X300 shuts down when switching into the presentation mode
Hi,
I wanted to switch my Laptop to the presentation mode so that only the external monitor is enabled and the monitor of the laptop is off. After putting FN+F7 and choosing one option from the menu my laptop totally shuted down which means blue screen and restart. Has anybody an idea why this happened ?
Best regards
Mathias
Use the PC Doctor 5 and run a check on the Ram modules.......
Also, i would try to uninstall Presentation director and reinstall it..........
what version of the presentation director are you using???
Also what is the OS you are using Vista or XP????
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Similar Messages
-
problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.
I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
MacBook Pro shuts down when i close the lid
Hey,
My MacBook Pro shuts down when i close the lid.
It started to do this one or two times, but now it is every time.
I have the latest battery update, so this should not be the issue here..
Any sugestions??
I have started to suspect the it might be some faulty conecctions or somthing..If it's unable to go into the proper sleep state for some reason then it will do that.
Run /Utilities/Console and click 'All Messages' top left then close the lid, wait a minute then open it again - if it's shut down then reboot and open Console again and check the latest log lines looking for 'sleepimage' - it should give you an indication of what happened/didn't. If you're not sure what it all means post _just those lines_ here. -
Pre Turns Off or Shuts Down when I close the keyboard
Is my pre screwed or is it OS?
It shuts off, not the version that other people have had where you have to pop the battery (the power button still works to turn it back on) out to get it to restart. Anyway, it shuts off when I slide it closed. I thought maybe something loose so I did it very slowly, not allowing it to even go all the way, the minute that the sensor tripped it back into "no keyboard" mode it turns off.
It's especially bad when on bluetooth...happens every single time.
Is there a solution for this. Please palm, a lot of people are having this problem and there is no answer yet?
Post relates to: Pre p100eww (Sprint)Palm is on deathwatch. The Pre could have really kept them afloat, but there are too many problems with it. When I first got my Pre in June, it was awesome! Everything worked great. But now, I am always having problems with it. Here is the list:
1. Pre turns off or shuts down when I close the keyboard. (I had to make this one the first on the list since it is the topic.)
2. Pre turn off or shuts down for no apparent reason and the only solution is to remove the battery, wait a second, put the battery back in, then turn it back on. This takes forever. Plus, because I have removed the back so often, my Pre squeaks when I am typing (from the plastic). It is very annoying.
3. The navigation system has a glitch where most of the time, it cannot find my current location. The message says to make sure I am in clear view of the sky, but i always am. There are many posts about this problem in other sections. There are some solutions, and the often work, but it takes 5 minutes to reset the system. It is a beating.
4. The navigation system voice is usually very clear, but sometimes, the voice will skip over the names of streets as she is calling out the directions. Ex. "Turn right on ________ Drive."
5. Sometimes the keyboard will stop working. I have to remove/replace the battery. Again, this is time-consuming and further contributes to the squeaking problem when typing because you have removed the back so many times.
I like Sprint because I can get unlimited data, txt, and mobile-to-mobile calling for $70/mo. So, I hope that someone comes out with a great touch-screen phone (not the BB Storm), because I want to stick with Sprint. If you go with an iphone, you have to get AT&T, which will cost you at least $100 for the same. That is a $360/yr difference! I am sticking with Sprint. -
Will only shut down manually? What do I need to do to get it back to where it will shut down when I click the shutdown function?
Boot holding down the command-r keys into the Lion Recovery Disk. Select Disk Utility and run Repair Disk.
-
Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs -
How do I log in after a shut down when I forgot the password
How do I log in after a shut down when I forgot the password
Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode -
Can anyone answer why photoshop CS3 shuts down when I use the scanner?
Can anyone help me with why photoshop CS3 shuts down when I use the scanner? I recently upgraded to OS X Yosemite.
Ask in the PS forum and be much more specific. You have not provided exact system information, crash logs, scanner details. That said, this may be a compatibility issue that can't be overcome.
Mylenium -
My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?
A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing -
My phone froze and will not shut down when I updated the iphone
my phone froze and will not shut down when I updated the iphone with the new software
<Re-Titled By Host>Hi there bebe_meza,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
-Griff W. -
Music shuts down when switching apps
Why does my music shut down when I switch apps like weather or mail? Can't I still listen to it?
What OS and App version are you using?
What messages are present in the Console when that happens? -
My Satellite laptop (A305) shuts down when run on the AC charger/adapter
The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
One interesting thing is that the _computer runs fine on AC when in safe mode_.
I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?I have Satellite A300 and until now everything works OK.
I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
If not let OS run and put the battery.
Is the battery recognized properly? Does notebook switch off again?
To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
Full diagnosis?
And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help. -
Aperture shuts down when switching program
Hello,
For no obvious reason Aperture shuts down whenever I switch to another program such as Safari. What can I do?
Thanks, MattWhat OS and App version are you using?
What messages are present in the Console when that happens? -
PC shuts down when I plug the iPod USB cable in :(
Hi,
I have just bought an iPod Nano 8GB. Downloaded the latest version of iTunes and installed. Then as soon as plugged the USB cable into the PC it shut down instantly. I had to wait a good 5 minutes when before it would boot back up again. I have tried the front and rear USB port... but to no avail
I running Windows Vista and my PC spec is as follows:
AMD Athlon X2 4600 Dual Core
2GB Corsiar RAM
256MB GeForce 7600GS
320GB SATA II HDD
MSI K8N Neo2 Platinum with Nvidia nForce 3 Ultra Chipset (motherboard)
The USB ports are all 2.0 compatible.
My PSU is 400W.
I have 3 USB devices plugged in the rear and nothing in the front. Devices connected are:
Keyboard
Printer
Scanner
I am sort of guessing the iPod USB cable is causing a surge of some sort, but I might be wrong.
Does anyone have any ideas as to what the problem might be... and to fix it please?
Many thanks,
Gazza.Have you tried to use a different USB port on the PC?
Does the same thing happen when you plug in a different USB device?
Try a restart of the PRE and try again. Go to device info, reset options and select restart. Try again and see if you get the same error.
When you get the Blue Screen Of Death in Windows, it ususally means that Windows has a problem and needs to be reinstalled.
You could try to re-insall the usb drivers for your PC and see if that may resolve the BSOD error. You may need to contact the PC manufacturer for assistance in re-installing the USB drivers.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/pre/p100eww/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. -
Macbook Pro Shuts down when running off the battery...
Im have the late Macbook Pro 15" and I have had it for a year now. When im running my macbook off the battery it shuts down... I have no clue why. It started doing this about 4 or 5 days ago. I have my battery info here.
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-3916-d74e
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 2828
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 2914
Health Information:
Cycle count: 65
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): -544
Voltage (mV): 12137
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No
I noticed that the Full Charge Capacity is not that high compared to other macbooks. Could this be the reason why its shutting its self off? Also i copied this info while i was plugged into the AC adaptor. It also says that its fully charged but the percentage on my macbook reads 97%...
I also installed 4GB ram in it 4 months ago and never had this problem. Could having the new ram in it be draining the battery?
If someone could help me with this extremely annoying problem it would really be appreciated. Thank you for your time.I am having the same problem. I just recently noticed that my battery life was less than an hour. In the beginning, I was able to watch 3-4 complete movies while on a flight. Now, it shuts down if on batteries within 10 minutes while the Bar shows 59 minutes.
Here is my System Profiler
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-3887-4d
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 1809
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 2074
Health Information:
Cycle count: 57
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): 121
Voltage (mV): 12275
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes
As you can see, I have only 57 cycles on this battery. I cannot do anything on battery power only anymore. I spent all morning draining the battery to 0 (all lights on battery off) When the battery is charged and when on battery power, the computer will shut off. The battery charge indicator LEDs on the battery itself has 4 of 5 solid and 5th one blinking. The computer will not power on for about 5 minutes when on battery power only. I bought this MBP about 15 months ago. Any help would be appreciated
Maybe you are looking for
-
Hi Guys, I have created a sample Data Template and registered it with apps and then created a concurrent program and have run that it produces the XML output correctly .. (good upto here) Then i created a RTF template and attached the Data Definition
-
Hello All, Could you please help how to use the Exchange rates in CRM On Demand. My intention is there is a Revenue field in opportunity (in INR) and i am adding another field ref to revenue, i want the revenue currency value should be in USD with th
-
The concept of associating teststand objects to unit requirements for traceability purposes was added to TS 3.5, and I need to find out how to access the array of strings used to store unit requirements in step objects, sequence objects and sequencef
-
How to test movie using flashplayer11.1 in Flash CS 5.5
sorry about my terrible English I downloaded the flashplayer 11.1 (playerglobal.swc,flashplayerDebugger.exe and etc ),and created a molehill project seccessfully. when I used Ctrl+Shift+Enter to debug my swf,everything is ok,Flash CS 5.5 opened flas
-
What is the total number of quizzes you have have in any one module in CP6
As per the heading, is the a limit? Cheers, Rossco