X3500 No Connection between LAN and WLAN

Hello,
I've purchased and installed an x3500 modem, and can connect to internet using both wired and wireless but my problem is, i can not ping or see/detect devices between LAN and WLAN.How can i fix this problem?
Mac filtering is disabled on wireless
both gets ip from dhcp

Hi hakanbayar. Can you ping your Linksys device? If yes and you're using a computer, you may need to disable the computer firewall or security so it will allow you to ping other computers.

Similar Messages

Why would i connect a external hardrive to the airport extreme and what is the difference between LAN and WAN gigabit ethernet?

Hey just wanted to know what is the reason i would connect my external hardrive to the extreme and what is the difference between LAN and WAN ehternet. I know one is local and other is wide but can someone explain in simpler terms.

Connecting a hard drive to the Airport Extreme makes it available to be shared across all the computers on your network.
WAN (Wide Area Network) is your connection to the internet
LAN (Local Area Network) is your internal (or local) ethernet connections (computers, printers, etc...)
AirPort Base Station: About the WAN and LAN Ports

Limited connectivity with LAN cable & WLan after Win and IE7 update

Dear all,
It's been now 2 days i'm trying to fix a new bug on my Satellite P100. I don't know if it's linked but yesterday I got the automatic install of IE7 and KB (914440 and 915865).
And since the restart of my computer i can't connect to the network neither through the ethernet cable or the wifi one. The network is present but the computer never gets an IP from my router and the dhcp. I have another computer running fine on this router.
When I use configfree util, and try a repair I have a freeze.
I have now unsinstall IE7 and the two KB, zonealarm. But still no changes, i always get this limiting or not existing connectivity.
Do you have any ideas on what I could test ?
Thanks you very much in advance
Phil

Hi
Hmm. Did you try to reinstall the LAN and WLan drivers???
I found some nice advices in the internet It seems that some MS updates could have a bad influence on some drivers or change the registry entries and therefore some system troubles could appear.
What Lan card did you use?? Intel?? On the Toshiba driver page I found tosh lan driver and intel lan driver so if you use a Intel card you could also check the Intel website for an update..

Communication between : AP and WLAN controller

Hi,
The communication between AP and WLAN Controller is ( Data and Control ) UDP.
Source port 1024 and destination port 12222 and 12223. Actually which device listen to which port or both should listen as control and data can be generated from both the devices.
How does the user ( wireless client) traffic is switched - if user traffic is a TCP traffic. It will be sent to WLANC and then WLANC forwards it to respective VLAN or default gateway ( depending upon the destination in the packet ).
Please explain / share the experience.
any link on cisco.com
Thanka in advance
Subodh

"the LWAPP Control and Data messages are encapsulated in UDP packets that are carried over the IP network. The only requirement is established IP connectivity between the access points and the WLC. The LWAPP tunnel uses the access point's IP address and the WLC's AP Manager interface IP address as endpoints. The AP Manager interface is explained in further detail in the
implementation section. On the access point side, both LWAPP Control and Data messages use an ephemeral port that is derived from a hash of the access point MAC address as the UDP port. On the WLC side, LWAPP Data messages always use UDP port 12222. On the WLC side, LWAPP Control messages always use UDP port 12223.
The mechanics and sequencing of Layer 3 LWAPP are similar to Layer 2 LWAPP except that the packets are carried in UDP packets instead of being encapsulated in Ethernet frames."
Taken from "Cisco 440X Series Wireless LAN Controllers Deployment Guide"

Simultaneous usage of LAN and WLAN

Hi,
I have a T61 running win2k. The WLAN is managed by Intel Proset wireless. I have been having problems running the LAN and WLAN simultaneously. The WLAN connection drops off immediately if my LAN gets connected. I have to disable/disconnect the LAN to make the WLAN work again. I have observed this problem with a few other T61 laptops at my office. Is this a known issue ? What is the resolution ? Thanks.

Mine R61i with Vista can do that, but i can't seem to get it working in dual mode when using XP pro.

Guest LAN and WLAN on Controller

Hi,
While creating new ssid, i can see the option guest lan and wlan, whats the difference? which one is preffered?
Thanks in advance..

Hi,
I remember answering this few days and also George joined the thread.. or max week back..
Guest LAN WLAN =
1> The clients connecting to the WLAN will have a time limit on the connectivity, for example you can configure the Guest WLAN for 24 hours or something which you want..
2> I guess George pointed this in the previous thread.. Can be used for Wired Guest Users configuration as well , here is the link..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008070ba8f.shtml
WLAN =
Just nothing but a SSID with security which doesnt have any time limit.
which one is preffered? =
Its your network and what ever meets your requirements you can use that.. however both of them does its job with different features involved.
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

LAN and WLAN not working

I'm working on a 64 bit HP Pavilion windows 8.1 OS.
The LAN and WLAN are not working properly. At first neither worked. After uninstalling and reinstalling the drivers the LAN worked, until I disconnected and reconnected the cable to the computer. After running sfc /scannow through windows 8 bootable cmd the WLAN would do the same as the LAN. It would connect, but after disconnect it wouldn't work properly. I checked to see if it was pulling an valid ipv4 and technically it is. It is pulling a 63 and not a 169. Although when hardlined it should pull a static ip of 50.115.146.xxx, but it is not.
I have run several Malware scans using Malware Bytes and have not turned up anything. I also did a Spyware scan using adwcleaner. I tried AML registry cleaner and junkware removal tool. I also tried netsh winsock reset and ntsh int ip reset C:\...
This topic first appeared in the Spiceworks Community

Go to Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
There search for your notebook model and install chipset driver, card reader, LAN driver and WLAN driver you can find on Toshiba WLAN portal on http://aps2.toshiba-tro.de/wlan/
If you dont want to tell us which A100 do you have exactly you must search these drivers alone.
Good luck.

Satellite C55T: Win 7 does not recognize LAN and WLan card

I have a problem.
Ive downgraded my Toshiba Satellite C55T-A5222 to Windows 7 64-bit and he didn't install many drivers.
The windows didn't recognize my network connection and he didn't install my wireless driver.
Maybe I need a chipset driver but I didn't find any drivers for windows 7.
Please help me!

If Windows 7 did not recognize the LAN and WLan card, you did not install proper drivers.
Satellite C55T-A5222 is US notebook model.
The drivers can be downloaded from this Toshiba US support page: [Satellite C55T-A5222|http://support.toshiba.com/support/modelHome?freeText=1200005866]
Here choose Drivers /& Updates and the filter by Windows 7 64bit (on the left)
Now you should get all Win 7 64bit drivers for the Satellite C55T-A5222

Bridging LAN and WLAN

I am trying to get VNC working on my computers, but I need to bridge LAN and WLAN. I do not know how to do this. This is the first networking experience I have. Can someone point me in the right direction? I do not even know where to begin. Thank you in advance.

Just go to your network connections, Highlight the two networks, Right click, and Hit "bridge connections" hope this helps.

Just purchased an Airport Extreme , what´s the difference between LAN and WAN

just purchased an Airport Extreme , what´s the difference between LAN and WAN

Check the Setup Guide for the AirPort Extreme to confirm that the WAN port accepts the signal from your modem or from another router on your network.
Other Ethernet devices on your network connect to the LAN <-> ports.

Connection between O and BP is missing

Hi,
When i check inconsistency for a user, i am getting " Connection between "O" and "BP" is missing. When i check the Org.unit in PPOSA_BBP, i could see no BP exists for that Org.unit where user is assigned. I have replicated the org.unit from HR system but yet the BP hasnt been generated. Can you please share your idea on this.
Regards,
Prasath J

Hi Prasath,
This might be because you need to assign the user to a Purchasing Organisation or a Purchasing Group. If the user do not have BP created then you can do this by using tcode USERS_GEN.
Go to USERS_GEN and follow below steps :
1. Select Create User From Existing SU01 user
2. Enter the org id of the POrg or Pgroup under which you want to assign the user
3. Select country and execute
4. In next window one popup will occur, select Area Of User
5. In next popup enter the user id
6. Next select the user and click Ok.
7. This will create a BP and CP for the user and assigns the BP to the Org id of the POrg or Pgroup.
8. Now check the consistency of the user it will show all green.
It might give you error like eMail id for BP XXXXX is missing if the SU01 profile of the user does not contain any user id but it is not critical.
You can open the BP in BP tcode and enter the email id of the user.
Let us know if it solves your issue.
Regards,
Mayur

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

I live in Japan,
I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

Handoff: No connection between iPad and iPhone

Handoff: No connection between iPad and iPhone (IOS 8).

Hi raydela,
I understand your calls aren't being transferred between devices.
Check out the troubleshooting in this article.
Get help using Continuity with iOS 8
If a call doesn't transfer to your other devices, or you don't see the Handoff icons
Make sure that your devices are using iOS 8 or later by going to Settings > General > Software Update.
Check your settings:
Go to Settings > Wi-Fi and turn on Wi-Fi if necessary.
Go to Settings > Bluetooth and turn on Bluetooth if necessary.
Make sure your iOS devices are connected to the same Wi-Fi network by going to Settings > Wi-Fi and comparing the name of the network each is on.
Go to Settings > General > Handoff & Suggested Apps and turn on Handoff.
Go to Settings > Phone and turn off Wi-Fi Calling.
Best Regards,
Nubz

Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

Hi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy

X3500 No Connection between LAN and WLAN

Similar Messages

Maybe you are looking for