X38 ocing not happening fsb problem

Have had lots of help else where re this problem, though with no sucess, so have contacted msi and am awaiting reply.
I change the fsb from 266 to anything 300-440, bios states new cpu value/speed however it dosn't actually change, when i boot into windows it is 266, i can lower the multiplier that stays changed so do all other settings volts etc but fsb always reverts back to 266 no matter what i try fsb volt increase does not help...anyone have any ideas

Which BIOS Version are you currently using?
Is DOT disabled in BIOS?
Quote
when i boot into windows it is 266
Which tool+version are you using to monitor FSB clock speed?
If you change FSB clock speed to, let's say, 280 MHz and save & exit, will the BIOS revert to 266 MHz as well, when you re-enter after start-up?

Similar Messages

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???

Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972

I have purchased two audiobooks from iTunes. They play perfectly for about 13 minutes and then abruptly stop. I have purchased other audiobooks and have not had a problem. Please, any ideas on why this is happening and what can I do to fix it. Thanks!

I have purchased two audiobooks from iTunes. They play perfectly for about 13 minutes and then abruptly stop. I have purchased other audiobooks and have not had a problem. Please, any ideas on why this is happening and what can I do to fix it. Thanks!

As long as you use your computer like King Penguin stated for Report a Problem, you should be fine. If you can't get to your computer, are not using your computer, or your computer is not longer in the mix since you have been using your iPad, email iTunes support about the problem.
http://www.apple.com/emea/support/itunes/contact.html

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

Hey, I've got the same problem. Did you find any help or solution by now?

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.
Just started happening yesterday.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Do you see any prefs related to that knoxnews.com site on the about:config page if you enter that URL in the Filter?
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I get a message when going to any webpage "server not found" or "problem loading page". I click on try again and the page loads fine. This happens on bookmarked pages or manually entered urls. The issues started after I updated Firefox.

Server not found messages and problem loading page message since I updated to the latest version of Firefox. Usually will load the 2nd time after hitting the try again option.
Does not happen with Internet Explorer at all.

See:
*http://kb.mozillazine.org/Error_loading_websites

My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes a lot!

My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes! What should I do!?

Did you try the basics from the manual?
Restart, reset, restore

On shut down I always get the message Program Not Responding. This happened before I installed Firefox. It does not pose a problem, that I know of but it does concern me.

On shut down I always get the message Program Not Responding. This happened before I installed Firefox. It does not pose a problem, that I know of, but it does concern me because I always have to End Program manually when I get this message.
== Over a year ago.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
SeaMonkey

HT3669 This software update keeps popping up almost everyday in my iMac 27 although I keep updating. Looks like the either the update is not happening on my machine or some other problem. Anyone else know of this?

This software update keeps popping up almost everyday in my iMac 27 although I keep updating. Looks like the either the update is not happening on my machine or some other problem. Anyone else know of this? Everytime I check for updates (I have the setting to manual check), an alert pops up in Apple store with the phrase "Lexmark Printer Software Update 2.11" available for download.
Is there a way I can turn off this notification for Printer updates until it is resolved? It is pretty annoying.
Thanks

Not sure this will help yet, having just noticed it myself, but you can now get the Lexmark driver 3.0 for download here: http://support.apple.com/kb/DL1397
I'm going to give that a try to see if I stop getting the constant reminder for 2.11.

Am using firefox 5 and am not able of uploading any file as attachmenet using my Yahoo email account , this problem does not happen with hotmail account or when using IE.

when sending email through yahoo account , i cant upload any attachment with email, a sign of uploading lasts forever without uploading the file.
this issue do not happen with hotmail account or when using IE to browse Yahoo account.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI???

Question
HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??

Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

When right-clicking on a link menu briefly appears then disappears. It still works if you can remember how far down to go to reach the "invisible" options. Anyone else having this problem? Is not happening with IE on same computer.

Recently installed Amazon Uploader and Downloader, and downloaded MP3s from Amazon. My personal computer is connected via Internet to a corporate network; (corporate) SOPHOS and Malwarebytes Pro for virus protection. Recent scans show no infections. I cleared history, cookies, etc. Running Windows 7 and current version of Firefox. Not having problem on IE 8, or with any other apps. Have not installed any other applications, but did install a JAVA update yesterday. Did not help the problem.

Ya actually i did ask here :P And no one offered to help :(
Well i shouldnt say that, all anyone said was to read the java api's.... When all i needed was to learn how to make the link to process input to a database by a servlet.
Anyway thats why i posted this here, in case anyone needs help on the same issue as i did.
And i dont make jsp's by hand.
I currently use for my developing
Dreamweaver mx 2004
Firewords mx 2004
Flash mx 2004
MySql db
JCreator for all the bean and java's
=D
That way there is minimal hand coding for html/jsp pages.

I have added a website as safe for popups.when I select an item it takes me to a page that says I have been logged out. does not happen with other browsers

I have selected my website as safe. While on the site I fill out a form, then when going to the next page to view results, Firefox says I've been logged out. I hit the back button and go back to the form fill in page. It will not take me to the page of results. This does not happen in other browsers.
This also happens with other websites.

Hi,
You can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.
(To revert to the previous profile, close the new profile, start Firefox and choose the '''*.default''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers)).
[https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]

X38 ocing not happening fsb problem

Similar Messages

Maybe you are looking for