X3 touch - Problem with menu

Only had my X3 Touch for just over a week, all seems to have being working fine.
Up until today where I can no longer access the menu by pressing the touch screen.
The screen is basically showing i am pressing it, but does not go to the menu screen,
all other screen functions are working fine along with the number pad.
I've already tried turning off and taking battery out for 30mins.
Once started back up still have same problem.
Anyone had the same problem.
B

I have the same problem - I cant unlock or get into menu - calibrating screen dosent fix it. It seems particularly bad after being in my pocket for a period. Lots of owners having similar problems on other forums with this model. Any solution ? Its just one month old

Similar Messages

Zen Touch: problem with touch pad and formatt

Hi guys!
I have a Zen Touch 20gb but I'm experiencing big problems with my touch pad: it really doesn't work fine, precision is almost none, to poit the desired voice in any menu I have to work hard. If the menu is longer it is almost impossible to navigate it with precision. I can't move of a single position, it jumps at least two... Is it a common problem or should I take it to be checked up?
2nd problem:
I was trying to format the player's HD. Instructions said press play botton and contemporarly reset hole.
But nothing happens. When I release the system reboots.
Any idea?
Thanx!
Gp

Please be patient with the touch pad. Reading these boards, I think a lot of people are not really understanding how the touch pad works and assuming it's defecti've and returning the Touch. First, set the sensitivity to where it's best for you. If you can't move only one line at a time, you may have it set too sensiti've. Second, use your index finger, not your thumb. Then, practice moving around. For me, it was really easy to move rapidly through the choices or to move just one line at a time. But moving at medium speed always tripped me up, until I figured out the technique of repeatedly stroking the touch pad through the slow zone to move several lines at a time, just like you were using a scroll wheel.

Problem with menu and panel

hi,
i m new to java still learning new concepts. When i was working with menu and panel i got this problem and i tried a lot but still i havn't got any success. the problem is i m creating a menu with two menuitem - one for "add item" and another for "modify item". What i want to do that on the same frame i want to create two panel of these two item. when i click "add item" option it should show add window and so with modify option. but the problem is if i click add item it shows the addpanel but when i click modify option (add item panel goes- ok ..) but it doesn't show the modify panel, it shows only the main frame on which menu is there.
i cannot understant what is happing here plz guide me.
thanx

import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import javax.swing.*;
public class ajitAutomobile extends JFrame implements ActionListener
     JMenuBar mb;
     JMenu jobmenu;
     JMenuItem newJobCard,modifyJobCard;
     Font ft;
     JPanel pnlnewJobCard,pnlmodifyJobCard;
     Container con;
     ajitAutomobile()
     ft=new Font("Arial",0,12);
     mb=new JMenuBar();
     setJMenuBar(mb);
     jobmenu=new JMenu(" Job Card Form");
     mb.add(jobmenu).setFont(ft);
     newJobCard=new JMenuItem("New Job Card Detail");
     modifyJobCard=new JMenuItem("Modify Job Card Detail");
     jobmenu.add(newJobCard).setFont(ft);
     jobmenu.add(modifyJobCard).setFont(ft);
     mb.add(requisition).setFont(ft);
     con=getContentPane();
     // setting panel for new JOb Card Entry
     pnlnewJobCard=new JPanel();
     pnlmodifyJobCard=new JPanel();
     con.add(pnlmodifyJobCard);
     con.add(pnlnewJobCard);
     pnlnewJobCard.setBackground(Color.RED);
     pnlnewJobCard.setVisible(false);
     pnlmodifyJobCard.setBackground(Color.YELLOW);
     pnlmodifyJobCard.setVisible(false);
     //setting JFrame resources
     setVisible(true);
     setTitle("Ajit Automobile Service Center");
     setSize(750,300);
     setResizable(false);
     newJobCard.addActionListener(this);
     modifyJobCard.addActionListener(this);
     public void actionPerformed(ActionEvent ae)
          if (ae.getSource()==newJobCard)
               pnlnewJobCard.setVisible(true);
                                                                pnlmodifyJobCard.setVisible(false);
          if(ae.getSource()==modifyJobCard)
                                                                         pnlnewJobCard.setVisible(false);
                                                                pnlmodifyJobCard.setVisible(true);
     public static void main(String args[])
     ajitAutomobile objajit=new ajitAutomobile();
     objajit.show();
}so, this is the code and as i m expecting that when i click on "New Job Card Detail" then it should display pnlnewJobCard and when i will click "Modify Job Card Detail" it should display pnlmodifyJobCard panel but it is not working.It shows only that panel which is clicked first.
plz help
thnx, any answer will be appriciated.

Touch problem with 5233

i've bought a new 5233 and its having a touch problem which is displaced slightly upwards....i.e. touching a key works slightly in upward direction...and i had updated my software and also used the factory restore and soft restore options but its not correcting....(((
some one plz tell me whats the genuine prob with my cell....am worry..(

Refer Pg. No. 125 of the User Guide..
http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_5233_APAC_UG_in_en.pdf
.. and Calibrate the Screen. See if that makes any difference...

Toshiba journe touch problem with youtube...

Hello...I have a problem with my journ.e touch...I open opera browser and try to watch YouTube video but I get an error message Unsupported .swf file format. Some animated content may not play....and I cant see YouTube videos...
I try on i.e.i press watch video windows media player opens and then I get another error message that says <<Unable to establish a connection to the server (0xc00d0006)...then I try from the YouTube icon I choose a video to watch but now I get an crass error that says: Unexpected program failure. Please send "crash.txt" to the developers...program will now exit...
Please if anyone can help it would be great...thank you

Recommend checking the JournE Touch FAQ:
http://www.toshibatouch.eu/journe_touch_wince/faqs.php
+Q: I got issues using JOURN.E TOUCH's YouTube application. How can I solve them?+
+A: Unfortunately, YouTube changed its software architecture. JOURN.E TOUCH application uses the old one. We're investigating the problem and, as soon as we can, we supply you an application update that will solve the trouble.+

Problems with Menu Bar after recent security update

Ever since installing yesterday's security update I have been having problems with the menu bar. When clicking on the blue Apple in the upper left hand corner, no drop-down menu appears as it should. This problem also occurs in the drop-down menu named for the program in various instances (Thunderbird, Azureus, iTunes, Finder, Firefox) but not in others (Safari, Adium, VLC). Sometimes the menus are simply truncated and do not include all the options they should rather than not opening at all.
I have run Disk Utlity which found no problems and have performed a hard restart multiple times but the problem persists. Any advice would be very helpful. Thank you.

Thanks for the help. I tried most of the solutions listed in the link you supplied, but am still having the same problem. However, when I tried to run the Tiger Cache Cleaner, I got the following error message:
Runtime Error 4: Failed Assertion
Location: /Volumes/RBUS/Common/MacOs/MacOSMenu.cpp:420
Failure Condition: appMenu
Failure Message:
Please report what caused this error along with the details above.
Thoughts?

Zen Touch problems with WMP

Found a way to get round this apparent problem which i have been experiancing for some weeks now.
No matter what way i loaded or connected the touch WMP0 couldnt recognise the player to allow me to sync my library to the player. It used to work ok, but stopped all of a sudden. Of course Mediasource works grand, but i think people's problems actually getting the touch to be recognised in windows and docked at all stems from this problem.
Anyway, plugging the touch in with mediasource loaded will detect and dock the player ok, but any attempt to load and use WMP0 simply crashes everthing.
The process 'CTPdeSrv.exe' runs when the player is plugged in automatically, but this is what is causing a lock up if you use WMP0.
Simply stop the process in task manager and load WMP0. The touch will be recognised, and be ready to sync.
I can't understand why this process is now causing problems with WMP0 as it used to work ok, but this seems a decent way of getting round this problem until new firmware is released.

I use WMP0 quite alot for my uploading. I tried MediaSource, but to find that my Zen Touch came up with 'Playback Error'! I also have a Zen NX as well. They both work fine with WMP0. If you are having trouble, Start WMP0, plug in the Zen Touch, Goto Sync. If it's not there. Goto 'Now Playing', wait a minute, return to 'Sync' and Refresh the screen (F5). This works for me when switching between Players.

Having problems with menu bar! NEED HELP

I'm having some serious problems with the finder menu bar. When I click on the blue apple, it won't show anything! It just highlights the blue apple without a pull down menu. Same goes for the Window pulldown menu. Also, under finder. when I click empty trash, or do the equivilent keyboard shortcut, it won't empty the trash. I have to ctrl click on the trashcan and empty it that way. Please help me fix my finder, or else I'm going to have to reformat and start ALL over which I really don't want to do. Thanks!
PS This is on a Dual 1.42GHZ G4 Tower w/ Radeon 9800 Pro graphics card and 2GB (4X512mb) ram. I also updated to 10.4.7 from 10.4.6 to see if that fixed the problem, and no dice! Thanks!

Well if the problem occurs in two accounts then it is systemic. When did the problem begin? Was it with a software update, sch as from 10.4.6 to .7? If so, try reapply the update using the Combo updater.
IF that doesn't work you can re-install 10.4 using the Archive and Install method, which does not wipe your disk, does not require reinstalling all your applications etc, However, BACK UP YOUR DATA FIRST, and read up on the A&I before you do it.
Hope this helps
Regards
TD

OS X Lion Server display problem with menu highlighting and button icons

I have attached Grab capture of my screen showing the problems with the window top bars and button icons. This happened after a routine security update.
Does anyone have an idea how to fix this?
Thanks
George Harrison

I have/had the same problem. Comparible setup running Lion Server GM. The natd service fires off the InternetSharing service from the prefspane instead of the regular natd service. This is verifiable by entries in the system log as well as the lack of the natd process running. Below are my findings from research/experimentation; please understand that this is what I have done to get it working, it is DEFINITELY not best practices and I'm sure not supported by Apple. I'm just conveying what I think is happening and how I dealt with it.
Natd - Executing the binary referenced in the launchctl job directly launches the InternetSharing service on Lion server. This does NOT act this way in SL server, where it works as expected. Replacing the Lion binaries with The SL ones results in natd working as expected: nat_start and nat_stop in /usr/libexec. In short, if you replace the Lion binaries with the ones from SL, it-s a drop-in fix. Natd isn't your only problem though...
Dns/named - It appears that Apple has limited named to binding on the loopback adapter only by default on Lion. Adding a listen-on clause to named.conf with the appropriate bindings will fix this. I'm assuming you're running natd, named and dhcpd on the same box...
Dhcpd - Works fine. It appears broken only because the InternetSharing service is replacing natd (why?!?) and it has a built-in dhcpd server (dumbed down 192.168.2.0 subnet). Once you fix natd, this runs as expected.
Firewall/ipfw - Gotta have this running so that natd will do translation. Remember to open the dhcp ports to allow the clients to get leases...
I hope this helps, I'm sticking with SL until these issues are worked out...

Problem with menu buttons

Hi there,
I have been using encore cs5 for a while now but have suddenly come across unusual activity when authoring DVD...
I render mpg2 and bring it into Encore. I then make chapters on timeline and link to 5 buttons as required.
When I preview it all looks fine and I have no problems. However, when I build project and burn, it plays first 3 buttons fine but for some reason the last two buttons do not link to correct chapter?
I have checked links many times and as far as I can see they are all fine? Any idea's please?
Thanks

Hi Jeff,
Thanks for coming back to me.
OK, I think I have solved the problem....
I am using Dual Layer discs 2h-10mins and I notice that the auto (switch layer) in Encore was in use. As a last attempt I decided to use manual switch layer and it now burns and works fine !!
I can only assume that Encore puts a hidden chapter mark at a point within the timeline and this therefore causes problems with my own chapters?
Once I used manual switch layer mode it was fine.
However, if I bring into Encore footgae that has not been transcoded then there is never a problem, apart from poorer quality ? The above problem only happened when I brought in Mpeg2 transcoded footage!!
Up to now I have been importing HDV footage and letting Encore transcode it (auto mode) for me but I must admit it does not do a great job regarding quality and seems to use more space?
If I first transcode in Premiere HDV to Mpeg2 then it looks much better and takes up less space !! I just have to remember from now on to manual set layer switch mode!
Thanks
Again

Iod Touch Problem with January Update - Won't load!! Tried Everything/

Dear all, Just thought I'd try my luck here for some help on the January upgrade. I'm experiencing all of the problems that everyone else are having but the usual fixes don't work. So I've upgraded my Touch to 1.1.3 and Itunes to 7.6.
The Download button wasnt visible so I reset my Touch. I was then able to purchase the touch and it downloaded. Then nothing. I had oricinally Synced with a different computer and had manual Syncronisation enabled. So, I reset my Touch again, set it to auto Sync and rebooted, re-synced, everything. Hours of trying different variations of restoring, syncing, etc. When I put my Ipod back in the cradle, I go to the purchase upgrade screen. If I hit "No Thanks, I get an error. If I try to purchase again, I get the message that it's already purchased. I've checked my download history and the upgrade is listed there.
I'm a windows/Intel guy and was starting to realise how cool Apple stuff was but well, now I think I'm starting to come back around.
Any suggestions ? Thanks to all and good luck!

Hi EC, thanks for the suggestion. Unfortunately, that doesn't work either. I've tried on two diferent computers too. Itunes 7.6 install, reset Touch, reinstall software, sync and no luck. I've double checked that my computer is authorised an that the January upgrade is in my purchase history. Even reset my touch via iTunes and via the Settings panel on the Ipod.
The only thing left that I can think of is to create a new account and re-purchase the upgrade. However, Im still not totally at ease with paying for an upgrade 2 weeks after the purchase, and Im not ready to pay for it twice.
Apple are you guys really this bad at running a business ? I will certainly with-hold purchasing any new product of yours in the future.
Cheers
RS

Ipod Touch Problem with Internet at home, Wi-Fi & Vista

I just bought an I Pod Touch 32G 2nd Generation. I work on a Vista PC. I synced my Ipod and everything seemed to work. When I first tried to connect to the internet at home I did make a connection, but still couldn't use mail or safari or anything.
I share my wireless internet with my neighbour. He works on a Mac. When comparing my Ipod to his, he found out that I did have the right password, but the IP address was totally different to our router. He synched my Ipod with his Mac en then it worked just fine.
But since I cannot make my Itunes library on my neighbours Mac, I had to sync my Ipod to my computer again. Then I was not able to connect to the internet anymore. It does seem to recognize the password, but it says it can't connect (but not why).
We have WEP, and I have the latest Software installed (since I have it only 2 days). What can I do to connect to the internet? (apart from buying a Mac that is)

normaly wifi routers are setup to being hdcp servers which mean that
the ipod and computers really
gets the ip when they connect to the router over wifi
along with their dns gateway and proxy settings
if your router is very different setup and your ipod somehow get
it's ip from the last computer it synced with
maybe thats the thing to look into
because if your vista box give it some garbage ip outside the normal subnet
of routers network and the router dont have dhcp turned on to give it a valid
ip that could cause all your problems
maybe the mac have it's internet sharing turned on and thats why after being connected with it the ip it got is not a crazy one

Problem with menu

I recently bouth a N72 phone. I touch out the card and when I put it bag in, my menu runed wiled. I have just 3 folder where there are put oll my menu icons and applications. My muzisc doues not work any more. I tried to restore de original settings, but nothing.
Need help fast!

Hi,
How would you connect your db via program something like
1.createConnection()
2.closeDBResource()
if so, close all the db connection properly. or else.?
if your following default way, it won't happen Application Module will taken care of.
if you have inactive connection try to kill out. that is set ideal time out. it will present web logic server.
Thanks

Iphone 5 touch problem with cold?

Hey guys I have an iPhone 5 which works perfectly but in a sudden, now in winter the touch screen began to stop working well, I warm it and my hands and sometimes it works sometimes it doesn't.
What could it be?

Hi Domingo Francisco Gomez,
We've an article that details a number of steps which can help restore normal functionality to your iPhone's touchscreen.
If you have a case or screen protector on your device, try removing it.
Clean the screen with a soft, slightly damp, lint-free cloth.
Unplug your device.
Restart your device. If you can't restart, reset your device.
If your touchscreen still doesn't respond like it should, contact Apple Support or take your device to anApple Retail Store or Apple Authorized Service Provider.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch
http://support.apple.com/en-us/HT201406
All my best,
Allen

Zen Touch - Problems with touch

I have troubles with my touch pad. When I scroll, the marker keep scrolling after I let go of the touch pad. My Zen Touch is only day old!
Anyone?

When you hold the bottom or top of the touchpad it will automatically skip to the bottom of your playlist. Try not to hold you finger there and just run it through the pad. Don't linger in those places to long or it will skip.

X3 touch - Problem with menu

Similar Messages

Maybe you are looking for