X301 and ericson F3507g card win7 and drivers nighmares

Hi,
I could really use some help getting win7 and the f3507g working.
I upgraded from vista to win7 and now the card is alway on according to the led, but in access con it is off.
Gps is not working ether.
And i have run system update, all is upto date.
Any suggestions ?
Br.
poul

Ok, thanks Bill,
I'm not sure what/if there is a system difference, but nothing related to the F3507g works on my X301 running win7.
The driver is version 1.0.0.52, and the Device Manager states every thing is fine and the devices (I have 3 f507g related devices, 1 network adapter and 2 ports..) also states every thing is fine.
One symptom is the wwan led is 'always on' and i cant turn it off
Any suggestions ?

Similar Messages

X301 and F3507G issues in Australia

Hi I have a F3507G wirleess card in my X301 and my service provider is not supported byt eh mobile card software form Lenovo.
I have tried some of the connection attributes talked about on other posts but these seem to turn the F3507G into a dial up modem and that is not what I need or want.
On the inital install I had options to connect over HSDPA and connected successfully once then the software showed the modem as being not available despite it being OK in the hardware profile.
I have the latest versions of Access Connections, Mobile Broadband Connect and the driver for the F3507G is up to date.
My service provider in Sydney in Telstra.
Three months after installing this card I would love to be able to use it more than once and for more than 15 mins.
Please help.

SteveA wrote:
Hi I have a F3507G wirleess card in my X301 and my service provider is not supported by the mobile card software from Lenovo.
My service provider in Sydney in Telstra.
I have a F3507G in a T400 that is running fine with the Telstra Mobile Broadband Next G business service..... there was a Telstra selection on the pick list offered in Access Connections.
If you are trying to use a F3507G with Telstra BigPond Next G consumer service, you may have a more interesting time, as the BigPond Next G service generally only works readily with a device was supplied by BigPond, as they track the IMEIs of their devices.
Cheers,
Bill
I don't work for Lenovo

How to configue AirCel prepasd SIM Card and drivers for 8.1 64bit

Hi Team Members,
how to configue AirCel prepasd SIM Card and drivers for 8.1 64bit
issuse in my laptop
Sarfaraz
(Personal information removed)

@Sarfaraz71 ,
Thank you for posting and the HP support forum and welcome.
So that I can help you better with your sim card issue. Could you post back with your.
Full Model and Product Number
Second in your post you asked about Windows 8.1 drivers and you state you are running Windows 7.
What Operating System are you running.
Hope to hear back from you soon with the information I have requested.
Have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Windows 7 and drivers question

Like may people I have recently upgraded to Windows 7 64-bit from Vista 32-bit. When installing I used the optional update listed in Windows update?for Sound Blaster drivers, these were installed and the sound is working fine.
After a few days getting Windows 7 set up the way I wanted I decided to?find and install the extra?programs from Creative like Alchemy and the sound utilities. The problem is Creatives auto update is broken as posted on these forums?by a lot of other Sound Blaster users. My sound card was installed when I bought the card so I don't have the serial number or model number and I'm unwilling to take the machine apart to find these numbers.
My problem is that I'm sure my card is the PCI-Express Sound Blaster?X-Fi Xtreme Audio as the DVD installation disk I received with the computer shows a diagram of the card, I'm also pretty sure Vista Device Manager reported it as such. Windows 7 's Device Manager however reports it as just the Sound Blaster?X-Fi Xtreme Audio. While trying to find software and drivers manually on Creatives site there are separate drivers for these two cards, the PCI-Express one is version .0.4.0000 dated 30 June 09?and the other is .0.4.0090 dated 2 July 09. Neither of these drivers relate to the driver in Device Manager which Windows reports as version 6.0.0.209 dated 27 August 09. I tried installing the PCI-Express driver .0.4.0000 as they seemed to be the?appropriate drivers but windows reported them as older than the ones installed so I cancelled the installation.
Can anyone advise me on which is the right driver? There seem to be 3 different ones discounting the Beta ones on Creatives site. Creative auto update can't advise me as it's broken, I can't contact Creative directly because I don't have my serial number at hand, why don't they have a tool for checking serial numbers electronically? Non retail Sound Blaster owners have to strip their computers to find stickers on the circuit board as they didn't fit the card themselves!
Can someone also advise me if Alchemy and all?the sound utilities work with Windows 7 64-bit's when I select Windows 7 64-bit as the OS the download list removes everything but the drivers.

sorry for the questions, i did what u wrote but appear the same 5.
- Boot Camp Support Software 4.0.4131
of 664.08 MB
- Boot Camp Support Software 4.0.4255
of 1 GB
- Boot Camp Support Software 4.0.4326
of 894.44 MB
- Boot Camp Support Software 4.0.4033
of 601.76 MB
- Boot Camp Support Software 4.1.4586
of 414.74 MB
dont know wich of, these do i have to download, what i need to know to choose the correct??

X301 and Windows 7

Hello,
I installed Windows 7 on my X301 and have problems with three hardware devices.
One is the fingerprint reader. It is shown in the device manager but I cannot find a vaild driver.
The other two hardware devices I am not able to identify.
Is there a solution for these problems? When will drivers be available for windows 7? (I read the driver announcement post)
Regards,
Mathias
Solved!
Go to Solution.

http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R186441&formatc...
Dell's fingerprint suit can be set-up on X301 instead of lenovo's package - works perfect!
now fo Wimedia device (that is wireless LAN) use the one from System Update (it show 2 Wireless LAN packages) that has "64 bit" in the name and ignore the second...
Install Auto features from Sysem Update - that wil properly enable microphone
Don't install registry patches and Vista Component updates...
Good luck....
P.S. I assume that You running 64bit version of OS... there is no reason to use 32bit on any hardware that allows to run 64bit....
Message Edited by shalamov on 01-31-2009 03:59 AM

Software and drivers for media smart server EX 475 win 8.1

Had to replace my laptop and is now running win 8.1 (64 bit). I need software and drivers for my mediasmart server EX 475 (GG 795 AA)

I'd say go with Middleton BIOS either way (SATA II). In which case, get a newfangled 802.11ac card while you're at it.

Geforce vga bios and drivers

i´ve found a site with a lot of bios and drivers for nvidia vga card series.
http://whitebunny.demon.nl/hardware/chipset_nvidia.html

another good site for the nvidia bios and the likes is http://www.mvktech.net

Software and drivers for Audigy 2 Plati

Hello
I'm reinstalling my audio card and the installation disc has become damaged (scratch)
I went to the downloads area and got confused by all the updates and patches
where do I go to get the basic software and drivers that are the basis of what is getting updated and patched?
Thank you
nic

I'm in the same boat. (but have the Platinum 2 EX) I switched computers and can't find my driver installation disk.
I thought I figured out which was the correct one on the site, but when I attempted to install the latest drivers from the board, it said that is couldn't find the hardware or software necessary... something like that.
For what it's worth, the 2nd to last driver updates did seem to install without problems though; so, you may want to try that one.
At the moment, I'm only getting sound from my front 2 speakers, but this may be because I need the additional Creative software to get the CMSS working and adjust the surround balance.
Has anyone received the message I mentioned when trying to install the latest drivers?
thx

X301 and ubuntu, or RHEL 5x

Hello, a quick search does not return much about linux on x301, so I am going ahead and ask.
I am pondering about purchasing a x301, and I am somewhat concerned by the few reports
found online, that would seem to suggest that there are a handful of issues, and in general
it would seem necessary to go "bleeding edge" on linux.
Some complains about the ALPS touchpad, many about wifi, even wired ethernet.
Ideally I'd like to be able to run RedHat EL.
Supposedly the x301 is "certified" to work with it, check this and this (@lenovo itself).
Does anybody have any good report, or knowledge about my question?
Thanks a lot,
-GF
Message Edited by fossatig on 11-21-2008 03:37 PM

from my 5 minutes of research, RHEL 5.2 has kernel 2.6.18 which got released at september 2006 and updated to 2.6.18.8 at february 2007. RHEL likes to freeze the kernel version for a long time for stability purposes. Remember, RHEL is intended for servers mostly. It is the same main kernel release that Debian Etch uses. Your x301 is a GM45 chipset (like my sl300), which came out this summer in 2008. All the kinks have still not been worked out on this chipset platform in even the most bleeding edge distributions (which employ linux kernel 2.6.27). It most definitely will fail or be troublesome to get working as the developers didn't know much about the hardware at the time RHEL 5 was released. you might get by using an fbdev X driver... then you still have to worry about stuff like ethernet and wireless lan.
If you really need it, I think virtualization with something like virtualbox is your only hope, and I wouldn't attempt to get such an old os running natively on such a new box. To make it work, you'd probably have to recompile your own kernel or install fedora rpms for kernel, Xorg and drivers and such. It'd definitely be a hassle. don't do it.
Vbox from windows is pretty easy... you could get the setup done in like 5 mins... and then you install RHEL from an iso image or cd just like a normal machine. Plenty of documentation online, and you won't have to worry about stuff like wireless.
my 2 cents.
Lenovo SL300 Owner
earning an MSECE at GATech, with undergrad in BME.

Needed Recovery CD and drivers for my Satellite L850-B148

Where can I Get a recovery and drivers cd for my Toshiba Satellite L850-B148?
Recently, I had my motherboard and HDD replaced and win7 freshly installed. But unfortunately, I could not find the CD that came with the laptop. Can you help?

Hello
As I can see doc has already posted the links for drivers download. If you don't have recovery disc for recovery image installation you can install own OS version using Microsoft installation disc. All necessary drivers, tools and utilities you can download from Toshiba download page. Of course you must install them one by one.
In this case your preinstalled OS will not be activated as original recovery image so you must buy valid licence code (product key).
In my opinion best solution for you is to order original recovery installation disc. I don't know where do you live but I hope the link posted by doc will work for you.
Using recovery installation disc the whole package will be installed and when finished it is not necessary to install anything. OS, drivers and all necessary tools and utilities will be installed and configured properly.

C6180 All In One Photosmart. Software and drivers will not install on Windows 8.

C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFO

HI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Is there way to install OS and drivers without recovery CD?

Hi...
I installed my notebook with the recovery cd...
but i get disappointed because it installed a lot of unusual programs...like aol, sonic-pro, games...
is that a way to install windows and drivers only ?? without this boring programs ???
i don't want to uninstall after instalation...it's not the same thing...

Hi
I cant understand user who bye a high performance notebook with many different features and then will not use this functions. Of course, on the Toshiba recovery CD you will find the OS and all Toshiba drivers and utilities. Without this drivers and tools and utilities you will be not able to use the additional Toshiba functions.
But as in the previous posting mentioned you can install the fresh Windows OS and then you can install the drivers. But the easiest way is to use the Tosh recovery CD and then if you want you can remove some applications.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

T400 re-installation OS and drivers

Hello!
My ex-employer donated to me the laptop T400 I used, only hardware.
I would like to re-install the original OS (I think was Vista) and drivers.
How can I proceed?
Thanks in advance.
Solved!
Go to Solution.

Innovator, hello and welcome,
lead_org is right - if you really want Vista.
My opinion - which you didn't ask for: if you are looking at purchasing media, why not purchase Win 7? It will (probably) be more expensive than recovery media, but you'll end up with Win 7.
I've had XP, Vista, and Win 7 on my T400. Win 7 is by far the best on this hardware. Vista was the worst.
My $.02,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Basic questions about agilent34420a and drivers

Hi everybody! I have a few questions.
1) Сan anybody help me and tell where can find driver for Agilent34420A on RS232. On support CD which was together with the device i find only Agilent IO 15 and drivers for agilent 34401 (that in itself is strange)?
2) In certain source code (C#) i saw include one lib - "Ivi.Visa.Interop". Please, explain where it can be found?
3) There any emulators of working devices (agilent/keithley/other)?
Solved!
Go to Solution.

The IVI-C driver from NI is at
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E94B9659CE034080020E748...
You'll have to check with keysight to see if they have a different one.

X301 and ericson F3507g card win7 and drivers nighmares

Similar Messages

Maybe you are looking for