X230 or x1carbon ... running 3 or 4 external monitors?

I am looking to power at least two external monitors, would like to have 3 or 4 running off of the x230 (or the new x1 carbon) will this be possible with a ultrabase or similar?

You can run 2 external LCD (mini displayport + vga) with the X230 and another 2 with a Lenovo usb 3.0 dock. So 4 external LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

GT70 2QD system crash with FANS running at 100% on external monitor only

So I have a GT70 2QD with 4710MQ and 970M graphics. I've swapped out the hard drives and gone with 2 SSD's and added another 16GB of RAM. I'm quite experienced with system building, so no concerns there. My problem only occurs when I have the computer attached to an external monitor. The fans will get up to max without using the button to enable the cooling boost and the only way to shut it down is to put the system to sleep. Temperatures are never an issue, especially once the fans get going. The system will occasionally slow down and lag and has from time to time just crashed and rebooted. I have none of these issues while using the laptops own monitor, gaming or not. It is strictly related to being attached to an external monitor. Any thoughts, suggestions or previous experience with this problem would be appreciated.
Thanks

Quote from: medic10167 on 28-May-15, 22:08:21
Thanks for asking...I've done a bunch of research, and from what I can see on the forums this isn't an isolated incident. Sadly it seems that ppl that have sent their laptops in for RMA get them back and still end up having the same problem. It very well could be a motherboard issue, but is that's the case, IMO it sounds like a faulty temperature sensor. The only fix for that would be a new motherboard. The cost of doing RMA business with MSI in the past has been atrocious (over $100 for a video card) so I'm afraid to ask what it would cost to send my laptop to them. All they really need to do is a firmware update that identifies the faulty sensor and changes its operation parameters.
Firmware update has its limits. Maybe this is something cannot be fixed by firmware.

Built-in Isight for External Monitor with Macbook closed

Hello Apple Community,
I'm having trouble using my built-in iSight through my external monitor. My set-up is that the Macbook is closed and I run everything through an external monitor. I'm unable, however, to use that external monitor's iSight with any applications. They either say that there's no camera available or something along those lines. The iSight shows up in the system profile under USB, and I've tried resetting various things, but all of that seems geared more to the macbook than to the monitor. I've also woken up the macbook (where the iSight works fine) and tried mirror/non-mirror modes. When I use a camera-based application via the macbook, it doesn't give me an option of which camera to use, relying only on the macbook's. Is there a way to use the external monitor's camera instead?
Thanks,
Abe

Does one of these help you, Abe?
(1) Your Profile "Products" info shows " MacBook Pro, Mac OS X (10.4.1) ". If this is correct, you may be using an early MBP and/or display. Have you checked for the firmware update? http://support.apple.com/kb/HT3957
(2) Consider Apple's suggestions from the "If the built-in iSight camera, microphone, speakers, or USB ports on the display are not working:" section of http://support.apple.com/kb/TS2400
(3) If you are using a non-Apple external display, contact the seller or manufacturer for help.
Message was edited by: EZ Jim
Mac OSX 10.8.2

U430 Touch with 2 external Monitors

Hi Folks, have recently purchased a u430 touch which I'm very happy with but want to run it with 2 external monitors. Any suggestions?
Both the monitors I have support HDMI and VGA. Will and HDMI splitter do the trick?
Thanks in advance. M

Hi Markhreilly,
Welcome to Lenovo Community!
As per the query we understood that you are looking to connect 2 monitors to your Lenovo U430 laptop.
As per the specification of this model, it has only one HDMI out port as there is no VGA port. If the HDMI splitter has a VGA port then you can connect one to HDMI monitor and other to VGA monitor.
Click here for the specification of the model.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

X230 and running 2 external monitors

Hello,
I was wondering if anyone could let me know if its possible to run 2 external monitors on the Lenovo x230.
[MONITOR 1] [laptop screen] [MONITOR 2]
MONITOR 1= connecting via mini display port to HDMI >> to monitor
MONITOR 1= connecting via VGA >> to monitor
I tried the above but I cant get it working on all 3 only - the 1 external 1 laptop screen works
Does anyone know if the X230 grahics card was designed to handle that?
Thanks
Solved!
Go to Solution.

You need a series 3 dock with 2 DP/DVI to be able to handle 2 external LCD in addition to the internal LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

HT3986 How do I run an external monitor on a macbook pro running windows 7

How do I run an external monitor on a Macbook Pro running Windows 7

on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
windows like osx saw the external monitor and let me clone to it or extend my desktop to it

Mini DisplayPort to VGA isn't working. It won't recognize any external monitor. It worked just fine with my older spring 2011 MacBook Pro running Snow Leopard, but now with my brand new 2012 MacBook Pro running Mountain Lion, it no longer works

I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks

I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here

I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others.

How can I run iTunes on my external HD via a PC?

My 54 GB iTunes library was transferred from a Mac to an external hd. I want to run iTunes via the external on an old Dell PC Inspiron 700m. I don't have enough hard drive space to transfer that 54 GB.
I've tried changing the advanced preferences to point to the iTunes folder on the external, but that didn't work.
I tried the 'choose a library' option with the shift open, and found no .itl file in any of the iTunes folders on the external, though all my music, video, album artwork, etc are there on the external in the correct folders. Is this a translation issue of the Mac files not having file extensions the PC recognizes?
If you are kind enough to answer this request, please keep in mind that I haven't used a PC in almost 9 years, so I find doing anything on it challenging.

Thank you for the reply!
All the files were copied:
Folders (with content):
Album Artwork
Automatically Add to iTunes
iTunes Music
Mobile Applications
Previous iTunes Libraries
Files:
iTunes Library
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTuens Music Library.xml
sentinel

How do I run iTunes off an external hard drive?

I have an 80GB laptop which is getting pretty full, so I've added a 500GB external hard drive with the intention of transferring my music files (amongst other things) to the external drive, freeing up space on the laptop. This has proved (almost) more trouble than it's worth...
Initially I simply copied iTunes over to the external drive using Windows Explorer. Surfing the apple discussions, however, convinced me that I ought to do the "consolidate library" thing as well (which resulted in me duplicating the files on the external drive). Finally sorted that out, deleted the music files on the hard drive, and discovered that my music library was allegedly "empty". Further surfing on apple discussions made me decide to copy the various iTunes library files from the main iTunes folder back to the hard drive. This has resulted in iTunes being unable to open, due to an "unknown error".
I'm ready to give up! Anyone out there successfully running iTunes off their external drive? How do you do it?

Follow up: My next move was to copy my iTunes folder back onto the hard drive. I had only been doing this for ten minutes (the process took twelve hours the previous time I did it) when iTunes was up and running again, and indeed "seeing" all my music files on the external drive. I cancelled the copy process, deleted all the newly copied iTunes music files from the hard drive, leaving all other files intact, and everything seems fine. The problem is now solved, but I'd nevertheless be grateful if someone could explain to me what was going on!
Thanks
Ian

Can I run two big external monitors on my 2012 MacBook Pro?

I understand that my NON-retina 2012 MBP can be set up to drive two Apple Thunderbolt Displays, but am I out of luck on driving two generic 27" DVI or HDMI external monitors?
Boring details: I've just bought a mid-2012 MBP, with a quad-core i7 and 16 Gb of RAM plus the high-end GPU w/ 1GB of video RAM, but non-retina. I'd like to run two external 1080p or DVI HD-equivalent monitors (I have several new Samsung 27-inchers). I can live without the laptop 15-inch screen while I'm doing it!
I know that the retina MBP has two Thunderbolt ports, plus a DVI port, which would have easily given me what I need. However, I didn't get the retina MBP because it's totally non-upgradable by a user. There were a couple of other potential additional issues, including some reported problems installing Windows into Parallels via external DVD player. There's also the $mid-3000's price for retina, tricked out the way I'd like... Tradeoffs! At least I still have Firewire.
The two big externals help a lot with video editing. Even with my old G5 PowerMac, you could immediately drive two 1080p-equivalent displays. I expect that someone will release a much-more powerful solution than the Matrox USB 2 screen driver dongle, etc., sometime soon, using "superfast" USB 3, but I'll lose one of my two USB 3 ports; I'll want to have 'em both free for other externals, I'm sure.
Thoughts and/or solutions?

For those following this thread...
There is a posting elsewhere here in Discussions that describes how to get two large external monitors running on a recent Macbook Pro by using only ONE Apple Thunderbolt Display, then daisychaining a LaCie Thunderbolt drive after the T-Bolt display, and this allows adding another large DVI display in the chain after the LaCie.
Still pricey, since it does involve buying one Apple Thunderbolt Display, plus a LaCie drive, and cables, plus the DVI display, but it's around half a thousand dollars cheaper than two Apple T-Bolt displays, plus you have a very fast LaCie external drive.
Still not what I'm looking for, but if you're interested, here's a link...
https://discussions.apple.com/message/18391941#18391941

How to run windows from an external usb drive

Hi,
I've just install windows using bootcamp. after that i restore that windows installed bootcamp volume to an GUID partitioned external HDD. Now it is shown in startup disc, but when i select that (external HDD) volume it is unable to start.
I don't know what to do? I just want to run windows from an external usb drive like i can run mac osx.
please help. thanks

Windows will not run from an external drive.

Running itunes from an external hard drive

Hi there,
My itunes library is getting a little too large for my iMac to handle (nearing 500gb of my 1TB hard drive, leaving little space for all my other software and documents) and I'd like to move the itunes library and run it from an external hard drive.
I've read the following link and am clear on the procedure...
http://support.apple.com/kb/HT1449
Sure, I can go through the process and see what happens, however, I thought I'd ask to see if anyone else has done something similar and am curious as to whether they encountered any issues / have any words of wisdom to impart?!
I have an Apple TV which syncs with my iTunes, as well as an iPad and an iPhone. The iPad and iPhone sync when connected, but the Apple TV syncs over WiFi...
Will I have any side affects by moving my library to an external hard drive?
I plan to purchase a drive with FireWire 800. That said, I do have a 2TB TimeCapsule, but I cant seem to find any decent information on how to use it as an external hard drive...(even though, I believe, it says you can do so in the 'sales bumf' on the Apple store)
Your thoughts/advice/comments wold be appreciated!
Cheers,
D

MacFormat Issue 236 page 65.
Sorted!

Running audio from an external drive question

HI there,
i am waiting the delivery of a high quality firewiredrive to run my audio tracks for my g5 imac.
I am a beginner at logic and i have logic express7.0 with logic pro 8 on its way.
In fact am a beginner at computer music. For the last 5 years i have been recording on an akai dps16 so this is a big learning curve right now, thought i have already made my 1st c.d. on logic express. Logic is awesome.
so
i am trying to get my head around running audio from an external drive as everyone recommends and instead of waiting for the new firewire drive to arrive i thought i'll learn this using my 500gig maxtor usb2.0 drive.
i have sussed out the record path business and all seems well. I have created 24 tracks of audio and i can see them in the audio folder in my logic project in my maxtor drive. So (i think) i have learned how to run audio from the maxtor, but what seems a bit odd to me is that when i run the exact same song from the internal drive ( I copied it from the maxtor drive) there doesnt seem to be any increase in the load of the system memory or the cpu as seen on activity monitor or logics audio performance meter.
I would have expected the identical song running from the internal drive to be more taxing on the computer.
Maybe i am doing something wrong but i dont think so.
Any help would be greatfully appreciated
Tom

The problem with internal drive is that is accessed by the OS and by Logic.
With a powerful Mac 24 tracks recorded at 16 bits and a sampling rate of 44100Khz are not n issue but increasing these values or the number of tracks the problem will appear and you will see the disk I/O meter going up very fast.
At that point you will begin to experiment audio hiccups before and a song stop later.
The same problem appears with drivers that have a reduced band (like USB 2.0) while firewire ones are faster, more stable and don't load the CPU.
cheers
rob

X230 or x1carbon ... running 3 or 4 external monitors?

Similar Messages

Maybe you are looking for