X3-02 touchscreen doesn't work!!!

i've a big problem with my phone, the nokia X3-02.......i've already upgraded the firmware, but it doesn't happen anything! The touchscreen doens't reply well when I touch it. Anyone have already had this problem?? EX. when I go in the address book, the phone start go up and down crazily and i cannot use it properly. I think i need to replace my touchscreen....
Solved!
Go to Solution.

Hi x3_02user,
Welcome to the Nokia forum.
Please update or reinstall the phone's software with Nokia Suite. Click on the green arrow to see all available updates. If none are availalbe, you will be able to reinstall the current software. This option will be displayed in blue.
Don't forget to make a back up first, go to Tools > Back up in Nokia Suite to securely backup all your data. 
If the touch screen still doesn't work well after the update, please visit a local Care centre, like was already suggested.
Let me know how you get on!
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Similar Messages

  • Need to back up contacts but touchscreen doesn't work

    I have a Samsung Brightside that the touchscreen doesn't work.  i want to back up my contacts and can navigate to the Media Center by the slide keyboard but can't go any further

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive

  • My ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

    my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

    It might be time to contact Apple for an out of warranty repair (actually replacement)
    See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Replacement for any model iPad 2 is $249

  • I need to backup my iPhone, but it is locked and the touchscreen doesn't work

    So I dropped my 3 year old iphone in the toilet and now the touchscreen doesn't work.  I want to backup the information so I can transfer my apps to the new phone, but I have my phone locked and I cannot enter the code because, as I said, the touchscreen doesn't work.  How can I back up my old phone?

    If you back it up using the computer it normally syncs to, you won't be prompted for the passcode. If you have not been syncing it with a computer, then you're pretty much out of luck at this point.

  • My touchscreen doesn't work properly when I'm on louspeaker

    Can someone please help me as my touchscreen doesn't work while i use my phone on loudspeaker

    Hello, Dean6.
    Thank you for the question.  You may find this article helpful in troubleshooting your touchscreen response issue that you are experiencing. 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Cheers,
    Jason H. 

  • I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

    I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes

    The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it

  • My touchscreen doesn't work as it should.

    My touchscreen doesn't work as it should. I can't touch the field / Selektion I like to, 'cause the screen is trembling and scrolling without any direct touch from me. It even reacts when my finger is about 1-2 cm away from the screen. The ipod didn't fall down or had any other accident. It's an iPod 16gb 2nd generation. What can I do?

    That was my first thought. I even put off the shield which I had stucked on to protect the iPod from dirt and scratches. But it stays the same.
    But I deleted some apps which I had installed yesterday a few minutes ago, maybe it will work now... Hopefully...

  • My touchscreen doesn't works anymore?

    Yesterday my ipod fel in the sink, in the water, and I quikly took my ipod out and I've made it clean. My ipod still works, but mt touchscreen doesn't works anymore. Can somebody help me?

    Try here.  
    iPhone and iPod touch: Troubleshooting touchscreen response

  • Touchscreen doesn't work. i can slide down to access date but can't unlock

    touchscreen doesn't work. i can slide down to access date but can't unlock

    http://support.apple.com/kb/ts2802
    Try some of the steps in the Display section of the above link.

  • Touchscreen doesn't work anymore

    hi there ,
    I have an issue with my pavilion 22 all in one ,it is ony 1 month old ,and the touchscreen doesn't work anymore ,i refreshed the computer one and it worked but i cannot carry this way :'( any suggestions please ?
    thanks
    beadswire

    I have a different type of TouchSmart, but this may work for you:
    Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
    Select Device Manager from the list.
    Click the little arrow next to Human Interface Devices to expand the list.
    Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
    Right-click, and select Enable from the list.
    Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
    On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
    If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
    In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
    ~Lil.Liebe
    Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
    Click Accept as Solution on a reply that solves your issue to help others in search of answers.

  • Problem with the screen (touchscreen doesn´t work)

    A friend gave me his iPhone to check it because when you try to unlock it it tell you to slide but nothing happens it touch it but is like if the iPhone dont recognize that you are touching it
    Please Help
    (touchscreen doesn´t work)
    Message was edited by: Dylanss

    I've never seen Apple say that unlocking voids the hardware warranty.
    Nor have I seen Apple say that unlocking violates the software agreement, since unlocking in the USA is very likely to be exempt from doing so.
    I'm trying to locate a link to Apple's statement, but it should be crystal clear to any well educated person that the following came from an Apple statement.
    This article is dated 9/25/07.
    http://www.infoworld.com/article/07/09/25/iPhone-hacks-void-warranty_1.html
    +Less than a week after CEO Steve Jobs said that Apple would fight hacks that unlocked the iPhone, *the company said _any modification, unlocks included_, voids the phone's warranty.* Saying it had found that many of the unlocking programs "cause irreparable damage to the iPhone's software," Apple spelled out the policy. *"Users who make unauthorized modifications to the software on their iPhone violate their iPhone software license agreement and void their warranty,"* the company said in a statement. "The permanent inability to use an iPhone due to installing software is not covered under the iPhone's warranty."+

  • My touchscreen doesn't work, what happened? how can I fix it?

    Everything else works, the volume, the home button, the sleep/wake, etc. but the touchscreen doesn´t

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My touchscreen doesn't work!

    I have an Ipod touch 4th generation and a couple days ago, my touchscreen just stopped working in certain places. It has a password so when I can actually access the lock keypad, I can only tap 4, 5, and 6. One, 2, 3, 7, 8, and 9 will not respond to any touch. Has that ever happened to anyone and if so, how did you solve it? Maybe someone with ideas. I've already turned it off and back on, reset it by holding the lock and home button, and I've plugged it into my computer. No progress. Suggestions? Please and thank you!

    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • My ipad touchscreen doesn't work at all, I can't even turn the ipad off does anyone know what to do?

    Can you help me, i have no idea wha has happen to my ipad and it is also saying 'not enough storage', the touchscreen isn't working at all. If you can help i would be so grateful. Many Thanks.

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Xperia Z3 - TouchScreen doesn´t work - tired of Sony!!!

    The back glass was broken only two weeks to buy the equipment. Now the top of the touchscreen is not working . I'm tired of Sony !
    I'm Sony User for over 10 years , I have purchased at least 7 Vaio Notebooks , bought the Xperia Z1 and immerse me did not work , now bought the Z3 and this happening to me !
    I want a solution!

    Sorry to hear this but you would need to either return your device to the place of purchase or contact Xperia care and have your device inspected http://www.sonymobile.com/global-en/support/contact-us/

Maybe you are looking for

  • WBS Element ( Billing element ) assignment  at sales order header level

    HI, There is provision of assign WBS Element at sales order header as well as item level , If Project WBS Element is assigned for each line item delivery  and stock updating is happening from the project, But WBSE will assign at sales order Header  s

  • Does iPhoto alter images when importing from camera ?(+ tip for slideshow)

    I came across the following article: http://www.andrewburke.orconhosting.net.nz/mac/builtin.htm#photo The claim here is that during import iPhoto alters images in some way. The iPhoto experts, Terence OldToad, LarryHN and others, could you please com

  • Partner Functions not appearing

    Hi When the PO is created manually, the Partner Function is being picked up from the Vendor Master. But when the PO is created for the same vendor with reference to the PR, the Partner Functions are not being populated in PO. The Vendor Master has Pa

  • Event case missing mouse events on active-x component

    I am using a Treeview and capturing selections in the tree using mouse events (event structure). I have a problem where approx 3 out of 15 mouse events are not actioned by the event structure - has anyone else had this problem or is there any suggest

  • DVCPRO HD - Non Drop Time Line?

    I am just beginning to edit a project with all DVCPRO-HD media. Does anyone know if it is important to deselect the 'Drop Frame' choice in the User Preferences Timeline tab?