X4150 CPU Error

Hello All!
I have brand new SunFire X4150 Server and when i powerup the system i get this message:
"Error (0160) Processor missing microcode"
"Error (0161) Processor missing microcode"
"Error (0162) Processor missing microcode"
"Error (0163) Processor missing microcode"
Press F1 to continue, F2 Enter to setup
When i press F1 the system work fine, even when i run PC-Check everything is normal.
I tried to upgrade the bios and still i have the same message.
I have to mention, when i enter to bios settings under the CPU i have this message:
"Stepping: unsupported processor"
Can anyone help me with this strange error?
Best Regards
RgGolbraich

I got the same error when I tried to use the shipped v1.0 x4150 tools and drivers cd. I selected option 3 (advanced), which was to update the system and keep configs. The BIOS looked bare and didn't have any of the default serials numbers entered.
I was able to fix the problem by downloading the v1.1 iso and applying that update with option 2 (default) instead of 3. The BIOS showed serial numbers and booted up correctly.
[http://www.sun.com/servers/x64/x4150/downloads.jsp|http://www.sun.com/servers/x64/x4150/downloads.jsp]

Similar Messages

Pro Tools CPU Error Message

I'm running Pro Tools on a store-bought iMac G5 with a CPU speed of 1.8GHz and I am getting an error message that is stopping me from recording multiple tracks. Or, at times, after I've recorded a number of tracks, I've been rudely halted by the CPU Error message at a time when I am trying to burn a CD on iTunes. Anybody have any ideas how to get my CPU to devote all its power to Pro Tools or how else I can get by this nasty problem?

Best thing to do is to go to duc.digidesign.com and describe (in detail) exactly what you're using (ProTools hardware, software, OS version) and exactly what the error messages are.

KT2 Combo D-Link Indicated CPU Error

I'm having problems with a new KT2 Combo-L board.
The board powers up (CPU fan spins), but I get no POST, no beeps, no video. The D-Link LEDs indicate a CPU error.
The only items on the board are:
-128 MB PC133 RAM Stick (tried 2 diff sticks)
-An old 16MB 3DForce AGP card (which I know works)
--I've previously tried 3 different AGP cards
Both the board and CPU (AMD Athlon XP) are newly purchased.

You sent me a mail and this is my answer, i hope it helps
Disconect the Main power cable,power must be off
Reset the bios of the board , Jumper JBAT1. Instructions found in the
Manual Page 2-24
Be shure that there no short-circuit with the mounting screws of the
case or any other screws from the case on the back of the board.
Best, take the Board out of the case and put in flat on a table, put
it on paper or cork, be carefull of electrostatic power.
Put only one RAM into the slot
put Only the graficcard in the board , nothing else
If you have a D-Braket (page 1-8) connect it to the board and have a look what the Lamps want say to you.
If Power is good, I Think now there are only 3 possibilites
1. CPU defective, test it on another Mainboard
or
2. RAM defective or wrong type, test it on another Mainboard
or
3. Graficcard defective, test it on another Mainboard

CPU error

Dear All,
Please find the below errors and may i know why these errors are appearing.
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 752036 kern.info] NOTICE: [AFT0] L3_WDC Event detected by CPU533 at TL=0, errID 0x001b31a5.6bb93ef0
Mar 5 13:59:30 kapttdw1 AFSR 0x00000000.00000160 AFSR_EXT 0x00000002<L3_WDC> AFAR 0x00000000.8a98a010
Mar 5 13:59:30 kapttdw1 Fault_PC 0x10e5e1c Esynd 0x0160 /N0/SB5/P1/E1 J5300
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 742202 kern.info] [AFT0] errID 0x001b31a5.6bb93ef0 Data Bit 86 was in error and corrected
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 297012 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 E$tag PA=0x00000000.fd98a000 does not match AFAR=0x00000000.8a98a000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 367857 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 PA=0x00000000.fd98a000
Mar 5 13:59:30 kapttdw1 E$tag 0x00000001.fb002d8b E$state_0 Owner
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x000004bb.c5362078 ECC 0x1b0
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x000004bb.c53620c0 0x01000000.baddcafe ECC 0x112
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000300.000a4008 0x000004f8.8dea08c0 ECC 0x009
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.010fe060 0x00000000.010fe060 ECC 0x02d
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 297012 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 E$tag PA=0x00000000.0418a000 does not match AFAR=0x00000000.8a98a000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 367857 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 PA=0x00000000.0418a000
Mar 5 13:59:30 kapttdw1 E$tag 0x00000000.08002d89 E$state_0 Shared
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.001c00c5 0x80000000.670007b6 ECC 0x00b
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.001c00c5 0x81000000.670027b6 ECC 0x0c1
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.001c00c5 0x82000000.670047b6 ECC 0x19a
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.001c00c5 0x83000000.670067b6 ECC 0x150
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 297012 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 E$tag PA=0x00000003.2218a000 does not match AFAR=0x00000000.8a98a000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 367857 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 PA=0x00000003.2218a000
Mar 5 13:59:30 kapttdw1 E$tag 0x00000006.44002d8b E$state_0 Owner
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 297012 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 E$tag PA=0x00000041.6018a000 does not match AFAR=0x00000000.8a98a000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 367857 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 PA=0x00000041.6018a000
Mar 5 13:59:30 kapttdw1 E$tag 0x00000082.c0002d8a E$state_0 Exclusive
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x06020000.36401b5b 0x40c58ff4.00040104 ECC 0x058
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x98790000.01000000 0x0004534d.40c58ff4 ECC 0x18e
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00040000.00023200 0x3640188b.00020024 ECC 0x187
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x006c5147.00809c3d 0x53eb2300.a0000004 ECC 0x15c
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 564584 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 L2$tag PA=0x00000042.46f8a000 does not match AFAR=0x00000000.8a98a000
Mar 5 13:59:30 kapttdw1 SUNW,UltraSPARC-IV+: [ID 902801 kern.info] [AFT2] errID 0x001b31a5.6bb93ef0 PA=0x00000042.46f8a000
Mar 5 13:59:30 kapttdw1 L2$tag 0x00000042.46f812a2 L2$state Exclusive

That excerpt is actually too brief to make anything but a guess.
It's some sort of ecache data parity problem, reported by cpu core #533.
It's probably an issue in the following ecache RAM:
/N0/SB5/P1/E1 J5300With that many processor cores, the system is expensive enough to likely be covered by a service contract.
Open a support case. Be expected to gather such information as a full Explorer report.
Start your consultation with the Hardware team in techsupport, though you may get transferred to the Kernel group.
If they find it is a hardware issue, then a systemboard will need to be replaced.
If they find the issue is that you're just downrev on your patching, you'll have to apply a full patch bundle to get better error trapping and ecache clearing.

CPU Errors---Remedy Required

Hi,
I am getting the following messages
Apr 3 01:02:42 asad SUNW,UltraSPARC-II: [ID 676844 kern.info] [AFT0] Corrected Memory Error detected by CPU3, errID x0003d9ea.9e8a595c
Apr 3 01:02:42 asad AFSR 0x00000000.00100000<CE> AFAR 0x00000000.15297668
Apr 3 01:02:42 asad AFSR.PSYND 0x0000(Score 05) AFSR.ETS 0x00 Fault_PC 0x10025d44
Apr 3 01:02:42 asad UDBL Syndrome 0x31 Memory Module 1801
Apr 3 01:02:42 asad SUNW,UltraSPARC-II: [ID 289034 kern.info] [AFT0]
Can anyone help me what type of errors are being occurred & its remedy?
Thanks.
Regards,
Faisal

"Apr 3 01:02:42 asad AFSR 0x00000000.00100000<CE> AFAR 0x00000000.15297668
Apr 3 01:02:42 asad AFSR.PSYND 0x0000(Score 05) AFSR.ETS 0x00 Fault_PC 0x10025d44
Apr 3 01:02:42 asad UDBL Syndrome 0x31 Memory Module 1801"
cpu#3 is telling you it has noticed a problem with the DIMM in slot 1801.
The probability of it being serious, is a 5% chance (Score 05).
Since it is a Correctible Event, ( <CE> ) you should monitor the system,
until it becomes an Uncorrectible Event ( <UE> ).
Then you can replace that memory module.
.... or just replace it now and be done with it.

MSI K9A2 CPU Error. Failed Overclocking....

hi, i was wondering if anyone can help me this this random problem i jus encountered.
I own a MSI K9A2 platinum MB and i have never gotten any problems with it until now.
when my pc boots up i get an error in red saying "Warning!! The previous performance of overclocking is failed. the default setting has been restored, press any key except del to enter setup"
however when i try to press any key it doesnt work. nothing i do worked. at first i thought there was a missconnection with the keyboard because it was wirless so then i tried a wired 1. and still nothing works. i even connected the USB keyboard to the PS/2 pin connector using a adapter but still nothing works.
i donno if there is a misconnection wit my keyboard or if my CPU has blown out. but i dont ever remember overclocking my CPU. i have no clue how this problem happened. does anyone know where i should take it form here? any help will be appreciated . thank you.
here is a basic list of my hardware, im sorry if i cant be more detailed i am currently at work:
AMD Phenom 9500 64-bit Quadcore
K9A2 Platinum
OCZ DDR3-1066MHZ (3x2GB) 6GB total
Radeon 512MB (sry dont know the exact model #)
Seagate 500GB SATA harddrive
Microsoft Windows Vista Home Premium SP1 32bit
600W power supply(sry dont know the brand)

Read >>Posting Guide<<

MSI kt400 and xp2400 cpu error

Hello all,
Can somebody give me some advice on how to get my MSI Kt400 to recognize an XP 2400 cpu? At first the motherboard was recongizing the cpu fine. I was in windows xp and everything. Then my system began shutting down on it's own while in windows XP. It would reboot itself and the LED would display the 4 red lights meaning "error initializing CPU". After uninstalling the CPU several times, I naturally thought I had burnt my CPU. Well I purchased another CPU and when I carefully installed this one...it gave me the same 4 red LED lights.
I've already returned this board once to MSI for memory problems now I'm having CPU issues. Can someone please give me a solution to this problem. If all else fails is it possible that I may request another RMA for this board. I've had it since December and I haven't been able to get it up and running yet.
PLEASE SHED SOME GREEN LIGHT!
Desperate user,
J

here is a stupid one:
is cmos jumper in its place? or in wrong place?
and i did read last year how someone did pull off the cpu and try to boot copmuter in order to fix some problem with cpu, - someone might remember this maybe and tell you more as i dont remember, it was something strange thats why i remembered and now im wondering what it was ?(
PS
am sure it should be something simple u just need to cool down and have another look - good luck man )

How to detect CPU error in SMP system?

I want to monitor if the CPU is working properly in real-time, especially at SMP system. My goal is to build a program that shows "CPU n is working properly" and if one is down, showing "CPU n down".
Is there pre-defined C function I can use? Or is there better one?

I think that kstat() does such a function, but for SMP system, how does it work? Is there a certain way to specify CPU?

K7N420 problem: CPU error on booting

4 red diods on the D-Bracket on power up after reflashing from BIOS 2.50 to 2.40. CPU and memory are good on over MB.
Recover process can't start. How to recover this problem?

hi
try clearing the cosmos
make sure the power plug is turned of
do not turn back on till jumper is in the original position again
note were jumper is well as manual is normally wrong
if it still refuses try again but also remove the battery and leave over night,again put it all back before turning the power back on
after that conntact msi for a new bios chip
ive a feeling they wil need a few
please post requested details in the sticky at top of forum

Panic[cpu7]/thread=30000375d00: Can't invoke , error 2

Hi,
I am trying to install Solaris 9 into an Ultra Entreprise 3000 (client) from a JumpStart server. I did setup this new client with add_install_client, updated rules, sysidcfg and profiles, etc. ,but the client always stops with a "panic cpu" error message.
Requesting Internet address for 8:0:20:83:b9:4
Internet address is: (Address IP)
hostname: test5
Found 192.168.166.171 @ 8:0:20:83:b5:16
root server: test3 (Address IP)
root directory: /jumpstart/solaris_9/install/Solaris_9/Tools/Boot
Size: 0x5d91b+0x14bb5+0x2563f Bytes
SunOS Release 5.9 Version Generic_117171-07 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Ethernet address = 8:0:20:83:b9:4
Using default device instance data
mem = 524288K (0x20000000)
avail mem = 491601920
root nexus = 4-slot Sun Enterprise 3000
sbus0 at root: UPA 0x2 0x0 ...
sbus0 is /sbus@2,0
sbus1 at root: UPA 0x3 0x0 ...
sbus1 is /sbus@3,0
SUNW,hme0 : Sbus (Rev Id = 22) Found
hme0 at sbus1: SBus1 slot 0x3 offset 0x8c00000 and slot 0x3 offset 0x8c02000 and slot 0x3 offset 0x8c04000 and slot 0x3 offset 0x8c06000 and slot 0x3 offset 0x8c07000 SBus level 4 sparc9 ipl 7
hme0 is /sbus@3,0/SUNW,hme@3,8c00000
Requesting Internet address for 8:0:20:83:b9:4
SUNW,hme0 : Internal Transceiver Selected.
SUNW,hme0 : 100 Mbps Full-Duplex Link Up
Found my IP address: c0a8a6ad (IP Address)
hostname: test5
whoami: no domain name
root on test3:/jumpstart/solaris_9/install/Solaris_9/Tools/Boot fstype nfsdyn
fhc0 at root: UPA 0x6 0xf8800000
fhc0 is /fhc@6,f8800000
ac0 board 3 bank 0: base 0x0 size 256mb rstate 2 ostate 1 condition 1
ac0 board 3 bank 1: base 0x40 size 256mb rstate 2 ostate 1 condition 1
ac0 is /fhc@6,f8800000/ac@0,1000000
fhc1 at root: UPA 0x2 0xf8800000
fhc1 is /fhc@2,f8800000
ac1 is /fhc@2,f8800000/ac@0,1000000
central0 at root: UPA 0x1f 0x0 ...
fhc2 at root: UPA 0x0 0xf8800000
fhc2 is /central@1f,0/fhc@0,f8800000
sysctrl0 is /central@1f,0/fhc@0,f8800000/clock-board@0,900000
sysctrl0: Key switch is in the secure position
environ0 is /fhc@6,f8800000/environment@0,400000
environ1 is /fhc@2,f8800000/environment@0,400000
simmstat0 is /fhc@6,f8800000/simm-status@0,600000
sram0 is /fhc@6,f8800000/sram@0,200000
zs0 is /central@1f,0/fhc@0,f8800000/zs@0,902000
zs1 is /central@1f,0/fhc@0,f8800000/zs@0,904000
cpu6: UltraSPARC-II (portid 6 impl 0x11 ver 0x11 clock 248 MHz)
cpu7: UltraSPARC-II (portid 7 impl 0x11 ver 0x11 clock 248 MHz)
panic[cpu7]/thread=30000375d00: Can't invoke , error 2
000002a1001a5a40 genunix:icode+284 (1444c00, 0, 1438a38, 30000379438, 16, 0)
%l0-3: 00000000ffbfffec 00000000ffbffffb 0000000000000000 0000030000b35c08
%l4-7: 0000000000000000 00000000ffbffffc 00000000014579d0 0000000001457800
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Resetting...
Software Power ON
Could anyone please help ?
Many thanks, regards.

Check the ports of Web services and those of BPEL, as Hambo have different communication ports.
Normally Webservices point to the port 8080 and BPEL to 18181 or 9084.
Check and I accounts.
Greetings.

1 blink led error code or not?

On my dv7, I'm getting what appears to be error code 1, 1 blink which means cpu failure. I am not sure however if it is 1 blink or just blinking forever. It goes 1 blink, 1.5 seconds pass another blink and it keeps doing this forever, it does not stop. I would just like confirmation if this is 1 blink or not?
Pavilion Dm4 1165dx
2.4 ghz Core i5 M450
7200 rpm 500gb hd
4 gb ddr3

well based on what you said if there is an interval of 1.5 seconds and if its the capslock/numlock which is blinking then yes thats for the CPU ERROR. Try checking with hp tech maybe your still in warranty..
Please hit the KUDOS star if my post was helpful..

COMPAQ CQ61z-300 CPU

I have a COMPAQ Presario CQ-61z-300 that I think has a bad CPU. Won't boot up at all. When power is turned on the fan runs but the COMPAQ flash screen does not appear. CAPS LOCK and NUM lights flash once, which tells me CPU error. What I need is info on the CPU. Manual only shows INTEL CPU's, but here is an AMD 'VISION' sticker next to the mouse pad. I need the info so I can try and order one. Info for this computer is not available online because it is a 'CTO' and I cannot get the info from the computer itself because it is dead. Any help would be appreciated.

Odds are strong it is not the CPU but the motherboard. CPUs very rarely fail but motherboards fail frequently. The motherboard part number should be inside the memory compartment. Here is the Service Manual:
Manual
System board options:
System board (includes replacement thermal material)
■ With media card and HDMI support, for use with UMA systems 577065-001
■ With support for media cards but not HDMI, for use with UMA systems 577064-001
■ With no media card or HDMI support, for use with UMA systems 585923-001
■ With media card and HDMI support, for use with discrete systems 577067-001
■ With support for media cards but not HDMI, for use with discrete systems 577066-001
It will be one of the above numbers.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Mobo and NO CPU

all,
3 questions? (1) what happens when you have a healthy KN8 plat system without a CPU when you attach power to the PSU? (2) same as 1, but assume PSU has been plugged in and you then hit the power switch (again no CPU) ? (3) if the system turns over (from no 2) does the bios post with a CPU error ?
Thanks in advance,
ventura

tire,
this was a hypothetical question to see what a healthy system does...that being said...I have another thread about my current problem that is call "is this a bad board"
MY (2nd RMA, that fails differently then the original) system has 4 red LED's....as soon as you plug in power to the PSU the whole case powers on without hitting the power switch (drives, LED's ect)
but the bios does not post, and the vdo card and CPU do not get warm. I have pulled the CPU and the same behavior happens.
the long and short of it is this: I am trying to determine if my mobo or CPU is the issue. I think mobo (based on the fact the the power/reset buttons are not working and none of my componets are heating up) but knowing the answer to the oringinal questions (specifically 1 and 2) will assist greatly in knowing if I should send my processor out to AMD for replacement also
Thanks
Ventura

G580 Energy Management annoying CPU warning popups

Hi, i have a new G580 Laptop with Windows 7 64bit
i have a problem when i am on battery (not connected to AC), every few minutes a message pops and warn me about a high CPU usage. is there any way to disable this popups?
Thanks!!!
here is a screenhots of the popups:
Technical Details:
Lenovo G580 (20150)
Windows 7 64bit
Lenovo Energy Management 7.0.3.4
Sorry for my bad english

Hi there,hello MclarenII and all with this problem.
I had same problem with new LEM- Lenovo Energy Management from Lenovo website.But now is preety fine.
After couple times reinstaling my system i'm find out how to do Now works superb with AC plugged or unplugged (battery).No any CPU errors like before 70%,100% ,60% after couple 5 to 20 sec.
Time for solution for G580
Solution for you is Fresh Re-install Win7 and put drivers in correct order like this:
1.Chipset
2.Lem 7.0.3.3 not higher!!! This is Lenovo Energy Management Virtual ACPI
3.Mei-Management Engine Components for Intel
4.Irst-Intel (R) Rapid Storage Technology
5.Intel Vga
6.Nvidia
7 .Audio
8.Lan
9.Card reader
10.WiFi
11.TouchPad
12.Bluetooth
13.Camera
This is correct order to driver instalations for Win7 64/32
My own secret formula for instalations without any errors of CPU warning.
100% correct
p.s
The Lenovo Energy Management 7.0.3.3 (ME-management energy) is on Lenovo CD Drivers for G580 (20150).
If someone need, please request me for it.
that's all

Creat xilkernel bsp (lwip in socket mode) but product error:'MAX_SEM' undeclared here

hello everone：
I have a microblaze-based（include axi4、MCB_DDR2、axi_intc、axi_ethernetlite、axi_timer ang so on ）product running on a spartan-6 FPGA which uses lwip on the xilkernel (lwip in socket mode).But，i can't create the bsp ,because there are something wrong with it.
"Compiling lwIP adapter for Xilinx MAC"
contrib/ports/xilinx/sys_arch.c:63:35: error: 'MAX_SEM' undeclared here (not in a function)
make[1]: *** [contrib/ports/xilinx/sys_arch.o] 错误 1
make[1]: 由于错误目标“libs”并未重新创建。
"Compiling cpu"
ERROR:EDK:369 - make failed for target "libs"
ERROR:EDK:3418 - Error(s) while running make.
make: *** [microblaze_0/lib/libxil.a] 错误 2
make: 由于错误目标“all”并未重新创建。
what should i do to solve it. Thank you in advanced.

hi gy343279479
glad to know that the issue is solved. please mark the post as solved. this can be a reference to other users.
--hs

X4150 CPU Error

Similar Messages

Maybe you are looking for