X230t no bluetooth after cold start

Hi everyone,
Recently I upgraded to Windows 8.1 and after "cold" start bluetooth doesn't work and is not present in Device manager and in system tray. After restart all is OK.
The problem occurs only after "Shut down"!
Any ideas how to solve this problem?
Thanks in advance

I have one of the Mid 2010 27-inch iMac's running 10.7.3 without any audio problems like you describe. You mentioned that you have two hard drives. Do you have the factory installed hard drive + SSD, or did you install it yourself?
You mentioned TestGen. What version do you have installed? It appears that the latest version of the TestGen browser plug-in is 7.5.1.
Have you tried resetting PRAM?
Have you tried booting in Safe Mode to see whether booting without all of the extra kernel extensions makes the issue go away? If it does then I would look consider reinstalling Lion and evaluating the various utilities your've installed which may be affecting your audio.
http://support.apple.com/kb/HT1455

Similar Messages

TS440 Corrected ECC errors after cold start

Does anybody else get a correctable ECC error on a TS440 when they run memtest 6.1.0 in UEFI mode after a cold start? If I do an ordinary reboot, they don't show up, but if I shut down and then turn it back on, and then run memtest 6.1.0, I see one to four correctable ECC errors. Never anymore after that. It always seems to bother the second DIMM slot, no matter what DIMM I put in it. If I have no DIMM at all in it, then they don't show up. Just wondering if this is just me noticing this or if everybody is affected. (Wouldn't surprise me if most people miss this since older versions of memtest can't detect errors that ECC corrected.) If nobody else can repeat this, should I have Lenovo replace the motherboard?

Thanks. Also, I'm doing this over AMT, and it doesn't happen 100% of the time, more like 75% of the time. Rebooting doesn't trigger it, it has to be just after it comes on from a shutdown state and booting the Memtest 6.1.0 ISO and going right to the scan. If you try to repeat, try with all four dimm slots filled. I'm using this ram by the way: http://www.amazon.com/gp/product/B008LMO1DG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

X230T display dims after BIOS start

MY X230T was originally supplied with Windows 7 Pro. Apparently as a result of twiddling with the power management options on that platform, the display dims significantly between starting the BIOS and logging in to Windows. Specifically: 1. The BIOS screens are displayed at normal brightness 2. The screen then dims to a very low level while Windows loads. The hotkeys are not active at this time. 3. Under Windows 7, the login screen would remain dim until I pressed a key, or clicked on the screen with the mouse. Under Windows 8, the "lock screen" is already displayed at full brightness. This would not be a big deal, except that when booting another OS from a CD (e.g. Clonezilla Live), the display can remain dim, which makes the SW very difficult to use. Needless to say, the hotkeys also do not work under such foreign OSs. I have moved on to Windows 8 as a result of problems with VSS and can no longer find any such power options, either in the BIOS settings, the Windows Power Options or the Power Management settings in the Lenovo Settings metro app. How can I get the display brightness to remain constant during startup?
X320T running Windows 8 Pro x64

Hey, I have same or similar problems with graphic card on same notebook (P200D 12O PSPBQE):
Some times, hard to define, probably when computer is connected to the electricity and used for some hours, a strange effect occurs: the background, strangely without the active window looks like it has reduced number of colors to like 16. Maybe 'without active window' means that only certain ranges of colors are affected and mainly white active window is not because of it's white color, just a theory for now.
The problem is solved either by restarting or by unplugging the power cable. Unplugging the power cable from the computer causes serious not-very-healthy-looking flickering of the screen which after few seconds becomes black and then recovers back to normal. After such recovery, the Vista says something like: the dispaly driver or hardware recovered from serious error. And then the colors are ok again.
I suspect that in my case the problem is caused by electricity disturbance, probably caused by the older refrigerator, because every time I notice this problem, the refrigerator is on. Or precisely true: I have never seen the problem when refrigerator was not working, at least ofr now. I plugged the computer on other end of appartment, electricaly farther away from refrigerator and on another fuse, but the problem still occurs, but less frequently, I think. I will try to take picture of the problem.
Quite strange problem, probably hard to present to the people who sold me the computer. Maybe the pictures of the problem will help.

PSC 1315 faded stripes when printing after a cold start

Hello All,
I have an HP PSC 1315 that is about three years old and was working fine until it recently started printing with faded greyish or white stripes across the page in grayscale printouts. This only happens immediately after a cold start, that is, after not using the printer for about a day.
I've found two temporary ways to deal with the problem. First I can just let it keep printing. By the second or third page, the quality is OK. Second, I can prime the cartridge head by running it across a warm moist paper towel before I print. Neither of these works as a permanent solution, though.
I store the printer in a climate controlled room. The temperature in the room sometimes falls to 62 nowadays but when the problem started occuring the room was the 75-80 range. The humidity in the room is about 50%. I don't think the temperature of the room is causing the cartridge head to dry out, but I could be wrong. Does anyone have any suggestions for how to solve this problem permanently? Thanks.
-Chris

Please see my response in your other thread:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Solution-Center-says-printer-is-dis...
Thanks
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

No sound on cold start after upgrading to Lion

I am running the 27" iMac with dual hard drives and have recently upgraded to Lion. Two things are happening.
1. On cold start / boot up, my system has no sound. And by no sound I mean - no sound. When I go to the Sound option in System Preferences, everything is greyed out and I can not adjust or access any of the controls. The only solution has been to immediately restart my computer. After restart, everything is fine.
2. On cold start / boot up, sometimes I receive a pop up telling me that TestGen is not installed properly and to please re-start. Of course, since I have no sound I'm automatically doing that. Could be that these to things are related somehow? I don't know.
Lastly, and I'm not adding this to the list because there is already a thread about it . . but I will mention it . . I am getting error messages trying to play certain videos "This video requires Quicktime which is not supported by this version of iTunes." Oh yeah? Since when? The workaround is that you apparently have to delete the video from your Library -- DO NOT DELETE FILE FROM HARD DRIVE -- and re-add to your Library. I think this has to be the dumbest bug out there right now.
But what I'd really like is to not have to re-start my computer every d$!@n time just to be able to have sound.
Tired of the Lion errors. Apparently we're all Beta testers <-- lame humor.

I have one of the Mid 2010 27-inch iMac's running 10.7.3 without any audio problems like you describe. You mentioned that you have two hard drives. Do you have the factory installed hard drive + SSD, or did you install it yourself?
You mentioned TestGen. What version do you have installed? It appears that the latest version of the TestGen browser plug-in is 7.5.1.
Have you tried resetting PRAM?
Have you tried booting in Safe Mode to see whether booting without all of the extra kernel extensions makes the issue go away? If it does then I would look consider reinstalling Lion and evaluating the various utilities your've installed which may be affecting your audio.
http://support.apple.com/kb/HT1455

MDM 7.1 not start after cold backup

Hi
after cold backup the MDM 7.1 not make mount the the repository
the sap is up the DB is up only the MDM not mount
it's a cold backup
MDM 7.1
the server is win x64
need your help what i need to check?
regards
Naor Shalom

HI Naor,
Do one thing,assign a password to the user and pass that password or pass "sapmdm" as password for Admin (default password).With SAP MDM 7.1 there is no blank password and such users wont work.
Also for your reference please go through http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80765a21-78f3-2b10-74a2-dc2ab57a1bd2?QuickLink=index&overridelayout=true
Let me know your findings.
Thanks,
Ravi

Database give ORA-600 error after cold backup

HI,
I have oracle 10g install on linux system. i take cold backup of my database using
sql> shutdown immediate
and then copy all files to any other location.
but when i start my database it gives me error like
Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [136], [139], [], [], [], [], []
Fri Dec 4 15:23:18 2009
Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
ORA-00600: internal error code, arguments: [4193], [67], [70], [], [], [], [], []
Fri Dec 4 15:23:19 2009
Doing block recovery for file 2 block 1702
Block recovery from logseq 13, block 3531 to scn 758385
Fri Dec 4 15:23:19 2009
Recovery of Online Redo Log: Thread 1 Group 1 Seq 13 Reading mem 0
Mem# 0 errs 0: /opt/oracle/fina/dbs/redo01.log
Block recovery completed at rba 13.3532.16, scn 0.758386
Doing block recovery for file 2 block 153
Block recovery from logseq 13, block 3531 to scn 758436
Fri Dec 4 15:23:19 2009
Recovery of Online Redo Log: Thread 1 Group 1 Seq 13 Reading mem 0
Mem# 0 errs 0: /opt/oracle/fina/dbs/redo01.log
Block recovery completed at rba 13.3612.16, scn 0.758437
Fri Dec 4 15:23:19 2009
Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [67], [70], [], [], [], [], []
Fri Dec 4 15:23:29 2009
Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
ORA-00600: internal error code, arguments: [4193], [136], [139], [], [], [], [], []
Fri Dec 4 15:23:29 2009
Errors in file /opt/oracle/fina/bdump/fina_pmon_4410.trc:
ORA-00474: SMON process terminated with error
Fri Dec 4 15:23:29 2009
PMON: terminating instance due to error 474
Instance terminated by PMON, pid = 4410i have seen this happen sometime after cold backup database give errors. is taking cold backup of database is not safe.
Please suggest.

Umesh,
Since it is case of Ora 600, for which only last solution is oracle support, but i would like to mention that your are getting ORA-00600: internal error code, arguments: [4193].... So, this 4193 is cause to read following links too:
http://www.orafaq.com/forum/t/47048/2/ and. see Metalink note 153788.1 and 39282.1.
Regards
Girish Sharma

AppleScript to turn off Bluetooth after an hour of no usage

I'm interested in making an AppleScript that will turn off Bluetooth after a bluetooth device is not used for (let's say) one hour. The script should run only on battery life, not when the computer is plugged in.
Any ideas on how to start? Thanks.

I don't think there's any way (at least easy way) to do this.
AppleScript is very good at initiating events, but not good at responding to them. As such it's not easy to write a script in this manner. About the only way to do this would be to have a stay-open script that periodically checks the list of connected devices and keeps track of when the last bluetooth device was used - however, there's a big difference between being 'used' and being 'connected'... you may have a bluetooth headset 'connected', but if you're not running any audio apps it might not be used, and that's hard to AppleScript to determine.

PC Suite stops working with Bluetooth after Laptop...

I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...

Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu

MSI E350IA-E45 USB Not recognised after cold boot.

Any one else have the same issue? My asus (Bluetooth) BT211 is not recognised after cold boot.
I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
MSI tech has not been back to me if this is a fault design, My motherboard issue or bios issue? Which also means to charge via front USB not work when turned off.
And to top it off I cannot find an answer to whether the Wake on Bluetooth USB is supposed to work?

Quote from: mickas on 12-August-11, 20:09:58
I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
How did you connect up the USB ports to 5VSB?
I have a similar issue with a newer MSI board and my USB mouse; I'd have to remove and re-insert the USB connection to the mouse after each cold boot in order for it to be recognized. I did a kludge fix by looping the mouse through a powered USB hub that supplies power to connected devices even when the PC is off.
This MSI board doesn't have a hardware jumper to enable 5VSB to the USB ports, unlike other motherboards. Also, none of the "green" or wakeup settings in the BIOS would cause the USB ports to have power when the PC is off.
So, how do you connect 5VSB to the USB ports? I've heard that crossing the regular 5V rail with 5VSB is a no-no, so I can't imagine how you did it.

970 GAMING black screen when boot on cold start, have to clear CMOS everytime

I have 970 GAMING w/ FX8320, it shows black screen when boot on cold start, have to clear CMOS everytime to enter default.
I have updated it to the up to date M11 bios. Once it boot up, it functions OK no matter whether you reboot or reset it. But after turned off a few hours (cooled down), it shows on black screen again on boot, all LED lights up OK, but I can hear the fan like keep rebooting, any idea?
PSU seasonic 430W, GPU HD7750.

In what DIMM slots did you insert your memory? I just got and at this moment building a new computer with a 970.
A horrible experience I had with my last build reminded me of it. My board was am MSI A88XM-E45. DIMM1 is blue, DIMM2 is black, DIMM3 is blue, & DIMM4 is black. When using two sticks of RAM, it says to install one on DIMM1 & the other in DIMM3 (Makes sense... After all, it's color colored that way).
Well it would not boot. I reseated every component and for HOURS tried almost everything. Finally I decided to place my two sticks of RAM in the first two DIMMS and viola!
I think I will begin this build the same way.

Help -- Recurring Kernel panic at cold start-up

imac g5 -- 1.8 ghz ppc -- 1 gb ddr sdram -- os x 10.4.11
The last two days my iMac has been having kernel panics at login after a cold start up -- off more than an hour or so. I've repaired the disk permissions, and disconnected peripherals, but it still happens, and the cold startup leads me to believe it's hardware... maybe ram or something? What do you think? Should I just keep it on 24/7? Is it possible the ram needs to be replaced and if so, how much would that cost?
here is the panic log:
Sat Aug 2 11:40:04 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000004461F34E PC=0x0000000000937D3C
Latest crash info for cpu 0:
Exception state (sv=0x27AF0280)
PC=0x00937D3C; MSR=0x00009030; DAR=0x4461F34E; DSISR=0x40000000; LR=0x00937D24; R1=0x17AABB20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0093882C 0x00938780 0x00920D84 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x6B657926
backtrace terminated - frame not mapped or invalid: 0xBFFFE900
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Proceeding back via exception chain:
Exception state (sv=0x27AF0280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2FAD3280)
PC=0x9000B348; MSR=0x0000F030; DAR=0x007A8608; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFFE900; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x27AF0280)
PC=0x00937D3C; MSR=0x00009030; DAR=0x4461F34E; DSISR=0x40000000; LR=0x00937D24; R1=0x17AABB20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0093882C 0x00938780 0x00920D84 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x6B657926
backtrace terminated - frame not mapped or invalid: 0xBFFFE900
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Exception state (sv=0x2FAD3280)
PC=0p
Sat Aug 2 11:41:33 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000004460534E PC=0x00000000009381CC
Latest crash info for cpu 0:
Exception state (sv=0x2FFA8A00)
PC=0x009381CC; MSR=0x00009030; DAR=0x4460534E; DSISR=0x40000000; LR=0x00922808; R1=0x17ACBC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009381F8 0x00922808 0x002EC68C 0x0008C920 0x00029234 0x000233F8
0x000ABEAC 0x6FBFFFFF
backtrace terminated - frame not mapped or invalid: 0xBFFFD1F0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Proceeding back via exception chain:
Exception state (sv=0x2FFA8A00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2FFA9000)
PC=0x9000B348; MSR=0x0200F030; DAR=0x0031E8E9; DSISR=0x0A000000; LR=0x9000B29C; R1=0xBFFFD1F0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2FFA8A00)
PC=0x009381CC; MSR=0x00009030; DAR=0x4460534E; DSISR=0x40000000; LR=0x00922808; R1=0x17ACBC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009381F8 0x00922808 0x002EC68C 0x0008C920 0x00029234 0x000233F8
0x000ABEAC 0x6FBFFFFF
backtrace terminated - frame not mapped or invalid: 0xBFFFD1F0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Exception state (sv=0x2FFA9000)
PC=0x9000B348; MSR=0x0200F030; DAR=0x0031E8E9; DSISR=0x0A000000; LR=0x0
Sun Aug 3 01:22:22 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000004438534E PC=0x00000000009381CC
Latest crash info for cpu 0:
Exception state (sv=0x2FE52A00)
PC=0x009381CC; MSR=0x00009030; DAR=0x4438534E; DSISR=0x40000000; LR=0x00922808; R1=0x17AA3C70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009381F8 0x00922808 0x002EC68C 0x0008C920 0x00029234 0x000233F8
0x000ABEAC 0x820D6A13
backtrace terminated - frame not mapped or invalid: 0xBFFEC870
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Proceeding back via exception chain:
Exception state (sv=0x2FE52A00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x00F97C80)
PC=0x9000B348; MSR=0x0000F030; DAR=0x007BD010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFEC870; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2FE52A00)
PC=0x009381CC; MSR=0x00009030; DAR=0x4438534E; DSISR=0x40000000; LR=0x00922808; R1=0x17AA3C70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009381F8 0x00922808 0x002EC68C 0x0008C920 0x00029234 0x000233F8
0x000ABEAC 0x820D6A13
backtrace terminated - frame not mapped or invalid: 0xBFFEC870
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Exception state (sv=0x00F97C80)
PC=0x9000B348; MSR=0x0000F030; DAR=0x007BD010; DSISR=0x40000000; LR=0x0
Sun Aug 3 11:43:39 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000004478534E PC=0x00000000009381CC
Latest crash info for cpu 0:
Exception state (sv=0x2FFEC000)
PC=0x009381CC; MSR=0x00009030; DAR=0x4478534E; DSISR=0x40000000; LR=0x00922808; R1=0x17A53C70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00922808 0x002EC68C 0x0008C920 0x00029234 0x000233F8
0x000ABEAC 0x513D3D26
backtrace terminated - frame not mapped or invalid: 0xBFFFD300
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Proceeding back via exception chain:
Exception state (sv=0x2FFEC000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x303BE280)
PC=0x9000B348; MSR=0x0000F030; DAR=0x007BD010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFFD300; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2FFEC000)
PC=0x009381CC; MSR=0x00009030; DAR=0x4478534E; DSISR=0x40000000; LR=0x00922808; R1=0x17A53C70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00922808 0x002EC68C 0x0008C920 0x00029234 0x000233F8
0x000ABEAC 0x513D3D26
backtrace terminated - frame not mapped or invalid: 0xBFFFD300
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x915000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5c1000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x5e5000
dependency: com.apple.NVDAResman(4.1.8)@0x5fb000
Exception state (sv=0x303BE280)
PC=0x9000B348; MSR=0x0000F030; DAR=0x007BD010; DSISR=0x40000000; LR=0x0
Sun Aug 3 19:43:14 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002FDCF34E PC=0x000000000098EE14
Latest crash info for cpu 0:
Exception state (sv=0x462B2000)
PC=0x0098EE14; MSR=0x0000B030; DAR=0x2FDCF34E; DSISR=0x40000000; LR=0x0099A340; R1=0x179437A0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002DA3EC 0x0099A340 0x00999DC0 0x00995744 0x009959D0 0x00977CDC
0x002E9A80 0x002EB94C 0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x00000000
backtrace terminated - frame not mapped or invalid: 0xBFFFE900
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Proceeding back via exception chain:
Exception state (sv=0x462B2000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x462B3280)
PC=0x9000B348; MSR=0x0000F030; DAR=0x002AF000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFFE900; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x462B2000)
PC=0x0098EE14; MSR=0x0000B030; DAR=0x2FDCF34E; DSISR=0x40000000; LR=0x0099A340; R1=0x179437A0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002DA3EC 0x0099A340 0x00999DC0 0x00995744 0x009959D0 0x00977CDC
0x002E9A80 0x002EB94C 0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x00000000
backtrace terminated - frame not mapped or invalid: 0xBFFFE900
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Sun Aug 3 19:44:59 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000045EF534E PC=0x000000000098EE14
Latest crash info for cpu 0:
Exception state (sv=0x2FABF280)
PC=0x0098EE14; MSR=0x00009030; DAR=0x45EF534E; DSISR=0x40000000; LR=0x0098F82C; R1=0x17A9BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009906C4 0x0098F82C 0x0098AD5C 0x00977C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0xFFFFFFEB
backtrace terminated - frame not mapped or invalid: 0xBFFEDF80
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Proceeding back via exception chain:
Exception state (sv=0x2FABF280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2FAC1C80)
PC=0x9000B348; MSR=0x0200F030; DAR=0x03E3C068; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFEDF80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2FABF280)
PC=0x0098EE14; MSR=0x00009030; DAR=0x45EF534E; DSISR=0x40000000; LR=0x0098F82C; R1=0x17A9BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009906C4 0x0098F82C 0x0098AD5C 0x00977C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0xFFFFFFEB
backtrace terminated - frame not mapped or invalid: 0xBFFEDF80
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Exception state (sv=0x2FAC1C80)
PC=0p
Sun Aug 3 19:46:20 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000045EF534E PC=0x000000000098EE14
Latest crash info for cpu 0:
Exception state (sv=0x2FABF280)
PC=0x0098EE14; MSR=0x00009030; DAR=0x45EF534E; DSISR=0x40000000; LR=0x0098F82C; R1=0x17A9BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009906C4 0x0098F82C 0x0098AD5C 0x00977C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0xFFFFFFEB
backtrace terminated - frame not mapped or invalid: 0xBFFEDF80
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Proceeding back via exception chain:
Exception state (sv=0x2FABF280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2FAC1C80)
PC=0x9000B348; MSR=0x0200F030; DAR=0x03E3C068; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFEDF80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2FABF280)
PC=0x0098EE14; MSR=0x00009030; DAR=0x45EF534E; DSISR=0x40000000; LR=0x0098F82C; R1=0x17A9BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x009906C4 0x0098F82C 0x0098AD5C 0x00977C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0xFFFFFFEB
backtrace terminated - frame not mapped or invalid: 0xBFFEDF80
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Exception state (sv=0x2FAC1C80)
PC=0p
Sun Aug 3 19:48:50 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000004647334E PC=0x000000000098EE14
Latest crash info for cpu 0:
Exception state (sv=0x2FAB7A00)
PC=0x0098EE14; MSR=0x00009030; DAR=0x4647334E; DSISR=0x40000000; LR=0x0098EDC0; R1=0x179EBAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0098EDC0 0x0098F82C 0x0098AD5C 0x00977C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x022B4F80
backtrace terminated - frame not mapped or invalid: 0xBFFEDF80
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Proceeding back via exception chain:
Exception state (sv=0x2FAB7A00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x46878780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x35273000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFEDF80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2FAB7A00)
PC=0x0098EE14; MSR=0x00009030; DAR=0x4647334E; DSISR=0x40000000; LR=0x0098EDC0; R1=0x179EBAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0098EDC0 0x0098F82C 0x0098AD5C 0x00977C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x022B4F80
backtrace terminated - frame not mapped or invalid: 0xBFFEDF80
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x96c000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x618000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x63c000
dependency: com.apple.NVDAResman(4.1.8)@0x652000
Exception state (sv=0x46878780)
PC=0p

KPs are usually caused by a hardware problem - frequently RAM or USB devices. When trying to troubleshoot problems, disconnect all external devices except your monitor, kbd & mouse. Do you experience the same problems?
Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM
Then download & use Memtest & Ramber.
Will it boot in Safe Mode? See
What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
*Resolve startup issues and perform disk maintenance with Disk Utility and fsck*
http://docs.info.apple.com/article.html?artnum=106214
May be a solution on one of these links.
Mac OS X Kernel Panic FAQ
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics
12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Computer won't POST on cold starts

When I turn on the computer after not having used it for over an hour or so, it won't post. Everything turns on, except the monitor. The only way I can turn off my system after it posts, and the monitor is still off, is by turning off the power supply. I found a way of turning it on when doing a cold start, but its really annoying to do. I do this by turning off the PSU, and unplug the monitor from my vid card, and then plug it back in. After doing this, system will turn on no problem. How do I solve this? I know monitor and vid card work good, since they work perfect in my other system.
Oh one more thing, after having a successful start, and having loaded Windows, my CD-RW is looping, the light stays on, until I open/close it, then it stops. Any suggestions?
Oh and I use K8N Neo-FSR.
Edit: PSU is an Antec TruePower 380. 18 amps on the +12v line.

Hi,
I've had lot's of trouble with my system. It didn't POST either. The problem you describe is not the same, but I see you are using the same video card as I do.
My problem was 'resolved' by upgrading the bios version 1.52
I've seen quite a lot of messages indicating that it could be the power supply, being too weak etc... Personally, I do not think it is. In my view it has something to do with timing, and bios 1.52 resolved it for me.
Good luck with it; this issue is a time consumer ...

Q6600 overclock won't start up on cold start, but works fine on restart?

I've successfully overclocked my Q6600 on my msi p6ndiamond board, but I have a weird issue. If I start up my computer from a cold start, it will almost always crash. After restarting however, it will work just fine. I don't know what this is a symptom of. It's like my computer needs to warm up before it can use the overclock. Anyone know what the issue might be?
specs:
OS Windows 7 Home Premium 64-bit
CPU Intel Q6600 2.4ghz oced to 3ghz
Motherboard MSI P6N Diamond SLI
Memory 4 gig Corsair
Graphics Card EVGA 8800 GTS(512)
Sound Card Soundblaster X-Fi Titanium
Monitor(s) Displays HP LP2275w
PSU 750w
Case lian li
Hard Drives 2 80 gig raptor drives 1 320 gig WD
My overclock setup:
FSB 1333
memory 444122t 2.0v
NB default
SB default
FSB VTT 12%
CPU voltage .0375

Quote from: Ghost9 on 11-December-09, 03:00:17
I've also noticed that my computer takes a bit longer to start up than it used to... once things are running in windows everything is normal and often faster than before, but initial start up is a tad sluggish.
Thats mostly a sign that something isnt getting enough juice, same goes for:
Quote from: Ghost9 on 10-December-09, 13:29:28
If I start up my computer from a cold start, it will almost always crash. After restarting however, it will work just fine. I don't know what this is a symptom of. It's like my computer needs to warm up before it can use the overclock.
Try raising NB step by step and see how that goes, did the trick for me on my P6N Platinum.
Dont go to far, otherwise other boot issues can occur, like not being able to boot, only if power is completely drained from motherboard (at least thats the case with my board )
Dont touch SB, no use in upping voltage on that, its only a connection to HD, keyboard etc, low profile stuff, if im correct.

After fresh starting OS 10.6 some programs crashed

When i´m starting my IMAC running on OS 10.6 some programs like firefox or filemaker 9.X will not start or crashes. So i repaired the permissions and after a warm reboot these programs are working, until the next "cold" start.
The permission repair tool wrote 2 warnings:
the SUID -File "System /Library/CoreService/RemoteManagment/...../ARDAgent" was changed and will not repaired.
So to for the following:
The SUID- Datei "System/Library/Private/Framework/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum was changed and will not repaired.
I think the cause of these effects are older software or drivers (like from my HP scanjet 4600), but its difficult to analyse which one is the destroyer of the permission.
No effect was to be seen after stoping some of non apple application startup services in the user account preference place.
Only the warm start after a permission repair helps but its not the way i´d like to work every time.

MacinMuc wrote:
When i´m starting my IMAC running on OS 10.6 some programs like firefox or filemaker 9.X will not start or crashes. So i repaired the permissions and after a warm reboot these programs are working, until the next "cold" start.
For Firefox, try tuning off all add-ons. If things get better, then add them back one at a time to try to identify the culprit(s). You also might try deleting bad and duplicate fonts using Fontbook.
I think the cause of these effects are older software or drivers (like from my HP scanjet 4600), but its difficult to analyse which one is the destroyer of the permission.
Have you checked on the compatibility of your software in general. Go [here|http://snowleopard.wikidot.com> and [here|http://support.apple.com/kb/HT3258].
No effect was to be seen after stoping some of non apple application startup services in the user account preference place.
I would not have expected a fix there.
Only the warm start after a permission repair helps but its not the way i´d like to work every time.
I would imagine the restarts are what helps, not the permissions repairs. As KT indicates the permission warnings you have received are safety ignored.

X230t no bluetooth after cold start

Similar Messages

Maybe you are looking for