X4000b Bluetooth Mouse constantly looses connection

Hello there
My new Bluetooth Mouse constantly looses connection to my Asus Transformer Windows TabletPC. So the mouse Pointer stops moving and can be moved again after 20 seconds or so. Any suggestions on how to solve this?

Try resetting the PRAM and SMC.
Barry

Similar Messages

Windows 8.1 and Apple Bluetooth Mouse and Keyboard connection

I recently upgraded to Windows 8.1 from Windows 8.0 Home and as a result I'm experiencing the following problems:
Apple Bluetooth Mouse - randomly dis/connects or freezes where I cannot move the mouse or it's very jerky or very slow.
Apple Bluetooth Keyboard - the keys will stick or freeze causing the redundent key presses (eg. yyyyyyyyeeeeeee).
I've done the following to fix the problem with no success:
Reinstall Boot Camp 5.0.5033 drivers
Reinstalled Bluetooth drivers from Boot Camp 5.0.533 individually
Unistalled both devices on OS X and reinstall them only on Windows 8.1
Reinstalling both on OS X and reinstalling them on Windows 8.1
Uninstalling all the drivers from the Device Manager and reinstalling them
One thing I have noticed is that under Devices and Printers I have two new devices (HID-compliant mouse and HID Keyboard Device) that were not there under Windows 8.0 in addition to my bluetooth devices. I have tried removing the new devices but they keep reinstalling themselves.
I have USB mouse that's connected and I've been able to use that without problems so I think there's a problem with the Apple driver or the Windows 8.1 bluetooth drivers.
Has anyone fixed this?
Thanks!

Just to point out the "Bluetooth Collaboration" setting I've found this:
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.
And it is not enabled by default on some devices like on mine!
http://chasms.com/wireless_utilities/broadcom/props.htm#toc_51

Targus bluetooth mouse will not connect in bootcamp

I have a Targus blueetooth mouse that will not connect in bootcamp. It has worked fine for a long time in XP and 7. Then I upgraded the haddrive and had to do a lean install of Windows 7 and the Apple bootcamp 5. Now it will not connect at all. I have the "Apple Broadcom Built-in Bluetooth" seleted , it sees the mouse but it tries to connect and just stalls. This is very frustrating since without the mouse it is nearly impossible to troubleshoot Windows.

Bluetooth mouse will not connect my wireless mouse...
what works +every time+ for me :
use your fingers to move the cursor up to the bluetooth icon (top right of display)
click bluetooth icon, select user mouse / connect
then quickly move the cursor up (with fingers) so it touches or is very close to the bluetooth icon
and start clicking with your mouse (making sure the mouse is on obviously).
I have NO idea why but this works on my MacBookPro everytime. If I try to connect without moving the cursor near the BT icon it won't connect (or takes at least 10 trys).

TS3048 Wireless Keyboard constantly looses connection

My Apple Wireless Keyboard (Part Number: MC184LL/B) constantly looses connection (as often as once/minute; but sometimes it will stay connected for up to 20-30 minutes before cutting out).
Details
>It is 2' from my Macbook Pro.
>There's a Drobo next to the computer, but the cut-out happens whether Drobo is on or off.
>Battery indicator says keyboard is 100%.
>Thunderbolt Display in vicinity.
>Happens at multiple locations within my house.
>Error message is "connection lost"
Suggestions?

ACTUALLY: Problem is NOT FIXED.
Making the keyboard a FAVORITE helped--the connection goes down less often, but it still cuts-out, sometimes regularly. What else can I try?
Here's an RSSI readout, if that's of any use:

Bluetooth Mouse can not connect...

Hi All, I am aware this is an issue however can not figure out how to resolve it. I have a 2007 macbook 2.16 dual core I'm using a bluetooth mouse which works perfectly with Mac OSX Lion. However when I switch to Bootcamp running Windows 7 64 bit, the mouse can not connect. The computer will find the mouse but when I click on the mouse icon in the bluetooth setup to continue installation the circle spins and spins and says connecting to device and nothing happens. The mouse works and bluetooth works, but not in bootcamp. I am tech savy so hit me with your best shot. Thank you!!

Vnahaze2000, I still haven't figured out the problem. Try this website, it's from apple. There are drivers you can install which will hopefully alleviate your problem. I downloaded every driver and unfortunatelly no luck. But maybe it will help you. http://support.apple.com/downloads/#macoscomponents Good luck!!

Targus comfort bluetooth mouse won't connect

Hi,
just bought Targus bluetooth mouse:
http://www.targus.com/us/productdetail.aspx?sku=AMB09US
However, my computer is not able to recognize it. When I try to connect it to the different computers, it works without problems so the problem must be on the side of my pc.
I own Lenovo Ideapad Yoga 13.
Any advice will be highly appreciated,
Thank you,
Jacob

hi Fredecumber,
Welcome to the Lenovo Community.
Can you try to follow this article on how to pair a bluetooth device on Windows 8.
Also, when you try to pair the Targus bluetooth mouse to your Ideapad Yoga 13, do you get any error messages? Does it even see the mouse on the bluetooth device list?
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Bluetooth mouse cannot keep connection

My Bluetooth mouse cannot maintain a connection to my MacBookPro (running 10.10.2). This just started a couple of days ago. I have two different BT mice (with fresh batteries) and my MBP cannot keep a connection with either one. Is there a bug in the last Yosemite update?

You are right - the router shouldn’t affect it but...Process of elimination
PRAM reset:
SMC reset
Unplug power to the USB hub and disconnect form computer - if your wireless mouse now works you can narrow it down farther. BTW my wife simply moved her hub and HD behind the computer to solve her problem. I needed the cable.
I doubt the router has anything to do with it but you can always temporarily take it down (unplug the power) and see.

3rd party bluetooth mouse can't connect Lion

Hi there,
There is a problem I found in Mac OS X Lion, I found that the 3rd party bluetooth mouse that couldn't be connect to those computer that installed Mac OS X Lion, beside that, I also got connect and use normally with my bluetooth mouse when I using Snow Leopard, and also I get test with some computer running Snow Leopard that I have, its running good. But not in Lion.
I tried to reset nvram or reset the bluetooth setting on my Mac Book Air, also not working, and I tried my bluetooth mouse connect to HK Apple Store's demo iMac, also not working, but it just working at my brothers iMac that running Snow Leopard!
Could I have any advice about this?
Thank you!

On the Mac with Lion installed, the Bluetooth preferences may be corrupted.
Go to /LIbary/Preferences
Move the com.apple.Bluetooth.plist file to the Trash.
Restart your Mac.
Make sure the batteries in the mouse are fresh.
Now open System Preferences > Bluetooth
Make sure On and Discoverable are selected.
Click: Set Up New Device ...
See if that works.

Bluetooth mouse does not connect

Surface Pro 2; Win 8.1
Built-in Bluetooth
I am attempting to connect a Bluetooth mouse to the surface when working at my desk. I have Bluetooth turn on and it keeps scrolling ... searching.
I have 2 Bluetooth mice that I am trying to get to connect:
1. Verbatim model 96991 (no transceiver)
2. Microsoft wireless mobile 3500 (with transceiver). I loaded Microsoft Mouse & Keyboard center. When run, cannot find device. I did not connect the transceiver because I want the internal stack to work.
I wish to use internal surface Bluetooth stack.
What do I do to get MS mouse working on surface 2 Pro win 8.1 with internal Bluetooth stack (no transceiver)
John Lenz

MS Bluetooth mouse (w/USB) will not connect natively to Surface2 PRO.
Another Bluetooth mouse (no USB) does but does not sustain connection. I'll use this one.
John Lenz

Bluetooth mouse does not connect after hibernate

Mouse cklick 406S connecting with my macbook pro 15' OS Lion 10.7.2 (second half of 2011).
After 5 minutes motionless mouse not connected.
Also, if laptop reboot, it not connected too. I'm read most of the posts from this site, but have not found a solution.
I need help. Thanks in advance.

Hello!
My preferences http://grrrab.it/er612u and advanced http://grrrab.it/m981gp

X4000b bluetooth mouse

Using a Linux box, Fedora 20.
The mouse connected easily first time setup.
A new laptop in the house, Windows, again the device paired and worked well.
Take the device back to the Linux box and it resuses to connect.
Removed batteries, left for ten minutes. Still wouldn't connect.
It shows as paired, yet won't connect.
How to 'reset' it please? Anyone

I am trying to use a HP x4000b on a HP G72 Laptop and have the same problems. After I bought it I found out that my laptop doesn't support Bluetooth, so I had to buy a USB Dongle. I got it to work a few times, but as soon as I shut down it wouldn't reconnect. When I go through all the suggestions it says everything is working fine, but it's not. I sure hope we get an answer from someone who knows what's going on.

Bluetooth mouse is not connected after reboot or bluez restart

I followed all possible guides to make my Apple MagicMouse. I saw on the forums that the key is to mark it as "trusted". I did it in bluetoothctl and put it to "trusts" file in /var/lib/bluetooth/xx:xx..../.
It works fine if I connect it manually but after restart I see only messages like this in bluetoothctl:
[NEW] Device 84:38:35:24:08:D9 MagicMouse
[CHG] Device 84:38:35:24:08:D9 Class: 0x002580
[CHG] Device 84:38:35:24:08:D9 Icon: input-mouse
[CHG] Device 84:38:35:24:08:D9 Connected: yes
[CHG] Device 84:38:35:24:08:D9 Connected: no
[ DEL] Device 84:38:35:24:08:D9 MagicMouse
[NEW] Device 84:38:35:24:08:D9 MagicMouse
[CHG] Device 84:38:35:24:08:D9 Class: 0x002580
[CHG] Device 84:38:35:24:08:D9 Icon: input-mouse
[CHG] Device 84:38:35:24:08:D9 Connected: yes
[CHG] Device 84:38:35:24:08:D9 Connected: no
[ DEL] Device 84:38:35:24:08:D9 MagicMouse
Messages are printed when I click a mouse button. There is a small delay between "Connected: yes" and "Connected: no" and during this time I see a bluetooth sign in the notification area (I have Gnome).
Sometimes I see a paring request from the mouse. Sometimes authorisation request and if I go to the bluetooth settings it even propose to type a PIN code on the mouse )
Regardless my action after restart of bluez I am at the starting point.

I mentioned that, because this "solution" used to work for me on previous similar problems. After these steps the mouse used to autoconnect again after reboots and wakeups. Then after some weeks the problem appeared again.
Now this also doesnt work anymore. Now, everytime the mouse is disconnected, I have to push connect-button on the mouse and then manually initiate the connect process from the notebook (KDE: bluetooth applet -> Mouse -> Connect). It is not enough to just turn on the mouse.

HP X4000b Bluetooth Mouse (H3T50AA) stops working if not moved for a while, then computer crashes

I will be very happy if someone answers this, 'cos from all the other related posts, my outlook is pretty bleak. At least give me the thumbs up for trying, or a little human contact. Proof this post existed.
Alright, I (fairly) recently updated to windows 8.1on my Samsung quad-core notebook - Model is NP905S3G
For the full info- see the picture.
Anyway, the problem is, that ever since I installed Windows 8.1, if I don't move the mouse for around 1minute when it is on (i.e. I just leave it still for 1 min because I'm typing stuff), it stops working. Moving the mouse simply doesn't do anything. If I look on the 'devices' screen, it is still shown as connected, and I can try re-connecting it, but it doesn't work. Turning on and off doesn't work. Pressing that little blue 'connect' button doesn't seem to do anything normally, and in this case, does nothing. Un-installing and re-installing the mouse does not permanently solve the problem (but does restore connectivity, at least until I leave the mouse idle for too long again)
Currently, once the mouse has stopped moving on the screen, I press the power button (which for me makes my computer sleep). When I do this 1 of 2 things happen; either it goes to sleep as instructed, or it stays on indefinitely, and I have to hold the power button for 5 seconds to do an emergency shut-down. This is a pain, especially since nothing is saved, and the computer takes extra-long to turn on the next time.
The real problem is this: about five minutes after the mouse becomes unresponsive, the computer crashes. It is during this five minute period that I can save all my stuff, but if I have been typing non-stop, I may not even notice that the mouse has stopped moving, and so the computer often crashes at unpredictable times. This of course is a major annoyance, and what’s more, sometimes just when I click a link my mouse freezes, and I have to restart my computer or let it crash.
The crash message is DRIVER_POWER_STATE_FAILURE, and comes on a blue screen with a message saying the computer is collecting some error info, and a silly little smiley face. I have come to hate that smiley face.
If you’ve read this far, thank you very much, PLEASE FIND A SOLUTION, MY MOUSE IS PRETTY UNUSABLE AT THE MOMENT
PS. When I feel it is too risky to use a mouse, I use the touchpad. The setting where tapping=clicking really annoys me, and I also don’t like the inverted scrolling. I change these settings on my preferences, but for some reason they are never saved once I turn my computer on. They used to be saved before updating from Windows 8 to 8.1. Any suggestions?

Not actually solved. The problem still happens and isn't limited to me or my headset.
I just want this question out of my sidebar and this is the only way to do that!

Mighty mouse keeps loosing connection

so iv had my mighty mouse for over a year and its been used with numerous laptops. i bought a wireless keyboard there a few months ago. i mainly use my mbp as a desktop. yesterday i decided to lug in a 19" dell external monitor. since i plugged that in the mouse was slow and every minute or two (literally) it would come up with the lost connection image. The keyboard works fine. Actually now that i think bout it while i was using the monitor for maybe the first few hours this didn't occur. I did a search of the forums and didn't find much except the relation to the monitor. i unplugged it and the issue has stopped. i tried a different monitor and it also happened. Any ideas anyone?
ok just there 2 minutes after i posted with no monitor plugged in it did it again...
Regards
Message was edited by: alex.lyons

anyone

Mouse keeps loosing connection

Happened once or twice and I ignored it but it happens 3 or 4 times a day now

One makes the device a favorite by going to system preferences>bluetooth. Highlight the device. If details are not displayed, click on the little gear and "show more info." Click on the gear again and make the device a favorite.
Barry

X4000b Bluetooth Mouse constantly looses connection

Similar Messages

Maybe you are looking for