X230 bad quality keyboards - slanted, loose and bent keys

Hi folks, got recently a brand new X230 - so far, I'm quite happy with it except for the keyboard. The cursor keys on the first keyboard I got were slanted upwards on their left edge, as if the spring mechanic beneath them were aligned incorrectly, not right in size. The keys neither did fit entirely correctly and came loose. Then, after phoning with the support twice, sending pictures and arguing for a while, I got a new keyboard. Result: Quite the same lousy quality again: Cursor keys are slanted upwards on their left side (which is very irritating) very much like with the original keyboard, but this time they are at least not loose. Instead, the F9 key is now on its lower left edge bent upwards as if it was forced out of its mold when it was still hot and flexible - which looks pretty irritating, not to say broken. Technically, it is not loose, but it is only held down on three instead of four points, the lower left corner makes no contact to the mechanic beneath. Gaps between the keys are not aligned and irregular, and too close between F9 and F8 which might have caused this flaw during production. Moreover, ESC and DEL key are slightly tilted out of alignment (rotated inwards), probably also by forcing them out of their mold too early. Just saw a couple of Lenovo notebooks elsewhere (W-series IIRC) with the same keyboard, but good quality, so reasonably quality keyboards should at least exist in some place. I really don't want to argue with support anymore - they keep telling me it's only "an optical flaw". But folks, if I spend >1000€ for a notebook, I prefer "good quality", and not something that looks as if I found it in the grocery store next corner. Is there anything else to do? I'm tired of fighting with the support.

The older aluminum wired keyboards you have probably won't work with the newer Macs you have as these keyboards have a different version number.
Apple keeps revising these wired aluminum models and the older versions, at some point, do not work with new or newer Macs.
There is really no fixing these. They either work or they don't
Are you asking for a better Apple replacement keyboard?
Here is the Creme de la Creme of Apple replacement keyboards.
http://www.matias.ca/products/
Or look at Kensington or Macally for good Apple replacement input devices.

Similar Messages

  • I get bad quality like blurry videos and photos on internet

    Whenever i go on the internet and see videos or photos on any site it shows them in a bad quality and when i asked around other people they said the video looked just fine and it was only me. I dont know how to fix it. Anyone Help?

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • The quality of 1,4,and 7 keys on N80 and keys illu...

    Recently I have bought a new Nokia N80 phone. It is very good except for the two problems:
    1. I has rather low quality tree keys 1, 4 and 7 (keys in left column of the sliding numerical keypad) i.e. they twist to much and have some strange clicking when pressed and they are not as precise as the other keys on num pad.
    2. The numeric keypad illumination does not turn on always when I open the sliding keypad.
    Does any body have the same problems?
    My software version is 4.0623.0.42 20-09-2006.

    03-Jan-2007
    12:46 PM
    planetf1 wrote:
    The key lighting is sensitive to ambient light levels - so the keypad only illuminates when needed to save battery power
    .. or not. Mine doesn't light up even in complete darkness. I'm guessing it's a hardware issue that means them taking my phone away for a week or three so I haven't taken it in yet ..

  • Wireless keyboard: using scroll and Cmd keys with iPad?

    Excited to set up my Origami case and pair my Apple wireless keyboard with my iPad 1.
    Surprised to find that while I can type, all other keys don't work - specifically Cmd-L/Cmd-R as well as the scrolling keys.
    Is this a known bug or limitation? Is there a workaround? Needing to touch the screen for every movement isn't very usable.
    I've rebooted the iPad. Google turns up many discussions, but no resolution, at least that I've found.
    Thanks.

    Hello:
    I tmight be that the KB failed... 
    However, try resetting the PRAM - it might help and cannot hurt.
    Barry

  • Wireless keyboard lost command and 0 - keys funktion

    Hi all,
    after quite some time of working with no problems at all my wireless keyboard lost the command - keys and the zero. There is no reaktion when I touch them. After a restart they work for some minutes and then they are gone again. What can that be. Working on a MacBookPro with 1.6.8.
    Thanks in advance for any tips and hints. I don´t think it is something with the keyboard hardware-wise because both command keys got lost simultaniously.
    Best regards - Christoph

    Hello:
    I tmight be that the KB failed... 
    However, try resetting the PRAM - it might help and cannot hurt.
    Barry

  • ACNS 5.5 / Troubleshooting bad quality VIDEO (MMS-over-http)

    Hello community,
    For an unexplanable reason I have to deal with an ACNS problem which is not my domain at all ! ACNS 5.5.15 is on a WAE-512-K9 working with CDM.
    Please can someone advice me on how to start the basic troubleshooting steps on the following issue :
    ============================
    - Users in Sydney are complaining of bad quality when they watch a video from an Intranet server in Frankfurt.
    Video flow has bad quality (buffering ..) and/or stops before the end of the video.
    - Users browsers are configured to use the WAE as local proxy on ports 3129 (.pac file). Requested Video on the intranet is in the Windows Media format and flows are MMS-over-http.
    - No multicast distribution is used, neither content pre-positioning.
    ============================
    We did a wireshark trace on the user PC watching a video which ends up unexpectidely with error code 500 => We follow the TCP stream, Time/Sequence graph is linear until ACNS sent [PSH,ACK] tcp flags to the user PC. Then PC answers with [FIN, ACK] etc...and the stream ends.
    I have checked the show-tech (i have attached some commands from the sh tech)  especially TCP statistics but I do not if the values are normal or not.
    I am thinkink to open a TAC case but before contacting Cisco I prefer to try some basic tests if they can help.
    Any recommendation on how to start a troubleshoot or any advice would be gretly appreciated.
    Thanks.
    Karim

    Hi Defcom,
    Thanks for the quick reply. I have tried changing and resetting the bandwidth limits at both ends last week at both ends but no joy!
    I am going to try the solution on the Gerry's link above later but have to wait for my brother to be free as he has an airport as well(had a baby yesterday (hence why we are setting this up)).
    Dave

  • Lookout bad quality data

    I have recived this error in lookout ONLY when I leave the process running for more than FOUR days (sometimes three, sometimes five).
    Lookout bad quality data, unknown reason
    and the data at the control panel looks with a red X.
    The hardware is FieldPoint FP-1001, FP-TC-120 and RS-485 with a National Instruments PCI-485 board.
    I had checked the cable and it is ok. I installed the sistem in laboratory, no in the factory, with another computer, and had the same error.
    Where can the problem be?
    Santiago Orellana V.
    HighLights - National Instruments Ecuador

    In posting questions like this, you'll find that the more details you provide up front, the quicker your problem will be resolved. Which version of Lookout do you have? Have you installed the latest logos version? (Similar problems were addressed by recent releases.) Are you using OPCFieldPoint or a FieldPoint object? Can you communicate with the hardware through FieldPoint Explorer when the red X's appear in Lookout? If you're having problems in FieldPoint Explorer as well, then the issue is most likely with FieldPoint. Otherwise, we should focus on Lookout.
    Regards,
    Michael Shasteen
    Applications Engineering
    National Instru
    ments
    www.ni.com/ask
    1-866-ASK-MY-NI

  • Anyone know how to use a 'home' and 'end' key on the Macbook pro keyboard?

    I had a pc before, and the keyboard had home and end keys on the keyboard for quickly moving cursor to end or beginning of word or sentence.  I can't figure out if there is something like that on the Macbook pro.  It would be really helpful.  So does anyone know if there is those keys and if so what do i use?
    I'd appreciate any help. 
    Thanks

    see if any of this works for you
    On a smaller keyboard, such as the wireless, or on portables, you can use fn- left arrow for home and fn- right arrow for end.
    On a Mac, 'home and 'end' take you to the beginning and the end of document, respectively. Getting to the beginning or end of a line is done with cmd- leftarrow and cmd- rightarrow. Emacs shortcuts, such a ctrl-a and ctrl- e also work in most places, where the app is done right.

  • How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    The BIOS feature that you request already exists.
    1.  reboot the computer
    2.  press F1 to enter BIOS setup
    3.  config -> keyboard/mouse -> Fn and Ctrl Key swap

  • Just switched to MAC from Windows...missing my home and end keys.  Is there a MAC equivalent?

    I am sure there are combination keystrokes to equate to windows, but haven't found them all yet.  What is a good resource for finding this information?

    If you get a wireless PC keyboard with Home and End keys, most programs that use that often will support it.
    For instance Firefox and the free LibreOffice supports those features.
    It's just a lot of Apple programs don't.

  • No Keyboard Short cuts or F keys working in DW 8.0.2

    Very recently, all the keyboard short cuts and F keys have
    ceased to
    function.
    I've tried the delete WinFileCache-*.dat file 'fix', but this
    does not
    solve the problem.
    Any other possible solutions?

    Very recently, all the keyboard short cuts and F keys have
    ceased to
    function.
    I've tried the delete WinFileCache-*.dat file 'fix', but this
    does not
    solve the problem.
    Any other possible solutions?

  • Bad quality after converting to PDF and direct emailing of form letters from MS Word

    Hello,
    when using the the "form letter" option (for creating personalized PDF files from form letters, that are then directly emailed as attachments via outlook) under the "Acrobat" add-in tab in MS Word I keep getting PDF documents with bad quality (e.g. a logo that is inserted in the document becomes very pixelated). When directly converting the same document to a PDF file using the "create PDF" option unter the "Acrobat" add-in tab in MS Word, I get a high quality pdf file with a perfectly smooth logo (very much the same as it looks in the original MS word document).
    Does anyone have an idea what causes the discrepancy in quality of the pdf files that are created via the two options "form letter" and "create PDF" in the "Acrobat" add-in for MS Word?
    Any help is highly appreciated,
    thank you,
    Hans

    Maybe I have not made myself clear in the first post. What I am trying to say is, that I keep getting bad quality PDFs (e.g. pixelated logos) when using the "form letter" option (blue box in the image above) but not when using the "create PDF" option (red box in the image above) from the Acrobat add-in in MS Word. Changing the settings for pdf conversion (green box in the image above) only affects PDFs created from the "create PDF" but not the "form letter" option.
    Does anyone know how to create high quality (e.g. high resolution) PDFs using the "form letter" option (blue box)?
    Best regards,
    Hans

  • MiniDisplay Port (Thunderbolt MacbookPro) to DisplayPort Dell U2410m don't work! The signal only comes as YPbPr, no RGB and bad quality. Is there any solution?

    I want to connect my new MacBook Pro via DisplayPort to a Dell U2410m monitor.
    But the signal only comes as YPbPr, no RGB and bad quality. Is there any solution?
    It works with the mini display port to DVI adapter from Apple but I want to use the DisplayPort.

    J~
    cmelbourne91 was suggesting HDMI because many of the MDP/Thunderbolt to DVI adapters come with an additional DVI to HDMI (not Apple's) and you likely won't find any MDP to HDMI becuase of something weird with one of the Apple or HDMI related patents and the type of cable/jack/plug required for it.
    As for my computer (15" MBP mid 2010), it almost seems as if I have your problem but intermittently. When connected to an external monitor or projector, the thing will project just fine, but then after some time (and no movement of the computer, cables, or screen) the connection quits. Sometimes it comes back on, sometimes it does not, but it basically registers as if there is no external display.
    Any additional info on this?

  • Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do

    Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do??

    I had the same problem on my iPad v2 IOS 7. But it sorted itself after a hard reset (power and home button) followed by a soft rest ( just  power) . I lost all sound at this point. Then restarted again with a hard reset.
    Hope that fixes your iPad v2
    Mo

  • When i transfer an photoshop image in Indesign, this one come out in very bad quality and pixelise even once print

    Hello,
    I have an issu, every image i bring or change trough Photoshop CS6 and transfer to Indesign CS6 or Illustrator CS6 comes out in very bad quality and very pixelated whyle printed.
    The original image in photoshop is 29x32 cm with 300 ppp.
    When i transfer in Indesign, i have to reduce the site via the adjustment button and it comes in terrible quality.
    It never happen before, its just recently, and i didn't change my way to save or the properties of my Photoshop, so if someone can help me to resolve this problem, i will be glad.
    Regards,
    Marie

    Before I should save the image as a PSD (without Clipping Mask and dont flatten the image). the print would come out different colours...not the same.
    Are you saying the printer can't get a .PSD to output, or a PSD's color is unpredictable? Sounds like your printer can print .PSDs, but you  have a color management problem. By different colors do you mean that the printed CMYK color values are different than what was in the placed PSD? If that's the case it may be that the PSD had a profile that conflicted with the InDesign document profile and you are getting unexpected color conversions somewhere in the workflow.

Maybe you are looking for