X230 received, few issues (keyboard, screen). Thoughts?
First, it arrived with a broken key (left Ctrl fell out when I opened the lid). I have a new keyboard on order (they said 2 business days to arrive), so no biggie there. But is the keyboard issue common?
Second, the screen has a bright spot in the lower left part of the screen. Is that normal?
Thanks!
Hey there Coronadoisdead,
Thanks for linking the picture! I can definitely see what your talking about (I didn't see it at first). It is good that the keyboard is at least ordered, and it hopefully shouldn't be to long. With the screen, it ultimately is your decision what route you are willing to take, and how comfortable you are with it's current status. At the very least, continue to monitor it.
Thank you Coronadoisdead for following up with us, and for joining the Lenovo Community!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Similar Messages
-
Screen on 20" Imac...a few issues
Hi,
I see a number of notes about screen issues on 20" new intel iMac...I've had few issues so thought I start a new thread...First, I had the buzzing when brightness was all or most all the way up...Brought it into a authorized Mac repair place and they replaced the video (inverter or card or?)as well as the screen...not sure why they replaced the screen honestly...Now I've noticed a few new issues. I first noticed that my desktop background was visible, a little dimmer but visible, on the top apple bar that should be just white with black menu items...And I have also noticed some rainbow color effects on some black type that really is disturbing as I do a lot of Word processing, depending on the angle this is better or worse or the black type appears a little blurred on some letters...Since then, I've read about 'gradient' problems and many complaints with the 20" monitors...I didn't take any notice of gradient issues, but now have looked a little closer and do notice big color changes if I am looking at screen from slight off center angles--where white goes to blue (up and down) or white goes to brown. (right and left). So after owning many macs over the past 15 years, I've never been disappointed with a screen, but surely am now...I have a mac mini with an inexpensive 19" lcd screen (Princeton brand) that doesn't have any such color changes at all...I was too late to call Apple tonight but will in the morning...Wonder if any folks have any suggestions/ideas...Honest, I'm curious if I can return or get a trade on this if the problem is widespread....Will Apple take a return...and is it better to bring to Apple Store, or to mail to Apple...I had brought it to a local reseller as the nearest Apple store is over an hour away...Thanks for any guidance.Hello rickame, I've got the fix for your issue with the Menu Bar, goto System Preferences then Desktop & Screen Saver, at the bottom you will see a checkbox for Translucent Menu Bar, unclick it and you will have a solid Bar. Sorry but I dont have a fix for the Screen gradient problem, I have the 20" iMac and love the display myself (coming from a 15" dell display, you can see where I'm coming from).
Hope this helps, Steve... -
When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice. I'm sure it's a simple setting issue. Any thoughts ???
have the same issue on my 9630 after upgrading to 624 version. It momentarily shows the previously callers information before showing the new caller's info.
-
After the screen turned white and the folder popped up, it just kept flashing. After a few minutes the screen just turned white completely and I could hear the noise of the drive. It just sat there still with the noise for a good few hours until the battery died and then my mac just shut down completely. I tried to see if the computer could charge, and it does charge. I just can not turn the computer on no matter what. It is dead. It might be the logic board or the drive...I'm hoping it won't cost me a new computer because I just got this 5 months ago....
Do not attempt to charge as that will only make the damage worse. You need to take the MacBook Air to an Apple store genius bar and have the technicians check and see what repair work is necessary. It only takes a very small amount of liquid to cause short circuits and damage.
-
Hello there,
I am having few issues with BI 2004s system. Its a new implementation.
- When you create Data source using DB connect in new system, it creates with old version. I could see the SMALL square box next to the Data source. I would expect the system to generate new 2004s datasource.
- Obviously the generated D/S wont allow us to create New Transformations. We have to create old transfer rules/update rule. I do see the option to migrate the D/S when I right click on it. But I get short dump when I try that and then you have to discard the D/S and create new one.
- Also, it wont allow you to delete the DBConnect D/S although you have option to do that?
Anyone has faced these issues?
Performance issue with reporting:
I understand that you have to have portal in order to execute reports which we dont have at this client. They dont have time and money to invest right now. So we have created reports using BW 3.5 BEx Q.designer/WAD to run the reports on web. The report takes long time when you try to drill down on Material/Customer with only 150,000 records in Cube. The cube has just three dimensions (two char each) and 4 key figures. Any suggestion to improve?
Thanks
SudhakarYes, I noticed it too and was thinking the same thing, blueaura.
I'm sure they want to ensure the scan is reliable. I keep my screen at a lower brightness to save power, and sometimes Starbucks scanners take a bit longer for it to register.
2) is already fixed.
3) is a feature, not a bug. If you are updating an app you already have installed, it doesn't bother to ask you for the password. Nice!
For Google maps, just use maps.google.com in the browser. -
Indesign CS6 - 8.0 on iMac 10.9.1, I have a few issues that may be connected:
1. My computer shuts down goes to a black screen then restarts on its own.
2. My InDesign will crash when I am working and there doesn't seem to be a pattern it just happens sometimes.
3. I have an InDesign file that all of a sudden now takes 30-40mins to PDF 50 pages, I think there may be an issue with fonts but I am not sure, none of the other files take this long.Thank you so much for responding Bob, I tried to update but when I tired I get a message "Contact Administrator if you wish to apply updates on your machine, Updates have been suppressed by the administrator...". I actually have admin rights and I called in my IT guy, he could not get it to update. The Application Manager says I have all current updates. Am I suppoes to update using "AdobePatchInstaller"? Is there a manual way?
-
IPad 2 turns on then after a few seconds the screen goes black
IiPad 2 turns on then after a few seconds the screen goes black.
Hi Tsinker,
I'm sorry to hear you are having issues with your iPad. If your iPad isn't responding or starting up successfully, you may find the troubleshooting steps outlined in the following article helpful:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden -
I got a few issues with the N120 netbook that I hope you could help me to sort out.
1.
First the brightness up/down keys. First I gave this fix a go.
http://www.sammynetbook.com/plugins/for … .php?29576
It works but its very unstable for me, sometimes it will get stuck and just turn the screen all the way down and then hang for some time before being able to turn the light back on. The icon will hang on the desktop too. Beside that it occasionally makes gnome panel freeze or really most of the time.
Then I gave .xbindkeysrc a try from the NC10 wiki.
#Brightness up/down
"xbacklight +10"
m:0x0 + c:111
"xbacklight -10"
m:0x0 + c:116
That seems to work fine however it is not binded to the Fn (just binded to up/down arrow) key I am sure I am missing something pretty simple here, but....
2.
Wifi Fn key binding is not working. xbindkeys -k gives me -
"(Scheme function)"
m:0x0 + c:75
Here I am simple not sure what "Scheme function" to use.
3.
I would like to blacklist the webcam just not sure what module to blacklist. I did check for a BIOS option but unfortunately there is none.
lsmod
Module Size Used by
ipv6 277972 10
hidp 14500 1
hid 42496 1 hidp
fuse 60896 2
i915 183016 1
drm 154656 2 i915
i2c_algo_bit 5864 1 i915
rfcomm 39028 4
bridge 54008 0
stp 2088 1 bridge
llc 5552 2 bridge,stp
bnep 10916 2
sco 10952 2
l2cap 24132 21 hidp,rfcomm,bnep
ext2 69036 1
cpufreq_powersave 1380 0
snd_seq_dummy 2696 0
snd_seq_oss 31168 0
cpufreq_ondemand 7672 2
snd_hda_codec_realtek 206504 1
snd_seq_midi_event 7012 1 snd_seq_oss
acpi_cpufreq 8624 0
snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 6768 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 26664 0
freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 40352 0
uvcvideo 61040 0
iTCO_wdt 10952 0
snd_hwdep 7656 1 snd_hda_codec
snd_mixer_oss 17540 1 snd_pcm_oss
fan 4392 0
joydev 10400 0
i2c_i801 9656 0
iTCO_vendor_support 3080 1 iTCO_wdt
btusb 12632 4
intel_agp 27484 1
snd_pcm 73672 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 21100 2 snd_seq,snd_pcm
videodev 36544 1 uvcvideo
v4l1_compat 15688 2 uvcvideo,videodev
bluetooth 56740 10 hidp,rfcomm,bnep,sco,l2cap,btusb
battery 10984 0
video 19832 1 i915
output 2884 1 video
button 5556 0
thermal 13888 0
pcspkr 2372 0
ac 4360 0
i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
processor 35800 3 acpi_cpufreq
agpgart 32756 3 drm,intel_agp
snd 58436 11 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6848 1 snd
snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
sg 27928 0
psmouse 59644 0
evdev 10176 13
serio_raw 5704 0
ndiswrapper 211324 0
rtc_cmos 11212 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2500 1 rtc_core
ext3 134380 2
jbd 48504 1 ext3
mbcache 7080 2 ext2,ext3
sd_mod 27328 5
ata_generic 4680 0
ata_piix 23080 4
pata_acpi 4228 0
libata 168012 3 ata_generic,ata_piix,pata_acpi
uhci_hcd 23540 0
scsi_mod 110708 3 sg,sd_mod,libata
ide_pci_generic 3816 0
sky2 47240 0
ehci_hcd 35664 0
ide_core 101480 1 ide_pci_generic
usbcore 150192 6 uvcvideo,btusb,ndiswrapper,uhci_hcd,ehci_hcd
Other then these few issues all really seems to work really well. I have only had Arch installed for a week or so (not a lot of time on my hands atm though) but sorting these issues would would make it a 100% for me.
I would appreciate if you could help me out.1. My "gadget" is a basic script:
#!/bin/sh
# display brightness script
# author: lswest
usage="usage: $0 -c {up|down}"
command=
increment=5%
while getopts h o
do case "$o" in
h) echo "$usage"; exit 0;;
?) echo "$usage"; exit 0;;
esac
done
shift $(($OPTIND - 1))
command=$1
if [ "$command" = "" ]; then
echo "usage: $0 {up|down}"
exit 0;
fi
display_brightness=0
if [ "$command" = "up" ]; then
$(xbacklight -inc $increment)
display_brightness=$(xbacklight|cut --delimiter="." -f 1)
fi
if [ "$command" = "down" ]; then
$(xbacklight -dec $increment)
display_brightness=$(xbacklight|cut --delimiter="." -f 1)
fi
icon_name=""
if [ "$icon_name" = "" ]; then
if [ "$display_brightness" = "0" ]; then
icon_name="notification-display-brightness-off"
else
if [ "$display_brightness" -lt "33" ]; then
icon_name="notification-display-brightness-low"
else
if [ "$display_brightness" -lt "67" ]; then
icon_name="notification-display-brightness-medium"
else
if [ "$display_brightness" -lt "100" ]; then
icon_name="notification-display-brightness-high"
else
icon_name="notification-display-brightness-full"
fi
fi
fi
fi
fi
notify-send " " -i $icon_name -h int:value:$display_brightness -h string:synchronous:brightness
It uses notify-osd and displays the bar/icon. If the icon is missing, you will have to copy the notification-* svg files over from the human icon theme. Just in case you'd like it.
Depends what you want to do with the wireless. You can just bring the interface down with
sudo ifconfig wlan0 down
Or else you can remove the module with
sudo modprobe -r <module> -
Stuck on select a keyboard screen
I just reinstalled snow leopard on my macbook because the HD was having issues. I restarted it and it got stuck on the select a keyboard screen. I tried using fsck -f in single user mode and there are no known issues with the HD. I also tried to create a new admin account by using /sbin/mount -uaw and then rm /var/db/ .applesetupdone in single user mode. None of this has worked. Any ideas?
Well, this was a strange one. After paying another visit to the Genius bar, it was discovered my replacement hard drive was in fact the problem - the Mac simply couldn't see it. (The technician confirmed that none of them had ever encountered such an issue.) So with yet another new hard drive, the link above worked. Ie, first format the drive, then the restore will be able to 'see' the destination.
-
I have Iphone 5 and updated to IOS 8... I can not receive a call, the Screen become black and I can not answer the phone call
Hey there jjroca,
It sounds like you are unable to make or recieve phone calls because the screen goes black. I would start by quitting all the running apps on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If that does not resolve the issue, I would use the troubleshooting in the following article, named:
iPhone: Troubleshooting issues making or receiving calls
Thank you for using Apple Support Communities.
Take care,
Sterling -
Stock received and issued report
what is the report name for stock received and issues in a particular site/DC in a particular month.
Hello,
You may use ME2W with selection parameter 'WA351' for open issue qty from DC and 'WE101' for open Goods Receipt by Store. Delivery and Document dates also in the selection screen.
Thanks,
Venu -
Material stock received and issued for a given period of time
HOW to get the material stock received and issued for a given period of time including the open orders.
if there is any BAPI Available then please tell me. or give me the table relations thaks.
thanks inadvancehi friend,
Why don't you try using a TIMER. Try using this code
Timer timer = new Timer((TIMER), new ActionListener()
public void actionPerformed(ActionEvent ae)
// perform your task here...
timer.setInitialDelay(TIMER);
timer.setRepeats(true);
timer.start();
I think this will work fine.
Bye,
Ravi. -
I've a few issues, my old computer was out of memory. I changed to a new one which already had another itunes account (for my business) when i upgraded to os5 my library has dissappeared as it has syncd with the new computer. Is there any way i can restore the information previously from my ipad? really appreciate any advice thanx in advance
Lynda-
If you still have the old computer, you should be able to connect the iPad, run iTunes and restore from a backup from a previous sync. Now that you have it updated, you will not need to do that again.
Fred -
Getting Receiver Agreement issue in IDOC to File scenario
Hi Gurus,
Need your help. I'm working on a IDOC to File scenario. I'm using CREMDM.CREMDM04 as outbound Interface & small structure VEND_FILE_IN_MI as Inbound Interface. Though I've configured the receiver Communication Channel as a File Adapter with proper Inbound Interface I'm seeing the message getting failed which is showing CREMDM.CREMDM04 as both Outbound & Inbound interface and pointing a Receiver Agreement issue . The Receiver service is coming Properly, only the Interface is coming wrong as the sender interface. I've checked both Receiver Agreement & Receiver determination and found the Receiver Service, Communication Channel & Interface are perfectly mapped there, I cross checked the same Configurations in IE via SXI_CACHE after full Cache copy.
Error Message:
No receiver agreement found for sender -SAPERP to receiver -IDOC2FileReceiver,urn:sap-com:document:sap:idoc:messages
Error Category : Outbounding
Error ID : CO_TXT_OUTBINDING_NOT_FOUND
My IR design:
Sender:
Interface : VEND_IDOC_OUT_MI
Message Type : CREMDM.CREMDM04
Receiver:
Interface : VEND_FILE_IN_MI
Message Type : VEND_IN_MT , Data Type VEND_FILE_DT
My ID Config:
1. Sender / Outbound Message: Service Type --> Business System
Service ---> SAPERP
Interface--> VEND_IDOC_OUT_MI
Adapter Type : IDOC
2. Receiver / Inbound Message: Service Type --> Business Service
Service --> IDOC2FileReceiver
Interface ---> VEND_FILE_IN_MI
Adapter Type--> File
3. In Sender Agreement : Specified the Sender Communication Channel
VEND_IDOC_OUT_Channel
4. In Receiver Agreement Configured the receiver service IDOC2FileReceiver aging sender service SAPERP & Interface VEND_IDOC_OUT_MI.
5. In Interface Determination Specified the Inbound Interface VEND_FILE_IN_MI and Interface Mapping VEND_IDOC_FILE_IMAP
6. In Receiver Agreement specified the receiver communication Channel IDOC2FileChannel against Receiver Service & Interface.
I used the Configuration wizard in my second attempt to make sure the sequence of configuration.
Can anyone help me identifying what's going wrong. I'm very new to XI and basically this is the first assignment I'm working on.
Regards,
SubhadipHi Babu,
In the Inbound data type all the fields have MinOccurance = 0 and MaxOccurances unbounded.
Please find the XSD:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://adc.com/poc/sample" targetNamespace="http://adc.com/poc/sample">
<xsd:complexType name="VEND_FILE_DT">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
8f584d80456311dccd680018fe79f69b
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="VENDCODE" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb0390c11dc843000188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Code
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="VENDNAME1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb4390c11dc84e800188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor name4
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ORT01" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb5390c11dcbe3400188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor City
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PFACH" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb6390c11dc896100188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor PO Box
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STRAS" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0335fd11dc9e9600188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor House No & Street
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PSTLZ" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0435fd11dc98b000188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Postal Code
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LAND1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0535fd11dc870500188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Country
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STCD1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7ca8d600403b11dcc9bd00188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Tax Number 1
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TELF1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7040e611dcce4300188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Telephone number
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STCEG" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7140e611dc8f3900188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
VAT Registration Number
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LIFNR" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7240e611dccef700188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Account Number of Vendor or Creditor
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ALTKN" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7340e611dcb3bc00188bd09370
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema> -
I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this
probably your zoom is on. try double tapping with three fingers on your screen, it should go back to normal and then goto
settings>general>accesibility>zoom and disable it
Maybe you are looking for
-
How to delete the films in VLC in my ipad?
I sync some films(.avi) for VLC to my ipad via itune(I bought free VLC in ipad). One problem is too slow to see in ipad, many mosaic occurred. The other problem is how to delete the films in VLC on my ipad.. there is no any button to delete, only add
-
platform: Oracle 10.2.0.1.0 on RHEL5. Issue: tnsping failed from client (successful from the server itself) Brief: I can tnsping and sqlplus to the test1 db from the RHEL5 db server itself, no issue. But when I tried to tnsping from a client, I get t
-
Export to ME to H.264 Audio Out of Sync
HELP!!!!!! Adobe Premiere Pro CS3, 3.2 version Windows XP. For sometime now I have had to go back into Premiere and shift the audio forward so it is many frame ahead of the video when viewing in program monitor so that when the project is exported to
-
Need Epson printer help asap please! *Not printing*
I have a Macbook and I am trying to wirelessly print to my epson rx680 and it doesn't work! bonjour seems to be the problem. any other way to add printers connected to an AE via usb? Thanks for your help!
-
When I create a mail folder, or a subfolder in a mailbox, it takes between 1-4 minutes to complete. Wasn't always like this, but I did notice a slight increase after upgrading to Mountain Lion. But it seems to be getting much worse. Not running any p