X3200 m2 server tower systemboard speaker or audio (where the beeps come from)

im experimenting with the server (x3200 m2) tower. trying to locate the audio connector on the system board (i know there is no sound card onboard). but im curious to know where the beeps (when boot up with error ect) comes from there must be some kind of internal speaker or some sort. that is what im after.
Solved!
Go to Solution.

since the X3200 M2 has no external speaker, look for a piezoelectric speaker on the motherboard. it will be a small black plastic cylinder with a hole in the middle. in that hole should be silver metal.
the third photo in this article shows what an internal computer speaker looks like. these are found on many motherboards, graphics cards, and RAID cards.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

Youtube videos show up as a blank but still play the audio. where the video should be is a blank space on firefox 4 rc

Youtube videos show up as a blank but still play the audio. where the video should be i s a blank white space.
They were working fine last week

Try if disabling the hardware acceleration in the Flash Player help.
See [[Cannot view full screen Flash videos]]
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Please help me with one question . I have a problem with the left earphone. The sound comes from the speaker on the other side and lower. What is it? I will be grateful for the answer!

Выберите свой поддержка Сообщества Apple, Имя пользователя .
Ваше имя пользователя является ваш публичная идентичность в поддержку общин Apple. Она не может быть изменена после создания учетной записи .
Пожалуйста, помогите мне с одним вопросом. У меня есть проблема с левой наушников. Звук поступает из динамика на другой стороне и ниже. Что это такое? Буду благодарен за ответ!

Not clear what you are asking
However be aware the iPhone only has ONE external speaker at base of iphone the other grill is a microphone
The speaker is on right below screen

How to receive emails of the same inbox from in a Weblogic Server cluster

Hi All,
I have an application running on WebLogic Server with 6 instances. Many requests for the application come from Email. We already set up an email account that will be used by all clients to send email to. But the problem is that the email account inbox can only be opened for reading by a single connection, unlike a typical database. Currently I can only deploy the email reading service on a single server instance, this will effectively create a single point of failure and unbalanced load. What's the best way to read from the same inbox from multiple servers? I am thinking developing something using a database table, sort of leasing, whoever locked the table own the lease and can connect to the email server, but this is pretty hard to implement correctly in all circumstances.
I did an intensive search on the internet, but couldn't find anything.
I appreciate your help very much.
Thanks
Tao

Hi Aditya
By default, OPA 10.4 will collect the minimum amount of information needed to answer the goal of your interview and then display the answer and the reasons for the answer.You can change what appears on these screens within OPM itself (you don't need to change those settings).
So I would:
- add a Summary Screen to your project (if you haven't already)
- add <your goal attribute> to your summary screen. This will display as a link if the goal is unknown and as a sentence showing the outcome and a Why? link when it is known.
- add a label to the summary screen, providing information about the outcome (eg "Congratulations you are eligible") or simply show the value of the outcome (eg Your total deduction is %deduction_amount%).
- use visibility rules to control which items to display at the start/end of your interview (in your case, maybe hide your goal once it is known and show your label once your goal is known). See OPA help topic "Tutorial: Hiding and displaying summary screen elements".
The Inferred Brand Discount sample supplied in the OPM install provides an example of this (see Help topic Sample Rulebases for information on how to open this).
Hope that helps,
Fiona

RMI call back - How to refer to the client project from the server project?

Hi, I am working on an RMI assignment which basically needs me to use the RMI call back for the server to notify the clients.
I have 2 projects , one for the client and another for the server.
In the client project, I have a client interface and the main client class implements this interface.
In the server project, I have a server interface and a class that implements this interface.
I can use the server interface in the client project's code by adding the server project in the path of the client project. it lets me use the server interface in the code if I put "import.." statement.
But the issue is I can not do the same to access the client interface from within the server project's code. Since that will be a circular reference, the compiler does not let me use the client interface from within the server's code. This is putting me in a great difficulty and I am stuck here. What should I do so that I can use the client interface and the compiler won't complain?
Thanks for any help..
Regards.. js

Let me explain what I tried: I manually generated stub class of the client using the Eclipse IDE as mentioned in my previous message. The StockMSClient_Stub.class got created in my client project.
The common project has the 2 interfaces - one from the client and one from the server.
I have added reference to the common project from the client and server projects to use the interfaces.
With the above mentioned in place, when I run the server project, the registry binding of the server objects is very fine. But I am getting error in the applet at the line where I am passing the client object to the method provided by the server interface. The following is the code snippet in the applet where I am getting the error.
specifically the line: String response = objs.login(userId, password, smsClient);     ====================
public void login() {
            Registry reg = null;
            String userId = "test";
            String password = "test";
            this.smsClient = new StockMSClient();
            try {
     reg = LocateRegistry.getRegistry(rmiHost,rmiPort);
                      UserInterface obj = (UserInterface) reg.lookup(rmiStrings
                                                                                                                    [1]);
     User u = obj.find(userId);
     if (u == null) {
          System.out.println("This user is not valid");
     } else {
                     UnicastRemoteObject.exportObject(smsClient);
     reg = LocateRegistry.getRegistry(rmiHost, rmiPort);
     LoginLogoutInterface objs = (LoginLogoutInterface) reg
                             .lookup(rmiStrings[0]);
                    //getting error at the following line.
                    String response = objs.login(userId, password, smsClient);
                     System.out.println("response :" + response);
           } catch (AccessException ae) {
                   System.out.println(ae);
           } catch (NotBoundException nbe) {
                  System.out.println(nbe);
           } catch (RemoteException re) {
                  System.out.println(re);
} //end login()====================
Error is:
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
     java.lang.ClassNotFoundException: sms.rmi.graphics.StockMSClient_Stub (no security manager: RMI class loader disabled)================
I don't know why this is happening..Please help.
thanks & regards, js
Message was edited by:
jsitaraman

When typing a text message my iPhone 4 now speaks some of the words as I type. Where did this feature come from and how do I turn it off?

When typing a text message on my iPhone, a voice now speaks some of the words. Where did this come from and how do I turn it off?

You have VoiceOver turned on. See p. 230... http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Make the app sounds come from the front speaker?

Hello,
is there any way to make the sounds from the apps come from the front speaker? When I hold the phone sideways my hands block the lateral speakers, making it quite hard to hear, so if there was a way to change the speaker the apps use, that would be great!
I'm aware I can just change the way I hold the phone, but it's kinda uncomfortable otherwise...
Thanks in advance! =D

If by front speaker you mean the earpiece, it doesn't produce enough volume to be clearly audible unless you hold it to your ear.

Strange loud noises comming from speaker

Hello,
I owned Nokia 2730 Classic for a few years...
One night, i was almost asleep when suddenly, a loud noise comming from my phone alert me (the phone was in stand by on my desk). The noise was comming from the speaker, i recon. In background a documentary was playing (consider the difference of the volume between the phone and the PC -> the noise comming from the phone was very loud).
This is an isolated incident; not repeating.
http://youtu.be/8eF56cOviyw
So please tell me if the problem could be related to a hardware issue or not.
Thank you,

So you don't say which year your MacBook Pro is from or the size.
This is from the late 2011 MBP 13"
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Late+2011+Battery+Repla cement/7649
This looks like your machine. So step 5 shows where that battery screw is. It's a triwing and requires a special screwdriver. That tab could have broken if the computer was dropped like straight down. Not too much of a problem.
So the fan:
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Late+2011+Fan+Replaceme nt/7654
When you take the fan out, you'll closely examine the grill at the top of the fan in step 6. It's most likely filled with lint like in a dryer.
So with the fan out examine it carefully. Spin it and see if it makes the noise you're hearing. There's probably something stuck in there. Use compressed air to blow it out. Or if it's bad you might have to replace it.

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

Audigy 4 rear audio comes from front speake

Whenever I caolibrate my speakers they work fine. However, when I go into speaker settings all of the rear right audio comes from the front right and rear left comes from the front left. I'm using the analog outs on my sound card. I've uninstalled the drivers and disabled my onboard sound. I've uninstalled and reinstalled the card, reset the defaults in the console, and updated the drivers. The only peripheral I have hooked up is a Fellowes brand mouse. I checked the outs on the sound card itself and audio only comes out of the front out, the green jack. I've seen that some people have problems with the drivers not working because the sound card is not recognized, but my computer recognizes it as and Audigy 4.

Actually, this is the situation w/ Audigy 2 (6. card) too --> something strange w/ output channel mapping:
Speakers set to 6/6., CMSS OFF, 5.2.8.64 drivers. This PC has only GB or RAM.
With WDM, WDM/KS and Asio4All (uses WDM/KS functionality) drivers, output channels are mapped as:
/2 ==> Front L/R
3/4 ==> Front C/Sub L/R
5/6 ==> Rear L/R
7/8 ==> Front L/R
when expected would be
/2 ==> Front L/R,
3/4 ==> Rear L/R
5/6 ==> Front C/Sub L/R
(7/8 ==> Front L/R) ?
<i>With both Creative ASIO drivers channels are mapped as expected:
Front L/R = Front L/R
Rear L/R = Rear L/R
Front C/Sub L/R = Front C/Sub L/R
</i>
jutapaMessage Edited by jutapa on 08-24-2006 0:43 AM

HT1595 I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

No, you cannot seperate the audio and video stream.
You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
jules

IPod Touch Speaker/Headphone Audio

Sometimes my 2nd generation iPod doesn't play audio through the speaker. I will be listening to a song, a video, or an app without headphones then the audio will randomly stop playing. When I try to adjust the volume, it says there are headphones plugged in. Basically sometimes my iPod says there are headphones plugged in and they aren't.
Has anybody else had this problem? Any feedback is appreciated. Thanks

I'm having a similar issue, but not exactly the same. When I listen with my headphones my volume controls are perfectly fine. If I pull out the headphones and then try to play something with the speakers it shows that I have no volume control on the screen and the side volume button doesn't function- in addition no sound comes out. When I turn off my ipod and turn it back on it suddenly works through the speakers again and I have volume controls on the screen...what's going on? I never had this issue before the new software update. Can anyone please help? Is there a setting somewhere I'm missing? Thanks!

Why is does audio only come out of the left speaker when I press the latency button....?!?!

Hello
I have a small problem which I hope someone can advise me on ......
Everytine I press the Latecny button on Logic 9 the audio will stop coming out of the LEFT and RIGHT speakers and only come out of the LEFT speaker ?
Audio sent out of DAW --------> Mixng Deck ------> back into Soundcard via SPDIF (digital) on inputs 9/10
I am sening al my sounds out of the computer to be summed on a mixing decks and then the 2 channles of audio from the deck is coming back into my soundcard as an digital a signle on INPUTS 9/10.
Can anyone please advise ..........!?!

Might want to read on what Low Latency mode does + why and when you should use it.
It's basically only used in realtime monitorinr when recording and/or when recording softsynths.
By reading the docs you should be able to figure out why the right side is being muted.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=41%26se ction=2%26tasks=true
Be sure software monitoring is Off when recording the summed input.

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

Hello Sabroso007
Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
OS X Mavericks: Set up Bluetooth audio devices
http://support.apple.com/kb/PH14217
Regards,
-Norm G.

After attaching the headset to the audio jack, i get sound from the laptop speaker

after attaching the headset to the audio jack, i get sound from the laptop speaker

This worked for me as well. Great find! I have gigabyte ep45-ud3r motherboard and I was getting all sound through external speakers except itunes was playing the sound out of the digital output instead of the speakers. I could see this when I went to control panel > hardware & sound > manage audio devices. I did the repair as described above and now I have sound in iTunes.

X3200 m2 server tower systemboard speaker or audio (where the beeps come from)

Similar Messages

Maybe you are looking for