X3-02 problem with new firmware, "waiting" on home...

Hello,
Today I've got new firmware 6.02 via Nokia Ovi Suite. After that on Home Screen on one of the bar word "Waiting" appeared.
I can't delete this, can't set something else instead. In Home Screen settings that bar is inactive.
I've tried reinstall firmware, remove battery for some time but nothing helped.
Please help.
I'm from Poland.

Pls check the memory in use for ur contacts. If u've assigned favourite contacts from phone memory, & they are duplicated d/t any cause,eg being saved 2 times or both sim & phone memory in use then it leads to the msg waiting. To avoid this, set the memory to phone & delete duplicated contacts from the phone memory.
I'm not sure what do u mean by bar inactive as after reinstalling firmware all bars are activated. One for fav contacts, one for communities, one for shortcuts
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

  • N95 photo shooting problem with new firmware V11

    I have got a problem with photo shooting after upgrading my N95 (Product Code: 0534832) to the new firmware (v11.0.026) via Nokia Software Updater.
    Before upgrading the firmware, I can turn off the loud and ugly snapping sound when shooting a photo; all I need to do is to change to Silent Profile (that has Warning tones OFF). But it seems that I can no longer turn that ugly sound off with the new firmware!
    Is that a bug? Is there another way I can turn the sound off?

    Actually I have 2 N95 phones, one is my GFs, both of them are bought and used in Hong Kong.
    The way I test the differences between versions is directly comparing each feature with the two phones, where the one with new firmware has product code #0534832, and the one with old firmware has product code #0548445. Both of them has www.nokia.com.hk printed on the box and manuals, so I assume local law is not an issue.
    By the way, I have just discovered that the one with product code #0548445 cannot update via Nokia Software Updater.

  • Nokia E71 problem with New Firmware 410.21.010

    I have updated my Nokia E71 (RM-346) to new firmware 410.21.010. It creating a problem with battery that drain out quickly. Before update, for normal use, I need to charge once a week. But after upgrade new firmware 410.21.010. It finishes in 24 hour for normal use. I have read article that I can not downgrade, just only to wait for next firmware. Have some one any solution?  
    Solved!
    Go to Solution.

    I had a Nokia E71 running very happily on version 3 firmware. I updated the firnware to 410.21.010.
    It worked fine until I switched the phone off and tried to re-start the phone. It stopped working.
    It is my work phone. The messaage on the phone said take it back to my retailer. He tried to get it fixed but because Nokia say it is out of warranty I am out of a phone that is set up to use the Oki system.
    It worked perfectly well until the software update.
    It is now at my retailer waiting for me to collect.
    This is very disappointing.
    Especially as I am now considering not using a Nokia telephone ever again. Moreover, I am sure that Fair Trading would consider this matter very strange and might like ot investigate it further.
    I want my E71 fixed for free by Nokia as it was working without any malfunctions until the firmware update - which was done after receiving notification from Nokia. I have not been able to use the Oki system for some weeks now and would like to contiue using Nokia. Otherwise I guess Nokia lose another customer to iPhone or HTC or Samsung. I await anyone's advice on this matter.

  • WRT54G v6 problems with new firmware

    I performed the mandatory firmware update and soon began having problems such as DNS errors when trying to access web pages and no IP address assigned to secured wireless connections using DHCP.  I reinstalled the earlier version and all of my problems vanished. 
    I tried reinstalling the new firmware several times with the same results each time.  I ran with a backup D-Link DI-524 until I came up with the idea of rolling back the firmware.
    Has anybody else experienced this??

    Hello belbeebala
    You should be able to find older versions at the Linksys ftp site below.
    Just be sure to get the correct one.
    For example, if you have the WRT54G v6, you'll want to be sure you find one that looks something like this:
    wrt54gv5_v6_fw_1.00.9_US_code.zip 
    That version can be found down near the bottom of the link, and is just an example of the 1.00.9 Firmware made specifically for the WRT54G v5 and v6....look very carefully for the one you want/need.
    Good luck.
    ftp://ftp.linksys.com/pub/network

  • Problem with new firmware(v9.41) of 2730c

    I've just updated this firm ware and I don't know why screensaver function is no available! Plz help me!

    You also better , but my 2730c when purchased screensaver option not available

  • Problems with new message alert on home screen (No...

    Not sure if this problem is specific to the Nokia X6 but this is really annoying me! I have contacted Nokia through their form as well as speaking to an advisor...
    Basically, when your phone has been auto-locked, is there a way other than the ridiculous little light flashing once to alert you to a new message? I often have my phone on silent during the day and can’t see this little white light (notification light/menu button). On my previous phone, the whole main screen used to light up when I received a text but I can't find a way to do that on the X6....
    I thought I had found a quick fix as it seems to do it if the screen is unlocked then the backlight will go off, however, then the auto-lock kicks in and I’m back to square one again!! Please can anyone advise me on either:
    1)      If there is a way for the main screen to light up when you receive a message if your phone has been locked (i.e. black screen)
    2)      Or if not, a way to turn off the auto keyguard lock?
    It’s gonna drive me completely round the twist if I can’t find a solution!
    Thanks for your help in advance...

    In answer to the original question, you can change the settings for the noification light under Menu>Settings>Notification light, but there is no way to make the screen light up when locked - the phone is behaving as it is designed to behave.
    In answer to the second issue with the incoming notification stopping altogether, if the factory settings reset has not solved the issue then you can try reformatting the device using the code *#7370#, make a backup with Ovi Suite before doing so but leave out 'Settings' from the backup.
    If the phone contains thousands of SMS messages, this could cause or at least contribute to issues in some phones.
    Please note: Users of Symbian^3 devices should not use device reformatting as a general troubleshooting method, but in older S60 devices like the X6 described here you should not experience any issues as a result.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    - Try a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - Try the remaining items of:
    iOS: Troubleshooting applications purchased from the App Store

  • Before I buy has there been any problems with new 27 iMacs?

    Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

    Hello richard from Folsom:
    Are you inside or outside?  (  I could not resist, I lived in Sactown).
    Anyway, advice is frequently worth what you pay for it, and mine is free.
    If you want it, buy it.  The posts above are right on the mark (except waiting is probably overly-cautious).  The best advice (from anamusic) is to buy the extended warranty - well worth the money.
    Barry 

  • Doesn't recognize my movies with new firmware

    With the new firmware, I can't go to My Movies, where I have a few movies bought from Apple. I get a blank screen and I have to reboot Atv. All the rest works fine (music, tvshows, rent, etc). I guess there is a problem with that firmware and hope it will be solved soon.

    is your appletv modified in any way ?

  • Nokia N80 with NEW Firmware wont sync with PC Suit...

    Hello everyone
    i have my Nokia N80 on 02 network
    i upgraded the old firmware to the new 4.0623 firmware without any problems at all...
    now when i connect to latest version of PC Suite via bluetooth, which used to work fine with the old firmware..
    PC Suite says its connected via bluetooth, but when you go to contacts, and then try tp UPDATE them, it just searches for over 15 minutes, and nothing happens..
    have done everything i can, and nothing works!
    why doesnt it work with new firmware?
    even when i try and SYNC the phone with PC suite, it is having none of it! whats going on?

    have you tried to syncronise with PC sync to see if the sync overall is in order in PC Suite.
    Sometime the PC Sync might work, but the contacts folder sync in Nokia Phone Browser has zillion reasons to be stuck since it is Windwows Explorer inbedded.
    By tryibg to use PC Sync you can narrow down the reasons what can go wrong

  • Problem with N5800 Firmware Update v 40.0.005

    I have a problem with adding contacts to the home screen contacts bar.
    I recently updated the firmware on my 5800 with the new browser and touch screen functions. When I view contacts normally using the contacts icons everything seems OK and all my contacts are there. However, when I add contacts to the contacts bar on the phone's home screen, the list of contacts the phone pulls up includes a number of entries called "unnamed" which I can not see when viewing contacts normally. In this selection list I am also missing some of my contacts that I can see if I view contacts in the normal way? So I am not able to add these to the contacts bar?
    Anyone have any idea what's going on or a fix?
    Thanks. 

    I am on v 51.0.006 and it gives Handwriting, Mini qwerty and Full qwerty options in Landscape mode...and Handwriting, Mini qwerty and Alphaneumeric in portrait mode...
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • SRW224G4 - cant manage with new firmware thru Xmodem (dead after upgrade)

    Hi All,
    Before i wrote this msg, i saw few threads aboud "problem with upgrade firmware". Today i've upgraded my Linksys SRW224G4 to newest 1.2.2b and... after rebot, switch was still rebooting. I found on cisco site how to solve the problem regarding this: http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
    So, i've made RS232 (because i don't have orginal one ; pinout 1-1 2-2 3-3 4-4 5-5) and connected to console
    The problem is with hiting ESC on POST screen. My hyperterminal freezes So, i can't upload my files
    Files:  SRW224G4_fesm-12216.ros ; ls_106-12216.ros ; SRW224G4-1.0.0.61
    ------ Performing the Power-On Self Test (POST) ------
    UART Channel Loopback Test........................PASS
    Testing the System SDRAM..........................PASS
    Boot1 Checksum Test...............................PASS
    Boot2 Checksum Test...............................PASS
    Flash Image Validation Test.......................PASS
    BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
    Linksys SmartSwitch based on 88E6218 with ARM946E-S.
    32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
    Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
    Preparing to decompress...
    100%
    FAIL !!! Check image for valid file.
    Please download a new image.
    Downloading code using XMODEM.
    Download failed
    Perform WARM BOOT ...
    ------ Performing the Power-On Self Test (POST) ------
    UART Channel Loopback Test........................PASS
    Testing the System SDRAM..........................PASS
    Boot1 Checksum Test...............................PASS
    Boot2 Checksum Test...............................PASS
    Flash Image Validation Test.......................PASS
    BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
    Linksys SmartSwitch based on 88E6218 with ARM946E-S.
    32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
    Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
    Preparing to decompress...
    100%
    FAIL !!! Check image for valid file.
    Please download a new image.
    Downloading code using XMODEM.
    When i try to send  SRW224G4_fesm-12216.ros now, HT freezes too
    Guys, what shall i do now ?
    I think the RS232 cable is ok, pinout is linke normal DB9 one-to-one without crossing 2 with 3 pin.
    Best regards, w8ing 4 any help.

    So...
    I've solved it
    Problem was with settings in  HT and sending ESC chacter
    thank U ;D

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

    Hello to the community, I have run into an annoying issue.
    I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
    But everytime I download it, as I click to install, it gives me the message:
    Alert
    This software is not supported on your system.
    But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
    http://support.apple.com/kb/DL1320
    But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
    So I'm completely stuck.
    *Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer.  I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
    I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
    Some help would be greatly appreciated!
    I'm running OS X Mavericks 10.9.2
    mid-2010 Mac Pro
    8 core processor (2 X 2.4gHz)

    According to this article, your EFI firmware is up to date:
    Computer
    Model identifier
    EFI Boot ROM version
    SMC version
    Mac Pro
    Mac Pro (Late 2013)
    MacPro6,1
    MP61.0116.B04 (EFI 2.0)
    2.20f18 (SMC 2.0)
    Mac Pro (Mid 2010)
    MacPro5,1
    MP51.007F.B03 (EFI 1.5)
    Mac Pro (Early 2009)
    MacPro4,1
    MP41.0081.B07 (EFI 1.4)
    Mac Pro (Early 2008)
    MacPro3,1
    MP31.006C.B05 (EFI 1.3)
    Mac Pro (8-core)
    MacPro2,1
    MP21.007F.B06 (EFI 1.2)
    1.15f3 (SMC 1.1)
    Mac Pro (Original)
    MacPro1,1
    MP11.005C.B08 (EFI 1.2)
    1.7f10 (SMC 1.1)
    EFI and SMC firmware updates for Intel-based Macs

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

Maybe you are looking for

  • Javascript error when opening Tag editor

    I have been using dreamweaver 8 for the last month or so. all of a sudden a couple of days a go it started to give me the same error every time i right clicked an input element and clicked the 'Tag Edit <Input>'. The error reads "While executing onLo

  • Safari extensions not in color

    My Safari browser, toolbar and all icons are grey.  Does anyone know if you can install the Safari Extensions someway in which they appear in color ?  ie;  The Weather Channel, Pinterest, Evernote, etc. I've seen other browsers/toolbars where the ico

  • Object Dependancy for CHARS in Easy DMS

    Hi All I have given object Dependancey for some CHARS in SAP DMS.Its working fine in DMS , but when I check the same thing through Easy DMS, the dependancy is not working.. I can see all the CHARS and all Values are displayed there.. Can someone guid

  • Updation of Value Mapping Table

    Hello All, Is there any way in we can update a value mapping table, from some external source, permanently in the ID and not only in the cache. Please do respond. Thanks Neetu

  • Drivers don't work for me.

    I just installed Vista this morning, and the first thing I did was download the drivers for my Sound Blaster X-Fi XtremeMusic. At first, I wasn't even able to get Windows to recognize the sound card as a Creative SB X-Fi card, but that has since been