X3 gets freezed after 15 minutes of swithching it ...

Please help me
my X3 gets freezed after 15 minutes of swithching it on and its volume key is also not working. i ve tried reinserting battery and sim but nothing improves. plz help immidiately

try removing the battery and memo card for 5 mins then start up again also check for a software update
free up your memo by removing unwanted items such as images,videos etc
also try keep your message folders to a minimum if you have alot of text remove them clear your inbox and sent folders
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

[SOLVED] Getting freezes after using dwm for some time and exiting it

Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)

I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]---

Lion Mountain get freeze after sleep or stand by (Wifi problem)

Hi, since i install my new Lion Mountain i discover a several problem, every time thet my (macbook pro 15" middle 2010) go to slepping mode or stand by and i start over use it the network (wifi icon on top) try over and over again to get connect, about 1 minute later appears the rainbow icon on my mouse and the the aplications like safari, mail, itunes get frezze and i can restore with force quit, so i have to force shutdown holding the power button 10 seconds.
Any help? something wrong? someone with the same issue?
Thanks for your time and help
(Also i install the lion mountain in my IMAC and works ok, but the notification center dont work with the email receive? any idea)

Hi, since i install my new Lion Mountain i discover a several problem, every time thet my (macbook pro 15" middle 2010) go to slepping mode or stand by and i start over use it the network (wifi icon on top) try over and over again to get connect, about 1 minute later appears the rainbow icon on my mouse and the the aplications like safari, mail, itunes get frezze and i can restore with force quit, so i have to force shutdown holding the power button 10 seconds.
Any help? something wrong? someone with the same issue?
Thanks for your time and help
(Also i install the lion mountain in my IMAC and works ok, but the notification center dont work with the email receive? any idea)

HD Channels freeze after 5 minutes

Since the launch of BT sport my HD channels including new BT sport freeze after about 5 minutes. Help suggests I restart Home Hub and BT vision box. This gets the system going for the next 5 minutes. Note this is the behaviour whether accessing BT sport or BBC1 HD. I can actually get the channel to unfreeze by simply changing channels so its not really necessary to reboot all the boxes. Unfortunately this approach does not work when trying to record your favourite football team.
Other details: BT Vision box is connected to Home Hub by powerline adaptors and I often get a message with error VMC999 complaining of a slow connection.
What is particularly irritating is that I have a new Samsung smart TV which displays all HD channels perfectly (via Freeview) and seamlessly streams HD on demand content by connecting wirelessly to the BT router.
I have made two attempts this week to contact BT (0800...) but abandonned them as there are'nt enough hours in the day.
So what I propose do is to "enjoy" my "free" BT sport channels (I have infinity account), cancel my BT Vision subscription (if BT ever pick up the phone) and subscribe to Netflix, Blinkbox, etc.
If anyone has any practical or technical suggestions please comment.
Mike

sleekstone wrote:
Since the launch of BT sport my HD channels including new BT sport freeze after about 5 minutes. Help suggests I restart Home Hub and BT vision box. This gets the system going for the next 5 minutes. Note this is the behaviour whether accessing BT sport or BBC1 HD. I can actually get the channel to unfreeze by simply changing channels so its not really necessary to reboot all the boxes. Unfortunately this approach does not work when trying to record your favourite football team.
Other details: BT Vision box is connected to Home Hub by powerline adaptors and I often get a message with error VMC999 complaining of a slow connection.
What is particularly irritating is that I have a new Samsung smart TV which displays all HD channels perfectly (via Freeview) and seamlessly streams HD on demand content by connecting wirelessly to the BT router.
Did you manage to try using an ethernet cable rather than the power line adapters (PLA's)? Did this solve the problem? As others mentioned the PLA's are probably causing the VMC999 error. You need a reliable connection to the Vision+ box for the multicast channels to work smoothly. Being live channels they have to work in a slightly different way to on-demand content.
If after trying a cable you still get the multicast channels freezing after approx 5 mins every time you try to view/record them then you are not the only one. In that case I suggest you read this thread I created a while back. I got it fixed for my line, but it still seems to be affecting some customers now. Get your stopwatch out!
http://community.bt.com/t5/BT-Vision/Multicast-VMC011-after-4-min-16-sec/td-p/871660

Photoshop CC freezing after a minute or so... HELP!

Hi,
Im using a retina macbook pro 13inch w/ the latest version of photoshop cc.
i've been using cc for a while now and its been fine, until late last week, I was pretty sure I applied an update, and its since been freezing after about a minute or so, then i get the spinning colour wheel of death and nothing happens. I have an incredibly urgent dealine to meet and am working remotely so I despreately need to get this solved.
Here's what ive tried to solve the issue but to no avail...
• logged out of creative cloud and logged back in
• uninstalled photoshop cc and reinstaled again
• restarted my machine
• removed any third party plugins and scripts
and still the same problem happens.
PLEASE HELP!! - Many thanks

turns out its a corrupt font thats been doing this:
http://forums.adobe.com/message/5952089#5952089

IBook G4 freezes after 10 minutes

my iBook G4 freezes after a few minutes of use.
it starts up but freezes after around 10 minutes (variable 5 - 20 mins). The screen is frozen and no keyboard or mouse input is accepted. Only way out I found was to power-off. This happens from cold.
When warm, it freezes on startup with blue screen.
I have been able to clear the disc and reload MAC OS from install discs and the symptoms are identical. There are no modifications, no devices connected, no network connection and the wifi is turned off. It makes no difference whether the battery is removed and run on power supply or simply run on fullycharged battery.
I tried:
1. remove/replace wifi card and memory check connections OK.
2. Startup from install disc and repaired disc, although it was OK. Disc seems to be fine.
3. Reset PROM.
4. stored the iBook in a cold place and it ran for longer.
5. Ran a temperture monitor - all temperatures are OK.
6. I have tried using the latest MAC OS 10.4 and the original one supplied with th iBook (10.3).
I do not think it is a disc, airport card, cooling fan or battery fault. It could be a memory module failure or some motherboard fault. Its not software or driver.
I think the only thing left is that some hardware fails when it gets wram and works agin when cold. The colder t is to at startup, the longer it works for.
I have now run out of ideas.

It ran long enough to install from disc-1 then froze. After restarting, it asked for disc-2 and that loaded then froze. After restarting, it worked a short while then froze. To get this far, I left the iBook in a cold place before starting it up and this extended the runtime from the normal 5 minutes to as much as 25 minutes.
I disconnected the disc and it behaved the same while starting from the CD drive so I think the disc is OK or its more than one cause.
This feels like a dry solder joint problem, to me - applying pressure on the motherboard or lowering the temperature will temporarily fix it for a few minutes.
If I pay for a repair then, statistically, it will last 3 months longer so its too risky. It would not be so bad if Apple could repair it with confidence that it will not have the same problem again, but to do that they would have to admit to what causes the this problem with so many iBooks.

Video Playback Freezes After 25-30 minutes

Hey everyone, I've recently run into a problem with my iphone. Any videos I watch freeze after about 25-30 minutes of viewing.
Basically, it'll pause without my doing anything, then I'll be able to hit play again, at which point it'll play for another 30 seconds or so before freezing again.
When I back out to the homescreen and replay, I get the same thing.
After I quit the ipod app in frustration, little snippets of sound will play randomly from different videos. It's really odd.
This is happening consistently with both video podcasts, rips from DVDs, etc. Any video after 25-30 minutes.
I've attempted to quit the ipod app, run the "free memory" app, all to no avail.
Any ideas?
Some details:
I'm running 3.1
I have about 775MBs of free space on the iphone.
Problems are occurring with both .mov and .m4v...
Thanks!

Well, well, well, iphone 3.1.2 just released and what do we see in the release notes?
- Fixes bug that could cause occasional crash during video streaming.
Here's hoping. I'm going to test it and see if this fixes my problem. I'll report back in an hour or so...

Arch freezes after about 10 minutes with new kernel [SOLVED]

As the title says: Arch freezes after about 10 minutes with new kernel (2.6.27). I can only move a mouse, but everything else is frozen. Even restarting X doesn't do a trick. It doesn't work at all. Frozen.
I don't get any kind of error message (oh really?), so what's the problem..?
Last edited by Exitium (2008-10-22 15:29:27)

juan_sck wrote:
Exitium wrote:
test1000 wrote:I had an issue with only being able to move the mouse after logging in from gdm and nothing happening but i don't know if thats the same error Sooo, are you using the right nvidia drivers? their driverpolicy just changed, and we now have 4 different official nvidia drivers in repo :S
Yeah... I'm using nvidia... So the problem is nvidia drivers, not the Linux kernel?
Edit: My card is nVidia GeForce 8800 Ultra. I can't get driver information now, because I'm using WinXP right now. I'll check it later.
Did you make a new install or just updated?
You can try to reinstall old kernel with:
pacman -U /var/cache/pacman/pkg/kernel(version you want).pkg.tar.gz
if you made a new install you may have to install the xorg keyboard driver and so.
By the way, there are a few diferent packages for nvidia drivers. Check wich is yours.
Also check /var/log/ folder for errors.
Updated kernel.
And as I said, I'll check the driver later.

My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up.

My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up the computer.
Sometimes it beeps after freezing, and keeps beeping forever until I shut down the computer by pressing the power button.
Other times the screen gets a little darker and a text appears saying I need to turn off the computer by pressing the power button and restart, but after restarting the computer freezes again. Each time I turn it on it takes only a few minutes to freeze it seams, about 2-3 minutes or less, and occasionaly it doesn´t even start up.
I don´t recall the exact version of the operating system, its MacOSX (10.6 or something)
Any sollutions?

Three beeps is usually indicative of a RAM problem. Take out one RAM chip and see what happens and then swap with the other one. See if there is a difference. Also engage the Apple hardware test and see if that offers any useful information.
Ciao.

PPro CC14 won't stop crashing and freezing only minutes after editing commences...

I seem to have tried everything to fix the issue but PPro CC14 won't stop crashing and freezing only minutes after editing commences. I am working on a Mac and have just updated to Mavericks as a final attempt to help solve the problem. I have tried calling Adobe but their phone support in Australia is shocking. I have resorted to posting here but haven't had any help yet. I really need to sort this issue out ASAP.

Its it possibly related to your graphics drivers? Seems similar to something I was experiencing that was resolved by updating my nvida cuda drivers (see thread link). I also started running activity monitor to keep track of the memory and processor use. That said after solving the problem by updating my drivers and switching to the CUDA acceleration, on occasion I get into ruts where it opens and freezes all the time. It does seem helpful to try and reduce project size if possible - I normal keep a track record of sequence revisions and such, but when possible it seems that clearing out as much as possible by deleting or project managing into a new project can help things run better.
Premiere CC Crash - 'Your Mac OS X startup disc has no more space available for application memory'

FCP 4.0 issue - using capture now, freezes after 5 minutes

Capturing miniDV to FCP 4.0 using capture now on external drive. Never had any problems in the past, but now FCP freezes after a little more than 5 minutes of capturing. I have to force quit. When I find the file on my hard drive it's about 10 GB. Haven't used FCP in several months. Is it possible some settings got screwed up? No problem capturing via iMovie 4.0 so the problem doesn't seem to be with the drive.
Any assistance would be very much appreciated.
Nick
Message was edited by: nlevitin

Just to reiterate what Shane and David told you. Updating to QT 7.4 is probably not going to solve your issue. It might make things worse though. You need to do what they said and get your quicktime version they recommended. Now, if it works for you, fantastic, but there have been enough posts on this topic and chances are very slim to null that QT 7.4 will work for your version of Final Cut.
And please be prepared to do an erase and install if the archive and install does not work.
One more idea might be to use a program called Pacifist. (Search the forum for Quicktime and Pacifist) You may be able to use that. Anyone can correct me if I am wrong here.
-Albert

Mac freezes after 10 minutes, hard drive and sata cable replaced

MacBook Pro (MacBook Pro 15" Unibody 2.53 GHz Mid 2009) froze about a month ago. Computer would get slow and then just stop responding. Wouldn't even respond to force quit commands. Press and hold power button only way to free it up.
Directory Scan, Volume Structure failed. Bad Blocks.
Purchased new hard drive (Western Digital Blue 320 GB Mobile Hard Drive: 2.5 Inch, 5400 RPM, SATA II, 8 MB Cache) and replaced. Try restore from time machine, fails - freezes up with about 20 minutes remaining to finish.
Got a USB SATA cable (external) and new SATA cable (internal) for computer.
The drive and computer work fine when connected via external USB. Ran Apple Harware Test (ok), reset NVRAM, all software is up to date.
I replaced SATA cable in computer and tried drive internal - same problems. Still freezes after working for just a short while.
So to sum it up, new drive works via external USB but not when installed internally.
Any ideas what it could be? Did I buy the wrong drive? Do I have two bad SATA cables? Something else entirely?
Thanks! Mike

On you picture going from right to left. the cables are/WIFI/Optical Drive/Hard Drive/ Battery. What you have circled is the cable for the Hard Drive. Sometimes you can have a little extra tape on the connector. I would not use it as a grab point to remove an reseat the cable. You would want to carefully pull the cable loose and make sure there is no separation in it and then reseat it. I cannot see your hard drive in the picture,so I do not know if you have the sata or ssd drive. If it is the sata drive ,do you hear any light clicking noise when you startup? This would mean that you have possible drive damage. If you have a ssd drive (solid state drive) it is not possible to damage the drive by jarring it as there are no moving parts. Make sure all connection cables are fully seated. Include reseating of memory. If in recovery/utilities/disk utilities/ your startup volume does not show, that is problematic.There is single user and SMC reset. after that I do not know what to advise.https://support.apple.com/en-us/HT201295 https://support.apple.com/en-us/HT203176

Satellite P500-F12 - Freezes after 5 minutes gaming

I recently purchased a toshiba P500-12F laptop with the below specs, the problem i am having is that every time i try to start a game such as Mount and blade or empire total war, the game works for between 5-10 mins, but then freezes completely and the laptop starts to make a loud buzzing sound. The only way to get out of this is to press down the power button until it shuts down. I do not get the problem with anything other than these type of games and i dont know why it is doing this, any help or adivce would be welcome.
Bradders.
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: SATELLITE P500
BIOS: PhoenixBIOS 4.0 Release 6.1
Processor: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz (2 CPUs), ~2.5GHz
Memory: 4096MB RAM
Available OS Memory: 4060MB RAM
Page File: 1641MB used, 6478MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
Card name: NVIDIA GeForce GT 230M
Manufacturer: NVIDIA
Chip type: GeForce GT 230M
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0A28&SUBSYS_FF501179&REV_A2
Display Memory: 2781 MB
Dedicated Memory: 1007 MB
Shared Memory: 1774 MB
Current Mode: 1680 x 945 (32 bit) (60Hz)
Message was edited by: Bradders_1

Hi
The forum already contains such threads where notebooks freezes after 5 or 10 minutes of gaming. Did you read them?
At the moment its not easy to say what is causing this problem but first of all you should install the latest display driver from Toshiba. Dont use non-Toshiba drivers because they can cause this overheating!!
Make also sure that you are using the latest BIOS version and its useful to clean the notebook from to time using compressed air spray.

Keyboard and trackpad freeze after being idle for a few minutes

I have a early 2008 MBP and just today the keyboard and trackpad freeze after not using it for a few minutes. I was at work when it happened. I plugged it in and started doing something else and a few minutes later came back and i couldn't move the mouse or do anything with the keyboard, but processes were still running. For example, I have a fan speed app that sits in the toolbar, and it was still showing current fan speed. So I restarted it, and it did it again. So the next time it happened, I closed the lid and opened it up and it fixed it. It's happened several times now after a few minutes of non use and I just close the lid and it fixes it. Also, there was a period when I was using my computer for a couple of hours non stop and it didn't have a problem. Only when I'm not touching the keyboard or trackpad does it do it. since this keeps happening i have verified the disk in disk utility, done a hardware reset with cmd+opt+p+r, ran through system profiler to see if there were any problems with no results, and it still does it. Anyone have any ideas?
It should be noted that not only does the battery not work for more than about 2 minutes, the left I/O board appears to be dying. The power chord takes a considerable amount of wiggling and adjusting before it finds a place where it will actually charge. The audio out and the USB on that side are the same way. So I am aware of that problem. Also, I have had to take out the right side fan multiple times and disassemble and oil the bearing because it's going bad, which requires taking the top plate off, but I haven't had to do that for over 6 months. In my mind if the problem was caused by taking the top plate off, that would fry the entire top plate, which happened once when a technitian at a local company took the computer apart for a waranty repair. All of these problems considered, I don't think they would have anything to do with the fact that the mouse and keyboard suddenly won't work after about 5-10 minutes of sitting idle. I have done nothing different since yesterday that would explain why it does this.
Also, I can't do anything with the install disk because the CD drive is dead. But that's mostly because it was a piece of garbage to begin with.
Any Ideas would be helpful.

After doing some more digging I was watching processes in Activity Monitor to see if I could see what process is failing. I think the problem with with Chrome. It only happened when Chrome was open. And since then I reinstalled it and the problem has so far gone away. So, I think the problems is solved.

The screen of my mac gets black, while the same the youtube works normally and the buttons maintain the blue color. What should I do?? It gets over after 5 to ten minutes and I only have it 2 weeks..

The screen of my mac gets black, while the same the youtube works normally and the buttons maintain the blue color. What should I do?? It gets over after 5 to ten minutes and I only have it 2 weeks..

Welcome to Apple Support Communities
As this may be a hardware problem, make a backup of your files onto an external drive with Time Machine (if you have important files) and take the Mac to an Apple Store or reseller, or contact with Apple > http://support.apple.com/kb/HE57 You will get your Mac replaced or repaired for free.

X3 gets freezed after 15 minutes of swithching it ...

Similar Messages

Maybe you are looking for