X31 WinXP USB after standby Code 38

Hallo everyone!
I have a very annoying problem. My Thinkpad X31 supports internally only 802.11b that is too slow today. So I got Fritz!WLAN USB Stick which can 802.11g.
The Problem: The stick stops to work after standby. Worse: Not always. Rarely It works after first standby but by second one for sure. In Device Manager under USB controllers I can see that  "USB mass storage device" has a trouble : 
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory (Code 38)
I guess there is not a problem with WLAN USB Stick but interplay of Windows driver with hardware.
Has anyone idea how i get clue with this problem?
Thanx in advance
P.S. Microsoft  recommends to restart pc. funny guys. :-E

It doesn't matter if it's a Swing timer or a Util timer. It behaves the same either way. That was one of the first things I tried.
I ended up refactoring the code to go from a grid of individual controls (think checker board where each square is a control that draws itself), to a single "board" control that draws a grid. That seems to have fixed the issue. I can go in/out of Standby and the app doesn't eat a ton of CPU any more. The real problem may still be there, just too small of an effect to notice.
I don't know why the original design would work fine before a Standby, but not after. Having ~200 little controls doing repaints twice a second must confuse something in the JVM/Windows versus having 4 large controls doing the same amount of drawing.
It's working, so time to move on.

Similar Messages

  • Audigy2 NX USB not recognized after Standby-M

    Hi,
    if somebody uses a Laptop there is only the possibility to use an USB, Firewire or PCMCIA Soundcard.
    I am using the Audigy2 NX USB with my portable PC (Windows XP SP2 installed).
    When I close the lid of my Laptop and it goes into <EM>Standby-Mode</EM> and then reactivating Windows again an Error Message appears when Music is going to be played.
    The Device seems to have a driver problem.
    I need to reboot Windows XP everytime again when I want to play Sound. :angry:
    (I've installed the newest Soundblasterdrivers and Firmware with Autoupdate!)
    Questions:
    : Is this a known problem?
    2: Is there a solution?
    3: Which external Creative-Soundcards do support Notebookfeatures like Standbymode?
    4: Why aren't 64bit drivers released for Win XP64bit's

    PAPPL wrote:
    Hi,if somebody uses a Laptop there is only the possibility to use an USB, Firewire or PCMCIA Soundcard. I am using the Audigy2 NX USB with my portable PC (Windows XP SP2 installed).When I close the lid of my Laptop and it goes into <EM>Standby-Mode</EM> and then reactivating Windows again an Error Message appears when Music is going to be played. The Device seems to have a driver problem. I need to reboot Windows XP everytime again when I want to play Sound. :angryI've installed the newest Soundblasterdrivers and Firmware with Autoupdate!)?Questions:: Is this a known problem?2: Is there a solution?3: Which external Creative-Soundcards do support Notebookfeatures like Standbymode?4: Why aren't 64bit drivers released for Win XP64bit's
    . Not a known problem at least I dun read it here.
    2. The problem maybe with Windows itself cos I known that the OS have many problem with standby. If you go to microsoft website and do a search in their kbase, you will find many problem occur with USB device after standby.
    3. As say, it may be a problem of OS and not the card.
    4. There are 64bit driver being developed but just not release yet. This is what I found on their kbase.
    http://us.creative.com/support/XPx64/
    Here's one solution I found at microsoft kbase.
    Do not configure your computer to turn off USB devices to save power while the computer is on standby. To do this, follow these steps:
    . Click Start, click Control Panel, and then double-click System.
    2. In System Properties, click the Hardware tab, and then click Device Manager.
    3. In Device Manager, double-click Uni'versal Serial Bus Controllers.
    4. Right-click USB Root Hub, and then click Properties.
    5. In USB Root Hub Properties, click the Power Management tab, and then click to clear the Allow the computer to turn off this device to save power check box.
    6. Repeat steps 4 and 5 for each instance of USB Root Hub that is listed in Device Manager.

  • Swing application eats CPU on resume after standby

    My application contains a mix of regular Swing components and about 200 (small) custom components (JPanels) that draw themselves. The problem is that if put my laptop into Standby, then restart it, the application eats CPU. It goes from ~4% pre standby to ~48% after standby. Totally repeatable. There is only the main thread, the AWT thread and a couple timers firing: one to get data from a server and one to redraw the custom controls to make the control blink (calls repaint() to cue up a call to paintComponent()). I put timing code in the two timer driven threads and both are running fine. NOTE: each of the custom components is just a rectangle with a short text string in it. Think checkerboard with text. The background color is all that is being changed. It's basically a grid of alarm/status "lights".
    I did some searching and only found a reference to a drawing bug that was fixed back in 1.4.x that had to do with WinXP and dual-headed computers.
    Note that another simple Swing application I wrote (no custom controls), doesn't appear to behave this way, so I suspect it has to do with the custom drawing stuff (rolling my own paintComponent() method).
    Any thoughts on how to figure out what is eating the CPU? I'm using NetBeans 6.7 and JDK 1.6_14 under Windows XP.
    Edited by: garrysimmons on Sep 15, 2009 1:52 PM
    Edited by: garrysimmons on Sep 15, 2009 2:57 PM
    Edited by: garrysimmons on Sep 15, 2009 3:02 PM

    It doesn't matter if it's a Swing timer or a Util timer. It behaves the same either way. That was one of the first things I tried.
    I ended up refactoring the code to go from a grid of individual controls (think checker board where each square is a control that draws itself), to a single "board" control that draws a grid. That seems to have fixed the issue. I can go in/out of Standby and the app doesn't eat a ton of CPU any more. The real problem may still be there, just too small of an effect to notice.
    I don't know why the original design would work fine before a Standby, but not after. Having ~200 little controls doing repaints twice a second must confuse something in the JVM/Windows versus having 4 large controls doing the same amount of drawing.
    It's working, so time to move on.

  • Time machine stop back up after standby

    Hi,
    I'm experiencing a problem when time machine tries to perform a backup after coming back from standby. I've been using the same external usb HDD Touro Hitachi 2TB (but only 500 Gb used for a time machine separate partition) since I installed Mavericks almost a year ago and all the backups have been performed without any problem even aftre the Macwakes up after standby. I don't remember very well when this problem started, but probably no more than a couple of months ago. Did anyone experienced a problem like this after installing an OS/X patch?
    Please find attached the error popup. Your help on this will be very appreciated.
    Vincenzo

    After a successful backup in safe mode, I got a failing backup after iMac woke up from stand by. The "Failed to write attrs for" messages are repeated thousands times (I posted just few of them). The time machine hdd was the only external device connected.
    Following the log:
    22/03/14 20:37:48,240 com.apple.backupd[1588]: Failed to write attrs for /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-192753/Macintosh HD/Applications/Xcode.app/Contents/SharedFrameworks/GPUToolsAnalysis.framework/ Versions/A/Resources/English.lproj/AnalyzerFindingShort.strings ({
        "_kTimeMachineNewestSnapshot" = "2014-03-22 18:27:53 +0000";
    22/03/14 20:37:48,240 com.apple.backupd[1588]: Failed to write attrs for /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-192753/Macintosh HD/Applications/Xcode.app/Contents/SharedFrameworks/GPUToolsAnalysis.framework/ Versions/A/Resources/English.lproj/AnalyzerFindingSimplified.strings ({
        "_kTimeMachineNewestSnapshot" = "2014-03-22 18:27:53 +0000";
    22/03/14 20:37:48,241 com.apple.backupd[1588]: Failed to write attrs for /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-192753/Macintosh HD/Applications/Xcode.app/Contents/SharedFrameworks/GPUToolsAnalysis.framework/ Versions/A/Resources/Info.plist ({
        "_kTimeMachineNewestSnapshot" = "2014-03-22 18:27:53 +0000";
    22/03/14 20:37:48,241 com.apple.backupd[1588]: Failed to write attrs for /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-192753/Macintosh HD/Applications/Xcode.app/Contents/SharedFrameworks/GPUToolsAnalysis.framework/ Versions/A/Resources/version.plist ({
        "_kTimeMachineNewestSnapshot" = "2014-03-22 18:27:53 +0000";
    22/03/14 20:37:48,241 com.apple.backupd[1588]: Failed to write attrs for /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-192753/Macintosh HD/Applications/Xcode.app/Contents/SharedFrameworks/GPUToolsCore.framework ({
        "_kTimeMachineNewestSnapshot" = "2014-03-22 18:27:53 +0000";
    22/03/14 20:37:49,102 com.apple.backupd[1588]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
    22/03/14 20:37:49,102 com.apple.backupd[1588]: Error: (-50) SrcErr:NO Copying /Applications to /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-203328.inProgress/292D5491-B329-49F7-A88A-D3A43A3291A9/Macintosh HD
    22/03/14 20:37:49,116 com.apple.backupd[1588]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
    22/03/14 20:37:49,116 com.apple.backupd[1588]: Error: (-50) SrcErr:NO Copying /bin to /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-203328.inProgress/292D5491-B329-49F7-A88A-D3A43A3291A9/Macintosh HD
    22/03/14 20:37:49,156 com.apple.backupd[1588]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
    22/03/14 20:37:49,156 com.apple.backupd[1588]: Error: (-50) SrcErr:NO Copying /cores to /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-203328.inProgress/292D5491-B329-49F7-A88A-D3A43A3291A9/Macintosh HD
    22/03/14 20:37:49,156 com.apple.backupd[1588]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
    22/03/14 20:37:49,157 com.apple.backupd[1588]: Error: (-50) SrcErr:NO Copying /etc to /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-203328.inProgress/292D5491-B329-49F7-A88A-D3A43A3291A9/Macintosh HD
    22/03/14 20:37:49,230 com.apple.backupd[1588]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
    22/03/14 20:37:49,230 com.apple.backupd[1588]: Error: (-50) SrcErr:NO Copying /lib to /Volumes/Time Machine/Backups.backupdb/iMac di Vincenzo /2014-03-22-203328.inProgress/292D5491-B329-49F7-A88A-D3A43A3291A9/Macintosh HD
    22/03/14 20:37:50,028 com.apple.backupd[1588]: Backup failed with error 11: 11
    22/03/14 20:38:02,762 ntpd[454]: ntpd: wake time set +0.212925 s
    22/03/14 20:38:02,803 com.apple.time[1409]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    22/03/14 20:38:02,820 com.apple.time[1409]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    22/03/14 20:39:23,691 com.apple.kextd[17]: Can't load /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBCDC.kext - ineligible during safe boot.
    22/03/14 20:39:23,694 com.apple.kextd[17]: Load com.apple.driver.AppleUSBCDC failed; removing personalities from kernel.
    22/03/14 20:39:23,000 kernel[0]: USBMSC Identifier (non-unique): 10031618019550 0x48d 0x1167 0x100, 2
    22/03/14 20:39:25,965 com.apple.kextd[17]: Can't load /System/Library/Extensions/msdosfs.kext - ineligible during safe boot.
    22/03/14 20:39:25,980 diskarbitrationd[58]: unable to mount /dev/disk2s1 (status code 0x00000047).
    22/03/14 20:40:58,624 SecurityAgent[1624]: MacBuddy was run = 0
    22/03/14 20:40:58,856 WindowServer[487]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    22/03/14 20:41:07,855 SecurityAgent[1624]: User info context values set for amministratore
    22/03/14 20:41:09,243 SecurityAgent[1624]: Login Window login proceeding
    22/03/14 20:41:09,549 WindowServer[487]: Session 257 retained (2 references)
    22/03/14 20:41:09,549 WindowServer[487]: Session 257 released (1 references)
    22/03/14 20:41:09,737 loginwindow[1629]: Login Window Application Started
    22/03/14 20:41:09,759 WindowServer[487]: _CGXNewConnectionPort: Call from workspace.  Updating audit session 100000 -> 100018
    22/03/14 20:41:09,761 loginwindow[1629]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    22/03/14 20:41:09,974 WindowServer[487]: Display 0x41dc9d00: Unit 0; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    22/03/14 20:41:09,975 WindowServer[487]: Display 0x41dc9d00: Unit 0; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    22/03/14 20:41:10,031 launchctl[1632]: com.apple.findmymacmessenger: Already loaded
    22/03/14 20:41:10,657 airportd[69]: _doAutoJoin: Already associated to “TP-LINK_BA906C_rete”. Bailing on auto-join.
    22/03/14 20:41:10,771 WindowServer[487]: _CGXNewConnectionPort: Call from workspace.  Updating audit session 100018 -> 100018
    22/03/14 20:41:10,799 loginwindow[1629]: Login Window Started Security Agent
    22/03/14 20:41:10,872 AirPlayUIAgent[1488]: 2014-03-22 08:41:10.871692 PM [AirPlayUIAgent] Changed PIN pairing: no
    22/03/14 20:41:11,018 SecurityAgent[1640]: MacBuddy was run = 0
    22/03/14 20:41:11,033 SecurityAgent[1640]: User info context values set for amministratore
    22/03/14 20:41:11,365 com.apple.kextd[17]: Can't load /System/Library/Extensions/msdosfs.kext - ineligible during safe boot.
    22/03/14 20:41:11,371 diskarbitrationd[58]: unable to mount /dev/disk2s1 (status code 0x00000047).
    22/03/14 20:41:11,404 parentalcontrolsd[1641]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    22/03/14 20:41:11,495 com.apple.SecurityServer[19]: Session 100018 created
    22/03/14 20:41:11,786 com.apple.kextd[17]: Can't load /System/Library/Extensions/msdosfs.kext - ineligible during safe boot.
    22/03/14 20:41:11,792 diskarbitrationd[58]: unable to mount /dev/disk2s1 (status code 0x00000047).
    22/03/14 20:41:11,856 AirPlayUIAgent[1488]: 2014-03-22 08:41:11.856074 PM [AirPlayUIAgent] Changed PIN pairing: no
    22/03/14 20:41:12,046 AirPlayUIAgent[1488]: 2014-03-22 08:41:12.046408 PM [AirPlayUIAgent] Changed PIN pairing: no
    22/03/14 20:41:12,850 UserEventAgent[1633]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    22/03/14 20:41:13,969 com.apple.kextd[17]: kext com.github.osxfuse.filesystems.osxfusefs  203089000 is in exception list, allowing to load
    22/03/14 20:41:13,977 com.apple.kextd[17]: Can't load /Library/Filesystems/osxfusefs.fs/Support/osxfusefs.kext - ineligible during safe boot.
    22/03/14 20:41:14,031 diskarbitrationd[58]: unable to mount /dev/disk0s4 (status code 0x00000015).
    22/03/14 20:41:14,087 loginwindow[1629]: Login Window - Returned from Security Agent
    22/03/14 20:41:14,117 loginwindow[1629]: USER_PROCESS: 1629 console
    22/03/14 20:41:14,133 mds[41]: (Normal) Volume: Spotlight is disabled on /Users/amministratore 566B52E2-8EAB-4611-ACEB-9E480F6E6A57.  This can impact search in Mail and other applications
    22/03/14 20:41:14,270 airportd[69]: _doAutoJoin: Already associated to “TP-LINK_BA906C_rete”. Bailing on auto-join.
    22/03/14 20:41:14,000 kernel[0]: AppleKeyStore:Sending lock change 0
    22/03/14 20:41:14,410 com.apple.launchd.peruser.501[2038]: Background: Aqua: Registering new GUI session.
    22/03/14 20:41:14,487 com.apple.launchd.peruser.501[2038]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
    22/03/14 20:41:14,489 com.apple.launchd.peruser.501[2038]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    22/03/14 20:41:14,494 launchctl[2041]: com.apple.pluginkit.pkd: Already loaded
    22/03/14 20:41:14,494 launchctl[2041]: com.apple.sbd: Already loaded
    22/03/14 20:41:14,547 distnoted[2043]: # distnote server agent  absolute time: 4950.614426767   civil time: Sat Mar 22 20:41:14 2014   pid: 2043 uid: 501  root: no
    22/03/14 20:41:16,941 accountsd[2072]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    22/03/14 20:41:17,458 WiFiKeychainProxy[2049]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
    22/03/14 20:41:17,459 WiFiKeychainProxy[2049]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    22/03/14 20:41:18,079 accountsd[2072]: /SourceCache/Accounts/Accounts-336.9/ACDAuthenticationPluginManager.m - -[ACDAuthenticationPluginManager credentialForAccount:client:handler:] - 230 - The authentication plugin for account "" (5BFB1EE8-7316-4669-86E1-E898D064D663) could not be found!
    22/03/14 20:41:18,079 accountsd[2072]: /SourceCache/Accounts/Accounts-336.9/ACDAccountStore.m - __62-[ACDAccountStore credentialForAccountWithIdentifier:handler:]_block_invoke389 - 857 - No plugin provides credentials for account . Falling back to legacy behavior.
    22/03/14 20:41:18,477 com.apple.SecurityServer[19]: Session 100020 created
    22/03/14 20:41:18,530 xpcd[2078]: sandbox cache error 3850
    22/03/14 20:41:19,655 tccd[2081]: sandbox cache error 11: database disk image is malformed
    22/03/14 20:41:20,682 com.apple.SecurityServer[19]: Session 100021 created
    22/03/14 20:41:20,920 xpcproxy[2083]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    22/03/14 20:41:22,071 assistantd[2067]: 20:41:22.069 [0x1104f4000] Error getting default input device: 0 ()
    22/03/14 20:41:22,072 assistantd[2067]: 20:41:22.071 [0x1104f4000] AVVoiceController: unknown record device
    22/03/14 20:41:22,072 assistantd[2067]: 20:41:22.071 [0x1104f4000] AVVoiceController: init failure
    22/03/14 20:41:22,073 assistantd[2067]: 20:41:22.072 [0x1104f4000] Error getting default input device: 0 ()
    22/03/14 20:41:22,073 assistantd[2067]: 20:41:22.073 [0x1104f4000] ERROR: line 741: status 560227702 ('ved!')
    22/03/14 20:41:22,277 xpcproxy[2087]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    22/03/14 20:41:22,335 assistantd[2067]: <Error>: Speech - Error initializing voice controller with device (null) Error Domain=NSOSStatusErrorDomain Code=-1 "The operation couldn’t be completed. (OSStatus error -1.)" (kCFStreamErrorHTTPParseFailure / kCFSocketError / kCFStreamErrorDomainCustom / kCSIdentityUnknownAuthorityErr / qErr / telGenericError / dsNoExtsMacsBug / kMovieLoadStateError / cdevGenErr: Could not parse the request/response. /  / custom to the kind of stream in question  /  / queue element not found during deletion /  / not a SysErr, just a placeholder  /  / General error; gray cdev w/o alert)
    22/03/14 20:41:25,620 sandboxd[195]: ([2067]) assistantd(2067) deny file-read-data /Library/Frameworks/TSLicense.framework/Versions/A/TSLicense
    22/03/14 20:41:27,280 launchproxyls[2046]: Waiting for Launch Services seeding, UID 501
    22/03/14 20:41:27,439 com.apple.launchd.peruser.501[2038]: (com.apple.mrt.uiagent[2058]) Exited with code: 255
    22/03/14 20:41:28,082 secd[2079]:  SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    22/03/14 20:41:28,082 secd[2079]:  securityd_xpc_dictionary_handler WiFiKeychainProx[2049] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    22/03/14 20:41:28,178 parentalcontrolsd[2096]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    22/03/14 20:41:28,497 mds[41]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    22/03/14 20:41:28,571 UserEventAgent[2042]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    22/03/14 20:41:29,205 sharingd[2099]: Starting Up...
    22/03/14 20:41:29,364 WindowServer[487]: Session 257 is switching to console
    22/03/14 20:41:30,110 com.apple.time[2042]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    22/03/14 20:41:30,601 CVMCompiler[2101]: sandbox cache error 3850
    22/03/14 20:41:31,942 storeagent[2098]: sandbox cache error 1: no such table: profiles
    22/03/14 20:41:33,366 com.apple.SecurityServer[19]: Killing auth hosts
    22/03/14 20:41:33,367 com.apple.SecurityServer[19]: Session 100016 destroyed
    22/03/14 20:41:34,650 com.apple.SecurityServer[19]: Session 100022 created
    22/03/14 20:41:38,697 ReportCrash[2104]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    22/03/14 20:41:39,008 mds[41]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    22/03/14 20:41:39,060 mds[41]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    22/03/14 20:41:39,061 mds[41]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    22/03/14 20:41:39,311 gamed[2077]: CKSoftwareMap: Registering with Daemon
    22/03/14 20:41:39,915 com.apple.NotesMigratorService[2108]: Joined Aqua audit session
    22/03/14 20:41:42,317 loginwindow[45]: CGSGetNextEventRecord (Inline) connection 0x6407, 32768 bytes
    22/03/14 20:41:42,318 Finder[1438]: CGSGetNextEventRecord (Inline) connection 0xc103, 32768 bytes
    22/03/14 20:41:42,318 PhotoStreamAgent[1500]: CGSGetNextEventRecord (Inline) connection 0x761f, 32768 bytes
    22/03/14 20:41:42,318 SystemUIServer[1437]: CGSGetNextEventRecord (Inline) connection 0x8607, 32768 bytes
    22/03/14 20:41:42,318 NotificationCenter[1424]: CGSGetNextEventRecord (Inline) connection 0x8c0b, 32768 bytes
    22/03/14 20:41:42,318 com.apple.ShareKitHelper[1474]: CGSGetNextEventRecord (Inline) connection 0x9b0b, 32768 bytes
    22/03/14 20:41:42,318 AirPlayUIAgent[1488]: CGSGetNextEventRecord (Inline) connection 0xb4bb, 32768 bytes
    22/03/14 20:41:42,318 Dock[1436]: CGSGetNextEventRecord (Inline) connection 0xdc03, 32768 bytes
    22/03/14 20:41:42,318 ARDAgent[1475]: CGSGetNextEventRecord (Inline) connection 0xdf03, 32768 bytes
    22/03/14 20:41:42,318 com.apple.dock.extra[1496]: CGSGetNextEventRecord (Inline) connection 0xe39b, 32768 bytes
    22/03/14 20:41:42,319 gamed[1444]: CGSGetNextEventRecord (Inline) connection 0xe107, 32768 bytes
    22/03/14 20:41:42,319 com.apple.internetaccounts[1480]: CGSGetNextEventRecord (Inline) connection 0xe803, 32768 bytes
    22/03/14 20:41:42,319 Console[1510]: CGSGetNextEventRecord (Inline) connection 0xf703, 32768 bytes
    22/03/14 20:41:42,319 Mail[1576]: CGSGetNextEventRecord (Inline) connection 0x10253, 32768 bytes
    22/03/14 20:41:42,319 com.apple.WebKit.WebContent[1583]: CGSGetNextEventRecord (Inline) connection 0xf9b7, 32768 bytes
    22/03/14 20:41:42,319 EscrowSecurityAlert[1567]: CGSGetNextEventRecord (Inline) connection 0x1061b, 32768 bytes
    22/03/14 20:41:42,319 TextEdit[1592]: CGSGetNextEventRecord (Inline) connection 0x117a3, 32768 bytes
    22/03/14 20:41:42,319 com.apple.internetaccounts[2087]: HIToolbox: received notification of WindowServer event port death.
    22/03/14 20:41:42,319 AOSPushRelay[2076]: HIToolbox: received notification of WindowServer event port death.
    22/03/14 20:41:42,321 NotificationCenter[2057]: HIToolbox: received notification of WindowServer event port death.
    22/03/14 20:41:42,321 SystemUIServer[2070]: CGSNewWindowWithOpaqueShape: Cannot create window
    22/03/14 20:41:42,328 loginwindow[45]: CGSFlushSurfaceWithOptions
    22/03/14 20:41:42,329 Finder[1438]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,329 PhotoStreamAgent[1500]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,329 SystemUIServer[1437]: CGSGetNextEventRecord (Inline) connection 0x9103, 32768 bytes
    22/03/14 20:41:42,329 NotificationCenter[1424]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,330 com.apple.ShareKitHelper[1474]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,330 AirPlayUIAgent[1488]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,330 Dock[1436]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,330 ARDAgent[1475]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,330 com.apple.dock.extra[1496]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,331 gamed[1444]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,331 com.apple.internetaccounts[1480]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,331 Console[1510]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,331 Mail[1576]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,332 com.apple.WebKit.WebContent[1583]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,332 EscrowSecurityAlert[1567]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,332 TextEdit[1592]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,333 com.apple.internetaccounts[2087]: port matched the WindowServer port created in BindCGSToRunLoop
    22/03/14 20:41:42,333 AOSPushRelay[2076]: port matched the WindowServer port created in BindCGSToRunLoop
    22/03/14 20:41:42,333 NotificationCenter[2057]: port matched the WindowServer port created in BindCGSToRunLoop
    22/03/14 20:41:42,328 loginwindow[45]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,329 SystemUIServer[1437]: CGSGetNextEventRecord (Inline) connection 0xe047, 32768 bytes
    22/03/14 20:41:42,329 SystemUIServer[1437]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,353 SystemUIServer[1437]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,353 SystemUIServer[1437]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,354 SystemUIServer[1437]: CGSConnection: serious error: CID 34311 is dead.
    22/03/14 20:41:42,343 UserEventAgent[1409]: CGSGetNextEventRecord (Inline) connection 0xe603, 32768 bytes
    22/03/14 20:41:42,356 UserEventAgent[1409]: shutdown_server_connections: Detaching application from window server
    22/03/14 20:41:42,366 loginwindow[45]: CGSDeviceGetGeometry: Invalid device window
    22/03/14 20:41:42,366 loginwindow[45]: CGSDeviceGetGeometry: Invalid device window
    22/03/14 20:41:42,366 loginwindow[45]: CGSDeviceSynchronize: Invalid device window
    22/03/14 20:41:42,366 loginwindow[45]: CGSConnection: serious error: CID 25607 is dead.
    22/03/14 20:41:42,393 Dock[1436]: CGSConnection: serious error: CID 48131 is dead.
    22/03/14 20:41:42,392 com.apple.launchd[1]: (com.apple.WindowServer[487]) Job appears to have crashed: Abort trap: 6
    22/03/14 20:41:42,396 SystemUIServer[1437]: CGSDeviceGetGeometry: Invalid device window
    22/03/14 20:41:42,396 SystemUIServer[1437]: CGSDeviceGetGeometry: Invalid device window
    22/03/14 20:41:42,397 SystemUIServer[1437]: CGSDeviceGetGeometry: Invalid device window
    22/03/14 20:41:42,397 SystemUIServer[1437]: CGSDeviceGetGeometry: Invalid device window
    22/03/14 20:41:42,397 SystemUIServer[1437]: CGSDeviceGetGeometry: Invalid device window
    22/03/14 20:41:42,440 Dock[2069]: CGSNewWindowWithOpaqueShape: Cannot create window
    22/03/14 20:41:42,441 Dock[2069]: CGSNewWindowWithOpaqueShape failed 268435459 wid=0x0
    22/03/14 20:41:42,452 Dock[1436]: Backtrace (at 4978.46):
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  0   CoreGraphics                        0x0000000104f7aad9 CGSBacktraceCreate + 59
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  1   CoreGraphics                        0x000000010521fafa CGSLogBacktrace + 15
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  2   CoreGraphics                        0x0000000104f7ae8c _ZN12_GLOBAL__N_18Registry12zombie_checkEj + 56
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  3   CoreGraphics                        0x0000000104f7adf5 CGSConnectionRegistryCheckConnectionID + 55
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  4   CoreGraphics                        0x0000000104f7ad55 CGSConnectionByID + 190
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  5   CoreGraphics                        0x0000000104fab40c CGSGetNextEventRecordInternal + 28
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  6   CoreGraphics                        0x000000010503b3a8 CGSGetNextEventRecord + 93
    22/03/14 20:41:42,452 Dock[1436]: CGSConnection: current backtrace::  7   Dock                                0x0000000102b51c2d Dock + 89133
    22/03/14 20:41:42,453 Dock[1436]: CGSConnection: current backtrace::  8   Dock                                0x0000000102c2e2e9 Dock + 991977
    22/03/14 20:41:42,453 Dock[1436]: CGSConnection: current backtrace::  9   libdispatch.dylib                   0x0000000105f462ad _dispatch_client_callout + 8
    22/03/14 20:41:42,453 Dock[1436]: CGSConnection: current backtrace::  10  libdispatch.dylib                   0x0000000105f488a1 _dispatch_source_invoke + 413
    22/03/14 20:41:42,453 Dock[1436]: CGSConnection: current backtrace::  11  libdispatch.dylib                   0x0000000105f4deaa _dispatch_main_queue_callback_4CF + 244
    22/03/14 20:41:42,453 Dock[1436]: CGSConnection: current backtrace::  12  CoreFoundation                      0x0000000105a7e679 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 9
    22/03/14 20:41:42,453 Dock[1436]: CGSConnection: current backtrace::  13  CoreFoundation                      0x0000000105a39954 __CFRunLoopRun + 1636
    22/03/14 20:41:42,453 Dock[1436]: CGSConnection: current backtrace::  14  CoreFoundation                      0x0000000105a390b5 CFRunLoopRunSpecific + 309
    22/03/14 20:41:42,454 Dock[1436]: CGSConnection: current backtrace::  15  Dock                                0x0000000102b411c3 Dock + 20931
    22/03/14 20:41:42,454 Dock[1436]: CGSConnection: current backtrace::  16  libdyld.dylib                       0x0000000105f7d5fd start + 1
    22/03/14 20:41:42,454 Dock[1436]: CGSConnection: current backtrace::  17  ???                                 0x0000000000000001 0x0 + 1
    22/03/14 20:41:42,454 Dock[1436]: Backtrace (at 260.016):
    22/03/14 20:41:42,454 Dock[1436]: CGSConnection: creation backtrace::  0   CoreGraphics                        0x0000000104f7aad9 CGSBacktraceCreate + 59
    22/03/14 20:41:42,454 Dock[1436]: CGSConnection: creation backtrace::  1   CoreGraphics                        0x0000000104f7a7bc CGSConnectionRegistryAddConnectionID + 400
    22/03/14 20:41:42,454 Dock[1436]: CGSConnection: creation backtrace::  2   CoreGraphics                        0x0000000104f79b5c CGSNewConnection + 1028
    22/03/14 20:41:42,454 Dock[1436]: CGSConnection: creation backtrace::  3   Dock                                0x0000000102b46ede Dock + 44766
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  4   Dock                                0x0000000102b46b34 Dock + 43828
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  5   Dock                                0x0000000102b45d44 Dock + 40260
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  6   Dock                                0x0000000102b454a3 Dock + 38051
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  7   Dock                                0x0000000102b453ba Dock + 37818
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  8   Dock                                0x0000000102b44e78 Dock + 36472
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  9   Dock                                0x0000000102b40f33 Dock + 20275
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  10  libdyld.dylib                       0x0000000105f7d5fd start + 1
    22/03/14 20:41:42,455 Dock[1436]: CGSConnection: creation backtrace::  11  ???                                 0x0000000000000001 0x0 + 1
    22/03/14 20:41:42,653 com.apple.internetaccounts[1480]: Interrupted error received
    22/03/14 20:41:42,653 com.apple.ShareKitHelper[1474]: Interrupted error received
    22/03/14 20:41:42,741 UserEventAgent[16]: Captive: [UserAgentDied:142] User Agent @port=70671 Died
    22/03/14 20:41:42,744 PhotoStreamAgent[1500]: Interrupted error received
    22/03/14 20:41:42,798 librariand[1471]: server connection is invalid: Connection invalid
    22/03/14 20:41:42,851 identityservicesd[1429]: Quit - notifying about shutdown
    22/03/14 20:41:42,852 imagent[1428]: Quit - notifying about shutdown
    22/03/14 20:41:42,866 identityservicesd[1429]: Quit - shutting down daemon
    22/03/14 20:41:42,868 com.apple.internetaccounts[1480]: /SourceCache/Accounts/Accounts-336.9/ACAccountStore.m - __60-[ACAccountStore _connectToRemoteAccountStoreUsingEndpoint:]_block_invoke - 130 - The connection to ACDAccountStore was interrupted.
    22/03/14 20:41:42,868 imagent[1428]: Quit - shutting down daemon

  • Satellite Pro A300 - After standby the mouse stops working

    Hi all,
    Really hope you can help me out wiht this problem as I believe I have tried anything I know and my next step is formating the whole computer again and still not knowing if it will work this time, as this is what I just did, when upgrading to win 7.
    I have 2 problems:
    When computer goes on standby and I start it backup - the mouse stops working, unless i move it to another usb-port. I get a message aswell about usb can perform faster...
    Another problem is a program freezing at this point aswell, this program is Oracle JDeveloper, do not know if this has any relevance??
    I have tried updating EVERY driver from toshibas webpage- theese problems still occur...
    Please help!
    Would rather not format again...!
    // Christian

    Hi
    Can you please tell us what Windows 7 version you have installed? I mean if you have 32bit or 64bit.
    Is this right that you are using an external mouse?
    Does the touchpad work after standby mode? If yes I think its something wrong with the external mouse maybe.
    By the way: Make sure that you are using newest BIOS version. You can find it on the Toshiba page.
    And regarding the Oracle question I think you should contact the Oracle support directly. ;)

  • WiFi Problems after standby

    Hi,
    I am having problems with the PB's WiFi connectivity after returning from standby. Even though it appears as connected (full signal) I have to turn the WiFi connection off and on to be able to browse.
    Anyone else having this problem?
    Thanks in advance.

    Just to let you know that I have had a solution for the standby/resume probelm from another site.
    FYI below.
    However the WiFi Driver and SSL VPN stopping WiFi and WLAN conectivity is still an issue.
    PAUL
    Solution to Standby Resume error....... 
    net stop wzcsvc
    sc config wzcsvc start= disabled
    Another satisfied customer here!  I updated a couple of days ago to SP3 on my WinXP Pro system.  I had the exact same problem (wzcsvc crash after standby/hibernate) and solution.  What I don't know is if WZC was previously running in my SP2 installation or not, though I have no wireless device installed in this computer and SP3 was one of the only variables to consider.
    BUT... I DO have an Asus P5B Deluxe motherboard.  Now, that alone isn't very interesting except they made two flavors of this board: one with a wireless adapter (Deluxe/WiFi) and one without (just Deluxe).  I have the one "without" but if SP3 looked at the system and didn't make that distinction it's possible SP3 decided Wifi was present perhaps based on the BIOS (which is the same for the Wifi and non-Wifi version of the mobo, as I recall) and installed and/or enabled the WZC service!
    This bug (in SP3 itself or specifically WZC for failing this way) would be worth noting and fixing because I suspect lots of PCs out there have WiFi capability in the BIOS but possibly not the actual WiFi hardware. I personally hope others I've seen posting about this issue in SP3 find THIS thread useful.  I'm very glad to have standby/hibernation working again!
    By the way, of all the svchost processes the one with WZC in it had 30 total services attached to it.  I'm curious why this process is so "overloaded" (if that's an accurate description) versus the other svchot processes which each only have a few services or less attached to them?  Also, when it would fail and restart that svchost process only a handful of them actually came back (less than half!)  I'm curious why that is as well...

  • Satellite A100-049: CDs and DVDs don't read after standby

    I have a new satellite A100-049 that came with vista home premium pre-installed. After returning to the computer from sleep/standby (Whatever the mode is when the light pulses yellow) no discs can be read in the drive. The disc will spin continually but nothing will happen.
    Everything works fine when the computer is turned on first time, but after sleep it stops reading discs. Is there anything I can do about this?

    It doesn't recognize it when i re-insert it or put it in fresh after standby. It just keep spinning without loading. Wierd thing is, if i try to load a program with the disc spinning and by clicking on the desktop icon and then take the disc out while it isn't loading I get a message saying please insert disc

  • TS2988 Iphone 3gs will no longer play streaming music though usb after i0s 5.0 update. Aux still works normally.

    i phone will not play streaming music through usb after ios 5.0 update. updated to 5.1.1 did not not correct problem.

    i phone will not play streaming music through usb after ios 5.0 update. updated to 5.1.1 did not not correct problem.

  • How do i get my photos back on usb after editing in iphoto. i used export but after checking my photos were not back on usb?

    how do i get my photos back on usb after editing. i used export but after checking my photos were not back on usb?

    You're really going to need to explain that. What's "USB"? Do you mean a Disk, Drive or volume connected by USB? How is your iphoto set up? What version are you using?
    Regards
    TD

  • Use of secondary router's USB after a Bridge

    Please excuse me if my terminology isn't right.
    Considering how the USBs on the Actiontec are useless for what I'd wish to use them; that is, for access to my external hard drive(s) I was thinking about the following:
    Making use of a secondary router's USB after bridging it to the Actiontec router.
    So my question: Would this work as I'd hope? Having access to my external drive through the secondary router?
    Have spent enough time looking at NAS options and it doesn't appear to be a good option for me at the moment. 
    Thanks in advance. ;-)

    Well, technically there's no such thing as unathorized use of the signal. It's a radio, and federal rules explicitly permit people to receive from and transmit to it using any FCC approved hardware so long as the person has a license for the frequency or a license is not required for the particular use at that frequency.
    If you are talking about unauthorized access to your network, it's easier to detect successful than unsucessful accesses. Generally speaking, none but certain higher-end wireless access points have any sort of logging of connection attempts or intrusion detection. If you use a computer, rather than a dedicated access point, you can ususally set up some logging and intrustion detection software (I don't know how on OS X yet, but in Linux it's quite doable).
    Another option is to use Wireless Snooping software to actively monitor and capture wireless packets in the area and try and identify packets aimed at your access point that don't come from one of your machines. I don't knoe if AirSnort is available for Mac OS X yet, but something like it will work.
    Of course, once the individual actually establishes a connection, their machine will show up in the router's list of wireless connections.
    Assuming you use WPA2 encryption, you're not likely to see even a dertmined hacker breaking in (unless you use a phenomenally bad passkey).

  • After standby no 1Gbit Lan

    Hello,
    I use a T500 5253 with a Intel 82567LM Gigabit network adapter.
    After standby, I loose the gigabit connection to the router. You have to deactivate and activate the adapter again, otherwise it will be fixed at 100 Mbit/s. The driver built-in diag method fails and return only "100 Mbit possible" after a standby.
    LAN driver version: 10.1.17.0
    Intel ProSet version 18.2.63.0
    the energy settings are on maximum, the network card is not allowed to reduce speed for energy saving.
    Does a work around exists?
    Thinkpad T500 2082-52g
    HDD changed into SAMSUNG HM500LI
    Microsoft Windows 6.1 Built 7600 - Windows 7

    I would begin by updating your version of OS X to 10.7.4, if you have not done so already, according to your profile.  That indeed may solve it.
    Hope this helps

  • Processor speed after Standby Mode

    I have the T400 with  Windows XP (32bit).  Dual P8600 2.4GHz processors & 3GB memory.  Fairly new computer so there is plenty of space.
    I run a macro out of Excel every day.  When I run the program it takes about 15 to 20 mins and Excel struggles to move.  This is normal with this laptop and it is annoying.  I found that there have been times when the program runs fast as it should - fast as in 4 minutes.  Processing speed is clearly faster but all programs are the same.  I have also come to realize today that it runs faster after it comes out of Standby Mode.  If I shut down and then re-start the computer and then run the program out of Excel it takes 20 minutes.  If I start up, then go to standby then come out and run the program it runs in 4 minutes.
    What would cause this? Is there some background process that stops after Standby that would allow the processors to perform as they should?
    Thanks

    is your CPU throttling down. Download HWinfo32 and check the cpu speed when the excel is running slow (the 20 minutes).
    also are you running the laptop with the battery inserted? and do you have the latest thinkvantage power manager installed? what version of the bios firmware are you running?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Thinkpad X300 with windows xp sp2 gets blue screen after standby.

    We have a Thinkpad X300 (with windows xp sp2) gets blue screen after standby. I mean after you close the lid then open it. Anyone has see this kind of behave before?
    Thanks,

    I have found the solution to this problem - hope you are still watching the thread.
    Express install in parallels seems to be the culprit. Do a custom install instead and set your own virtual hard disk size. I set mine to 12 Gb (12000 Mb)and made it a fixed size instead of "growing" or whatever the heck parallels calls it. I also chose shared network instead of "bridged" (I read that someone else had identified this as part of the problem).
    After making those changes it worked like a charm.

  • Airport does not reconnect after standby...

    Is anyone having issues w/ wireless not reconnecting after standby? In order to resolve the problem, I have to turn airport off then back on. Most of the time I can get back on using on/off method, but seldomly I have to reboot. This is my config:
    SSID is not broadcasted, using capital letters and numbers for SSID Name.
    WPA TKIP set for router encryption. WPA Personal selected on Airport.
    I don't seem to have this problem on my Macbook running Leopard, so I'm pretty sure it's hardware/driver related to my Macbook Pro. I have to keep tabs on this, but I almost think this problem does not appear when a network SSID is broadcasted and/or unecrypted. It could be my imagination but not sure.
    Any ideas or same issues out there?

    I always have the same problem; I assume it has something to do with the fact that I regularly switch my cable modem to "standby" when done surfing the internet. Seemingly Airport loses the signal (or whatever) because the modem isn't feeding a signal being in standby mode? When I turn the modem back on, I have to turn Airport back on as well. So far, I've just felt it to be a small inconvenience.

  • HT201209 I entered the code for an app. Put my apple id after the code. Dialogue box said downloading, but no app to be found. Pls help. Thx

    I entered the code for an app. Put my apple id after the code. Dialogue box said downloading, but no app to be found on my iPad 3. Pls help. Thx

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Unfortunately she has been misdirecting folks with that update bug link for far too long.
    Candidly, when you see the Apple ID for a stranger appear in the Mac App Store (MAS) on your Mac regarding an update for an app that you haven't bought, it is a notice that you have a pirated app that you got from an outside source. Some trial version or a "free" version is actually a MAS version that someone has cracked and is distributing.
    Finding a pirated app
    All MAS apps have a MAS receipt in their app bundle. Check any app acquired from the MAS. Right click on the app's icon in your Apps folder and choose Show package contents. In the Contents folder is a _MASReceipt folder and in that folder is the coded MAS receipt. It has the Apple ID of the MAS account that bought/acquired the app from the MAS. It is that receipt that the MAS uses to alert you that an app has an update. There would not be a notice of an update with someone else's Apple ID showing in the MAS on your Mac, if there was not an app with a receipt from this person's account somewhere on your Mac.
    Download the free app FindAnyFile (FAF);
    http://apps.tempel.org/FindAnyFile/
    This app is easier to use and seems to be more powerful than Spotlight. Open FAF and in the box type _MASReceipt and press Find. It should come up with a list of every app on the Mac with a MAS receipt. Compare the apps with receipts in FAF's list with your purchased apps list in the Mac App Store. The odd app out should be the pirated app.

Maybe you are looking for

  • Black Screen with cursor. Java Desktop System.

    Hello everyone. I've installed Solaris 10 05/08 x86 32bit in VMWare Workstation 6.5. After I logged in in the system (Java Desktop System, Release 3), I've got only a black screen with cursor, nothing more. X server: Xsun server configuration: Video

  • How can I sync my notes from iPhone 3GS to MacBook Pro?

    How can I sync my Notes from the iPhone 3GS running IOS 6.0.1 to my MacBook Pro running OSX 10.8.2?

  • FSB + Other troubles.

    I have been having many issues with my new MSI K7T266-Pro-A. Here are my problems: 1) I have a xp1800, with a new badass fan. I have a 420w ps along with a msi geforce2 TI. My average cpu temp is between 100 - 110 f.  I have a big server case, so tha

  • Help Can't buy songs!!!!!

    This message keeps comin up: We're sorry we cannot complete your request on the itunes store at this time. Please help, CE Nano    

  • Error occured signing in

    all paid up, password etc gets me into adobe but trying to convert pdf to doc.  I get error occured signing in. vanapagan