X3-02 sip settings issue

HI All
Has any one managed to set X3-02 with sip settings from third part provider not supported in Internet Phone settings?
Tried to follow this
Nokia X3-02 with VOIP other than Gizmo5
and I have set it up without any problems and got logged in.
The problem starts when calling as the other person cannot hear me. I can here with no problem but I also hear my own voice (just like echo).

sudude wrote:
Has worked fine for me and on my friends phones as well.
Take a look at this, /t5/Pool-of-Knowledge/Series40-phones-and-VoIP/td-p/1146267
Tried this already and got the it logged in for 12voip as well as justvoip. I can call and I get connected but the communication works only one way which means that the person who I call can not hear a thing. On my site I can hear with no problem and quality is fine.
I presume that there is something wrong with my settings, please see xml uploaded in my phone attached.
sudude Did you create you own xml or used n0kVoIP? I Google it but I cannot get it anywhere.
Attachments:
example.zip ‏2 KB

Similar Messages

  • Why there is a SIP settings if VoIP is not present...

    Hello,
    Kindly ask you to explain subject of this post. There is SIP settings on my C5-03 but I can find how to make an internet call ! Moreover nothing about SIP in official attached phone manual.
    There is an advise to install "SIP_VoIP_3_1_Settings_S60_5_x_v1_0_en.sis" which will create additional menu like "Advanced SIP seetings" but it doesn't help in my case. Probably that old plugin just not capable with new C5-03.
    I can see that this is not only my problem. Please try to resolve this issue, it's very stupid to have SIP settings but not able to make internet VoIP call.
    Best regards,
    another department.

    Hello,
    Thank you for quick reply. But seems that you didn't read my post carefully.
    I have already perform SIP settings and made my phone registered with configured SIP profile.
    Problem is that I can't find how to make VoIP call after that.
    In Nokia E63 it was very simple After dialing the number you need just to choose voice, video or Internet call (using created SIP profile) option.
    But seems R&D just forgot to put it in call options.
    Also given link are leading to already installed "SIP VoIP Settings (SIP_VoIP_3_1_Settings_S60_5_x_v1_0_en.sis)".
    However mentioned  "Menu > Settings > Connectivity > Admin.settings > Net settings > Advanced VoIP settings > VoIP services"
    still not present.
    Same was indicated by other users, shown in my previous post.
    I'm sure that somebody from Nokia is present here, guys, just tell how to make VoIP call using already registered and configured SIP profile, so simple.

  • SIP Lync Issues - calls unable to connect

    Hi,
    For the last couple of weeks I have been unable to make any Lync SIP calls on my home BT Infinity package using HH5.
    Calls simply will not connect. However if I swap the router out the calls connect correctly.
    This was working before so can only presume that BT have 'changed something'.
    Any ideas??

    Hi Nokkyear. I have been having the same exact issue using my E51 since I got the phone two weeks ago. After plenty of stress and anger, I somehow got it to work just a few minutes ago.
    In my case, I made the following change and was finally able to connect and make a test call:
    1> Under Connections/SIP Settings, I changed the PUBLIC USERNAME to the full address (i.e. [email protected]). Previously I had the xxxx portion of the address.
    I had also removed the appearances of the "sip:" prefix from the proxy address, the registrar address and the public username address. I would say that only after I did that, I was able to connect to my SIP server....HOWVEVER, upon review now as I write this post, I can see that the "sip:" prefix has returned to the entries.
    Try this and see how it works.
    LS.

  • Plug in Manager released today doesn't fix print settings issue

    The download page says it improves reliability in Aperture and other apps. But it didn't fix the print settings issue in Aperture. I sent feedback on the problem. Try to hit the print settings button after hitting command P. If you have Aperture 2 and the latest security update the settings won't come up. Look at the top of the list for the Plug In Manager update.
    http://www.apple.com/support/downloads/

    Hopefully an update fixes this. I have had this problem for a long time, tried many different fixes, no luck. Horizontal scrolling works in IE9 however.

  • I have one problem and I think it is a settings issue. When I google the web I get results. Now, when I visit some website and I return to my search results I don't have any markers (diffrent link colour for visited sites in IE).

    Question
    I have one problem and I think it is a settings issue. When I google the web I get results. Now, I visited some website and then I want to return to my search results and pick another search result. And there is a problem: I don't have any markers (diffrent link colour for visited sites in IE) that would help me to distinguish visited and not visited sites.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • N900 - "public user name" in sip settings!

    on symbian n95/n82 phones: sip settings: there is a field "public user name".
    the info there is what the caller id sends to the receiver of the call.
    so i had "sip:[email protected]" (nonoh is my voip service and my mobile is
    registered with them) and the receiver of my calls sees my mobile # calling ...
    not private #, or a strange # that he/she would not care to call back ...
    how can i add this to my settings
    i tried to play with accounts.cfg
    in
    /home/user/.rtcom-accounts/
    but with no effect
    please help!!
    thank u!

    anyone can help?
    thank you!!

  • How to Delete Locked SIP Settings.

    Hello,
    I tried adding one profile to my SIP Settings. It got created successfully but a LOCK SIGN is appearing along with it. and I am not able to DELETE the profile or edit it.
    Can anyone kindly guide me how to DELETE/EDIT it and send the requested information to my mail id [email protected]
    Thanks,
    Pawan.

    try resetting device with the following codes
    With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
    NOTE: In front of the hash key ( #) there is also a STAR key that people often miss and state that the code does not work.
    1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345.
    2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, /GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to configure SIP settings on Nokia E51

    Hello to all.
    I need help. I have
    Username
    Authentication Username
    SIP address
    SIP Password
    Domain
    Outbound Proxy
    in one of big SIPs provider but i cant configure my phone work with it. Please help me. I allready installed SIP Voip settings from nokia store.

    Have you checked out this post upon forum http://discussions.nokia.com/t5/Connectivity/Nokia​-E51-SIP-Settings/m-p/481535/highlight/true#M24073 or this resource?http://www.voip-connections.com/wp-content/uploads​/2011/06/How-to-configure-Nokia-E51-and-E71-to-con​...
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • I am unable to access mail folders on my mac from my iPad: is this s settings issue?

    I keep a selected number of incoming e-mails in subject specific folders on my Mac for future reference. I am able to access all incoming e-mails on both my Mac and my iPad but these mail folders only on my Mac. If this is a settings issue, can anyone advise me how to correct the issue?

    If you are using a POP type email account, no, those folders would not transfer over. They only exist on your Mac.
    If you are using an IMAP type account, it is still possible you created the folders locally on the Mac rather than on the server. You may need to recreate them and then move emails over to the new folders.

  • E65/3com NBX SIP settings

    I cannot get an e65 to successfully register to a 3com NBX SIP server. My settings are
    service profile: IETF
    default access point: AP Profile (this WLAN works and I can connect to the server from internet browsing)
    Public User name: sip:[email protected]
    Compression: no
    Registration: Always on
    use security: no
    Proxy Server
    Address: sip:10.10.10.1
    Realm: None (do not add this to other SIP phones)
    username: 422
    password: xxxx
    Loose Routing: No
    Transport Type: UDP (Have tried all three)
    Port: 5060 (This is as set on Server)
    Registrar Server
    address: sip:10.10.10.1
    Realm: None
    Username: 422
    Password: xxxx
    Loose Routing: No
    Transport: UDP
    Port: 5060
    Both Proxy and Registration Servers are set the same as they are the same Box. I'm not sure what to do with "Realm", my other SIP phones do not require this setting. Memory cards are no in, Is this a problem?
    Regards,
    Adam

    I dont think I can remove the password, the user profile created on the 3Com NBX must have a password set. I tried the following setting but still get a failed to connect message. Is there documentation on what all the SIP settings are? eg. use security? use compression?
    service profile: IETF
    default access point: AP Profile (this WLAN works and I can connect to the server from internet browsing)
    Public User name: sip:[email protected]
    Compression: no
    Registration: Always on
    use security: no
    Proxy Server
    Address: sip:10.10.10.1
    Realm: None 10.10.10.1
    username: 422
    password: xxxx
    Loose Routing: Yes
    Transport Type: UDP (Have tried all three)
    Port: 5060 (This is as set on Server)
    Registrar Server
    address: sip:10.10.10.1
    Realm: 10.10.10.1
    Username: 422
    Password: xxxx
    Loose Routing: Yes
    Transport: UDP
    Port: 5060
    Regards,
    Adam

  • SIP settings for Nokia N95

    Hi All,
    Can anybody provide detailed guide on how to make SIP settings for N95 so that I can use internet telephony thru my router?
    Thanks in advance.

    It'll involve using a proxy put at your disposal by your VoIP provider. Contact them for more details. People here can't help you because they have no reason to know your provider's settings.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Nokia E51 SIP Settings

    For those of you who may be looking for the SIP Settings of your Nokia E51 (maybe this is also applicable to other Nokia models)
    I found the solution in: http://www.daniweb.com/blogs/entry2352.html#
    But I'm using Voipbuster & so the settings hereunder are for that voip service.
    You may just have to change the values depending on your account and voip service provider.
    Voipbuster settings for Nokia E51:
    Profile Name: Voipbuster
    Service Profile: IETF
    Default Access Point: Whatever your access point name is.
    Public user name: sip:[email protected]
    Use Compression: No
    Registration: Always on
    Use Security: no
    Proxy Server:
    Proxy Server Address: sip:sip.voipbuster.com
    Realm: sip.voipbuster.com
    Username: XXXXXXX
    Password: XXXX
    Allow loose routing: yes
    Transport Type: UDP
    Port: 5060
    Registrar Server:
    Registrar server address: sip:sip.voipbuster.com
    Realm: sip.voipbuster.com
    User name: XXXXXXX
    Password: XXXX
    Transport Type: UDP
    Port: 5060

    What do you mean by "caller ID to work"?
    First of all, does the SIP settings of Justvoip work with your E52?
    http://justvoip.com/en/sipp.html
    Or the SIP settings work but you are just asking about the name/number that appears on your friends' display screen when you call them?
    As Justvoip & Voipbuster are both from Betamax, I guess it's the same system.
    You can't just put any number that you want to appear as your caller ID.
    As I said in my previous post, you must register those numbers first as your official caller ID number in Justvoip/Voipbuster.

  • SIP settings on nokia X6

    I just got an X6. I don't have experience with any other nokia smart phones.
    So what is the function of SIP settings under Settings->connectivity->admin settings? Is it supposed to allow you to make VOIP calls? I read in the forums that a lot other phones can be made doing so. If this is the case, how do I setup my profile? I keep on getting "registration fail"

    To be able to make voip calls on your phone you will also need to install a voip settings application. I do not know if this is supported on the X6, it is not listed here:
    http://www.forum.nokia.com/Technology_Topics/Mobile_Technologies/VoIP/Nokia_VoIP_Framework/VoIP_supp...
    You can try installing the S60V5 version you can download from here: http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin...

  • Project Online Time Zone Settings Issues

    We just start use Project Online for our project management.  We set the SharePoint Online > Site Settings >
    Regional Settings to "(UTC +08:00) Kuala Lumpur, Singapore" and we are confirm that our host located either in Singapore or Hong Kong.   However, we found that the date and time display in the check-out/in
    project message, in the PDP-Workflow Status page, task submission, and the Administration Settings that has time references are different with our timezone.
    We sent Service Request to Microsoft Support and we been advised to wait for the next version of Project Online. To avoid the confuse happen to our Project Team, we have to set the Regional Settings back to "(UTC -08:00) Pacific Time (US and
    Canada)". However, this is 16 hours different
    in our region!
    We all know that time is very important in a project management and reporting.  We have >30 on-going projects in the Project Online and some of them are estimate to take years to complete.  
    Therefore, anybody faced this issue and appreciate it if you could give us any advice or sharing any workaround here.  Thank you in advance.

    Hi Paul,
    Is the timezone mismatch only present in the checkout/check-in notification displayed on the PDPs?
    Thanks,
    Roland
    Hi Roland,
    I noticed it happen in:-
    "Entry Date" and "Completion Date" for PDP - WorkflowStageStatus in the All Workflow Stage list. (if you are using Enterprise Project)
    Check-out/Check-in notification displayed in PDP - Schedule, and some columns' datetime value in the Schedule.
    Synchronization date and time that displayed in PWA Settings - Manage User Sync Settings. (if you are using Project Permission Mode)
    Task Submission date and time.
    ~Kim

  • Verizon Quantum Gateway Router settings issue related to printing and wifi cameras?

    Hi,
    I have a Verizon Quantum Gateway router and I just did a fresh install of Windows 8.1 Pro x64 and am downloading and installing my printer drivers.  I connect the printer to the wifi network, 100% sure it is connected and settings are set to wireless lan.  I've had this printer for a while.  Doing the setup - it cannot find the printer.
    Related: I bought a 2 pack of Motorola Focus66 wifi cameras to watch my dogs when I'm gone.  I can connect to the cameras when I'm on my ipad's Verizon Wireless LTE connection, but when I'm at home connected to my same Verizon Fios wifi I cannot view cameras.  Yes - the camera and apps support local and remote connections.
    I have turned the firewalls all the way off and this does not fix the problems, so I'm believing it is in the router settings.  Any suggestions?

    I had a wifi network running at my house with a PC, Laptop, 5 iphones an iPad, and an XBox all running with no issues..  I got the "Upgrade" of the Gateway router and I can connect those devices to the network but WiFi printing is screwed up and Air Printing the apple devices is totally dead..  cannot see the printer.  The customer support are completely a waste..  they suggested I pay for "Premium Support"  At this point I've invested a solid 10-15 hours trying to get this setup and talking to Verizon and its just a mess. 

Maybe you are looking for