X230 keeps rebooting after update of Intel(R) HD Graphics Driver Version 8.15.10.2696

Hi,
i just got a new x230. I finished the first time setup and ran the thinkvantage system update utility. It listed the Intel(R) HD Graphics Driver Version 8.15.10.2696 as an optional update, so i ran it.
After it completes and restarts, the system will just cold boot once it gets to the user login screen. Is this a wrong driver for the x230?
thanks.

Hello x230user,
It is the correct driver for the X230 and Windows 7 but it might have downloaded the wrong bit OS for your computer.
Are you able to uninstall the driver?  If possible please boot into safe mode and uninstall the graphics driver.
Please let me know what OS you are using and I will post the correct links.  Is it a 33 bit or 64 bit OS? 
Hope this helps,
Alex
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
What we Do in Life will Echo through Eternity. -Maximus Aurelius

Similar Messages

  • Lumia 1020 keeps rebooting after updating to 8.1 a...

    Hi there, as the title sujests, I just installed the 8.1 and cyan updates and now my phone keep rebooting by itself. 

    @nick881 which operator do you use, in which country? Perhaps that adds information. Anyway, in a few days, Lumia Cyan should be available on the Nokia Software Recovery Tool. I would go for that rather than a hard reset, because it does a complete reset through re-applying the whole firmware+software.

  • My ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

    my ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

    The first thing that I would try is a reset.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    IF that doesn't stop the rebooting, you should restore the iOS Software. Read this carefully and read to all the way through before proceeding.
    Use iTunes to restore your iOS device to factory settings
    At the very end of the article under "additional information" there is a link to recovery mode. You might need to use that if you cannot restore in the conventional manner.

  • HT202157 My Apple TV keeps rebooting after it did the up date

    My Apple TV keeps rebooting after the new roads were down down

    The update didn't apply correctly, you will need to restore
    Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • My iMac keep frizzing after update to os x  10.9.2

    my iMac keep frizzing after update to os x  10.9.2

    Did you solve your freezing problems?
    This is a easy explanation of how to activate writing from right-to-left: http://alefba.us/how-add-arabic-persian-computer
    Bedrood!

  • Iphone keeps rebooting after slide to power down?

    Help! My 4S iphone keeps rebooting after slide to power down?

    iPhone 4s.
    iOS 5.1.1
    When USP charging cable is connected to both the live wall charger and iphone,
    the iPhone will succesfully 'Slide to Power Off'.
    When the USB cable is not connected the following:
    1. Hold down power button until "Slide to power off appears".
    2. Slide the slider.
    3. Iphone gets the spinny wheel.
    4. Screen goes dark for a second.
    5. Apple logo then appears and the iphone eventually turns back on.
    6. No Apps are installed on this 4S.
    7. Restored on iTunes several times, No change.
    8. Changed USB Cable, No change.
    9. Cleaned Connector port w/ brand new, Clean, soft tootbrush, No change.
    10. Blown clean air into the connetor, No change.
    Any New developments / suggestions?????????????

  • Problem arised after updated the intel wireless lan

    Hello, everyong
    My laptop is T510. I just updated the intel wireless lan to the version of 15.02.0000.1258. After the updates, my wireless router was down when the laptop started. Initially it can connect to the router for a few seconds, then the router was down with all the lights going off except the power light. Once I restart the router, everything goes fine, my laptop is able to connect to the router without any problems. So I have to restart the router everytime when I start my laptop. Please help me. How to fix this problem?

    Why do you have to restart the router.
    Have you checked the computer WiFi profile? Why or what is not allowing the connection.
    You could delete the computer profile in Access or whatever you're using and discover, reconnect to it again as if its the first time. It may resolve the issue which is unknown.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • App keeps carshing after updating to iso 6 :(

    I have iphon4.Photo wonder app used to work absolutely fine. App keeps carshing after updating to iso 6
    I have tried deleting and reinstalling the app. Also restored my iphon but still having same problems. Please help!!!
    is there any way or can I roll back to the previous IOS?

    Deleted the account and reinstalled it and solved the problem.

  • Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays imags in pdf docs.

    Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays images in pdf docs.  All the boxes where images are supposed to be are solid grey.  Old documents that worked are no longer displayed correctly and new documents I make do not display images.  All grey boxes.  Worked fine before the update.  Suggestions?

    Hi precious_star,
    Could you please let me know what version of OS are you using.
    Open Acrobat and go to "Edit > Preferences > Page Display" and check whether 'Show large images' option is checked.
    Is this issue specific for one PDF?
    If possible, please share the file with me via email so that I can also check at my end.
    I have sent you a message with my contact id details.
    Hope to get your response.
    Regards,
    Anubha

  • What is the max resolution for external monitors from the intel hd 4000 graphics driver

    What is the max resolution supported by the intel hd 4000 graphics driver found on the 13in MacBook Pro for EXTERNAL monitors?

    OK so after doing much research... this seems to be the best workflow.
    Bring HDV in to FCP as ProRes 422.
    Edit show... add bells and whistles, etc.
    Export movie as ProRes 422.
    Then for the client - ensure that they have latest version of Quicktime and download the Apple ProRes Quicktime Decoder (for mac or Windows). (It is assumed they have a decent computer to play back on.)
    The client will then be able to play a movie encoded as proRes 422 and all will be happy.
    As a back up a high resolution h264 file can't hurt.
    Thanks for everyones input. We got there in the end.

  • Update for AMD High-Definition Graphics Driver

    I have a HP Pavilion g6 Notebook LW350UA#ABA 64 bit operating system Windows 7.  HP Assistant is offering me a update for AMD High-Definition Graphics Driver.  It goes through the check list with green checkmarks next to them all the way down to the download completion.  Then it goes through the installation but stops with a black X beside that.  I close out the HP Assistant and it shows on the Task Bar with a Red Exclamation Point still offering me the same update. I would appreciate any help in how to get this update installed.
    This question was solved.
    View Solution.

    Hi,
    It doesn't look like there are any recent AMD updates for your notebook, so this may be a configuration error with HP Support Assistant.
    Try the following.
    First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    When this has completed, restart the notebook.
    Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
    http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
    After the installation, restart the notebook again.
    Check if HPSA still offers the AMD update.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Ios7 updated, phone keeps rebooting after a logo

    Iphone 4 (AT&T) updated with IOS7 and phone initially had issues activating but once activated, it just keeps rebooting....as soon as the logo pops up, goes down again and comes back with logo and keeps doing since last night. Tried to connect to itunes but as it is not staying up till itunes recognizes it. Tried DFU mode but won't stay that long either.
    it worked perfectly prior to that and updated all IOS updates till now and no issues.
    need help.

    Sorry to hear that you lost all your data
    When you update directly from the phone only the changes from the previous version are downloaded and the download is therefor smaller then the one you get in SUS or PCC which downloads the entire firmware.
    I also get some pop/clipping sound when making a call while listening to music so this is not a problem with your phone. I can forward this as feedback.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Please help:System keeps rebooting after Bios flash update

    Hello,
    Ok for starters I have the K9A2 CF motherboard,4GB of ram,My last Bios was 1.8.
    I was flashing to 1.9 using the bios flash tool and a usb 1GB stick.The Bios flash went without errors and I rebooted.After this I booted back up.It gets to the 512Mb on the screen then poof,the system reboots automatically and keeps doing so thereafter unless I shut the PC off.How can I restore my Bios or fix this issue.This is not good as I  cant even get to the post screen before it reboots to change anything.
    Thanks,
    K9A2 CF board
    Windows Vista 64
    4GB  Corsair ram
    80GB Stata HD
    200GB IDE HD
    DVD-RW Drive

    Quote from: soldat32 on 06-August-09, 05:16:16
    CPU Type   QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
    No errors were found in my memory.My PSU seems to be working fine.My VGA is a XFX Nvidia 9600GT with 512mb.
    Have you tried that?:
    Quote from: Svet on 06-August-09, 03:52:32
    Try with your second stick alone in the same DIMM slot.
    Quote from: soldat32 on 06-August-09, 05:16:16
    CPU Type   QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
    Its 125W CPU.
    Can you shows picture of your board? Is it V2? Is there a heatsink over mosfets?:

  • PowerMac Desktop keeps rebooting after Software Update (Java, security, QT)

    Since my Software Update through Apple yesterday, my Desktop keeps "rebooting" every minute or so. Any ideas?
    www.robertholland.com

    Mine is doing that too. I posted a couple hours ago asking the same thing, and nobody has answered me either. If someone gets back to me before you, I'll let you know, and if you could do the same that would be great!

  • Droid Maxx keeps rebooting after software update

    Since the upgrade on 11/1/14 to 23.3.24, my droid maxx keeps rebooting. It has done this about 15 times since yesterday evening. Any ideas as to what could be causing this? It is also telling me that I need my GPS on and set to high accuracy mode in order to detect my location. Before the upgrade, I only turned my location on when I used the navigation app. Any ideas?

    The Latest update is suppose to get the Phone prepared for Verizon's voLTE  it's hard to say how long it will be till all is functioning correctly with the system and the phones but, if your issues continue & it makes the phone unusable then I'd see if you can get another Droid Maxx hopefully one with out the new update.. 
    My Current: Version is 21.11.21. my Maxx is still running with no issues

Maybe you are looking for

  • Add file to library in version 7.0.2 (Workarounds)

    I rip my cd's as mp3Pro format mp3 to save space without sacificing quality. These are stored on a music drive on my network, with a separate directory per album. With ITunes 6 - I got them into the library by using the Add Files to library command w

  • HT1338 Anybody know how to upgrade online OS X 10.5.8 to 10.6 or higher so I can sync my new IP 5 to Itunes?

    I'm trying to sync and activate a new IP 5 and getting a mandatory Itunes upgrade message.  When I try to upgrade Itunes, I'm told I need to upgrade OS X to 10.6 or higher.  When I go to software updates it says none are available.  I'm currently run

  • Plugin_loader message after upgrading to 1.4.1

    Since upgrading to v 1.4.1 (win) I get the following notebook message in My Documents folder, named plugin_loader: "Failed to load plugin at path C:\Program Files\Adobe\Photoshop Lightroom\sdk_tests.dll because the SDK version it requires isn't suppo

  • AVI quality on DVD

    I have a Canon SD700 IS that I took some video with at 640x480 resolution & 30 FPS. Once I burn these to DVD, will these look descent on the TV?

  • Plug-ins that failed to load:     3-D NO VERSION

    After installing PS CS5X on my new Win 7-64 system, I get this message when I open PS64bit: Plug-ins that failed to load:    3-D NO VERSION -  - from the file "3-D.8bf" I haven't tried anything in the 3-D arena in PS-64bit yet. I can't find any refer