X3000 wireless mouse not working with lenovo T440 - windows 7

New mouse of HP x3000 model is not connects with lenovo T440 model which has windows 7 Enterprice edition. What could be the problem. I followed recommented steps.

Hello @Ilakkuvan,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your wireless mouse will not work on your Lenovo computer. I would be happy to assist you in this matter!
Does the wireless mouse work when connected to another computer? Do other USB devices work on your computer? In the meantime, I recommend following the steps in this document on Troubleshooting USB Connections (Windows 7). This should help connect your mouse to the computer.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Intel 6205 wireless not working with Lenovo W520

Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
1) Machine Brand and Model (PC/Laptop):
Lenovo W520
Intel Centrino Advanced-N 6205
Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
2) Wireless Brand, Model and Wireless Chipset:
$ lspci -nn
03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
3 ) check interface:
ifconfig does not show wireless
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
4 ) Check for modules:
$ lsmod
iwlagn 215351 0
iwlcore 139688 1 iwlagn
mac80211 269644 2 iwlagn,iwlcore
cfg80211 167809 3 iwlagn,iwlcore,mac80211
5) Kernel boot messages
$ dmesg
[ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
[ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
[ 13.499187] lp: driver loaded but no devices found
[ 13.502642] alloc irq_desc for 22 on node -1
[ 13.502645] alloc kstat_irqs on node -1
6 ) Network configuration
$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: 6000 Series Gen2
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 34
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:d5300000-d5301fff
7 ) Scan for networks:
not relevant as no wireless interface appears
8 ) Ubuntu Version:
Ubuntu 10.10
9 ) Kernel/architecture (including 32 vs. 64 bit):
2.6.35-28-generic x86_64
10 ) Restarting the network:
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
[ OK ]
Additionally, modinfo shows the following:
$ modinfo iwlagn
filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
alias: iwl4965
license: GPL
author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi Link AGN driver for Linux
firmware: iwlwifi-4965-2.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-2.ucode
firmware: iwlwifi-6000g2b-4.ucode
firmware: iwlwifi-6000g2a-4.ucode
firmware: iwlwifi-6050-4.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-1000-3.ucode
srcversion: 8F7F4C6196599FCA596C837

Hi sparhk, and welcome.
One of the Lenovo staff who frequents the forum put out a call to help you in a private forum. I do a little Linux, so I poked into it. To my amazement my first Google hit was your thread where you indicate you have solved the problem. (At least, it _looks_ like you...)
May I respectfully suggest that a post back here indicating success would be a nice touch? That way anyone who passes by looking for help with this issue will have a better chance of finding it. For posterity, here it is (see post number 25):
[SOLVED] Intel 6205 wireless not working with Lenovo W520
Glad you got it working,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Hey do you know if the wireless mouse pad works with the ipad 2?

hey do you know if the wireless mouse pad works with the ipad 2?

There is no mouse or cursor used with iOS devices.

Uploading files to website not working with Safari in Windows 7

Safari version: 5.1.7
OS: Windows 7
Hi,
I am a website owner, and I have a feature on my site where users can upload large (up to 50MB) music files to my server. The feature works in Firefox on OSX & Windows platforms and it also works in Safari on OSX. The uploading feature is not working with Safari for Windows. Do you have any idea why and how to fix this? It can't be an issue with my server as it works in other browsers fine and works fine in Safari for OS X.
If you have any information on how to solve this or things for me to try to rectify this for use with Windows operating system it would be much appreciated.
Thanks.

GREAT NEWS!!!!
I have solved this issue myself with some help from my a user on Microsoft Forums. The issue stems from the mime type of each Browser Chrome, IE, & Safari for Windows defaults as audio/wav. When the mime type is changed to audio/x-wav everything works. Firefox defaults to audio/x-wav and when changed to audio/wav it DOES NOT work.
Once I input some code in my .php upload page to change the mimetype if audio/wav is detected everything works GREAT!!!
So Here is what you need to do: Find your upload page and input this code:
echo "<p>MIME Type: ".$_FILES["file"]["type"]."</p>";
right before your "If/then" statement of file type. For me it was near line 30 in my upload.php page, but I'm sure this is different for everyone.
This will detect and DISPLAY the default mime type of your browser on the error page when your upload doesn't work. Once you know what mime type works for your file type then you can change your "if/then" statement for mime type upload to change your mime type to the correct one.
I don't want to give the code here, because I'm sure it's specific to your file types and your site construction, but this should lead you on the right track.
***This is the solution if you ARE NOT ABLE to upload any certain file in a certain Browser. It has to do with mime type construction***
I hope this helps others like it helped me!!!!!

Magic Mouse Not Working with Boot Camp.

Hi All,
I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
John.

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

Wireless keyboard not working with Boot Camp

I have a brand new 15" Macbook Pro. I need to run Windows for work so I installed Boot Camp and Windows 8.1. I have a HP wireless keyboard with a USB dongle. It will not work at all. Windows recognizes that I've plugged in the dongle but the keyboard won't work at all. It's a brand-new keyboard and the batteries show full charge. All drivers look good in device manager. When I went thru the Windows troubleshooter, which is typically worthless, it said something about the dongle being USB 2.0 and the Mac's USB is 3.0. But shouldn't it be backward compatible? It has no problem with my old wireless mouse with a USB dongle.
I also notice a significant difference in the clarity on my dual external monitors with Windows instead of OSx. The colors aren't as sharp and the text isn't as clear - kind of fuzzy. Is that just how it goes with boot camp, or is there anything I can do, like maybe an upgraded driver, to get the same clarity on my dual monitors with Windows like I get with OSx?
Any help is appreciated.

Unfortunately I can't turn off Bluetooth in Win 8.1. I go to the page where i should see the slider and the page just spins and spins. I thought my install might be hosed so I blew it away and did a fresh boot camp install. Still no joy; BT still spins - and I still can't connect to the USB keyboard. I can plug the dongle in and see it in devices, and it says it's ready to go but the keyboard doesn't work. It's brand-new and has worked on a Windows box so I know it's not a bad keyboard. Maybe time to go back to a Windows box and ditch boot camp?

Mouse not working with Boot Camp after 10.5.7 update

I upgraded to 10.5.7 recently, and now my mouse doesn't work on Boot Camp. It doesn't seem to register, and I can't move the pointer. I tried this with two mice that worked just fine on the Mac OSX side. Any ideas? Has anybody else noticed this?

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

USB Mouse not work with Mac OS 10.6

I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.

Ask the Vendor.

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Will a wireless Mouse/Presenter work with SWF/CP output?

I see on the market lots of wireless presenters. Some boast
multi-functionality, where they become effectively a wireless
mouse. Will these work within a SWF, so that you can navigate a
tutorial that is nothing more than a glorified PPT show?
It's not a PPT show cuz it's a little more involved than what
PPT does effectively, but the keyboard is not required to navigate
this thing.
I'm assuming that if a presenter boasts 'internet browsing'
capability, then your SWF should be able to be navigated fine.
Is this a correct assumption?

I would probably assume that.
I would reccomend a presenter with a "joystick" type control.
The trackball type are a pain, and usually get gummed up like the
old ps2 mice.
When I was in the navy, we had something similar to this for
ward room briefs:
http://www.superwarehouse.com/RemotePoint_Presenter_Wireless_Pointer/VP4300/p/287346

HP wireless mouse not working (sometimes)

I have an HP wireless mouse, product number LB454AA, model no. MORFFIUO, s/n CNP25106C3.
well, i bought it about almost 2 years ago, but, even since I bought it, he had problems, and continues to have them...
the problem is, that sometimes, the mouse just doesn't work. I slide the power button and the red light just flashes, and its not like flashing 5 - 5 seconds, just flashes once.
I dont know what is heppening, not even with new batteries work...
and besids, if I click connect + the power button, the red light works, but the mouse doesn't do anything...
another thing is, that majority of the times, I put a new batterie, I wait like 30 minutes or 1 hour and the mouse returns to work again.
yesterday I put a new batterie on it, today i put another because the mouse was not working anymore.
does anyone know why is this heppening?
i cant even speak to support, the website dont recognize my mouse through product number.
i did not bought my mouse in this website, but is for you to see wich mouse is:
http://www.amazon.co.uk/HP-Wireless-Mobile-Mouse-Black/dp/B004OXU4TG

Hello TwistedJ,
It would appear by your description that the mouse is faulty. If this behaviour started since the mouse was new 2 years ago, you should have returned it to the store you purchased it for a replacement or contacted HP Support directly for warranty help.
HP warranties its wireless mice for up to one year.
There is really nothing you can do at this point.
I'm sorry.
I do not work for HP.

Fingerprint reader on Lenovo KUF0452 keyboard not working with Lenovo X1

Hi, I have a Lenovo KUF0452 keyboard with built-in fingerprint reader. Up until two weeks ago I had a two year old X1 Carbon laptop which co-existed happily with the keyboard - I could unlock Windows with a swipe of the keyboard's fingerprint reader. I've now replaced the old X1 with a brand new X1 Carbon and can no longer unlock Windows using the keyboard's fingerprint reader - I just get this error on the Windows 8.1 lock screen: "A match for the fingerprint was not found in the fingerprint database." I have the latest Lenovo Fingerprint Manager Pro installed and have used it to enroll a couple of fingerprints for the X1's fingerprint scanner, but when I try to use it to enroll fingerprints for the keyboard's scanner the app's progress bar doesn't move off 0%, so I assume the app isn't accepting the keyboard's fingerprint scanner as a valid input. The X1 is docked, with the lid shut, so I have no easy access to the laptop's fingerprint scanner which is why I want to use the keyboard's fingerprint scanner to unlock Windows. How can I get the keyboard's fingerprint scanner to work with my X1? Kind regards,

hi Avikiru,
Welcome to Lenovo Community Forums!
Can you try,
Remove the AC and the Battery
Hold the Power Button down for at least 15 sec.
Reconnect just the AC and see if that'll work
If not You can contact a Lenovo Support Team or a Local Technician to have the Keyboard connection checked.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

Why does magic mouse not work with duracel batteries

I bought an iMac a few months ago.
Now the batteries from the magic mouse are empty and I had to buy new ones.
Only they don't work. I had to pick cheap batteries from others devices.
Can anyone tell me which brand wil work?
Thanks,
Bernadette

I bought my iMac 2 years ago, it came with a Magic Mouse, within several months I started having the same battery issues. I looked here, and on the Internet to find out if the problem was already known about, but found only people guessing wrongly at what the problem is. I do hope Apple has fixed this, but unfortunately many of got stuck with a junk Magic Mouse. As an Engineer with 25+ years of experience in the design of electrical contacts & connectors which includes over 2 dozen patents ... believe me when I say the problem here is that the recessed positive contacts (at the on/off switch end) are too deeply recessed to make contact with the industry allowed variation in AA batteries. Those contacts are too deeply recessed because the plastic is too thick (in the hole that forms the recess) and the metal contacts are not tightly up against the backside of that plastic wall, in fact it looks like they are installed with a gap and/or can deform/bend away further opening that gap even larger. As mentioned above many industry AA battery standards define the positive button contact height as being 1.0mm or larger ... however that plastic wall is about 1mm thick, add the gap for the metal contacts and you have no electrical contact no matter how much contact spring force there is at the negative end. Unfortunately, there is no simple good fix for the average person to perform, the recessed contacts can't be accessed to bend them to remove that gap and the pastic is too thick anyway .. leaving us with a "duct tape" fix, like wadding some tin foil into that positive terminal recess and swearing when it falls out during battery changes. A nice elegent fix, would involve disassembling the mouse, machining plastic, backing up those terminals... absurd right?... would be easier if Apple sent us a new mouse that works.
This problem has nothing to do with overall battery length, battery diameter, or inadequate spring contact force from the negative mouse contacts. Also I doubt the brand or type of battery is the issue for anyone, the positive button heights vary among brands/types, but probably are 1.0mm or larger per the industry specs, Apple just didn't design this mouse to that industry spec, or they did not control their manufacturing quality to yield what they designed. This iMac was my FIRST Apple purchase after decades of avoiding and dismissing Apple, ironically they won me over with their progress and high quality products ... I'm rather disappointed.

G505s - Touchpad hot key function not working with lenovo driver

I'm using windows 8.1, Lenovo G505s laptop. Recently I got replacement from Lenovo regarding touchpad after that this Fn(F7) touchpad enable/disable not working. This is happening only when I installied touchpad driver provided by lenovo and works well with standard microsoft driver (Ofcourse, no multigesture support with that driver).
We perfomed following operations:
1. HotKey mode enable/disable in BIOS
2.Reinstallation of OS
3. Reinstallation of driver(manually)
All cases with microsoft driver this function working but with touchpad driver it is not working. It's almost 90days (88thday) daily contacting both Lenovo customer support and service center people but no use.
If anybody having this problem and have a solution please share! (My machine under warranty!)

hi phani_kumar,
It's likely that you have a Synaptics driver (you can verify this by its hardware ID or use a utility software like AIDA 64 Extreme Edition).
- Link to picture (Synaptics)
- Link to picture (ELAN
If you're unable to install the driver below, can you follow this guide on how to disable driver signature enforcement then try to reinstall the driver again and observe if you can now toggle the Fn+F6.
Windows 8/7/XP/Vista 64/32-bit Edition v17.0.19
All Languages
118.1 MB zip
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

X3000 wireless mouse not working with lenovo T440 - windows 7

Similar Messages

Maybe you are looking for