X4150 disk lights.. still don't work

Last night we upgraded from ELOM to ILOM. Thank god everything went okay, I was very afraid of it. Love the new power distribution/usage feature.
One of the things we were hoping to get fixed with these firmware upgrades is the HDD lights. They still don't work. Is there a specific kernel patch that is needed for them to work? They've never worked from day 0, when we bought the system back in 2008.
Thanks!

Looks like I might need to upgrade the firmware on the disk backplane as well as newer HBA controller firmware.
I found the backplane firmware tools&drivers ISO, but where can I get the LSI 1068E firmware? This is on Solaris. I guess I will need to build a OpenSolaris USB boot and upgrade through raidctl from there.
Thanks

Similar Messages

  • I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas?

    I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas? Thanks.

    yep, unfortunately can't reset without the passcode either.
    With regards to doing a restore, do you mean:
    open itunes on my computer
    click on my device on the left
    go to the device summary
    click restore
    it then asks if i want to back up before i restore (to which i say no)
    then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
    then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
    Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this!

  • License installed: Memleak & JRA Recording still don't work on remote srv

    This a JRockit 28.1.1 version on a remote server.
    As noted, a "LIC-JRMC50" license has been installed into its jre, but the memory leak and jra recording functions from the local xp based Mission Control 3.0.5 still don't work.
    The connector to the remote server is working, as I can open console and see its workings.
    When attempting to start Memory Leak an error is shown:
    Caused by: javax.management.InstanceNotFoundException: bea.jrockit.management:type=MemLeak
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
    When trying to start JRA Recording a message is shown that says something like "No Options could be retrieved for this connector. Make sure you're connected to a Jrockit instance..".
    Any suggestions would be appreciated.

    JRockit 28.1.1 should work better with Mission Control 4.0.1 (which should be bundled together with JRockit R28.1.1)
    JRockit 27 versions use JRA, JRockit 28 versions use FlightRecorder instead.
    Mission Control 4.0.1 requires not license file.
    Klara, Mission Control QA

  • [SLVD?]Openoffice fonts have bad spacing, hair spaces still don't work

    Compare the first pic of Times New Roman in Openoffice, with the second pic in mousepad. (They are both size 12, I have no clue why the Openoffice one is smaller than the mousepad one.)
    The spacing between the letters in the Openoffice version looks funny for some reason. You can really see the difference at the "as I cannot" and "example".
    Why are the Openoffice fonts like this? Is there any way to make them normal? I have tried using other fonts, but Liberation and DejaVu also exhibit the same behaviour.
    EDIT: Also, hair spaces don't work in Openoffice.
    EDIT2: I realized that Openoffice was at an 83% view, and at 100% view it looks better.
    Hair spaces still don't work though.
    Last edited by sokuban (2009-10-08 15:36:20)

    Some fonts don't support hair spaces. I have only checked a few fonts, but so far none of the MS fonts contain the hair space, U+200A. Times New Roman, Courier New and Arial don't have that glyph.

  • Cannot update itunes10.6.3.  I get no errors. I repaired all of the apple programs and it still don't work.  Acts like it wants to start but doesn't.  Thanks in advance

    I cannot updated itunes 10.6.3.  I receive no errors.  I repaired all of the apple programs as suggested in other discussions but it still don't work.  Do I need to uninstall and start over again?

    Initially I received the usual message to update.  I replied to it but it did not respond.  I then tried to manually  update through iTunes and it did nothing.  Only reaction I get is that the cursor "flutters" for a second and than tries to go to the store for maybe a second and than nothing else happens.
    With that one, try updating using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    Does that go through any better for you?

  • Blackberry app world asking for username & password, but after many tries still don't work

    when I wanted to go to my app world it asked me for my blackberry id username and password, well this I know, I typed in the username it said type in "emai", and I typed in the email address I always use, and the password, but still not working, all that it keeps saying is "type in the username associated with this device" well it seems the password then is correct, but why is it complaining about the username-email address I've always used the same email address, I checked spelling everything, but still don't want to work, it only gives you 10 try's and after 10 its blocks the appworld, and then it waits 15min then you can try again, but I have tried everything now, but still don't work, I have reset password, changed password, but it does not seem that the problem is with the password, but with the Blackberry Id-username-emaila I have to use, and I have no other email that I used before, just this one always, can anyone tell me what I can do...that my appworld can work again please.

    when I wanted to go to my app world it asked me for my blackberry id username and password, well this I know, I typed in the username it said type in "emai", and I typed in the email address I always use, and the password, but still not working, all that it keeps saying is "type in the username associated with this device" well it seems the password then is correct, but why is it complaining about the username-email address I've always used the same email address, I checked spelling everything, but still don't want to work, it only gives you 10 try's and after 10 its blocks the appworld, and then it waits 15min then you can try again, but I have tried everything now, but still don't work, I have reset password, changed password, but it does not seem that the problem is with the password, but with the Blackberry Id-username-emaila I have to use, and I have no other email that I used before, just this one always, can anyone tell me what I can do...that my appworld can work again please.

  • Kensington, Deja Vu, Typeit4me still don't work, even w/ 10.4.5

    The update seems to have gone smoothly, but the software for my Kensington trackball, the back-up Deja Vu sofware, and Typeit4me all still don't work.
    Oh well.

    Even when all other apps are running I have no menu bar icons. The big problem is the system prefs don't respond to me wanting to show them in menu bar. I can click the box to show them, close the window, and then when I go back into the pref pane the box is unchecked.
    Ryanhall

  • My back/forward buttons don't work - have done 'reset toolbars and controls', but they still don't work

    When I downloaded the latest version I got a new screen with the orange Firefox tab at the top. That was fine, I could find what I wanted, but back/forward buttons didn't work. I checked the help section and went right through the suggestions down to 'reset toolbars and controls' - this did reset and I lost the orange box - that doesn't matter, but the back/forward buttons still don't work.

    Do you have more than one tab open? If you didn't go to another site in a single tab, then yes, the buttons will be greyed out. If you went somewhere in another tab, then those sites should be accessible by right clicking either button.

  • After I downloaded ios 7 all my music won't play I deleted them all and redownloaded them and they still don't work how do I fix this

    I need help how do I get my music to play after downloading ios 7 i redownloaded them and they still don't play

    I'm having the exact same issue where the songs appear but will not play.  There is the red circle and square.  I have reset and restored the iPhone 5 to no avail and is making the phone useless for playing music, podcasts or audio books.  I am now having to carry an iPod around again to listen to my audio content. 

  • Bug: Copy and Paste shortcuts still don't work

    Copy and Paste shortcuts still don't function.  I have to manually go to the menu to copy and paste.  Is this being addressed? This is a basic function used often.
    Mac OS X 10.7.5
    Adobe Story Plus: Build 1196
    When I started software AIR updated.
    Appreciate the help.
    Best,
    Randy

    Hi Randy,
    Can you please let us know if you still observe this issue after upgrading to latest version of Adobe AIR?
    You can download the latest version of AIR from: http://get.adobe.com/air

  • Unable to write to External Hard Drive, Disk Utility options don't work.

    I am a recent new user of Apple Mac from when I bought this Macbook Air 3 months ago.
    Nice machine, but difficult to get the hang of.
    Specific problem I'd like help with please is to enable me to write to my Samsung S2 Portable Hard Drive (500GB)
    I can see it and read files, but can't save to the EHD.
    In Disk Utility, all options to verify and repair the EHD are greyed out. So, most of the friendly suggestions on other threads don't help me.
    I don't know how big the hard drive is on my Macbook (nor how to find out), or how much remaining space there is, but there is over 400GB of data on the EHD.
    The EHD is in NTFS format, all data on it was from Windows computers. There isn't space on my Windows laptop for all this data.
    I don't have another EHD, so have nowhere to move the data to if I have to reformat the EHD.
    On another thread I saw a suggestion to uninstall something or other before reformatting the EHD, but I don't even know how to uninstall programs on a Macbook.
    I don't know why Apple have to spoil such a great machine by making it so difficult for non-afficionados to use (sorry, frustrated).
    I say "great" because it's so light it makes work much easier. I can carry it around all day with little effort and don't have to take the charger to work.
    Any help anyone could offer with the EHD will be appreciated.
    Thanks...........

    Hi Limnos,
    Yes, I'm new to Mac, having bought this Macbook 3 months ago after years of Windows (as stated in my original post).
    I still have a Windows laptop and all my work colleagues currently use Windows, so I need compatibility with both.
    Paragon sounds like a good option, and I don't mind a bit of cost if it sorts the problem.
    Hopefully I'll get feedback from someone who has used Paragon and can report how effective it is and whether or not there are any problems asociated with it.
    Good tip thanks about the Disk Utility, I'll look into that.
    Thanks........

  • Reset SMC but Screen Brightness Keys still don't work

    hi all.
    i noticed after squinting at the screen all day yesterday that my screen brightness keys F1 and F2 on my mac pro keyboard are not working.
    first thing i did was look in the UI for some kind of manual setting like for the Sound and i was not able to find one so the screen is still a bit dark for my needs.
    then i /unchecked/ the "Use Function Keys as..." box in the Settings in case something was screwed up or changed there.
    then i reset the SMC controller which i basically did by default (as i understand it) by shutting down the computer and unplugging it overnight during a thunderstorm.
    now i am back at trying to solve this and i am wondering if i should reset the PRAM which i guess i will do but i don't want to have to bother with resetting all the settings on this if i don't have to.
    any ideas on what may be going on? i have a 23" cinema display and a Mac Pro 1,1.
    THANKS

    Direct you to the proper forum for MacBook :
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    Resetting the System Management Controller (SMC)
    Summary
    In some situations, you may need to reset your computer's SMC.  Learn how to identify these conditions and reset the SMC.
    Products Affected
    Desktop Computers, Portable Computers
    Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue, however, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC.  Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
      If your Mac appears to be running normally but isn't responding, force the computer to shut down by pressing and holding the power button for 10 seconds. Note: You will lose any unsaved work in any open applications.  For Mac portables experiencing issues related to the MagSafe power adapter and/or battery, try:
    Unplug the MagSafe power adapter from the Mac and the wall power socket for several seconds.
    Shutdown the Mac. Physically remove and re-insert the battery (if it's removable) and startup the Mac.
      If the issue is still not resolved after following the troubleshooting items above, an SMC reset may be necessary.  After performing normal troubleshooting, these symptoms may indicate that an SMC reset may be necessary:
    Fans
    The computer's fans run at high speed although the computer is not experiencing heavy usage and is properly ventilated.
    Lights
    The keyboard backlight appears to behave incorrectly (on Mac computers that have this feature).
    The Status Indicator Light (SIL) appears to behave incorrectly (on Mac computers that have an SIL).
    Battery indicator lights, if present, appear to behave incorrectly (on portables that use non-removable batteries).
    The display backlight doesn't respond correctly to ambient light changes on Mac computers that have this feature.
    Power
    The computer doesn't respond to the power button when pressed.
    A portable Mac doesn't appear to respond properly when you close or open the lid.
    The computer sleeps or shuts down unexpectedly.
    The battery does not appear to be charging properly.
    The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
    System Performance
    The computer is running unusually slowly although it is not experiencing abnormally high CPU utilization.
    Video
    A computer that supports target display mode does not switch into or out of target display mode as expected.
    A computer that supports target display mode switches into or out of target display mode at unexpected times.
    Resetting the System Management Controller (SMC)
    Resetting the SMC on Mac portables with a battery you can remove
    Resetting the SMC on portables with a battery you should not remove on your own
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Additional Information
    The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs. These functions include:
    Responding to presses of the power button
    Responding to display lid opening and closing on portable Macs
    Battery management
    Thermal management
    The SMS (Sudden Motion Sensor)
    Ambient light sensing
    Keyboard backlighting
    Status Indicator Light (SIL) management
    Battery status indicator lights
    Selecting an external (instead of internal) video source for some iMac displays
    https://support.apple.com/kb/HT3964

  • 27 inch. audio jacks replaced twice. still don't work??

    i have a 27 in snow lepard ..audio jacks at back do not seem flat...jacks don't go in properly...wont hook up to receiver
    they have been replaced. still the same..bought new wires. just in case...tested everything with other products fine..
    anyone else have any other probs like this??
    ready to get rid of this

    Thanks Bob for that very fast reply!
    But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
    Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
    Thanks and Bye!
    smax
    Last edited by smaxer (2008-12-09 17:42:43)

  • How to make an ipod classic get off the apple boot logo when the menu an center button still don't work

    i tryed to connect my ipod classic to my computer an every time i do it will start flikering an when i conected it to a wall plug it just get stuck on the boot logo it had the the red x but i fix that but now its just stuck on the boot logo i need my ipod please tell me what i need to do pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeee

    The big Red X is a sign of iPod undertaker coming, so you only have temporary extension and put it in Comatose state.
    Some laptops have only one high power USB 2.0 port, so if it flickers, try the others on your laptop.
    However try the following, (bear with me if you have done all these.)
    Toggle the hold switch, make sure you don't see the red marking.
    Press Menu and Center butoons for about 10 secs till the Apple logo comes ON, then release the buttons.
    If the above solve the frozen Apple Logo, then do a Disk Diagnostics, read this earlier post from tt2.
    https://discussions.apple.com/message/17028567#17028567
    Don't worry if yours is Windows, the process apply to the iPod and not the PC.
    Good Luck

  • Went to beta 4 and want my extensions back, went back to 3.6, they still don't work, adblock plus, clippings, flashblock...... help !

    I had firefox set the way I wanted it, saw beta 4 was out, installed,, none of my extensions worked, biggest one I need is adblock + and clippings. I can not stand the time it takes to load web pages with all the ads coming up, and I have most of my paswords saved in clippings.
    I can not remember some of the paswords to log on and pay bills and such, I need them back. I went as far as uninstalling beta 4 and went back to 3.6 and still nothing. no updates available, but they worked before, and worked quite well.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Maybe you are looking for