X230 win 8 limited connectivi​ty

Hi all,
wanna ask, i just got notebook x230 from my office...
at first there is no problem with this notebook...
but suddenly connectivity starting to get problem...when i connect to my office network
my others colleague that using this notebook dont have the problem like i was
its always say limited...but i can browse internet fine, LAN with other PC is fine also...
the problem is when i access the application on win store app...said it doesnt have connectivity
i already tried using all the solution on the internet, but no good
already tried uninstall driver and install again...
ipconfig /release
ipconfig /renew
ipconfig /flushdns
ipconfig /registerdns
still no luck...please help me guys...
all your help is much appreciated...

Spent 1 hour chatting with HP tech support.  Did a factory reset on the tablet and still the same limited wifi connectivity.  They offered to have my unit swapped under warranty.  But the problem is, they will send you a refurbished one.
I got this through Amazon.com so I will try to return it to them instead, to get a new one.
Wish me luck.

Similar Messages

  • X230 Win 8.1 Pro Fingerprint single swipe power on and login black screen

    When i try to log on using the single swipe power on and login feature sometimes the screen will go to the login screen, the finger print scanner will flash, and then i get a black screen. I can see the mouse cursor, but nothing else. If I swipe my finger again, I will see the login screen again briefly, before it returns to a blank screen again. There is no way to get past this, aside from forcing the machine to power down (Hold down power key for 10 seconds).
    Does anyone have a solution for this. Powering on the device and logging in with a single swipe is a really great feature, but I need it to not brick logging in.
    Thanks for any help or advice.
    -If this post was helpful maybe consider giving me a kudos for it.
    Thinkpad x230 -i5, 16gb RAM, 240gb SSD, 500gb 7.2k hdd, win 8.1 pro
    Thinkpad x220t - multi-touch, i7, 16gb RAM, 80gb SSD, 320gb 7.2k hdd, win 7 pro 64

    I apologize I didn't already provide these answers initially.
    Questions:1.  Does this happen 100% of the time, or is it intermittent?
    I have only noticed this intermittently.
    2.  Does it happen starting from full shutdown (press and hold SHIFT key while you shutdown the computer normally, then swipe to power on and log in).
    I have only had this problem when resuming from a state of hibernation.
    3.  Does it happen starting from sleep (swipe to resume the system from sleep and log in)
    I rarely sleep the system, but I recall it hanging once or twice when coming back from sleep as well.
    4.  Can you check "View all problem reports" screen in Action Center to see if any crash happens at the same time the problem occurs?
    the only problem reports that corresponds with the times this has happened today refer to an problem with the Anti malware Service Executable with the summary being MpTelemetry.
    5.  Can you export registry at these locations:
        a.  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\Credential Provider Filters]
        b.  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\Credential Providers]
    I have this, but unfortunately do not see how I can attach it this post.
    Edit: Here is a link to download it directly. Once you respond I'll disable this.
    Link removed
    It should also be noted that I do not have a problem when single swipe is disabled. (So I need to swipe twice. One to power on, and the other to log in.)
    -If this post was helpful maybe consider giving me a kudos for it.
    Thinkpad x230 -i5, 16gb RAM, 240gb SSD, 500gb 7.2k hdd, win 8.1 pro
    Thinkpad x220t - multi-touch, i7, 16gb RAM, 80gb SSD, 320gb 7.2k hdd, win 7 pro 64

  • X230 Win 8.1 Power Management Device Driver Issue

    Hi,
    Fresh Win 8 build, in place upgrade to 8.1. Then all Lenovo tools updated and latest Lenovo compatability package installed.
    This device is not detected properly. I believe it is a Power Manager driver issue (based on an older post with the same problem, but no resolution posted).
    Lenovo X230
    Type: 2330-A59
    Device instance path: ACPI\LEN0078\5&2890D699&0
    Location: on Microsoft ACPI-Compliant Embedded Controller
    I've tried the typical deletion of the device and re-run the PM driver install package (latest from Lenovo.com). No change. The device is listed back in Device Manager as an "Unknown" device.
    Anyone out there know the solution? I hope it is something I am just over looking.
    JIM
    Solved!
    Go to Solution.

    Found the answer. It is NOT the PM Driver.
    Lenovo HID HW Radio Driver for Windows 8.1 (32-bit , 64-bit), 8 (32-bit , 64-bit) - ThinkPad ... Learn more
    Version
    : 1.0.0.54
    This resolved the issue! It's too bad the  System Update tool did not capture this.
    JIM

  • X230, WIN 8.1 - Bluetooth notification

    Hello, I keep getting a Bluetooth notification "starting bluetoothe device" many many times. Very anoying.
    Osborne 1 - TRS-80 M100 - Ibm PC Convertible - PC110 - TP730 - Mac Portable - TP750 - T42 - TP560Z - X230 - X240.

    try ec reset  https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller

  • Is there a limitation to number of nodes in cl_gui_simple_tree?

    I am getting error in one situation with 2300 nodes. It works fine for smaller nodes. I am gettting the following dump. would appreciate any help?
    ShrtText
        Exception condition "DP_ERROR_SEND_DDBEHAVIOR" raised.
    What happened?
        The current ABAP/4 program encountered an unexpected
        situation.
    What can you do?
        Print out the error message (using the "Print" function)
        and make a note of the actions and input that caused the
        error.
        To resolve the problem, contact your SAP system administrator.
        You can use transaction ST22 (ABAP Dump Analysis) to view and administer
         termination messages, especially those beyond their normal deletion
        date.
        is especially useful if you want to keep a particular message.
    Error analysis
        A RAISE statement in the program "SAPLCNDP" raised the exception
        condition "DP_ERROR_SEND_DDBEHAVIOR".
        Since the exception was not intercepted by a superior program
        in the hierarchy, processing was terminated.
        Short description of exception condition:
        For detailed documentation of the exception condition, use
        Transaction SE37 (Function Library). You can take the called
        function module from the display of active calls.
    How to correct the error
        You may able to find an interim solution to the problem
        in the SAP note system. If you have access to the note system yourself,
        use the following search criteria:
        "RAISE_EXCEPTION" C
        "SAPLCNDP" or "LCNDPU33"
        "_AC_DP_FLUSH_LARGEPARAM"
        or
        "SAPLCNDP" "DP_ERROR_SEND_DDBEHAVIOR"
        or
        "ZSD_ISISR_REVIEW " "DP_ERROR_SEND_DDBEHAVIOR"
        If you cannot solve the problem yourself and you wish to send
        an error message to SAP, include the following documents:
        1. A printout of the problem description (short dump)
           To obtain this, select in the current display "System->List->
           Save->Local File (unconverted)".
        2. A suitable printout of the system log
           To obtain this, call the system log through transaction SM21.
           Limit the time interval to 10 minutes before and 5 minutes
           after the short dump. In the display, then select the function
           "System->List->Save->Local File (unconverted)".
        3. If the programs are your own programs or modified SAP programs,
           supply the source code.
           To do this, select the Editor function "Further Utilities->
           Upload/Download->Download".
        4. Details regarding the conditions under which the error occurred
           or which actions and input led to the error.
    Information on where terminated
        The termination occurred in the ABAP program "SAPLCNDP" in
         "_AC_DP_FLUSH_LARGEPARAM".
        The main program was "ZSD_ISISR_REVIEW ".
        The termination occurred in line 36 of the source code of the (Include)
         program "LCNDPU33"
        of the source code of program "LCNDPU33" (when calling the editor 360).
    Source Code Extract
    Line  SourceCde
        6 *"              DP_ERROR_PUT_TABLE
        7 *"              DP_ERROR_GENERAL
        8 *"              DP_INVALID_TABLE
        9 *"              DP_ERROR_SEND_DDBEHAVIOR
       10 *"----
       11
       12
       13   DATA RFC_QUEUE_FLAG(1) TYPE C.
       14   DATA ERRORLEVEL TYPE I.
       15 * Are there any large automation paramaters to be sent to client ?
       16   PERFORM ACFLUSHLARGEPARAM CHANGING ERRORLEVEL.
       17   IF ERRORLEVEL NE 0.
       18     CASE ERRORLEVEL.
       19       WHEN 1.
       20         RAISE DP_INVALID_PARAMETER.
       21       WHEN 2.
       22         RAISE DP_ERROR_PUT_TABLE.
       23       WHEN 3.
       24         RAISE DP_INVALID_TABLE.
       25       WHEN OTHERS.
       26         RAISE DP_ERROR_GENERAL.
       27     ENDCASE.
       28   ENDIF.
       29
       30
       31 * Are there any drag & drop objects to be sent to cleint ?
       32   PERFORM DDFLUSHBEHAVIORS CHANGING ERRORLEVEL.
       33   IF ERRORLEVEL NE 0.
       34     CASE ERRORLEVEL.
       35       WHEN 1.
    >>>>>         RAISE DP_ERROR_SEND_DDBEHAVIOR.
       37       WHEN OTHERS.
       38         RAISE DP_ERROR_GENERAL.
       39     ENDCASE.
       40   ENDIF.
       41
       42 ENDFUNCTION.

    Is this a Win 7 limitation or a limitation with Acrobat X?
    It is a limitation of Microsoft Windows.

  • RAM + Win OS question

    Hi...
    Is the 3GB RAM ceiling of Win XP limited to Win XP 32bit or does it also apply to Vista and Win 7 32bit?

    It's actually even lower on Vista and W7 due to more rigid kernel protection routines. 2.73 GB per app at most, the default is 2.3 GB. Anyway, why bother? 64bit versions of W7 and Vista are widely available and even most cheap notebooks with not so powerful processors support the necessary extensions (SSE2,SSE3,EMT64, intel VPro). Even if you only do Illustrator and get a minimum RAM outfit of perhaps 6 or 8 GB, ovcerall stability will be far superior over a 32bit system (assuming no otehr issues arise).
    Mylenium

  • It is official: Acrobat is limiting the writing (to disk) of PDF files to 2GB

    Please note that there is no limit to CREATE (in memory) larger files but you can't save them to disk.
    Therefore, it is because of poor software design. No where is it specified but that limit exist.
    I got someone from Adobe to admit that fact and that actually it is specified in internal documentations but they would not release it.
    I also verified that through several experiments.

    Is this a Win 7 limitation or a limitation with Acrobat X?
    It is a limitation of Microsoft Windows.

  • USB Mouse wakes X230 from sleep

    Good morning!
    I've been having the problem of my new X230 waking from sleep for seemingly no reason. Thanks to responses here, I have narrowed it down to the USB mouse, I think. I would appreciate it if someone could give me info on the steps to take to stop this behavior.
    I have set the mouse properties NOT to wake the computer and also changed it in the power management, but the behavior still happens. Do I need a complete restert to have these settings take effect? Is there anything else to try - a driver or using a different USB port? Right now if I put the computer to sleep and turn off the mouse it is fine - if I turn the mouse on and move it before I wake the computer - the mouse movement wakes it.
    This is a brand new X230, Win 7.
    Thanks!
    Lily

    Check under *Keyboard & Mouse* in preferences. Mine is a wireless bluetooth mighty mouse and it's under Bluetooth I don't have a USB mouse but from this article there may not be a switch for turning the wake up off.
    How to use your PowerBook G4, MacBook Pro or MacBook with the display closed

  • Support pdf rendering natively with the OS

    The competitor OSX does it. Since many offices and enterprises move to paperless, pdf based archiving, it is a pity that WinOS does not (yet) support pdf as it does with jpg, gif, png, and other image formats.
    Up to now there is no pdf preview in Winexplorer, and even worse, all the apps that deal with pdfs are in the win world limited, as compare to other os competitors. In Windows no natively pdf printing, no preview on the fly, etc.
    Thanks for listening.

    I would suspect you have not tried reading a .PDF file on your Windows 10 TP system because there is in fact a WindowsApp called Reader as noted by MakeMeLaugh that does indeed read .PDF files.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Missed firefox update in a limited account Win XP

    I was informed about a FIREFOX update (v 3.6.12) I answered yes but forgot that I was into a limited account under Win XP. So the update failed. Normal !
    I switched to an administrative account and updated correctly Firefox.
    But now, each time I open Firefox in the limited account I get a message saying that the update failed...
    How can I get ride of it without re-installing Firefox.
    Thanks
    MC

    Remove the files in the updates and updates\0 folder:
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates<br />
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
    See:
    * [[Software Update Failed]]
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)

  • My satelite Laptop WIFI keeps going to limited C55-B5296 running win 8.1

    my laptop is 5 mo old been having wifi connection trouble from day one wifi goes to limited shows a yellow triangle at botton of screen  I can't do anything online until I disconnect it and reconnect it. it is a satelite C55-B5296 running Win 8.1 also having trouble connecting to websites getting messages web sites can't be found

    Hello Tiny
    Hold the Windows button and press 'x' to open a menu in the lower-left. Select "Device Manager." In the Device Manager, expand "Network adapters." What's listed there?

  • X230 Custom WIN 7 ENT 64 bit

    Hi,
    I would like to know if I am missing something. I setup a x230 with a custom (load from scratch) Win 7 ENT 64bit setup. I have loaded all my required programs etc etc. The setup is running like I need it to - I run sysprep and capture the image on our WDS, though when I take a new laptop and load the image during system setup it does a BSOD loop. I am picking some driver error or something but have even tried loading a "bare bones" setup and still getting BSOD. I have changed the BIOS setup for the drive to "Compatibility" but still fails. Can someone please shed some light as I am processing too many laptops to load each and every one from scratch. And besides what's the point of having a WDS if the image process is not working?
    Thanks
    Solved!
    Go to Solution.

    I have tried both ways, manually installing the driver and then using System update. Nor drive corruption as I have 5 machines that I am testing our imaging process with and they are all doing it.

  • (Win 8.1) x230 Speaker volume strenght / Realtek Audio Driver may be unnecesary

    Hi
    This is more a poll/discussion rather than a question. I wanted to share with you that I have a x230 and as soon as I installed Win8.1 x64 audio worked fine with "Intel High Def Audio" driver. I though sound was kinda weak (I know this is a tiny laptop but it was a lil' TOO weak). Went to Control Panel>Sound>Speakers>Settings>Properties>Enhancements and activated "Loudness equalization" and noticed there WAS like 50% increase for windows sounds, 0-5% for WMP and around 20% for youtube vids. Then decided to install Realtek HD Audio x64 but since it had to reboot and all that and I dont have any "decibelimeter" or whatever, I couldnt take note of scientific results but I THINK the Realtek MIGHT have increased volume another 20% OVERALL but also noticed the driver is 222MB!!! which was hard for me to believe, still dont understand why so heavy, plus, you get a background process from the Realtek thing. What do u guys think about this? How do you use you "ultraportables" in matters of sound/speaker strenght? Would you install the driver?
    PD: Keep in mind "Loudness Equalization" enhancement disappears after installing RT driver.
    Thanks for any comments.

    Several tweaks with audio settings on my x220 with win7 couldn't increase the audio volume and improve the "quality" , if we can say so about that one via the cheapest internal chip. I've deleted Conexant drivers and sw and installed Dolby Home Theater v.4 with x220 preset. The difference is very big.
    The main thread is here:
    http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/m-p/620...
    Also there are many threads aboard regarding DHT and win8 with different links to the sw here.
    I know only DHT supports win8 and Realtek too.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Limited functionality in Win 8.1 Start Screen when using Server 2012 GPO

    I'm testing Windows 8.1 EE with Server 2012 for a school where I need to configure a common layout that users are unable to change. So, I have configured a start layout and exported it via Powershell to the server and it works fine across my various test
    user ids apart from a couple of things.
    If I create tiles on the start screen which point to specific websites such as Scratch, they only work on the user I exported the start layout from - they don't appear on other user start screens under the same GPO. I can get round this by creating a desktop
    shortcut in the GPO under User Config/Prefs/Win settings/shortcuts. It's a bit crude but it works so if there is a straightforward way of creating tiles that do this I'd prefer that..
    The other challenge is getting a documents tile on the start screen. I'm using roaming profiles and folder redirection as pupils could log onto any machine and once again, I can set this up and export the start layout to the server but only the user whose
    start screen I exported gets the documents folder on their start screen when the GPO is applied. The other users just get a blank space. I guess when I create the tile it's pointing to the specific users folder on the server which other users won't have access
    to so it needs to pick up the specific username of whoever is logged on...
    Any suggestions would be appreciated... Thanks

    Hi,
    Please make sure that the .xml file with the Start screen layout must be located on shared network storage that is available to the users’ computers when they sign in (the users must have Read-only access to the file). If the
    file is not available at sign-in, the Start screen is not customized during the session, and the user can make changes to the Start screen.
    After you use Group Policy to import a customized Start screen layout on a computer or in a domain, you can update the layout simply by replacing the .xml file that is specified in the Start Screen Layout policy settings.
    To change the Start screen layout imported by Start Screen Layout policy settings
    Customize the Start screen on your test computer the way that you want it to look for users.
    Run the Export-StartLayout cmdlet, with the following format, to export the new Start screen layout to an .xml file that overwrites the original file:
    export-startlayout –path <path><file name>.xml -as xml
    That’s all you need to do. The next time the users sign in to their computers, the GPO will import the new Start screen layout.
    Kate Li
    TechNet Community Support

  • Lenovo GPS on X230 with Win 8.1?

    Running Gobi 4000 card, where do I find the Windows 8.1 64bit compatible vesion of the Lenovo GPS application?
    Is this build into Win 8.1?
    JIM

    I installed WIN7 drivers to and software for this - works fine (I have Win8.1).
    But Lenovo has not made software version for win8 or 8.1.
    X230T / i5/ 240GB SSD/ 16GB RAM/ WIN8.1 PRO

Maybe you are looking for