X40 BSOD after Windows XP Pro SP3 Update

Any suggestions to recover from this error
inconsistency detected in the pci bus driver's internal structure
stop: 0x000000a1, (0xdead0010, 086fde030, 0x00000000, 0x00000000)
I have spoken to MS and they say it is a driver issue and I have to work w/ Lenovo to resolve
I'm going to try to boot to WinPE and run some of the Lenovo updates to see if this resolves it...
Any help would be appreciated...
Jen

Error code 0x80190194 is the most common error that occurs on windows OS. If the self update virtual directory has been lost or is missing from the default web site then this windows error are displayed.
You solve this update error from the following given steps:
1) Turn-off the any antivirus software program, because if you are update your windows then running program may create problem with us.
2) Remove all recently addition of any software or hardware, because it may create conflict with older program.
3) Restore system, some time it may solve this type of error.
I hope above these steps help you to fix windows update error 0x80190194 on your system. For more information you also visit : http://www.fixwindowsupdateerror0x80190194.com/

Similar Messages

Reader 9 causes BSOD on Windows XP Pro

We have a few systems here that are having real problems with Adobe Reader 9. When the users attempt to open a .pdf file, they get a BSOD, and the system reboots. Once the system comes back up, they are able to open the offending file with no problems.
Here are details of our systems:
Dell Optiplex 755
Windows XP Pro SP3
2GB Ram
32 Bit OS
I have found this occurs most often when opening pdf's that were created with earlier versions.
I'm sure I have left out some vital piece of information, so if you need clarification on something, please ask. Any suggestions would be greatly appreciated!

[While the original post was for Reader 9, I found this same problem with Acrobat 9 Pro, and found a solution.]
Problem: Opening one PDF file is fine, but once you open the second file -- BSOD.
Cause: There is still a problem with Adobe's 2D GPU Acceleration feature.
Per http://kb.adobe.com/selfservice/viewContent.do?externalId=kb405218&sliceId=1, "If acceleration hardware is detected, then optimization is enabled for all files except the first one opened when Acrobat launches." That is why the first file opens OK, but the second causes BSOD. Adobe is either not detecting acceleration hardware correctly, or is not calling it correctly.
Temporary Solution:
1. In Acrobat or Adobe Reader, choose to Edit > Preferences.
2. Go to the Page Display panel.
3. Uncheck Use 2D GPU acceleration.
I tested my machine [Dell Optiplex 755, ATI Radion HD 2400 XT 8.420.0.0, Win XP Pro, Adobe 9 Pro] with "2D GPU acceleration" checked, attempted open of 4 PDFs from File Explorer -->first one opened, then BSOD, rebooted, unchecked "2D GPU", attempted the exact same operation --> all four opened in their windows and now I am happily typing on this page.
This is per http://kb.adobe.com/selfservice/viewContent.do?externalId=324073, which is a post from two years ago and relates to Adobe 8. So, Dell has been fielding calls on this for at least two years. Way to stick in there, Dell. Two years ago, Adobe knew the problem ("You are using an desktop ATI video card with driver version 8.291 or 8.301 and have the Acrobat Page Display Preference 'Use 2D GPU acceleration' enabled." was what they said back then, and recommended updating the video drivers. So, Dell stays with it, Adobe says to update your drivers. Well, I bought an entirely new Dell to get the latest drivers and it didn't help.
Permanent solution:
Adobe needs to get 2D GPU acceleration to really work (how about a line of code where you check whether it is going to work before you execute it?) or ship their product with that feature off by default.

Unable to fully sync with iPod Touch 1G and the (new/lat)est iTunes versions in a very old Windows XP Pro SP3 machine?

Hi.
I keep getting this "The iPod '...' cannot be synced. The disk is locked and cannot be written to." error when I try to sync my 11 GB of music from my very old, updated Windows XP Pro SP3 machine to an old iPod Touch 1G (iOS v3.1.3). It has a brand new (lat/new)est iTunes installations too. I tried rebooting the the machine, disconnecting USB cables, etc. None of them helped. I did not have this problem in the end of 2013.
"Attempting to copy to the disk '...' failed. The device timed out."
"The iPod '...' cannot be synched. An internal device error occurred."
Sometimes Windows XP Pro SP3 thinks my USB connection is not fast? Huh?
No problems when I synched almost 8 GB of music to an iPod Nano 6G from the same machine and USB connector and port. Same collection, and random songs.
I tried again on a borrowed old 15" MacBook Pro (mid-2008) with Mac OS X 10.5.8 and iTunes v10.6.3. Synced from its local HDD to it without any problems.
So, I had an idea. I retried with iTunes v11.1.3.8, that I used end of 2013, in the same Windows XP Pro SP3 machine from scratch. It worked like the end of last year! No errors! Wow! :O
OK, so what changed in iTunes after its v11.1.3.8 to cause this problem?
Thank you in advance.

b noir wrote:
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
I only see mdnsDSP from Apple in my WinSock Provider tabs in AutoRuns v11.70. I do remember I had a low memory error during a very long synchronization, but that only happened once. I doubt that is related to creating a new account especially after I rebooted my very old Windows XP Pro. SP3 machine.

Acrobat 7.0.5 Compatible with Windows XP Pro SP3?

I need to know if Acrobat v7.0.5 is combatible with Windows XP Pro SP3.
Thank you.

I don't know, but you may go to the download page and click the individual links to read the notes for that link
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
BTW - There are several updates after 7.0.5 which you should install, and NOTE that the latest, 7.1.0 is at the bottom of the 7x section

Adobe Reader v8.1.2 Compatible with Windows XP Pro SP3

I need to know if Adobe Reader v8.1.2 is compatible with Windows XP Pro SP3.
Thank you.

I've been using Reader without any problems until yesterday when administrator installed Windows XP SP3. When I do a <Ctrl-P> to print, it takes about 30 to 90 seconds for the print requester to pop up. The program is locked up and not responding during the delay, although it does NOT say "Not Responding" in the title bar. While the delay is going, the SysInternals Process Explorer shows but fleeting milliseconds of Kernel or User time being used. Setting the priority from 8 to 13 made no improvement at all. I frequently print from the Reader and the delay drives me nuts! This hang-up needs to be corrected ASAP. I am sure it is a Reader incompatibility because it never happened before the SP3 update, the program is hung and doing nothing and everything works perfectly before and after the <Ctrl-P> is entered. Word or Excel do not experience similar problems. I just tried Notepad, and it sometimes hangs the same way but not nearly as long - maybe 10 seconds at the most and only the first time. After the first delay it pops right up. Adobe Reader hangs a long time every time. Any idea if Adobe is going to fix it or even knows the problem exists? Do they moderate or monitor complaints like this here or elsewhere? I don't want to think they know about it and are fixing it if they aren't.

MiniSAP under windows XP pro sp3

Hi all
I have installed a NSP minisap on a virtual PC (Windows XP Pro SP3) but each time I start the Sap server after one minute (server is yellow status) I have a Windows Error generated my the process msg_server....
I checked every prerequisites, and It should work.
Thanks for your help
Jerome

I know.... The user used was not with the right authorization on windows, then the register wasn't correctly updated by SAP installation (and no error message for this stuff )
Thanks for your help !

Anti-virus software on Windows XP pro sp3 with Virtual PC

Hi,
I'm running Virtual PC 7.0.3 with Windows XP pro Sp3 on eMac. Has anyone found the need to run a anti-virus software etc as part of the Windows system? Or will the firewall on the broadband router modem be sufficient protection?
Many thanks.

Thanks for the reply.
Any recommendations on AV software?
I tried installing a free version of AVG AV but the install would not complete, I ended the process after 1.5 hours.

I can't install ANY AIR-based App in Windows XP Pro SP3

Here is the problem: I have AIR 1.5.1.8210, but any AIR apps can't be installed and when I try it the OS crashes and I have my computer restarted. It's very weird 'cause it's heppen only with AIR apps.
Yes, this is my last resource to find an answer to it.
Yes, I've done my homework and yes, I've done some research (and still doing it)
Yes, I'm using my administrator account logged on with password (so, I think, apps has no problem to install)
Yes, I tried install it with another user account I thought the app will ask the admin password (just like in Linux OS, when the app on installation ask you about the root password). Even though, no success. Of course, it's something expected 'cause the user hasn't admin permissions. But I give a shot.
Yes, I've already installed/installed about 5 times AIR runtime and the AIR apps (even manually) and no success...at all!
Yes, I used at least 4 apps to system/registry/file cleaning (CCleaner, Glary Utilities, Advanced System Care and MVRegClean)...too many of them, but only to be sure of the complete cleaning.
Here in the forum another person, but on Vista, found almost the same problem as I, here's the link: http://forums.adobe.com/thread/199842?tstart=30
And another buddy ask about admin rights to install AIR apps, here's the link: http://forums.adobe.com/thread/415756?tstart=30
And, I found two others infos in Adobe site per se about any troubleshooting on AIR: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403150&sliceId=1 and log actions during installation: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403123&sliceId=1.
2+2 = 4. So, I done/undone all the steps in the last two links (I installed/unistalled the AIR runtime and AIR apps 5 times, remember?) Usually, I can handle my own problems in computer, but this one I can't figure it out.
After all of this here's my system specifications: AMD Athlon 64 X2 Dual Core 3600+ (2.01Ghz), Windows XP Pro SP3 (32bits), Nvidia GeForce 7100 (512 Mb), 1.5 Gb RAM. Web browser: Mozilla Firefox 3.0.8 with TwitterFox.
So, could anyone help? I know, I know to mucj information, burt it was to facilitate the conversation, believe me.
Kisses, Cat777.

Well, well, well, right before somenone could answer me. I found the answer just here in the forum. I really love it!!!
Seems to be a incompatibility with the file created on Folder Lock installation: "windrvnt.sys." In this case, it is just uninstall Folder Lock and tah dah! Everything works perfectly.
Here comes my request: Hey, developers you all could give a try in resolve this issue, huh? At least give a try...It'll be very nice have the two programs properly installed in anybody's (who wants it) system.
Thanks, anyway for this space to research, change some infos even undirectly. If it was not this forum and all the debate in here maybe I'll be in the dark search for the resolution of it.
Thanks.

Adobe Reader X wont open in Windows XP Pro Sp3

I have uninstalled every adobe product on my PC which is running Windows XP Pro SP3, then downloaded Adobe Reader X again and reinstalled it.
Adobe reader X simply wont open - generates the "Adobe Reader has encountered a problem and needs to close. We are sorry for the inconvenience" message.

Announcement: Would you like to help us improve Adobe Reader?
Hi All,
We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available athttps://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
We look forward to your active participation, feedback and help towards making Reader a better product.
Thanks and regards,
Adobe Prerelease Team

Can I get Cisco Jabber 10.6.0 to work on Windows XP Pro SP3?

We are implementing the new Cisco Jabber 10.6.0, per a requirement, but we still have some Windows XP Pro SP3 users. The issue is that with this new client the app will not load due to error: CiscoJabber.exe Entry Point Not Found: the procedure entry point inet_ntop could not be located in the dynamic link library ws2_32.dll.
I understand Windows XP is "not supported", but since we are forced to upgrade to this version I was hoping for a work around for our Windows XP users until they can upgrade to Windows 7.
Anyone have a solution?
Thanks for your time.

Thank you for the suggestion. Here is what I did:
Uninstalled 10.6
Removed all folders and file traces of the install
Tried to install 9.6 - got hung up during install so had to reboot
Tried right-click on exe / uninstall and got message it was only used if installed, so it never really installed even thou I had a broken link to jabber on the desktop
Tried install again. Second attempt was same thing. It gets hung on the windows installer - preparing to install... had to reboot again
Right-click exe / repair and got message it was only used if installed
Removed all folders and file traces of the install
Redownloaded the exe
Same issue, will not install. Hang right after registering product completes.
So i'll be looking into why this is not installing now. :)

IMac 24inch - Boot Camp and Windows XP Pro SP3 - ZERO Audio

I've just used Boot Camp to install a fresh copy of Windows XP Pro SP3 onto my 24-inch, 2.4 gHz iMac.
Everything seems OK, except there is ZERO audio.
I've tried reinstalling drivers from RealTek, to no avail. I've downloaded RealTek's latest drivers (number 217) and they appear to install, but nothing works.
My Device Manager does not show any sort of Audio card whatsoever. Have I got some sort of hardware problem? (Audio works without trouble in OS X.) Why can't Windows find my Audio Card at all?

I also have the same problem. I installed the Bootcamp update for XP and then my audio does not work with XP anymore. It does work with Leopard still without a problem. I noticed that when I am in windows, and I turn the audio off of mute, there is a red light that illuminates from the Audio Jack. The Audio driver does show up on my control panel, but nothing is working. Is this a way to make us stop using windows?

Windows 7 PRO GP update error

Windows 7 PRO GP update error
We have a very peculiar problem
We have a Primary DC & Secondary DC installed in all our office ( Windows 2008R2). The Domain name is abc.com for all the Offices and the replication between the DC's happen in between the office happen without a problem.
The clients in each of the offices gets authenticated from the DC in the respective office.
But for a group policy update it gives an error as below
"Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file
\\<FQDN>\sysvol\<FQDN>\Policies\{BD732AAF-016F-11D2-945F-00C04Fb984F9}\gpt.inifrom a domain controller and was not successful. Group Policy settings may not be applied until this event is
resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The error happens only on some clients.
We are able to Ping, connect to the local DC and the client gets the IP from the local DC and also gets authenticated by the local DC for log on.
On the PC which gives an error if we try to ping domain name - abc.com it returns the ip of the DC in a another office and not the local DC.
Request to suggest a solution / tips to identify the problem

Thanks for your reply
Please find the IPConfig Details as requested
Windows IP Configuration of CLIENT with Problem
 Host Name . . . . . . . . . . . . : NP
 Primary Dns Suffix . . . . . . . : ALT.COM
 Node Type . . . . . . . . . . . . : Hybrid
 IP Routing Enabled. . . . . . . . : No
 WINS Proxy Enabled. . . . . . . . : No
 DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection 2:
 Connection-specific DNS Suffix . : ALT.COM
 Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
 Physical Address. . . . . . . . . : 00-19-99-F2-5B-BC
 DHCP Enabled. . . . . . . . . . . : Yes
 Autoconfiguration Enabled . . . . : Yes
 Link-local IPv6 Address . . . . . : fe80::bc5c:5976:37b2:d42a%14(Preferred)
 IPv4 Address. . . . . . . . . . . : 10.102.22.72(Preferred)
 Subnet Mask . . . . . . . . . . . : 255.255.255.0
 Lease Obtained. . . . . . . . . . : Tuesday, July 08, 2014 8:02:23 AM
 Lease Expires . . . . . . . . . . : Wednesday, July 09, 2014 8:02:23 AM
 Default Gateway . . . . . . . . . : 10.102.22.1
 DHCP Server . . . . . . . . . . . : 10.102.10.10
 DHCPv6 IAID . . . . . . . . . . . : 318773657
 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-FE-B8-99-00-19-99-F2-5B-BC
 DNS Servers . . . . . . . . . . . : 10.102.10.10 10.102.10.11
 Primary WINS Server . . . . . . . : 10.102.10.10
 NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
 Media State . . . . . . . . . . . : Media disconnected
 Connection-specific DNS Suffix . :
 Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
 DHCP Enabled. . . . . . . . . . . : No
 Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.ALT.COM:
 Media State . . . . . . . . . . . : Media disconnected
 Connection-specific DNS Suffix . : ALT.COM
 Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
 DHCP Enabled. . . . . . . . . . . : No
 Autoconfiguration Enabled . . . . : Yes
===========================================
Windows IP Configuration on DC
 Host Name . . . . . . . . . . . . : ALTHODC03
 Primary Dns Suffix . . . . . . . : ALT.COM
 Node Type . . . . . . . . . . . . : Hybrid
 IP Routing Enabled. . . . . . . . : No
 WINS Proxy Enabled. . . . . . . . : No
 DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection:
 Connection-specific DNS Suffix . :
 Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network C
on
 Physical Address. . . . . . . . . : 00-19-99-7E-7F-62
 DHCP Enabled. . . . . . . . . . . : No
 Autoconfiguration Enabled . . . . : Yes
 IPv4 Address. . . . . . . . . . . : 10.102.10.10(Preferred)
 Subnet Mask . . . . . . . . . . . : 255.255.255.224
 Default Gateway . . . . . . . . . : 10.102.10.1
 DNS Servers . . . . . . . . . . . : 10.100.10.10
 10.102.10.11
 127.0.0.1
 NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{4353BDBD-759C-45E1-A523-621CC16121AA}:
 Media State . . . . . . . . . . . : Media disconnected
 Connection-specific DNS Suffix . :
 Description . . . . . . . . . . . : Microsoft ISATAP Adapter
 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
 DHCP Enabled. . . . . . . . . . . : No
 Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
 Media State . . . . . . . . . . . : Media disconnected
 Connection-specific DNS Suffix . :
 Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
 DHCP Enabled. . . . . . . . . . . : No
 Autoconfiguration Enabled . . . . : Yes
=======================================================
We do not use Sysprep and also we normally do not use imaging
Domain Time is in Sync with DC & Client

Migrating application from Windows 2000 to Windows XP Pro SP3

I just got a new computer with Windows XP Pro SP3 installed and need an application that was installed on my old, really old, computer running Windows 2000. The application was developed by a third party in 1997 and uses Oracle as the database engine. It uses Developer 2000 for the interface. Our IT person, who is lightyears ahead of anyone I've ever known when it comes to hardware and software, could not get the application to run on my new computer. We get error FRM-40039 when we try to open the application. Any suggestions would be appreciated. I use this application intermittantly all day and right now the "solution" is for me to go to my old computer to use it. This would be like an editor trying to use a dictionary located in another room from which it could not be removed (and could not consult the internet).

FRM-40039 is a Forms error, and Forms doesnt use ODBC. You'll probably get better help posting in the forum appropriate for that product. Unfortunately I'm not sure exactly what the forum is :(
Greg

Problem installing NW2004s ABAP Trial version on windows xp pro SP3

Good Day.
I have drawbacks installing Abap Trial SP12. When it comes to 89% ends abruptly.
I set up MS Loopback Adapter. The operating system is Windows XP Professional SP3. 1Gb RAM. Disk Space 50Gb Free.
I have installed thousand and once and presents the same mistake. I have followed the procedure to uninstall the MaxDB, Stop service SAP, Clear Folders installed and clean record with RegCleanTool. And nothing, I am grateful for the help they can give me.
Thank you.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllInstallationSteps(StepWrappe rInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.install(StepWrapperInstallFiles.java:2 68)
at com.installshield.product.service.product.PureJava ProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.getResultForProd uctAction(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(May 27, 2008 7:18:44 PM), Install, com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:18:44 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllUninstallationSteps(StepWrap perInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.uninstall(StepWrapperInstallFiles.java :313)
at com.installshield.product.service.product.PureJava ProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.processActionsFa iled(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Problem solved.
I had installed.
- Windows XP Pro SP3
- Java Runtime 1.6
The uninstall and install the following.
- Windows XP Pro SP2
- Java Runtime 1.5
Thanks.

Airport Extreme and connecting through ethernet port to Windows XP Pro SP3

I have today had the sad experience to loose network connection to My Windows XP Pro SP3 using the ethernet port on Airport Extreme Base station, the newest one.
It seems it won't pass an IP address for XP using DHCP, and to make things worse My wireless access using My is working okay!!!
Why do I only have this problem through ethernet ports on the Airport Extreme Base Station for XP, but wireless connectivity for My Mac's works????
If others have similar problems and have found a solution please let Me know.
Yes, I have twice today contacted My ISP provider but as the Mac's can connect the problem seems to lie with the Airport Extreme Base Station.
I will check this forum tomorrow and hopefully a response has been given to solve My problem
Kind regards
Engineer
Preben Duus
Denmark, Europe

You can access the AirPort Disk via normal file-sharing connection options, such as selecting the server from any Finder window’s sidebar in the Shared section. AirPort Disk uses two standard methods: AFP (for Macs) and Samba (for Windows or Linux).
Leopard accesses AirPort Disks through the Finder, just like any other network volume. Open any Finder window, and look in the sidebar for a list of servers in the Shared section. You should find your AEBSn.
To mount an AirPort Disk volume, follow these steps:
1. Select the AEBSn in the Sharing section of the sidebar.
2. To connect as a Guest user, you need take no more steps; To use a named account, click the Connect As button in the upper right and enter your credentials.
3. Double click a volume that’s shown to mount it on your system.
For both Windows XP and Vista, open the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser.

X40 BSOD after Windows XP Pro SP3 Update

Similar Messages

Maybe you are looking for