obstinate PCs. I reset IE setting and deleted all personal settings on both PCs with no changes to either one, one fits on the screen and the other does not. The issue is that most of our users use IE so most of them will have to live with using the horizontal scroll bar to see the regions in column 2, unless we switch them all to Firefox (not a bad option, except that option works for our users only, we have no control over external browsers). I have tried suggestions from many discussion threads, as this problem has bothered us for quite some time. I know this is an IE problem, but any help is appreciated. Thank you.
"|" represents screen size and "-" is the regions/content for the "bad" PCs.
|----------|----------
The "good" PCs look like this:
|----------|
Peter
<div id="body">
<table class="tbl-body" cellspacing="0" cellpadding="0" border="0" summary="">
<tbody>
<tr>
<td class="tbl-main" width="100%">#REGION_POSITION_02##BOX_BODY#</td>
<td class="tbl-sidebar">#REGION_POSITION_03#</td>
</tr>
</tbody>
</table>
</div>

BD...
I think your concerns are very reasonable. But I want to sort of refocus things a little bit for you here... it's not really a PC vs Mac issue... Rather, it's specifically an Internet Explorer issue. And you might say that this is synonymous...still 98% of the world uses IE, and you would be correct. Hopefully when the final version of IE7 comes out, it will finally embrace some of the modern day OPEN web standards without trying to make too many standards of its own (this is Microsoft, though).
Anyways, in the meantime, I guess we all try to make the best of it. It's very easy to conclude that iWeb is not a viable tool for you, as long as you have something else to "fall back" on. With my limited knowledge of all things HTML, I have no such luxury. Instead, I have put up a notice on my site for IE users only that the site might not look its best on IE....this notice also encourages IE users to use FireFox, which is very much like Safari and will in 99% of cases display your iWeb pages just like you expect. You can see how I've done this here (but you have to surf from IE)... http://blog.dirtdoog.com
I think many people in the PC world understand the limitations of IE. Certainly many don't, but you have to consider your likely audience, I guess. I believe that your website content is king. If your content is compelling enough to your intended audience, they will jump through hoops to see it in its full glory....but you have to make them aware of the problem. That's why I have chosen to take the path that I have taken.
Let me know what you think.

X220 screen size from a programmer's perspective

Similar Messages

Maybe you are looking for