X240 Network Driver issue with Windows PE

HelloI am working with OSD deployment in a big organisation. We are using SCCM 2012 SP1 to deploy new computers with our own image and applications. The new Thinkpad X240 is causing a big problem at the moment since we do not seem to be able to find an appropriate Ethernet network driver for the built-in Intel ethernet interface that is working in winPE 4.0. This is what happens.The computer boots, I press the F12 key, the computer presents a list of bootable devices, I choose the ethernet NIC.The computer PXE boots - it recieves an DHCP address from our server, downloads boot.wim, downloads the boot.winPE.boot.wim file and then starts winPE on the X240. It gets to "Preparing Network Connections", hangs there for a while, and then it reboots.If I use the F8 option and run ipconfig, it reports "Windows IP Configuration" and nothing else. If I run /renew it says "The operation failed as no adapter is in the state permissible for this operation". There seems to be no NIC available to winPE to start the Task Sequence with.I have downloaded the Windows 8 x64 Network driver and the Windows 7 x64 enterprise driver package Network driver from Lenovo, for this model and injected the Network drivers in the WinPe boot file. Neither of these drivers is working with the Network Interface in winPE. We do not have any problems with any other models, they all install with our SCCM 2012 SP1. Is there anyone who have experienced and resolved this? Kind regardsNick

Hello, I experiencing the strikly same situation with the same configuration :- SCCM 2012 SP1,- SCCM 2012 SP1 Boot Image x86 4.0,- Lenovo X240,- Drivers Lenovo SCCM package for Windows 7 (32-bit) http://support.lenovo.com/fr/fr/downloads/ds038819- Task Sequence W7x86. No problem when deploying an adaptated Task Sequence with Lenovo X250. However, WinPE don't allowing the network adapter to get a TCP IP configuration when deploying with Lenovo X240. To resolve this situation, do you use :- the standard boot image in the Windows 8 DVD or a customized one with Windows ADK ?- your boot image is this a x86 type or x64 ?- In case of a customized Boot Image, have you, please, some advice to give to use Windows ADK ? Best regards

Similar Messages

Display and driver issues with Windows 7 on i5 MBP

Hello-
I just purchased one of the i5 Macbook Pros, and set out to get Windows 7 working through boot camp. I did this on an older model (32-bit) previously with no problems.
This time around, installation of Windows worked fine, but I have had some trouble getting all the drivers working. The setup.exe program on the OS X DVD didn't want to run at all, I had to do a workaround from the command line that I found on a forum (otherwise I just got a response of "Bootcamp x64 is unsupported on this computer model").
Eventually I got (at least some of) the drivers to work, but there are still some issues.
After installing the drivers, things like brightness and two-finger clicking started working. A number of other things still aren't, though:
- Display: My machine has a 1440x900 screen. But for some reason Windows refuses to go higher than 1280x800.
- Network: No wireless at all. Windows doesn't detect any wireless capability, and only gets on-line via ethernet.
There may be other issues, but these are the big ones. Can anyone provide suggestions on what to do to get everything working?
Thanks!

I just used winclone to move my Win 7 from my Core2Duo MPB to an i5 MBP and had to do a few updates and have eneded up in pretty much the same place as you. I won't bother installing from scratch. I'm guessing we just need to wait for some bootcamp updates for these new machines.
For those of you who are looking to migrate your bootcamp partition over, winclone made it easy - I followed the directions for resizing and Win7 boots, does a disk check, then installed many of the new drivers automatically. There are some drivers that are still needed however, wifi and video. I also so a USB driver issue but have to look at that a little closer before I comment.
Best of luck,
Simon

Driver issue with Windows 8.1 on new iMac 2013

Just got a brand new iMac and am attempting to install Windows 8.1 on it. The Boot Camp Assistant kept timing out on the support software download so I downloaded Boot Camp 5.0.5033 from Apple support and put that on my external FAT drive.
I was able to get Windows installed, but when I attempted to run setup.exe off of my external drive, I got a "Boot Camp x64 is unsupported on this computer model" error. I was able to work around this by running bootcamp.msi from a DOS prompt in administrator mode at which point the install seemed to go through successfully.
Despite that, I'm still getting no love on WiFI, bluetooth, audio, etc. I'm attempting to download again through Boot Camp Assistant on the hope that there's a later version for my machine that's not yet available for direct download but am not optimistic.
Any thoughts/ideas would be great appreciated. Note that I am running the latest everything on the Mac side (recent 10.8.5 Combo).
Thanks in advance.

Actually, that link is exactly what got me in trouble. Use Boot Camp Assistant to get the drivers.
As of this writing, Boot Camp 5.0.5033 will not adequately set up your drivers on a new iMac with Windows 8.1.
The only way I was able to get the WiFi working was to use the drivers automatically downloaded by Boot Camp Assistant. Presmably this is a newer version than 5.0.5033 but I haven't been able to find it anywhere else for download.
I should also note that I was having some DirectX issues running graphics intensive software even after updating through Boot Camp Assistant. These were resolved by downloading the latest driver for my video card (GeForce 780M). There might be other issues that will require a manual driver update but I've yet to run into any more.
Best of luck.

HP PSC 1510 driver issue with Windows 8.1

I can't get my HP PSC 1510 all in one to work with Window's 8.1. I've installed HP doctor and the driver fails. I've downloaded the new driver so I don't know what the issue is? Anybody solve a similar issue?

Hi @DerekRL , and welcome to the HP Forums!
I can see you're experiencing driver issues. I'd like to help!
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

PT UML290 driver issue with Windows 8

Installed the windows 8 consumer preview. The operating system says there is a driver error for the usb modem. "Windows cannot initialize the device driver for this hardware. (Code 37)" Need an updated driver quick! Researched online and I'm not the only one with this problem

DonMannino wrote:
I would like to add my request that Verizon work with Pantech to update the firmware and / or driver to make it work with Windows 8. I use a touchscreen table (Asus EP-121) when traveling, so did a temporary install on a spare hard drive to see how Windows 8 works. It is great for tablets.
I was able to get pretty much everything else to function perfectly, with a few small glitches. Understandable with a Beta operating system. The most serious, though, is that I cannot connect with Verizon because of this driver / device issue.
Windows 8 reportedly will have native 4G LTE drivers when it is released, intended for internal WWAN devices. So hopefully we can get something updated and working soon - it would be a great help when I travel!
Until then - yep, back to Windows 7 I guess.
Verizon has no control on releases by manufacturers. If Pantech makes it work then Verizon can deliver it. Windows 8 is a preview and Pantech is more than likely going to wait until the RC phase before doing any major work as beta releases could have major changes which would make you start over because the old code wouldn't work right.

Driver issues with Windows 7 installation through Bootcamp

Some background: I've got Windows 7 62 bit installed on a 30 gb partition via Bootcamp. My Macbook is from the summer of 2010, and it's currently running Snow Leopard. I don't have a copy of the Mac OS X installation disc (it didn't come with my Macbook), so instead I downloaded the drivers off the Apple website (Boot Camp Support Software 5.0.5033) and put it on a flashdrive.
Issue: Once I've got Windows running, I can't begin the driver installation.
Attempted Fix: Initially I got the message that I needed extended privileges to be able to access the installation setup, so I used the runaround (command prompt) to give it the privileges necessary to run the setup. The drivers appeared to install, but nothing really changed.
I used this runaround: http://joepetruska.com/wordpress/?p=208
However, I didn't have the file bootcamp64.msi, so I used bootcamp.msi. I checked all the driver folders, but I didn't see bootcamp64.msi.
Any and all help would be appreciated!

First of all, windows is either 64 bit or 32 bit, not 62 bit.
Second thing, do you have Macbook Pro? since you have mid 2010 macbook but it is not supported by the Boot Camp Support Software 5.0.5033 for MacBook Pro 13 inch-Mid 2010 is not supported.
Instead of this you need to download and install
Boot Camp Support Software 4.0.4131
for which system requirements are :
MacBook (Late 2006 through Mid 2010)
MacBook Air (Early 2008 through Late 2010)
MacBook Pro (Core 2 Duo, 2.4/2.2GHz, Early 2008 through Late 2011)
Mac Pro (Mid 2006 through Mid 2010)
iMac (Early 2006 through Mid 2011)
which matches your system requirement.

Network Disconnecting issue with Windows 8

We are getting RTO to gateway at regular interval on windows 8 laptop.at same time we are able to ping system from same subnet.
we have installed windows 8 in different make and model of laptop also Ethernet driver is updated with latest version, Windows firewall n defender is not enable no third party firewall or antivirus is installed in laptop.
if we installed windows 7 in same laptop with latest Ethernet driver network is working fine.

can you please launch the following command :
to reset the TCP/IPv4 config
=> netsh interface ipv4 reset all
to configure your NIC:
=> netsh int ipv4 set add name="Name_Of_Your_NIC" source=static address=IP_Address mask=Subnet_Mask Gateway=IP_Of_the_Gateway
where Name_of_your_NIC is the name of your NIC adapter (e.i Local Area Connection)
IP_Address is the ip address you want to specify on the machine
Subnet_Mask is 255.255.0.0 or 255.255.255.0, depending on the IP address's class
IP_Of_The_Gateywa is the IP address of the router
Let me know is the problem is resolved after applying this procedure.
++
HK.
Hicham KADIRI | IT Consultant /Director. MCP - MCSA - MCTS - MCSE - MCITP - MCT

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Itunes issues with Windows having to do with Apple's patent

I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Itunes issues with windows 8... laggy?

anyone one else having abit a of laggy issue with playing music on windows 8?
i just upgraded to windows 8 con. preview, and its great and fast.
i use to have windows 7 and itunes never skipped a beat.
i have a sony viao with an upgraded ram and ssd hdd.
and its pretty fast.
so i dont think its my computer and windows 8 seems to be fine.
anyone else having this issue? but it only happens now and then.......
NOTE:
i have my music all copied to my sdd hdd aswell
and thats all thats really on there as i have ext. hdd's.
i have a average size library in itunes with around about 50gb of music.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

I have called HP-Support and the answer was:
«Thank you for contacting HP Active Chat Support.
This is in continuation to our response with regards to your chat ID: 63381567
As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
Start the computer.
Press the F10 key to enter the BIOS setup.
Select Restore Defaults .
Under Load Defaults , select Yes .
Choose Save Changes and Exit .
Under Save Changes and Exit , choose Yes .
If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
Open Control Panel .
Expand View by: and select Large Icons .
Click Administrative Tools .
Double-click Services .
Double-click Telephony .
Under the General tab, expand Startup Type , then select Automatic .
Click Apply , click Start , then click OK .
Restart the system.
If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
The issue was not resolved.
So I'm waiting for the release of the new driver...

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

Ideapad Flex 14 issue with Windows 10

I had this with Windows 8.1 for almost 2 years. It works fine. Now i upgraded it to windows 10 and everything went ok but both Wired internet connection LAN and Wireless internet connection was not working. I have downloaded the drivers by myself and also what Lenovo support suggested but it is not working. Has anyone with Lenovo Flex 14 upgraded to Windows 10 successfully. In some ways Lenovo was advocating to update to windows 10 but they don't want to help me but send me to premium support where i have to pay :-( Thanks in advance for any help.

This really is a driver issue with Nvidia SLI or not, but it has to do with this monitor and possibly it's 75Hz refresh rate. I thought I'd share and hopefully Acer can work with Nvidia to make their new monitors compatible with Win10. I know we are using bleeding edge tech here, I don't mind doing the troubleshooting as long as someone acknowledges the issue and will fix it. Serious memory leak with 355.60 as soon as the monitor goes to sleep. I've done extensive testing with poolmon, xperf, etc to see if any other drivers cause this, but nothing, this is a brand new win10 fresh install. Easiest way I can show this is via MSI afterburner. Monitor is set to sleep after 1 minute so I can do this quick test. You can see less than 2 minutes in, pagefile usage already jumped up 4gb.Unless I wake the monitor, this will eventually eat up all virtual memory resulting in:

X240 Network Driver issue with Windows PE

Similar Messages

Maybe you are looking for