X250 no smartcard reader despite on list

Hello
It is my first post and sadly about wrong configuration of my x250.
When I was ordering my laptop there was a clear message it has smartcard reader. Sadly It came without it but some unremovable plastic instead.
Has anyone seen something like this? I just can't believe it happen and now support dosen't aswer my emails...
There wasn't even option to chose it during configuration, it was just on the list of standart configuration...
Oddily enough, whan I tried to make another configuration today, smartcard reader is not there at all !!!
What is going on??? I paid over 1400£ to get something I cannot use ...

It depends of your wish and answer from Lenovo official staff if you'll decide to communicate with them or escalate this case.
Because of:
- the difference of cusomizing service options might be a feature for different laptop paltform (i.e.the screen type) or a bug of the site engine;
- I can confirm - when I've choosed the 1st of 3 models with HDD, in the left column, the Smart card reader menu item ... was absent. But after I've choosed "Expand all configuration items" option, it has appeared.
Also you can add the reader yourself or in the Lenovo official cervice provider. Have a look at the Hardware Maintenance Manual and fru_bom file (the link for .pdf file is under "Download now" string):
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x25...
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Similar Messages

Enhancement to bypass "Source not included in list despite source list req"

Dear Experts,
When the indicator source list requirement is maintained in the material master, the system will only allow creation of a purchase order if the source is maintained in the source list (t-code ME01). If its missing we will get an error message when creating or chaging PO with message :"Source not included in list despite source list req".
Is there a enhancement through which we can influence the error message for PO's of type stock transfter order? I tried searching for one but couldn't find a appropriate one.
Had look at ME_PROCESS_PO_CUST & ME_PROCESS_PO also but they were not much useful.
Thank You.
Best Regards,
SP

>
User General wrote:
> Hi thank you very much for your useful reply. My requirement is slightly different though.
>
> I have to avoid the error message not for entire plant but the plant and material number combination.Is there any customizing for achieving this.
>
> In this case if the same plant and material number is used but for different PO type like standard PO(type NB) it should still show an error message as standard.But if the PO type is stock transfer order(Y2UB) then error message to be avoided.
so what you actually want is: source list is obligatory for a combination of plant / purchase order type / material number.
there's no customizing this.
actually, i have difficulties in accepting your search for an exit/enhancement because the configuration of your system does not match your business process = why do you want to avoid an error message in case of a STO scenario where the source list entry is missing?? either you have defined source lists obligatory on plant level - then see to it, that the source lists are maintained in the plant (you can mass generate it using ME05) or it is not ... in which case you will have to train your users accordingly ...
please do not take offense - none is intended - but i wonder why one would make a thing mandatory, only to circumvent the obligation by (intransparent) programming.

SmartCard reader not working on EliteBook 6930p

Driver sp41982 installed. XP Pro SP3 OS. Any SD card inserted is not detected. Laptop is leased so could this be a
service call?

Am having similar problem with DV7-1232nr, smartcard reader won't access a 2GB micro-SD card with adapter--it sees & reads it, but won't open or copy files despite admin permissions/ownership/login/etc. The driver DL doesn't help since it's same version installed on LT--had hoped there was a NEWER driver to fix this!
Hoping your solution will be similar to mine. Good luck finding answers, either way!
Gina

Grant read permission on List for Anonymous user for public facing site in Sharepoint 2013 Online

I have a public facing SP site ( SP online 2013 with Office 365 ). There are certain app parts added to it which read data from a
custom list created on that site. By default anonymous users do not have read permissions list. I want users to see the list data without login in . I tried modifying the settings for anonymous users , however I am unable to do it as the "anonymous user"
permissions cannot be checked by me.
How do I provide read permissions to anonymous users?
Thanks in advance

once you make the web site online anonymous users get the read access to list.
You can add the list view webpart and show the details to anonymous users. In the below link i have added the announcement list view webpart to a page.
https://velegandla-public.sharepoint.com/Pages/Page.aspx
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Apache 2.0.59 - cannot read certificate revocation list

Hello,
i've installed a thawte SSL certificate on a Netware 6.5 SP7 server with apache 2.0.59. If i want to validate the certificate with C1, i get the following error "cannot read certificate revocation list" ! I've found in a forum task, that this is not a great problem, but when i remark the command "SecureListen 443 "new-NDS-name" in http.conf from apache, then the webserver cannot start. Error in apache log is "[Wed Jan 05 15:57:42 2011] [crit] (10043)Unknown error: make_secure_socket: failed to get a socket for port 443 Configuration Failed". I've found in novell support forum the following task - Error: Invalid cannot read certificate revocation list. I contact thawte and they told me the following - All of our Thawte certificates are issued a CRL to check. We do not have any process or way to issue a certificate without the use of the CRL. Unfortunately no, as almost all CA's will use a CRL to ensure that the certificate's validity and status is always up to date.
What can i do ? Does anyone has an idea ? It was great to get it running......
Regards,
Norbert

NSuttner,
> with apache 2.0.59. If i want to validate the certificate with C1, i get
> the following error "cannot read certificate revocation list" ! I've
>
FWIW, I have always regarded that as cosmetic (TID 10094995). Ie I sometimes get errors in C1, even if the certs are fine.
Your message indicates that you did not get the complete certificate list. Ie you need to have your cert, the trusted root and all intermediaries. Sometimes you have to import them all into Ie, then export the complete list
http://www.novell.com/support/php/se...00%20195481184
THE TID to read is:
http://www.novell.com/support/php/se...00%20195481155
and:
http://www.novell.com/support/php/se...00%20195481134
Also see:
http://www.novell.com/support/php/se...00%20195481082
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Send Crystal Report by email reading Domino email list

Hello all,
Do you know how do I configure Crystal Reports, so that when I address a report to be sent by email, it reads the contacts list in a Domino server (lotus notes)?
Thanks in advance,
Cristina.

As of CR 9 all functionality has changed, database, exporting, API's etc.
Also, by default the export dll's are not installed. Go into add/remove programs and change CR. Select the modify, or what ever it is called on your OS, and expand the export types and scroll down until you see Lotus Domino...
Test again
Thank you
Don

SmartCard reader not working (EliteBook 8740w)

Hi!
I had a fully clean Win8.1 install on the 8740w - Can't get the SmartCard reader to read any cards. Its been a complete dud since I installed the new Windows. I have the new drivers, I've installed them, uninstalled them and installed them again. Is this a problem with Win8.1 or is there a solution for this? Is it broken?

Hey LVD,
Welcome to the HP Support Forum!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
I worked on behalf of HP

SmartCard Reader issues

Hi,
I use SmartCards for business and online transactions, and I bought a USB SmartCard Reader for my Mac Book Pro. The reader is the SCR3310, and I've noticed with the one I bought and some of my co-workers' readers, my Lap top will not recognize the reader when I plug it in nor push any power to it. My USB ports work well enough in the sense that I can plug in my USB mouse, keyboards, and external hard drives without any problems. The weirder thing is one of my co-workers has an older MacBook Pro, and his does work with my Smart Card Reader, is there some weird security setting that is not allowing my USB drives to recognize this reader? If so how can I adjust it?
Thank you for any information!
Tomes

I don't have any specific guidlines. If a source or source RPMS (SRPMS) available for the SCR335 on any other linux distribution, it may be possible to rebuild them for JDS.

Smartcard reader not working under Mountain Lion

I have an SCM SCR3500 smartcard reader. It was working under Lion, using the Mac OS Forge smartcard driver. After upgrading my MacBook Air to Mountain Lion, the reader is no longer recognized. To make matters worse (!!!), Mountain Lion only allows installations via the App Store. Is there a driver for 10.8 that can be used with this reader? Where? How?

Another piece of information; I checked my system logs and found this entry repeating once I tried to connect my external display:
16.09.12 18:26:45,972 System Preferences[14205]: CGSGetNumberOfDisplayModes: Invalid display 0x41dc9d00
16.09.12 18:26:45,973 System Preferences[14205]: CGSGetCurrentDisplayMode: Invalid display 0x41dc9d00
16.09.12 18:26:45,973 System Preferences[14205]: CGSGetNumberOfDisplayModes: Invalid display 0x41dc9d00
16.09.12 18:26:45,973 System Preferences[14205]: CGSGetCurrentDisplayMode: Invalid display 0x41dc9d00
16.09.12 18:26:45,979 System Preferences[14205]: CGSGetNumberOfDisplayModes: Invalid display 0x41dc9d00
16.09.12 18:26:45,980 System Preferences[14205]: CGSGetCurrentDisplayMode: Invalid display 0x41dc9d00
16.09.12 18:26:46,003 System Preferences[14205]: CGSServiceForDisplayNumber: Invalid display 0x41dc9d00
16.09.12 18:26:46,003 System Preferences[14205]: CGSServiceForDisplayNumber: Invalid display 0x41dc9d00
16.09.12 18:26:46,009 System Preferences[14205]: CGSServiceForDisplayNumber: Invalid display 0x41dc9d00
I really do hope that 10.8.2 is going to adress this issue. Up to that point Mountain Lion has rendered my external display completely useless...

Unable to recognize integrated smartcard reader by Client Security Solution

Hi, I have a W510 with an integrated smartcard reader. I tried to setup a new smart card, but at Client security solution ver. 8.30 over a windows 7 64 bits, is not recognized. Accessing the CSS software, I choose the Advance menu, an the option "Setup smartcard" always remains not highlighted, that means that the CSS software doesn't recognize the Smartcard/smartcard reader. The smart card reader driver is recognized by the system devices and it's installed well, the system said that is working correctly but I'm not able to access the "setup smartcard" option at CSS SW. I updated everything from Lenovo site and still doesn't work. Someone has any clue or idea about this? I'm trying to setup a Encryption Smart Card, I don't have idea about what kind, but it's new from an Omnibook (a pack with 5 smartcards) and it comes label with "an imagineCard Solution" label. it has a round chip instead a square chip like the credit cards.
I really appreciate all your advices about this.
Ebert Toxqui
For roadwarriors, no options... Only the best!
*W520 Corei7, Win Pro 64 , 16 GB RAM, SSD 128 Gb, 500 Gb 2nd HDD, FHD, 2GB VRAM Nvidia
*T61p 6459CTO T9300 2.5 GHz /Vista Ultimate 32bits, 4 GB KINGSTON RAM, 15.4" WUXGA w/Intel Turbo memory, NVIDIA Quadro FX 256 RAM
160 gb HD, 9 cell battery
*LENOVO T61 7662CTO T7300 2.0 GHz /Vista Ultimate 32bits, 3 GB KINGSTON RAM, 14.1" WXGA w/Intel Turbo memory, NVIDIA Quadro NVS 128 RAM,
160 gb HD, 7 cell battery
*Thinkpad T42 Pentium M 735 1.7 Ghz, 1GB RAM /Win XP SP2,ATI RADEON 7500 32 Mb, 15", WiFi,Bluetooth, 40 Gb HD

Yes, CSS software has the option to setup a smart card (as is mentioned at CSS deployment guide from Lenovo for CSS 8.3), but the software doesn't recognized the smartcard once I plug into the Thinkpad. The main purpose for the smart card will be authenticate the user using smartcard allowing to work when it's inserted and stop to work once it's retired from the laptop. The chip and all security options are enable using CSS.
Please let me know how to solve this or give me the software/middleware to recognize the smart card for W510.
Thnaks in advance.
Ebert Toxqui
For roadwarriors, no options... Only the best!
*W520 Corei7, Win Pro 64 , 16 GB RAM, SSD 128 Gb, 500 Gb 2nd HDD, FHD, 2GB VRAM Nvidia
*T61p 6459CTO T9300 2.5 GHz /Vista Ultimate 32bits, 4 GB KINGSTON RAM, 15.4" WUXGA w/Intel Turbo memory, NVIDIA Quadro FX 256 RAM
160 gb HD, 9 cell battery
*LENOVO T61 7662CTO T7300 2.0 GHz /Vista Ultimate 32bits, 3 GB KINGSTON RAM, 14.1" WXGA w/Intel Turbo memory, NVIDIA Quadro NVS 128 RAM,
160 gb HD, 7 cell battery
*Thinkpad T42 Pentium M 735 1.7 Ghz, 1GB RAM /Win XP SP2,ATI RADEON 7500 32 Mb, 15", WiFi,Bluetooth, 40 Gb HD

Source of supply () not in source list (27423/0010) despite source list req

Hello,
We have soon upgrading APO in 7.0 version.
We have a SAP R/3 in 4.7 version.
APO created Purchase Requirements in SAP R3 with two kind of processes :
- Heuristics
- Deployment
In SAP R3 we have several database to maintain in order to affect correctly these Purchase Requirements to the good plant and the good scheduling agreement :
- info record
- scheduling agreement
- source list in wich we attached the number of the scheduling agreement
When we manage the heuristic, there is no problem .The Purchase Requirements are send via the C5 transaction.
When we manage the deplyment, we have the message "Source of supply () not in source list (27423/0010) despite source list req" - The purchase requirements of the deployment are sent directly to SAP R3.
I tried to compare the database of a OK item and a NOK item but I can'tfound something different.
Have you ever had this kind of problem ?
Thanks in advance for your help.

Hi Jingco,
I guess you have the PIR( Pur.Info record maintained ) in R/3 and CIFed to generate the Ext. Procurement relationship.
Please check that the Source of Suppy in Source list (ME01) is same as maintained in PIR.
revert back if still it doesn't help.
Regards
Kumar

Source of supply not in source list despite source list req.

I'm getting a log message "Source of supply (5300001019) not in source list (WCA0027/1001) despite source list req." when we run the SNP production planning (cdpsb0).
we are using APO and created an external procurement relationship based on the source list in ECC. i tested with 2 setups: with check and without check on the material master - purchasing (source list). I'm getting the same error.
whatelse should i check?

Hi Jingco,
I guess you have the PIR( Pur.Info record maintained ) in R/3 and CIFed to generate the Ext. Procurement relationship.
Please check that the Source of Suppy in Source list (ME01) is same as maintained in PIR.
revert back if still it doesn't help.
Regards
Kumar

BB 10 - Smartcard Reader Support App & Proximity Lock etc.

Hi,
S/MIME isnt supported without an BES10, ok. :-(
But, can i use the Smart Card Reader 2.0 without BES10 at least for Proximity Lock on my new Q10 like at my 9900?
Will be Smartcards (like the Safenet 330) supported on BB10 without BES10? (For Device Lock or to get VPN Certificates from the Smartcard)
Is the Smart Card Support App released? I cant find it in the App World :-(

I refer to the official Blackberry Q10 10.1 manual. Under Passwords & Security you find a "About Smart Cards" Section.
here is the Link: http://docs.blackberry.com/en/smartphone_users/deliverables/50635/als1334337087097.jsp
"...About smart cards
After you download the BlackBerry Smart Card Support app from BlackBerry World, you can use a smart card and your device password to unlock your BlackBerry device. You can also use smart card certificates to send S/MIME-protected messages................."
There is no way to pair the Smartcard Reader with the Device without this App. The normal Bluetooth Pairing function doesnt work because the Reader is a special Device (which works with 256 bit AES-Encryption etc.)
On a 9900/9930 you must enter the Reader Section in the Settings and then select a "Connection-Assistant" which turns Bluetooth on and asks for pressing Buttons on the Reader/entering Pins displayed on the Reader..

Read the requirments list for a sequence in a sequence file

Hi,
How can i read the requirments list for a sequence in a sequence file.
i used the below code for that but am getting "requirments" string.
SequenceContext seqctx = e.uiMsg.Thread.GetSequenceContext(0, outframeid);
if(seqctx.PreviousStepIndex >= 0)
Step prvstp = seqctx.PreviousStep;
String SeqTestID = prvstp.Sequence.Requirements.Name;
Thanks in advance
IVI

From the TS Help:
"""Requirements Property (Read Only)
Syntax
Step.Requirements
Data Type
PropertyObject
Purpose
Returns the Requirements property for the step. The Links subproperty of the Requirements property is an array of string values that represents the product and unit requirements the step covers.
Remarks
You can use the following pseudo code to add a new element to the list of requirements:
PropertyObject links = step.Requirements.GetPropertyObject("Links", 0);
int nextAvailableIndex = links.GetNumElements();
links.SetValStringByOffset(nextAvailableIndex, PropertyOptions.PropOption_InsertElement, "REQ_ABC");"""
Instead of SetValStringByOffset use Step.Requirements.GetPropertyObject("Links",0x0).GetValStringByOffset(0,0x0). Also, you don't have to get the nextAvailableIndex if you know which index you want. If you want all indices then you will have to iterate.
Hope this helps
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to read the gain list of a DAQ card from labview?

Hi,
Its known that you can set the gain of an ADC of a DAQ card by setting the high and low values.
Different cards have got different signal ranges corresponding to different gains.
My question is ... Is it possible to read the gain list of a DAQ card from labview?
It is definitely possible to read the signal ranges available for the device. It would be very helpful if some one can tell me the method to read the gains corresponding to the signal ranges.
(Even the device specification provides only the signal range but not the gain corrsponding to it )
Thanks
Message Edited by Vsh on 04-08-2008 03:50 AM

Hi Vsh,
It appears that you have found the gains applied for the various ranges (I assume from the user manuals). So if I understand your question correctly, you are looking to poll the card for the current gain (or the various gains available)
Because DAQmx selects this for you (unlike Traditional DAQ), there is not a way to poll directly. If you want, you could poll the min/max values and then use this to figure out the range setting (and thus the gain).
Please refer to this post, it gives more information about the gains/ranges in general.
I would suggest putting in a product suggestion if you would like this feature. Those go into the decision making process for our R&D team, meaning they actually do look at them. If you wish, I can submit a suggestion internally was well for you, that way your suggestion gets 2x the exposure. Let me know if you want me to do this.
Neal M.Applications Engineering National Instruments www.ni.com/support

X250 no smartcard reader despite on list

Similar Messages

Maybe you are looking for