X301 bootup slow after bios loads at windows first splash screen 10min

I have replaced the Hard drive fresh install of XP and removed the CMOS battery to clear it.
I am stil get the same results
"Windows splash screen with moving dots stays on screen 10minutes" at bootup.
what could cause this?
any idea on things to check
All the Lenovo System passed
Solved!
Go to Solution.

updated the bios to 3.07-1.05 that looks to have solved the problem.

Similar Messages

Itunes starts extremely slow after an update of windows 8.1.

Itunes starts extremely slow after an update of windows 8.1.
It takes up to 10 minutus.
If I see the appliction log in event viewer then I see the following errors on the Bonjour service.
For instance:
Client application bug: DNSServiceResolve(a8:fa:d8:3a:1e:8f@fe80::aafa:d8ff:fe3a:1e8f._apple-mobdev2._t cp.local.) active for over two minutes. This places considerable burden on the network.
followed by
SendWakeupPacket error: sent -1 bytes: 10065
What can this be?
Already thanks,
John

I did all the step with save mode and that didn't gave the same result.
Then I created a new account and there itunes started up normally.
So I contued with the user section.
I removed the itunes directory from
c:\Users\username\AppData\Local\Apple Computer\iTunes
This gave the same result in not starting up.
Then I removed the itunes directory from
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
The a popup appears that the Bonjour Service has been disabled.
I looked in services and saw that is was still running.
But I tried to restart this service and it took a long time to stop this service.
Even if I selected restart the Bonjour Service didn't start.
Manually starting was not a problem.
Clicking OK on the popup let itunes start quickly. And closing and starting it again was also quickly.
So Matt thanks for your answer.
If it happens again I have to see if it was the removing of the itunes directory from roaming or restarting the Bonjour Service.

My ipad4 is isreally slow after down loading the new ios8

my iPad 4 is really slow after down loading the ios8 does any one no why this is?

Hi, Joshchestney.
Thank you for visiting Apple Support Communities.
Here are the best steps to go through when an iOS device is unresponsive.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Premiere pro CS4 stops loading at Loading Windows media (splash screen)

I have 4.2.1 and for some reason when i load the program it stops at Loading Windows media (splash screen). I cant edit anything if it wont open and I have a project to finish.. Can some one help me? This is on Vista Ultimate. I have 12g of ram, a i7 950 (3.06Ghz)
Thanks.

After an uninstall, you also need to run the clean script 2-3 times, rebooting between runs, to be sure all remnants are removed from the Registry
CS5 Clean Script http://kb2.adobe.com/cps/829/cpsid_82947.html
or http://www.adobe.com/support/contact/cs5clean.html

Why is my iMac much slower after installing Mavericks. Windows open slowly and Apps load slowly.

Everything seems to be taking much longer. I have a late-2012 iMac with 32 GB of RAM that was blazing fast until I "upgraded" to Mavericks. Now everyithing is slow. Does it use more system resources? I would think that with that much RAM I would have plenty of headroom for the OS. Is anyone else experiencing this?

Here's my suggestion:
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
1. Intel-based Macs: Resetting the System Management Controller (SMC).
2. Repair the Hard Drive and Permissions - Lion/Mountain Lion/Mavericks
Re-download and reinstall Mavericks.
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

790FX-GD70 - Blank screen after bios (never shows Windows Loading screen)

Setup:
Phenom II X4 955
790FX-GD70
750w PC Power and Cooling, Inc PSU
Western Digital HDD
ATI HD2900XT
x-Fi fatality sound card
Windows XP x64 Pro
So hardware wise this setup has not changed in over 8 months. However tonight I restarted (first sound cut out so i decided to reboot). Lo and behold on the reboot, it will flash the MSI splash screen and allow me into the bios but when I go to boot it will not show the windows loading screen. It sends me to an active (my monitor doesn't go into standby) black blank screen (no text or error msg) and won't respond to any keys.
Anyone else ever have similar issues?
Thanks
Verik

I appreciate it guys. I did a little more digging around the internet and found it was most likely due to a corrupted MBR. The fix usually involves booting from a win xp disc and typing in the command "fixmbr" in the recovery program. However I inserted my win xp disc and it simply went black..... then loaded up windows just fine. Pulled the disc out, did a normal restart and it seems to have solved itself.... At this point I'm not sure entirely what it did but I'm just being thankful its working haha.
Appreciate the input guys.

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Desktop Manager Will not Load. Hangs on splash screen when loading, then crashes

My desktop manager is not loading, and hangs whenever it is attempted to load. I have done a clean uninstall, removed rim registry entries, and did a fresh download and install 3 times with full shut downs between each attempt. I am running Windows 7 service pack 1 with an HP Laptop. It is an HP Pavilion dv6 Notebook PC. Product Number LY080UA. I hope that is enough information, but I will give more if asked and informed how to gather such info.
When I right click on the Desktop Manager Icon, I choose to run as Admin. Once it loads the splash screen shows. After a little bit (4-6 seconds) a small Icon appears in my systems tab at the bottom right of my screen. This stays for a little while and then goes away. After this happens the Splash screen hangs, and get a black border around it. If I click on the Splash screen it grey out and says not responding, prompting windows to ask me if I want to wait for the program or close. If I choose to wait, it will sit there and do nothing. If I close it will prompt windows to "look for an error" but has not yet been able to return an answer.
When I log into safe mode, Desktop Manager loads, but does not work well as only a bare bones set of drivers are enabled. If I turn off all but the non-essential services off using services.msc it will load, but again the services needed for it to run and the services for windows to be fully functional are not on at all.
I have attempted to turn off all but the Desktop manager in the start up, using msconfig, but that does not help either.
I am at my wits end here, and would really like some help with this. It loads up (desktop manager) on my Desktop, but I am unable to log that mammoth box around with me while I travel.
Thank you for your time and efforts, I will be very grateful for any and all help.

I'm having the exact same problem here! I'm running Windows 7 Ultimate SP1 x64. Please help! This was posted a month ago.

CS5 Premiere, After Effects, and Encore hang on splash screen - Solution

I just installed Production Premium CS5 on a Windows 7 64 bit system. The install went without a hitch, but when I attempted to start Premiere, After Effects or Encore, they would all hang at some place with the splash screen showing. I spent 2 hours on the phone with Adobe and they never solved the problem. They had me uninstall iTunes and Quicktime, upgrade my nVidea driver and upgrade to a newer version of Quicktime. None of this made a difference and at that point I realized they were not going to fix my problem. The first woman was an idiot and the guy I spoke to next was a lot better, but no solution. Premiere was hanging when loading the Quicktime plug-ins.
Then I had an Aha! moment. I shut off User Account Control, rebooted and then everything worked. I could also get the programs to work with UAC on if I changed the shortcut to "Run as Administrator" but then there would be a UAC prompt. By the way, I was running as a user with full administrator privileges.
I am astounded that Adobe has never encountered this problem before and did not have an immediate solution. Once again, Adobe Tech Support has continued to provide pathetic tech support.
Steve

The plug-ins that were involved in the hang on the splash screen were:
ExporterQuickTimeHost.prm
ImporterQuickTime.prm
The splash screen would hang for 5 minutes on each of these and then if PPro started it would only be a plain white window with the Menu Bar and then there would be no further response.

PLEASE HELP :) PC restarts automatically at windows xp splash screen

i'm about to commit suicide...i bought a K8N Neo4 platinum SLI mobo from a friend from a prefectly working PC...i even sent the mobo back to MSI for that free upgrade for the X2 and 7800 video cards. i also bought new psu, new memory(from the list of compatibles modules from the MSI site) and a new sata2 hdd. It installs windows perfectly and when it finishes and restarts, when the xp splash screen appears, the bar doesnt appear and after a 2 seconds it restarts automatically. a friend told me that it maybe the winxp pro cd that doesnt have the service pack and doesnt recognize the entire size of the hdd sata, so i got a winxp home with the SP1 already inside and it detected the hdd correctly but still does the same stupid thing. another friend told me it was the bios settings for the ram and stuff. i'm out of options and im about to burn it down and buy a brand pc lol. Before this PC i had a athlon xp 2500 with a gygabite mobo and it ran perfectly..then i bought this motherboard and a new psu..reused the memory and the disks drives and it gave me problems, throwing blue screens at installation and copy errors...i swaps memory sticks and psu and it got a little better but still restarted at the splash screen...ok here goes the impossible part. I installed back ALL my original equipment that it was working perfectly fine..and when i installed windows it gave me the same problems as with the new one...how was that possible??...then i decided to buy everything new and it still giving me problems. please help guys.
here are my specs:
K8N NEo4 platinum sli mobo
athlon 64 3800+ (90nm..forgot the core name)
corsair 1gb module valueselect ddr400
western digital sata2 250gb hdd
POWMAX demon psu 580 watts +3.3V@32A, +5V@40A, +12V@24A, [email protected], [email protected], +5vsb@2A
XTASY ati radeon x300SE 256mb pci express
liteon 1663s dvd+-rw
aopen dvdrom
please help :(

Quote from: stonerhino on 07-October-05, 12:44:23
ok i did the isolation thingy . First i disabled my dvdrw drive and when i startedup , the splash screen's bar moved six times and then restarted...theres and advance...it did nothing b4. I changed the memory sticks to old ones i have and did the same thing..so memory it isnt.
FInally i enabled back on my dvdrw and disabled my dvdrom and windows magically boot up perfectly...how a dvdrom drive affect the windows boot?...im still checking if it crashes or reboot again but for now everything is fine...really thanks a lot for ur help guys. By coincidence, the 2 drives were the only things that i reused from my old pc...im installing drivers and we'll see how this turns out
A que te doy una gaznata, te lo dije saca todas las viejeras ese mobo es de clase y no para q estes usando porquerias en el.
By the way I am the guy who sell the mobo to him.

PC stuck after BIOS logo with Windows 8 Fast boot

PC detail;
MSI Z77A-GD65 (latest bios)
MSI GTX 670 Twin Frozr IV PE OC
- Latest driver from NVIDIA website
- Vbios https://forum-en.msi.com/index.php?topic=170399.msg1244850#msg1244850
- GPU .rom file http://www.mediafire.com/download/eqi6yn5d2bb8vgr/GK104.rom
- S/N: 602-V284-030B1301135790
Windows 8 RTM x64 Untouched Version
After successfull flash vbios for my gpu, and install Windows 8 in UEFI mode with Windows 8 Fast boot mode able in bios,
my PC sometime fail to boot to windows after boot logo, stuck at black screen, monitor do not receive any signal and turn into sleep mode.
This happen only after I install the graphic driver. After uninstalling the graphic driver, my PC can boot smoothly without problem.
Is there any solution for this? Do I need to install certain graphic driver for my gpu? or maybe some other thing I need to do to fix it.
Thanks.

Quote from: flobelix on 09-July-13, 03:13:46
Try the older sure working MSI 306.97: http://www.msi.com/service/download/driver-19780.html
Wow, Its work.
Already did many restart and turn on my PC, PC boot to windows smoothly and fast.
Thanks.
But is there no other way to use the latest driver? I wonder if I can get maximum performance without latest driver or not. This driver is already more than half a year old.

Satellite M60 will not boot up after BIOS update through windows

Hi all,
I was updating my bios on my M60 with the latest bios version and I was following the windows flashing procedure (the recommended one) and it blue screened and dumped. Now the laptop wont boot, wont even post. Just a big dead brick :(
I'm fairly proficient with hardware (I'm a software engineer) but I do not know how to reflash a laptop when this sort of thing happens. Is there a trigger bios reset on board? Is there anything I can do my self? If I take it back to my dealer how likely is it they will be able to reflash the bios in house? (Its a fairly large dealer in the Toronto area)
This being a work system I need the solution that has the smallest time impact - cost is not too big an issue.
Any help would be grand,
thanks in advance.

Hello Kristan
According to your problem description I presume the BIOS chip is damaged and unfortunately you can not do much alone. Please contact Toshiba service and explain them the situation. They will explain you everything you must know and you can talk with them about costs and the time they need for notebook repairing.
Bye

Illustrator CC 2014.1 crashes after interface loads up (Windows 8.1)

I was using illustrator cc 2014. It was working fine. But then i updated it to 2014.1. Now illustrator crashes everytime the interface loads up. It shows no error or anything. It loads up fine & crash. I even wiped out c drive & re-install windows. Still not working. Weird thing is that it is working fine on my second computer. I uninstalled it from my main pc & installed it on 2nd one. It works great. It only crashes on my main one. Please help!

Hi Felippe,
If it is Illustrator CC 2014.1(18.1.0) and you are using Extensis Suitecase Fusion then please try following solution given in the article.
http://helpx.adobe.com/illustrator/kb/illustrator-cc-20141-crash-launch.html
Here is the Extensions Suitcase 5 update which I believe will solve the issue.
http://www.extensis.com/support/product-support/suitcase-fusion-5/
Hope this helps.
Please let me know if this is not the case.
Regards,
Sumit Singh

Bootup problem after bios flash

I recently flashed my bios to version 2.50, and now it doesn't boot properly. I think it may have been because of a bad flash, but I am a litte uncertain regarding the symptoms for that ailment. The thing is, I used live update 3.77, and it went through deleting and writing without problem. Then it came to verifying, and half way through I lost video signal. I left the computer on for five minutes without any change, then i turned it off. Since then, it doesn't boot properly. I've used live update successfully before.
The D-bracket goes through 0000, 0001 and 0010 and stops there, some sort of memory problem according to the manual. I've tried another memory stick, I've tried unplugging all devices apart from cpu, ram and video and I've tried clearing CMOS (after I did that, keyboard power on stopped working, does that give anything away?).
Any thoughts on what I could do?
Specs:
MSI 865PE Neo2-FIS2R
Pentium 4 2.8 800 FSB HT
2x256 MB TwinMos CrapTastic PC3200 memory sticks
GeForce Ti4600
All other devices apart from keyboard unplugged

How did you and your friend fair with your MB problems? I've had similar problems with my 865PE NEO2-FIS2R MB being stuck at the "Testing RTC" step as indicated by the D-Bracket. My issues were that the BIOS defaults do not support my memory or AGP Video card. The default voltages are 1.5V for AGP and 2.5V for RAM, but my video card (An MSI AGP Video card: FX5200-TD128 (MS-8911)) does not function well until I set the AGP voltage to 1.7V and my memory sticks (two sticks of Kingston KHX3200K2/256MB) are speced. at 2.6V, but run more stable at 2.65V.
Here is the process that I followed which I have pieced together from other forum posts, including answers from Maesus:
1) Remove ATX Power Connection
2) Move JBAT1 jumper from 1-2 to 2-3
3) Remove battery
4) Remove memory stick(s), leaving only one in bank 1
5) Remove AGP Video card and install PCI Video card.
6) Wait 30 minutes.
7) Reinstall ATX Power connector.
8) Reinstall Battery
9) Move JBAT1 jumper back from 2-3 to 1-2
10) Power up system and go into BIOS setup.
11) Set AGP voltage to 1.7V and memory voltage to 2.65V
12) Save and reboot.
13) Power down.
14) Reinstall memory stick(s).
15) Remove PCI video card and reinstall AGP video card.
I hope this helps, because it has saved me from RMAing my MB a number of times.
BTW, I have had a number of problems with BIOS 2.5 and have done extensive testing: https://forum-en.msi.com/index.php?topic=93100.0
I have come to the conclusion that BIOS 2.5 is not stable when MAT/PAT is enabled (Fast, turbo and ultra-turbo speeds). I may flash the BIOS to 2.4 to see if I can get the MAT/PAT function back and stable.
Take care,
Pete

X301 bootup slow after bios loads at windows first splash screen 10min

Similar Messages

Maybe you are looking for