X3 very low message and alarm tone

plz help me my nokia X3 message tones and alarm tones r very soft and i cant hear them even if its in max volum.....plz help

this has been brought up here many times if you search site you will see this
however the only solution is that you use a louder mp3 tone for these alarms
the preset tones are not that loud
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Laser Jet 100 Color MFP M175nw "Very low" message even after changing cartridge

    Hello, Windows 7, 64 bit. Connection: USB. After a "supply very low" message for the black cartridge, I changed it to a completely new one (HP original toner with the hologram), but I still got a "very low" message and the print quality remained faint. Nothing worked: I tried the 3 solutions posted by Shirlzz1 to another user that had exactly the same problem (Alan_Gilmore), i.e. 1) taking out and reseating cartridges, 2) hard reset, and 3) taking cartridges out and hard reset, then reseating cartridges. I also tried a cleaning and a print quality report. All looked fine, but still "very low" message and faint print quality. The only thing that worked was changing the cartridge a second time to a completely different (new) one -- now everything's fine. So I'm guessing the first replacement cartridge I used is defective. However, is there anything else I can try with the apparently defective cartridge? They do cost a pretty penny, especially here in Denmark. Thanks for taking the time to look at this.

    Hi,
    Please check for these settings
    setup menu> system setup>supply settings
    Under this you have a option
    Black Cartridge
    very low settings>stop/Prompt/Continue, select continue
    low threshold> on/off
    same for color too
    Hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

    Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
    On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
    (I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

    Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

  • ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)?

    ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)

    Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore

  • Please wait very low battery and apple logo comes up after some time make some noice

    My ipod classic 30 GB shows "please wait very low battery" and apple logo comes up after some time make some noice

    Try the Hrad reset, especially must  charge the battery for at least 2 hours.
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/

  • N8 hold button and alarm tone

    After purchasing the N8 (and being generally very happy with it) I have had at least 10 incidences where I have been talking to a client, and as I hold the phone relatively close to my cheek, this has activated the "Hold"-button on the screen, muting the conversation. This button should be smaller and be placed further down on the screen, or there should be an option to delete it completely - I never use this function, and I am sure many others don't use it. The second issue is the clock alarm - this will only make the phone vibrate, there is no sound in any setting (general, silent, meeting etc.) Is there a fix for this?

    icepilot wrote:
    (...) The second issue is the clock alarm - this will only make the phone vibrate, there is no sound in any setting (general, silent, meeting etc.) Is there a fix for this?
    That's strange...Mine always vibrated and had sound in alarms. The phone even has the option to chose which sound you want to use as alarm
    Go to settings->Phone->Time and date->Clock alarm tone
    And mine used to function in General and silent profiles (never used the other ones)
    Hope this helps
    If you found this post helpful, please click the green button. Thanks!

  • My ipod got very low battery and now won't connect with itunes?

    My ipod got an extremely low battery and now it won't connect to itunes or charge when connected with the usb. I had not trouble connecting before this

    Let it charge for awhile. 
    Does the iPod show that it is charging?
    After charging for at least an hour try resetting the iPod.  Also see:
    iPod touch: Hardware troubleshooting

  • Audio is VERY low with and without headphones even after being turned up! :(

    Ok, so I have a Satellie A105-S361 Toshiba laptop with Windows XP that recently got repaired and it works splendidly, but the other night I discovered that when I tried to listen to audio, the sound was so low that it was difficult to hear. So I turned up the volume in the Volume Control window and tried again, no change. So then I tried plugging in my headphones to see if I could hear anything, still no change. So you can hardly hear the sound through the speakers or any headphones. Turning up the volume doesn't help, and its really starting to get a little frustrating.
    Solved!
    Go to Solution.

    First, check the pesky manual volume dial, it's on the front of the computer, on the very right, kind of tucked under so it's a bit difficult to see.
    Then check the "Sounds and Audio Devices" control panel.
    There's the "Device Volume" slider, and also look under the "Speaker Volume..." button for another volume slider.
    Also, click on"Advanced..." and there should be a mixer that pops up, and you can adjust more items there.

  • Slides have very low fps and laggy input for first few slides.

    We are creating a project in captivate that is 50 slides long. The first 4 or so slides are very laggy and are very slow to respond. They have flash animations and they do not play at the full 24fps. After awhile (usually by the 6th or 7th slide, the lag stops and the animations start playing at 24fps, although they often pause in the middle of the animation).The first few slides do not lag if you manually jump to the first slide once the project has got up to full speed. 
    We are using flash animations, custom widgets that are modified versions of the "Flash Button" widget that comes with captivate, and text to speech audio on almost every slide. We are running the project locally, from the hard drive. The problem seems to happen only when there are button widgets (custom or the default Button.swf) on any slide. It goes away once they widgets are removed. The problem seems to still exist, but load faster when there are less slides in the project. I'm wondering if it has something to do with loading the button widgets, as it eventually goes away, like they are done being cached or something.

    Hi
    Can you tell me which version of CAPTIVATE and OS you are using? and provide me the screenshots of SWF SIZE AND QUALITY under PROJECTS in PREFERENCES

  • Very Low Performance And Stability gaps

    Hello, first of all, sorry me because of my low level english.
    I have recent bought new pieces for my sistem, my older CPU was a Duron 1300 (overclocked 1400) in a Gigabyte Ga-7zxr mobo with 512 SDRAM 133 mem.
    I choosed a MSI mobo, the KT6 delta (sr), a 2600 XP+ and 512 DDR 333, with no knowed fabricant.
    I get a lower performance in my new system than the older, isn't normal.
    I have so much questions, please reply me so much you can, i'm getting crazy
    I've read in other posts some specifications about Amp' consume in the mobo.
    Where can i see it? Say me and i'll post it.
    My 2600 xp+ is the model 8 (not the actual 10), it have 256 Kb cache instead 512 and run over 200 mhz over the model 10.  167 x 12.5.
    (wrong forum?, could be, dont reply me to it if you think i should no make this question)
    Well, go with mobo problems.
    My monitor refresh (like if I change the resolution) so often, I don't know why.
    In the dxdiag, in the 3D test, i get a cube no well showing, i only see a bad image, like if the cube is turning hyper velocity.
    In all sandra test i have a performance according with my system, but when i get to ride games, i get low performance than in my older system
    My mem isn't kingston and isn't of any knowed mark. I only could to get kingstom memory instead, i would do it? is really so recomended?
    Well, my best crazy head is about configuring the bios.  I don't know what to put in this values:
    System Bios Cacheable: Enabled.
    C000, 32k Shadow: Enabled.
    SDRAM frequency Auto
    SDRAM CAS# latency
    Row precharge Time
    Ras Pulse Width
    Ras To CAS delay
    Write recovery cycle
    Sdram Burst Length: 4qw
    SDRAM 1T Command: Enabled
    Fast Command Turbo
    FAST R"R turnaround Enabled
    about AGP:
    AGP Master 1 WS Write
    AGP Master 1 WS Read
    AGP READ Synchronization
    PCI LAtency  Timer 32
    Frecuency..
    Spread Spectrum = 0.5%
    CPU FSB 166
    CPU RATIO Auto
    CPU CORE Auto
    Vlink Voltage Auto
    DDr Voltage Auto
    AGP Voltage Auto
    Too much question, really, i know.
    I'm thinking to install a CPU Cooler in the mobo chipset and in the RADEON chipset also, must i do it?
    All my CPU details are below.
    Thanks for all.!!!!

    The model 8 Of AMD AThlon XP is a 333 FPU. I've read it in AMD and other pages.
    i've reduced the case temp by putting another coller in this, but it makes really noise. The new Case temp is 48º C. I'm thinking about to buy another case, with some coolers.
    May i have to change the mem to a kingstom mem?
    Much thks.

  • My iPhone 4S keeps changing/ resetting the brightness to a very low level and I have turned off the Auto brightness button and restarted for weeks.

    My iPhone 4S keeping changing the brightness on its own and I have already turned off the auto brightness etc and restarted multiple times for several weeks.  I can't see the screen to answer calls etc . Really annoying

    Is the battery drained after it shuts itself off?
    Did you already try to set it up as new device?
    How to back up your data and set up as a new device

  • MSI HD 7950 very low fps and scores

    Hi I just bought a new pc and theres something wrong with my msi hd 7950, I've tried crysis 3 in every settings available and it's extremely slow, also tried 3dmark and got a score of 3000 +/- and fps of 10 and 20... Already tried msi drivers and amd drivers, and it's the same...Everything is new can anyone help me?
    my specs are
    ASROCK z87 Extreme6
    Intel i7-4770k
    2.0 Tb SATA 3 WD 7200 64Mb
    DDR4 8G - 1600 MHZ Corsair
    MSI AMD HD 7950 3GB
    Thanks in advance

    Try removing current driver in safemode using >>Driver Fusion<<. After reboot install latest AMD one. If still no help use >>MSI Afterburner<< to check with OSD monitoring if it runs at expected clockrates and temps under load.
    Also please list psu details.

  • Trouble starting ipod (very low battery message) and loop

    Hello. I am having troble to start my ipod classic 5 generation. The message "please wait very low battery" (with an ipod with sad face) appears but the weird thing is that i just used it yesterday and i left it fully charged...but well. Then i try to charge the battery with a wall charger but it starts on a loop passing from the black screen with the apple logo, then it goes to the message "go to itunes/ipod/support" web site. and then it says again "please wait very low battery" just for a second and then it goes back to the black screen with apple logo and does this again and again. Then i tried to connect my ipod to the computer, after i do this it shows the message "please wait very low battery" and stays like this forever. I have tried ALL the suggestions, from trying to restart the ipod by clicking the middle button and the menu button at the same time (several times) and then clicking the middle button and the play button so it gows to the disk ode and nothing. I tryed witting it on the right corner and nothing. I already tested 3 usb different cables and nothing. It is not my usb port (i made tests with an ipod touch i have and works fine). Daaaaaaaaaarn!!! I really dont know waht to do now.
    Any advises please!!!!?
    Thanks a lot!
    Rick

    Have you seen these articles?
    iPod displays a folder icon with an exclamation point
    iPod displays a sad iPod icon
    Also, here's s very good post about the sad iPod icon and/or exclamation point and folder:
    Mitch: Exclamation point and folder and nothing else!
    -Kylene

  • I dropped my ipod now it says "very low battery"!!

    I dropped my old ipod from 2006 and now it says "very low battery" and "www.apple./support/ipod !!!
    and also a picture of an weird looking iPod with X as eyes and sometimes sounds come out of the ipod.
    Please I´m in desperate need of help!
    Message was edited by: niinaa

    Firstly, i believe it is the time to have the battery replacement, see if the following helps
    http://discussions.apple.com/thread.jspa?threadID=1591975&tstart=0

Maybe you are looking for