[X230] Missing on-screen display in W7

Hello, I have foolishly uninstalled "On Screen Display" from Programs & Features, thinking it was some kind of junk/malware stuff. This caused me to lose the brightness/volume on-screen display. Duh! I tried to follow earlier instructions on how to bring it back... I installed Lenovo Power Management which brought the "On Screen Display" application back, or at least it is showing under Programs & Features again, but after rebooting, I still don't have on-screen display when pressing volume or brightness keys. What else can I do to bring it back? This is under W7 Home 64-bit. Thanks!

Solution is here.
To summarize what he did:
1. Install all available drivers for your ThinkPad X201 using support.lenovo.com or ThinkVantage System Update
2. Re(install) the fingerprint reader driver
3. After the fingerprint reader driver is installed, reinstall Hotkey Features Integration.
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Similar Messages

Half of screen missing on PDFs displayed from browser

One of my users running IE 8.0.7600.16385 and Adobe Reader X under Windows 7 is getting a half-screen display when he attempts to display a PDF from IE. The scroll bar stops half way down like the screen size is set incorrectly. If he saves the PDF to his PC, and opens it will the full Adobe Reader, it displays properly. Suggestions?

Welcome to Apple Discussions!
Make sure everything is up to date...
iTunes
iPod Updater
Updating iPod's Software
Try these as well...
Resetting iPod
Restore the iPod
If those do not work, try running this battery test...
How To Determine Your iPods Battery Life
(Use that link to set your iPod to make the battery run out. You just want to battery to die. You don't have to worry about seeing how long it lasts).
After the battery is dead, charge it back up and reset the iPod...
Resetting iPod
If none of the above works, then you may need to send your iPod in for service...
iPod Service
btabz

Missing Screen Display Modes in CS4 toolbox

I've always used the screen display modes in the toolbox in prior versions. They are gone from the toolbox, can someone tell me where to access them? I want to have multiple files open where I can see them and work from them.

Thank you John... I needed that! I've been a little lazy in trying to help myself with the new on line help features. Tonight I decided to take the plunge and have discovered several answers. I have been used to wonderful tech school teachers spoon feeding me my Photoshop info. Yes, I'm spoiled, but I know I need to grow up! It's just such a massive program and there is so much to learn, relearn and sift out from what you tend to use and not use. Thanks again... SUS

"Arrangement" tab missing, can't display Macbook on HDTV

Hello,
I have a mini-DVI to HDMI adapter, an HDMI cable and an HDTV. I'm trying to hook up my Macbook to the HDTV, but I'm having trouble because the "Arrangment" tab is missing in the Display settings.
The crazy thing is that I've successfully mirrored displays countless times before, with the same cables, Macbook, and HDTV. But one day the "Arrangement" tab decided not to show up, and I'm at the end of my rope trying to figure out what happened or what I did differently.
The HDTV recognizes that the HDMI cable is plugged in, and the Macbook recognizes when it is connected to the TV as well, flashing blue when I plug or unplug the mini-DVI adapter. I've tried everything I can think of: restarting, unplugging everything and plugging it all back in, sleeping and waking the computer, trying to connect the Macbook while plugged in and while just running on the battery, turning everything off before disconnecting and reconnecting the cables - everything. No matter what I try, clicking "Detect Displays" still does nothing, my HDTV's screen remains blank, and the "Arrangement" tab remains absent.
I've done everything short of buying new cables, which I don't want to do because I know that what I have works!
Any suggestions? I've really missed watching things on my HDTV. Thanks for your time!

After much fiddling with display resolutions and TV setting, and several calls to Apple help, problem was found to have a really basic solution: replace the RCA connector cable. The old one was shot.

My iPhone 4S went into lock-up with a screen display image of USB connector pointing to iTunes logo. I took it to a Verizon store and they said I have a brick lock and that only an Apple retail store 50 miles away could clear it

My iPhone 4S went into lockup with a screen displaying an image of the USB connector pointing to the iTunes logo. I was traveling and took the phone to the closest Verizon store. The store informed me that I had a brick lock and that only an Apple retail store could unlock the phone. The Verizon store explained that they have seen this problem with SEVERAL other 4S users who had upgraded to the new iOS7 operating system and that to their knowledge it is too demanding to work on pre-iPhone 5S phones having a far less capable processor. The closest Apple store was 50 miles away in King of Prussia, Pennsylvania. I went to that store three days later (today) to reset the phone before flying out of Philadelphia Intl. Airport. The Apple store personnel were overloaded and not sensitive to my plight. They told me that I would have to make a reservation for a time 2 hours later for tech support. I couldn't do that without missing my flight - out of luck until I get back to Los Angeles. If the Verizon store explanation is true, Apple needs to accommodate 4S and earlier generation users and not force them to upgrade to a $459 iPhone 5S!

villebard wrote:
The Verizon store explained that they have seen this problem with SEVERAL other 4S users who had upgraded to the new iOS7 operating system and that to their knowledge it is too demanding to work on pre-iPhone 5S phones having a far less capable processor. !
The salesperson at Verizon has no clue what their saying.
My 4S and many of my friends works perfectly fine on IOS 7.3, no issue as all.

My nokia N-70 Music Edition Screen displayed blank...

Hi
nokia N-70 Music Edition Screen displayed blank after few hours.After Removing battery,put again & start it becomes ok for few hours.I have already updated the Software Nokia N-70 but no advantage.
Wht should i do?

strange enough some of the pre-installed apps on the N70 are on the memory card and not the phone memory. which means formatting the memory card will remove everything. it's difficult to get everything back but try these :
1- try to find what you need on the n70 support page
http://europe.nokia.com/A4144775
check phone software.
2- if you have the download app installed on your phone , run it and check for the app there.if not check the nokia download store. http://www.download.nokia.com/
3- if your mamory card is not the original provided with the phone, locate your old memory card. using a computer copy and paste the following folders from the old original one to the new one:
* resource
* sys
* private (copy the subdirectories only and not the whole folder)
4- if something is still missing after all this, i guess it's gone for good
Fear not those who argue but those who dodge

HP On-Screen Display Utility for HP Envy 14 Beats LTD.

I had my hard drive replaced because the stock HDD stopped working abruptly. A fresh install of windows left me with a number of missing drivers an utilities. I found most from software and drivers hp support page for my notebook but there's one problem I could not find the solution for.
I gather that I need the HP On-Screen Support Utility for my notebook because pressing the brightness and audio buttons no longer brings up the on-screen slider. Additionally, the Beats logo doesn't show up with the FN+B function.
Product name: HP Envy14 Notebook PC (Beats Limited Edition)
Product number: XB110AAR
Windows 7 Home Premium 64-bit Service Pack 1
This question was solved.
View Solution.

SOLVED:
A little more research and I found that the On-Screen Display Utility (OSD) is actually part of HP MediaSmart. It can be downloaded from the following HP thread:
HP Mediasmart Software package for Windows 7
Hope this helps other users!

On screen display and FN+ buttons don't work after format

I formatted my entire HDD and re-installed windows 7 pro. After doing the format and re-install the on screen display doesn't show up when I adjust volume or enable/disable caps lock like it did previously before I re-installed. I've installed the hotkey driver, on screen display, display interface driver, ran the Lenovo update utility several times, installed all windows updates. Is there somewhere where I have to enable OSD (on screen display)? I am sure this is just something small that I am overlooking but if anyone has any help please let me know! sorry if this has been posted already, I tried searching before making a post but didn't have any luck.
T400
Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--
Solved!
Go to Solution.

A couple other things to check:
1. look in task manager, is TPONSCR.exe and TPOSDSVC.exe running?
2. look in Services control panel, is "On Screen Display" service installed and started?

X1 carbon - On screen display (brightness) does not work anymore..

I have an X1 Carbon.
Usually when i raise or decrease the screen brightness i had an on screen indicator showing me how much i decreased ot increasing either of the obove.. Now, when i do the same actions nothing apears.. can any one give me a hand?
thanks
Moderator Note: Edited subject to match content.

Hi Joben,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are facing the issue with on screen Display on ThinkPad X1 Carbon.
Please check if the you have enabled on-screen display option in graphic properties. Please click here to know the steps for enabling on-screen display.
If the issue still persists then I suggest you to update Power Manager, Power management and Hot key feature applications.
Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

Brand New Iphone 5s Home Screen display defect

Here goes my ordeal with my Iphone 5s upgrade
After waiting in line for over an hour I purchased the Iphone 5s yesterday at Best Buy (Stonebriar, Frisco, TX). Later that evening, I noticed that when the time was 5:36, the home screen display was not showing the digit 6. Instead it showed a blur. I then changed the time manually to 6:36 and then to 6:43 and each time there was a digit 6 the display showed a blur instead. I must note that the phone was sitting in the grass which was a little moist (which I believe was the causing the issue). I immediately went back to the Best Buy location where I purchased the phone and requested a replacement after showing the defect. The store manager wanted me to wait in the line and I refused to do so (they sold me a defective phone so I did not see a reason why I had to go in that line all over again when it was just a replacement!). Anyways, after a tiff with the manager I left that store with my defective phone.
Next day, I went to the Apple store (Willowbend mall, Plano). I was greeted by genteleman at the entrance of the store who nicely asked if he could help. The moment I told him I suspected my new Iphone 5s was defective he said 'What!!' and made an expression of disbilief. Funny! I was asked to go to another peson who was standing and waving his hand further inside the store. I go to him and explain to him the problem and when I try to demonstrate it does not happen! Oh dear! Luckily I had enough screenshots in store and I showed them all to the store clerk. He then tells me that he can take the phone in for me and get it 'repaired'! In disbilief I ask him if he meant 'Replaced'? He says no, they will try to repair it first - he further speculates saying they will try a restore or maybe a front glass replacement and that if they still can't fix it, Apple will then replace the phone. In exasperation I tried to explain to him that the problem happened yesterday and then today it can't doesn't seem to happen, while adding that it is a brand NEW phone I purchased less than 24 hours ago and that I still am under the 14 day time-frame. I explain to him kindly that I would not be able to verify the fix (Apple does a restore or even changes the glass and returns me the phone and I must believe that the problem was fixed?? - Hel No!) and its not so nice to hear from Apple that they can't take responsibility for a defective product. He kindly says sorry and explains that it is policy and that they have to try to repair first. Oh how I wish I could've gotten Apple to sign my policy document for my money...sigh..don't work like that! So I left Apple and ran across to Best Buy mobile store asking for a replacement. The guy says Best Buy mother store and Best Buy Mobile store keep there own stock during holidays and he can't help. Sweet! I drive down 10 miles and go to a different Best Buy 'Mother' store and of course I'm asked to stand in the line. I swallow my pride and become a part of the line. My turn comes and again I explain the problem and of course the Best Buy clerk says 'Did you try a restore?' What!! Anyways, after a bit of reasoning (cribbing) with a couple of Best Buy agents, I was able to get them to replace my Iphone 5s (and of course they didn't have a gold color so I had to settle for the space gray..not a big deal though as long as this one is not defective also!)
So anybody had this display issue? Issue with Apple customer service?
Rs,
GH

Well they offered to do everything they could to work with you on the device....You are right in saying that the offered what they 'could'. Unfortunately what they could was tied by company policy.
Just like being human there are times things just go wrong- 2 out 2 IPhones 5s in 2 days! I hope people are doing better :-p
You fought against people at the store level who have /zero/ control over policy and had their hands tied by what theri bosses tell them to do. Agreed. I left instead of fighting. Unfortunately they are the first line of support and a manager maybe as far I'd get. Would love to chat with Steve Jobs but I guess now there is only one way for that :-p
They not only rushed you to get service to repair the device but you didn't even do any troubleshooting of your own to try to repair it. Now what if a restore had fixed your issue, you would have kept your device, your color, and what you paid for... - I disagree. If you read my original post, the problem happened the same evening I bought the phone. When I went to Apple I was not able to reproduce the issue. So you tell me how do I verify that restore fixed it? Wait and watch? After 14 days I can't even return the phone. The other speculation made by the rep was changing the glass. I would not try that for obvious reasons.
Why /wouldn't/ you try to repair something before spending your gas/time to replace it the moment something is amiss.
hmmm..
Now the 2nd new phone makes a rattling sound. Something is loose inside..I'd rather spend gas/time and return it than get them 'repair' it or give me a refurbished phone! Why? Because I can at this point and still get a new one with possibly no defects(fingers crossed) or I could find a company that makes better quality products :-p

Can I get my dock to appear on the extended screen display?

I would like to have my dock appear on my extended screen display and my lap top screen. Is this possible?
The thing that is frusterating is when I click on my dock, i have to drag everything that it pulls up onto the extended screen. I would much rather just click on the dock and have it appear on my extended screen without me having to drag it over. If I cant have my dock on both screens, is there a way that I can make my external display be the primary display and my mb pro be the secondary display?

Hi Scott,
If you want the dock on the side, rather than the bottom, you can have it on the right hand side of the right hand monitor, or the left hand side of the left hand monitor. One option, I guess would be to reconfigure things with the 24" as the primary screen, but to the left of the MBP, if you want the dock on the left. Probably not what you want for other reasons, but at least it would get the dock where you want it.
Another option might be to try the third party shareware application "Dock-it" , which allows you to create your own configurable "docks" in various locations. THis actually allows you to choose which monitor you want to locate any particular dock on, and allows placement on the sides of either or both. see http://www.gideonsoftworks.com/dockit.html
I'd been thinking about suggesting this app to Brett, too, but couldn't find the link at the time. I've been playing with it a bit since , and it certainly has some useful possibilities. The docks it creates are a little less intuitive than the Apple one, and a bit fussier to add things to, though.
Cheers
Rod

I wanted to keep my locked screen display with the time and date from turning off is that possible

So I enjoy my locked screen display with my chosen picture because it has the time displayed nice and big and its a cool nightlight but the locked screen display/wallpaper/time with date always goes black after 13ish seconds of locking it is there no way to let the locked screen stay on while charging? because it is awesome if it could stay on as a nightlight also so i dont have to press the lock button to see what time because the normal display is ugly am I just being super picky or am I not the only one who agrees or maybe it does exist im just stupid please respond when you can also thanks for reading much appreciated.

wjosten wrote:
Again, there is NO WAY to do what you asked: display the time constantly.
I have a clock app that displays the time constantly on my iPad. I use it as a bedside clock. Many clock apps have the ability to disable autolock just within that app. Whether there is one that lets you pick your own background, I don't know but I wouldn't be surprised if there were, based on the number of clock apps out there. While what I'm suggestion is not precisely what the OP asked (display the system lock screen), it seems it might be a possible workaround.

How do i get the volume on screen display meter back?

Hello,
I have a minor problem... for some reason the on screen display meter for my volume when pressing on the keyboard suddenly disappeared, I would like to get this back.
I found this thread in the forum http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/how-do-i-get-the-volume-on-screen-display-me... which another was having the same problem I'm having. The only difference is that I'm using HP Pavilion G7 with Windows 7.
Please help, thanks.
This question was solved.
View Solution.

Hi,
You can use the same OSD utility listed in the other thread - it's on the link below.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

[X230] Missing on-screen display in W7

Similar Messages

Maybe you are looking for